Can you restrict creation of user types in Portal?

Hi,
Is it possible to give a group of users the ability to just create 'Vendor' accounts in the Portal?
While another group of users the ability to just create 'Contractor' accounts in the Portal?
...and other group of users to create just another 'type' of users in the Portal?
Thanks,
Sk

Humm, it's seems a bit complex but try to based your drop down over a new object "UserType".
See
http://theidentityguy.blogspot.fr/2011/07/populating-rcdc-dropdownlist-with.html
After that gives the right to view only object UserType "Vendor" for the set "All admins of Vendor"
I never try this, it's only an idea :)
Regards,
Sylvain

Similar Messages

  • How can we restrict creation of enquiry VA01 plant wise

    How can we restrict creation of enquiry VA01 plant wise
    Pradeep

    Hi Pradeep,
    You can restrict through the user exit.
    MV45AFZZ ( MOVE_FIELD_TO_VBAP).
    Check the entered plant here and the user name.
    Make a custo table with plant and user name combination.
    Make a select query to check with the custom table entries.
    If it fails , give an error message and exit from the screen.
    Hope this helps.
    Regards,
    Deepak Kori

  • Can you have two different users with itune accounts on the same computer?

    Can you have two different users with separate itune accounts on the same Ipad?

    Yes, create another user profile on the computer and each user can log into their own profile that way.

  • Can you set up multiple user accounts on one laptop?

    can you set up multiple user accounts on one laptop?

    Of course.
    And instructions can depend on which OS X is installed.
    For v10.7 Lion > OS X Lion: Create a new user account
    For v10.8 Mountain Lion > OS X Mountain Lion: Create a new user account
    When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 

  • I Have office for mac home and business 2011, can you install on both users on one iMac?

    I Have office for mac home and business 2011, can you install on both users on one iMac?

    That's often a permissions problem. Try launching Disk Utility and running the Repair Permissions. That may fix the problem. Also confirm that the Office 2011 folder is in the Applications folder at the root of the hard drive, not a folder within your wife's Home folder.
    If that doesn't help. post back with further details; your version of Mac OS X, whether you installed Office via a user account with admin privileges or not, and what happens when you try and launch Office from your account including error messages if any.
    Hope this helps.

  • Can you transfer only a users account settings on a new mac?

    I am wondering if you can get a new mac and transfer only the old macs user account settings without the applications or any folders of any other user. also can you transfer only that users music and pictures and everything?
    Thank you,
    Caleb

    Migration assistant (it's an applications/Utilities) gives you an option to transfer individual accounts, applications and other data. you can choose to transfer a single account. This will transfer the whole home directory of that account. You can't pick and choose which folders in the home directory you want to migrate. if you want that kind of control - migrate by hand.

  • How can we restrict the other user to add their user id's to the user group created in SQ03?

    Hello All,
    How can we restrict the other user to add their user id's to the user group created in SQ03?
    When we enter the user group name and click on "Assign users and Infosets" button in the attached pic "User Group" .
    I was able to enter my user id in other user groups. How to Grey out the other rows in the attached pic "User Group 1".

    How strange I answered (or at least helped) this very same question earlier today. Here the link to my previous answer then:
    http://scn.sap.com/thread/3536135

  • How can i restrict the selecting file type to XML and TXT in file upload..

    Hi,
    I am using Struts Upload Bean. I am also using html:file tag in the JSP. Now when i click on the browse button, A file dialogue window appears. The problem id the i want to show only text and xml files in the dialog box. Now the files of type combo box in the dialogue box is showing *.*, *.html, *.pictures (jpg/gif) options. In place of this i need to show only txt and xml files. How can i restrict the file type to XML and TXT
    Regards,
    Sudheesh...

    Hi,
    the demo doesn't keep track of this. If you want then this feature isn't implemented. You will also see that the document is uploaded in a directory without changing the file name (e.g. adding the SR number). This however can be done and would be the way to do it
    Frank

  • Creation of user type

    hi
    i am trying to create a user type AGENT. i did it but when user created and assigned to AGENT. when i click on submitt button it showa an error
    IAM-3050056 : The specified value Agent for attribute Role is not one of the predefined values
    please solve the problem. and tell the process how to cretae in 11g
    regards
    avinash

    After adding this value in Lookup, you need to restart of OIM server is nee ded

  • Global Variants- can you restrict them?

    I know that in finance you can control who has access to global variants by an authorization object.  However, with the rest of the modules (mainly PM, MM) how do you restrict the global variants so they can not be edited?

    Perhaps you would like to post your solution, so that others who use the search can benefit from it.
    (please use a few technical terms like the objects and PIDs to help the search..)
    I have a faint suspect that a rather lively discussion around the topic cannot be excluded...
    Cheers,
    Julius

  • Forums module can you have a logging user return to where they were?

    If a non-logged in user is looking at forums topics and finds one they want to comment on. They are asked to log in but are jumped into the general secure zones user area. How can you have them return to the forum topic they were on? I have used a hack to give them a button to return to the page they were on but it only works 50-50 as the trick goes back to a page in a state before they were logged in so the browser doesn't always see them as logged in.
    My litte button script is below that just uses the browser history.  Any help would be great.
    I heard there is a tutorial in bcgurus i might look at later but if there is anything out there besides that I am all ears.    Retun to the Page I was at.                     Go BackGo back to where you were when you logged in.

    Does anyone have any advice for this? So far not having any luck.

  • Can you "share" photos between users?

    quick, likely dumb question - we're new to the mac:
    my wife and i are set up as two users with password log-in, etc. yesterday, she uploaded all of our photos to iPhoto on HER account; how do i access those photos on MY account using iPhoto?
    thanks for your help in advance.

    Welcome to the Apple Discussions.
    There are two ways to share, depending on what you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
    Quit iPhoto in both accounts
    Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a Disk Image or even partition your Hard Disk.
    In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Finally: If you’re comfortable in the Terminal, and understand File Permissions, ACL’s etc., some folks have reported success using the process outlined here . (Note this page refers to 10.4, but it should also work on 10.5). If you’re not comfortable with the terminal, and don’t know an ACL from the ACLU, then you’re best doing something else... Oh, and the warning about simultaneous users still applies.
    Regards
    TD

  • How to restrict Basis from User admin in Portal

    Hi,
    Iam looking to delete action Manage ALL action from Administrator role and add ReadALL so that basis is not given access to User admin in Portal. we already have Manage_All in a role that is assigned to security. However iam not sure of the problems. please advise if there would be any problem in tweaking the Administrator role as these are standard UME roles.
    Thanks in advance.

    Hi,
    Please try to modify User adminitrator role in the portal.
    Content Administrator>>Portal Content>>Content Provided by SAP>>Admin Content>>User Administrators>>Right click on "User Admin" role >>Permission>> IN "Everyone" Group, Uncheck the 'End User' column. then SAVE your permision.
    Hope this will helps you to resolve your issue.
    Thanks
    Arun Jaiswal

  • Can you restrict a user in ASDM to only allow them to log a user out of a VPN session

    We support many clients and we have found that many of them are sharing VPN credentials when logging in via AnyConnect/WebVPN. We were thinking about restricting simultaneous log in to 1. I also know that users may have situations where they lock up a session due to ISP or PC issues and won't be able to connect again until that session drops from the ASA. We would like to enable our helpdesk to log in to the ASA via ASDM and be able to logout a user that has an active connection. This would be in the logging area of the ASA where they could highlight a user and click logout. Is it possible to restrict a user to just this and not allow them to make any other changes to the ASA?

    You should be able to do that. You would create a new privilege level (ie 7), assign all commands to that level except (this is my guess) the command vpn-sessiondb, you would put that at a lower privilege level (ie 6). Here's a write-up that may help getting you in the right direction.
    http://www.packetpros.com/2012/08/read-only-asdm.html

  • Can you restrict APEX users to a single browser session?

    I'm using APEX3.2.1
    Is there a package,function, view or table in APEX that can be checked to see if a user_id
    already has an active session (one that hasn't been purged yet).
    I wish to restrict each user to a single active browser session.
    Cheers
    dfrost

    Hi Roel
    I've had a look at the views and it looks to be exactly what I'm after thanks very much for your help.
    I've only been working on APEX a short while the info on the forum and all the expert blogs are of huge help.
    Thanks
    Derek
    Australia

Maybe you are looking for