Cancelling WIP Job after completing the job

Hello Everybody,
There is an issue as to 'Cancelling WIP Job after completing the job'
Please let me know how to resolve this or the workarounds.
Provide me the navigation please.
Thanks

Hi abdul;
Please check this and also Note:WIP Purge FAQ [ID 605621.1]
Hope it helps
Regard
Helios

Similar Messages

Why won't compressor let me submitt the job after sending the job from Final Cut?

Having problems with compressor. Does not let me submitt my job. I sent the job from Final Cut to Compressor. I set up destination, settings. When I hit th submitt button it's grayed out. Can anybody help. I'm running compressor 3.5.3. And Final Cut Pro 7.0.3.

HI do you have Fcp-x, Compressor 4 and motion 5 on your system as well
just need to ask to get that out of the way first
thanks
g

Waiting for scheduling job to complete. Job ID...and it never completes

I have created my first Publication. It's a pretty basic single source document, single Dynamic Recipients list publication.
When I run it in Test mode (I haven't tried it in non-Test mode yet), the document(s) are never delivered.
When I view the Log File, everything looks fine. The second and last entry in the log says
"- The global delivery rule for this publication was met; publication processing will now begin."
The Status Message I see in the Publication History is:
"Waiting for scheduling job to complete. Job ID:3,879, name:Unviewed Invoices Report (Copy), kind:CrystalReport in Pending state (FBE 60509) [0 recipients processed.] " and it never changes. I've tried this several times, creating new publications with the same source documents, and the same thing always happens.
Any help would be appreciated.

All of the servers were configured correctly.
It turned out to be my source document, a report, had some field in it that BOE didn't like.
I removed a bunch of fields and added them back, one by one, and couldn't make the error occur again.
Go figure.

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

Problems printing a converted PDF which was converted to Word after completing the form

Problems printing a converted PDF which was converted to Word after completing the form. I have spent the last 3 hours trying to figure out what I am doing incorrectly. I can't get it to print in either the PDF or Word file. Please help, I need to complete this form and sent it NJ Department of Motor Vehicles Commission.

Hi, make sure you are using the latest release of PDF program.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Whenever i use pencil tool after completing the fig. the color change ............

I am new to adobe flash cs3 . whenever i use pencil tool after completing the fig. the color changes to green .. even though the box indicates black color ..

See if you have outline mode selected for that layer, or if you have it set for the file.
For the layer look at the last icon on the layer, the small square icon. If it appears as a solid it is not in outline mode, if it appears as an outline of a square, click it to change it to be solid.
For the file level, in the main toolbar choose View -> Preview Mode -> and make sure Outlines is not selected.

HT201442 My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 min

My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 minutes).Someone help me as I'm using the original iPhone 3 at the moment and it won't even take an ios 7 update!

Just to confirm on the screen of the iPhone do you see the itunes symbol with a cable pointing up to it?. If you do then your iPhone is inrecovery mode and would require you to restore it.
Now first you want to make sure iTunes is up to date and the cable you are using is not damaged. You also want to make sure iTunes is up to date.
Now if you get an error message then follow the article below to find out what causes the issue:
http://support.apple.com/kb/TS3694
In terms of the iPhone 3G that is definitely not able to update to iOS 7. Only the iPhone 4 and larter can update to iOS 7.

HT202157 I updated my 2nd gen apple tv and after completing the downloading and installing the software I got an itunes picture that means i have to connect it to iTunes,, can i skip this ? coz i don't have the mini usb cable

I updated my 2nd gen apple tv and after completing the downloading and installing the software I got an itunes picture that means i have to connect it to iTunes,, can i skip this ? coz i don't have the mini usb cable

No, if you have that picture it means the update went wrong and you need to restore via iTunes.
AC

I updated my 2nd gen apple tv and after completing the downloading and installing the software I got an itunes picture that means i have to connect it to iTunes,, can i skip completing the downloading and instais ? because i don't have the mini usb cable

I updated my 2nd gen apple tv and after completing the downloading and installing the software I got an itunes picture that means i have to connect it to iTunes,, can i skip this ? because i don't have the mini usb cable

No, if you have that picture it means the update went wrong and you need to restore via iTunes.
AC

After completing the OS X Mavericks everything runs slow

After completing the OS X Mavericks everything runs slow. Programs, menus and files. When I click on them it is like they hesitate to open. Programs are slow at opening and working with them.

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How to execute closing cockpit after completed the configuration?

Hi Expert,
Please help, how to execute closing cockpit after completed the configuration? or if who have a document it will be helpful.
Best regards,

components of closing cockpit
Organizational Hierarchies (Company Codes, Controlling Area, Operating Concern, etc)
Task List template (Preconfigured templates available)
Task Lists: Derived from template and extremely crucial for successful definition of the month-end close.
Dependencies between the tasks
Monitor
Detailed information
5 steps for setting-up Closing Cockpit
Conduct Planning and Research
Create the basic template data
Build the closing template hierarchy structure
Configure individual tasks
Change the template to an executable task list
For delivering the Closing Cockpit successfully, you need to have a clear understanding of the current closing routines, the required tasks, who is responsible for each task, which tasks when executed should affect which level of the organization, and finally a clear process for review and documentation.

Problem completing job application as browser will not move me into the part of the 7th of 9 parts of the assessment questions needed to complete the job applicaion

I successfully completed 6 of the 9 parts of the job application. the 7th part is the assessment where i click on assessment and it is to put me into the 35 minute test required before completing steps 8 and 9 of the application. It says your browser will not allow you to go to this next step. Get help. so, Help or I lose all the data of my lengthy application which I have completed up to that point.

Hi adz3421,
Welcome and thanks for posting!
Sorry for the time it's taking to get service transferred for your Grandfather. I'm happy to help you from here. Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
Cheers,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

USER_SCHEDULER_JOBS has LAST_START_DATE as null even after running the jobs

Hi,
I have tried creating and running multiple Jobs using following statements, Jobs are executing the given procedure but USER_SCHEDULER_JOBS's last_start_date is null.
//creation of job
DBMS_SCHEDULER.CREATE_JOB (job_name => 'demo'||i,job_type => 'STORED_PROCEDURE',number_of_arguments => 2,job_action => 'POPULATE_DATA');
//running the job using these commands..
dbms_scheduler.set_job_argument_value(PROCESS_NAME,1,''||START_RANGE);
dbms_scheduler.set_job_argument_value(PROCESS_NAME,2,''||END_RANGE);
dbms_scheduler.set_job_argument_value(PROCESS_NAME,3,''||PROCESS_NAME);
DBMS_SCHEDULER.RUN_JOB(PROCESS_NAME);
I am able to see data getting getting populated by each job, but USER_SCHEDULER_JOBS has last_start_date value as null.
Any help will be highly appreciated.
Thanks,
Vaseem Saeed.

hi read this link, there is some explaination about start_date null:
http://docs.oracle.com/cd/E11882_01/appdev.112/e16760/d_sched.htm

How to start a new job after a finished job?

Hello,everyone,
I hava 8 background jobs, the jobs must submit in orders. This means that if I want to submit job2 ,I have to wait job1 finished, and if I want to start job3, the job2 must finished......and so on....
I only know that submit one job in background, can you help formulate the job start in order automated in ABAP program.Can you give me demo?
Best wishes!
Thinks a lot.

Hi Darren,
You can create and monitor background jobs by choosing the menu path System - Services - Jobs.
You can use:
JOB_OPEN: For opening a job in the background
JOB_SUBMIT: For submitting the job -> Here you can put the several jobs in the order you want them to execute.
JOB_CLOSE: For closing the job.
Scheduling background job by triggering an event. When job 1 is completed, an event is raised and the job 2 starts, and so on.
Refer to the link below to do this:
Scheduling background job by triggering an event - ABAP Development - SCN Wiki
You can also use the parameters PREDJOB_CHECKSTAT in the function JOB_CLOSE
PREDJOB_CHECKSTAT makes a job(job 2) start only if the previous one(job1) ends without error.
Regards,
Ashvin

Where can I check the amount after completing the MIGO

I have done Migo and received the goods in my plant.
Does this refect in the accounts automatically, Where can I go and the posting in the accounts.
Do I need to do any setup to post this amount .
Appreciate if you can provide with all the steps.
Thanks.

HI,
After Completion of MIGO, if u can go to MB03 to display this material Document
or in the MIGO also....
After Posting MIGO, go to Display and system will propose u last material Document number.
if u have not remember ur material Document number, go to me23n to display PO.
in Item overview, there will be a Tab called Purchase order history will appear. From here also u can click on Material Document number.
after that go Doc Info Tab, click on Vender Tab, now click on FI document, here u can see ur FI entries.
All entries are Hit due to Automatic acct determintaion.
Now after MIGO, go to MIRO to post Invoice and post Invoice
REgards,
Pardeep malik

Cancelling WIP Job after completing the job

Similar Messages

Maybe you are looking for