Cannot access media device through USB.

Hello I have recently upgraded to windows 7 and have had to set up Windows XP mode to work with some of our older software. Everything has gone great on the set up and the program works fine however I have a device which I use to record geographical data
that then needs to be imported directly into the software running on my VM.
I can connect the ACU via USB and the Windows 7 computer picks it up as a media device. I have then been unable to share this over to the XP VM I think it may be because it is not acting like a true USB drive. The device is old and uses Microsoft Active Sync
to share the data I have installed Activesync on the VM  but it just will not find the device.
I was wondering if anyone has had problems with this kind of issue and has any insight on solving it?

I would suspect the problem might be with the Multiport adapter.
Do you ensure the USB connection is connected to the XP Mode VM via the connected device option?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

  • When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    Did you install BC drivers on the Windows side?

  • "windows cannot access specified device, path or file", adobe reader x

    hi,
    i had an older version of reader (9.something i think) that started making troubles, so i removed it (via control panel) and tried to use reader x instead. but after installing it i tried to run it and got this message titled "c:\programfiles\adobe\reader10.0\eula.exe":
    "windows cannot access specified device, path or file. you may not have the appropriate permitions to access the item".
    after clicking "ok" the program shuts.
    i downloaded this version from adobe's site and registered. i also tried to go back to version 9 but the installation itself wouldn't go.
    i'm using windows xp and downloaded reader using chrome. i deleted all previous adobe reader files from my computer prior to downloading, so it should behave as if this the first time this program was installed on it.
    how can i solve it? (i've already tried going through the whole process again and again)
    thank you for any help.

    I have found out how to solve this issue..
    Took A few days to figure it out and a lot of installs and un-installing
    Install CS6 master collection again and restart your machine- Make sure all anti-virus is disabled
    What you have to do:
    1. Press Start
    2. go under "Abode Master Collection CS6 (it should say its empty)
    3. now left click the folder "Adobe Master Collection" and open it..
    4. it will now come up with all programmes that SHOULD have worked - their thumbnails will not be visible it will look as if its corrupted.
    5. Now this is a long procedure- go on the first shortcut, lefts click and go to properties.
    6. Then select the option that says "Open File Location" it will then take you to its main folder.
    7. Left click the highlighted Programme within the main folder, then go on properties
    8. Go on the security Tab, press "continue" then you go on "Add" then type your account name, then "check name" then tick the box "full control"
    9. Then navigate to the "compatibility" Tab and select "Run this programme as an administrator (if you don't do this it will come up with another error)
    You should now have the thumbnail (picture) for the programme now
    You have to now repeat this for the rest of the programmes/shortcut's within the "Adobe Master Collection" Folder

  • HT2458 Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

    Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

    You received incorrect information from AT&T.  You can indeed access your voicemail without your iPhone.
    Call AT&T at (800) 331-0500 (assuming you're in the U.S.).  This is a 24 hour a day, 7 day a week number.  Ask them how to access your voicemail.  Normally, you would just do this by dialing your number from another phone, typing "*" once your voicemail recording starts, and entering your password.  You don't know your password, so it's probably the last four digits of your phone number or perhaps the seven - or ten-digit phone number.  Let the AT&T person tell you.

  • Upgrading to Lightroom 5.6 get message "Windows cannot access specific device path or file. You may not have the appropriate permissions to access the item" I'm running Windows 7. How do I make it work?

    Upgrading to Lightroom 5.6 get message "Windows cannot access specific device path or file. You may not have the appropriate permissions to access the item" I'm running Windows 7. How do I make it work?

    right click the installation file and click 'run as administrator'.

  • Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

    Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
    on the 32 bit machines I was able to apply this hotfix
    http://support2.microsoft.com/kb/2738898
    But it will not install on 64 bit machines. 
    Is there a hotfix for 64 bit?  If not, what is the work around?
    Thanks!
    Robert

    Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • I changed my aol password on my desktop and now cannot access my emails through my iphone.

    I changed my aol password on my desktop and now cannot access my emails through my iphone. I tried changing the password on my phone but it still says user name or password for aol is incorrect. I have also deleted the account and added back and it still saids the same thing. I would really appreciate any help on this.

    You are referring to your iTunes/app store account? You will need to sign out of your old account on your iPhone and sign in with the new one.

  • Cannot access itune store through ipad air. The message says "cannot open itune store".

    Cannot access itune store through ipad air. The message says "cannot open itune store".

    Cannot connect to iTune Store
    (a) Sign out and sign in again (Settings>iTunes and App Store>Apple ID)
    (b) Check Time Zone and set to automatic (Setting>General>Date and Time)

  • HT4061 I cannot access my device. The screen is blank however it has power. The phone will ring but since the screen is blank i canot answer.

    I cannot access my device. The screen is blank however it has power. The phone will ring but since the screen is blank I cannot answer. It seems to be dead but has power?

    When restoring to factory defaults/new iPod fails to resolve a problem that indicates a hardware problem an an appointent at the Genus Bar of an Apple store is in order.
    Check your warranty coverage here:
    Apple - Support - Check Your Service and Support Coverage

  • Cannot access itunes radio through autoconfig proxy

    I've moved to a new office, and the new office uses autoconfig proxy. The autoconfig proxy needs authentication. Since moving to this new office, I cannot access the itunes radio. I've tried going to one of the radio website radioio and tried listening directly from there. But also no success. I clicked on the links on the website and windows media player popped up, but it seems that it also cannot get through the proxy. In addition to proxy, it seems there is also a filter installed at the new office.
    Anyone knows how I can listen to the itunes radio again at this new office?

    You'll have to talk with the IT people and see if they have blocked the ports.

  • Windows Cannot Access Specific Device, Path or File While Using Adobe Reader XI, Version 11.0.06

    Hello,
    Recently, I have been experiencing a minor problem with the Adobe Reader XI Program loaded on my computer.  When clicking the data fields on PDF versions of various forms to enter numerical or text information, a dialogue box with a small white X in a red circle on the left side of the title bar pops open and is titled:
    C:\Program Files\Common Files\microsoft shared\ink\TabTip.exe
    There is another white X in a red circle symbol displayed in the message field of the dialogue box along with the following message:
    Windows cannot access the specific device, path, or file.  You may not have the appropriate permissions to access the item.
    There is also an “OK” Button displayed on the right side of the lower margin of the dialogue box.
    Although the dialogue box is repeatedly displayed whenever I click on a data field, the program still allows me to enter and save the numerical and text information that is entered in each data field.
    My computer is a Hewlett-Packard Envy 23-d034 TouchSmart All-In-One Desktop Personal Computer with a Windows 8.1 Operating System that has all applicable Important and Recommended Windows Updates installed.  The Adobe Reader XI Program is the latest version, Version 11.0.06, and I have confirmed that there are no updates for the program at this time.
    Could you suggest any recommended actions to correct this problem with the Adobe Reader XI Program?

    unfortunately no. i have a problem in my computer that doesn't let me do that.
    this is  th entire message though and it appears on the background of the program trying to load. all you can see is the frame of Rreader, and immediatly after that it shuts down

  • ASA Cannot access https device via Clientless VPN bookmark, site to site works fine

    We've got two offices connected via an IPSEC tunnel.  This site to site VPN works great, we can access our remote devices fine from a PC on either LAN at each office.  The device's address is https://192.168.210.2
    However, if we make a bookmark on the Clientless VPN for that same address the conneciton just times out if it has to go over the site to site VPN. 
    We plugged the exact same web enabled device on the local side of the VPN, put in a bookmark for its https address and it works fine.  Its just remote bookmarks for devices on the other side of the tunnel do not work.
    Looking at the debug log I see the request going out from the source to the destination on port 443 but nothing more.  The NAT exemption etc are all right because people on the LAN have no problem accessing this device remotely with their browser. 
    I haven't been able to adequately describe this problem to find a matching Cisco example, anyone know how to fix this?

    hi luis,
    thank you for your reply. we've checked the smoothwall configuration, but couldn't discover anything which could cause this problem. we even tried replacing the sa520 with a draytek vigor router to set up an lan-to-lan vpn with the smoothwall. with the draytek in place we have no problems accessing the aforementioned servers, so it seems the issue is with the SA520.
    what exactly do you mean by creating an ACL from the remote WAN to our LAN? i assumed you meant creating a firewall rule, allowing traffic from the remote device's public ip to our LAN. however, in that case i need to enter an ip address of a device in our LAN, or else i cannot save this rule. as a test i entered the ip address of my machine as the destination address, but am still unable to access the aforementioned servers.
    here's how i set up the rule:
    from zone: UNSECURE (WAN/optional WAN)
    to zone: LAN
    service: ANY
    action: ALLOW always
    schedule: (not set)
    source hosts: Single address
    from: public ip of one of the aforementioned servers
    source NAT settings > external IP address: WAN interface address (cannot change this setting)
    source NAT settings >WAN interface: dedicated WAN (cannot change this setting)
    destination NAT settings > internal ip address: 192.168.11.123 (ip address of my machine)
    enable port forwarding: unchecked
    translate port number: empty
    external IP address: dedicated WAN

  • Windows cannot access specific device

    When I try to left click on either of my dvd rom drives in my admin account I get the following message, "windows cannot access the specific device, path,  or file. You may not have the appropriate permission to access them ". I can however right click on the device icon select open and access the file. If I sIgn in as a guest I can left click on the device and open it. Roxiuo and Zune soft can also access the drives with no problems. If i run msconfig and select diagnostic startup and log on to my account left clicking works ok. I have run Super Anti Spyware, Malaware Bytes, Advanced System Care, Io bit security, and Windows Defender and still have the same problem. The problem appaers to de in my admin account  Please help pdp8pete .

    right click the installation file and click 'run as administrator'.

  • Interfacing of RS232 serial devices through USB ports within LabVIEW 6.1 and Windows 2000 Pro?

    I have a data acqusition requirement of using 5 RS232 devices, but the motherboard i use only has two serial ports. However, it does have 4 USB ports. Does anyone know if it is possible to use these USB ports to input data from an RS232 device through a serial to USB converter?
    Does LabVIEW 6.1 support this under Windows 2000 Pro?
    Thanks in advance,
    Fraser

    Hi Fraser,
    I just moved an app to a new laptop and had to use a USB to serial comm adapter. At first try the app did not find the comm port.
    After sleeping on it, we downlaoded the most up-to-date driver for the device and upgraded VISA to the latest and gretest version.
    Everything worked fine after that.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • I cannot access my apps through wifi or data usage.After tapping the screen it will start to load then stops.

    I cannot access my apps (candy crush or fb) through wifi or data useage. It will start to load then returns back to the home screen.

    Answered in your other thread - you only need to post once.

Maybe you are looking for