Cannot Access My AP1200 Anymore????

Hi,
I have configured my AP1200 fine and it was working great. Today, I am trying to set up some more stuff but cannot access it through web.
Switch port shows me a lot of errors and collisions. I do not know what excatily is happening here, why those errors/collisions ?
Can some help me to explain that How can I know get in to my AP1200 or do I need to do all the settings again..
Pls help....
Thanks

Your best bet is to connect via the console port.
Switch port shows me a lot of errors and collisions. I do not know what excatily is happening here, why those errors/collisions ?
Look for a speed or duplex mismatch between the swtich port and AP I would set both the switch and the AP to 10Mb half duplex. If you still see these errors then try an new cable and then another port on the switch to see if the errors follow ??

Similar Messages

  • Since the update to iOS 7.0.2 I have only access to my email when there is a new massage. As as massages have been read my name turns light gray and I cannot access my email anymore.

    Since the update to iOS 7.0.2 I have only access to my email when there is a new massage. As as massages have been read my name turns light gray and I cannot access my email anymore. I have 2 other email addresses and they work properly.

    I am in the same predicament...any resolve?  Other than possibly taking it into the shop?

  • Cannot access my emails anymore from my iphone 4s.

    Cannot access my emails anymore from my iphone 4s.  Shut down phone and even rebooted to no avail.  Went into settings and deleted the account but it came right back.  Help.

    Contact the email provider.

  • Cannot access web page anymore

    I can no longer access my banks web page anymore.  I was able to get to the page and sign in up to a few days ago.
    When I try to get to the page I get a message that says "Safari can’t open the page “https://www.essabank.com/index.cfm?” because the server where this page is located isn’t responding."
    I never had this issue before.
    I have Firefox and it does not work on that browser either.
    I have also tried RockMelt and Opera, again without any luck.
    I have searched on the web on several forums and the advice I saw there for similar issues did not work.
    I called my bank and they were not having any problems and told me the problem was on my end.
    I called Verizon and they tried to help, even took over the computer and they could not get the page to come up.
    I can access the page if I use Kproxy, but, I cannot access the bill pay feature that has a totally different error message.
    Does anybody know how I can fix this issue and gain access to my bank's page as I did before.
    This is extremely important as I need to get to the page and to my bill pay feature without any issues.
    As I said, this had been working fine up to about 2 or 3 days ago.
    I am using Safari Version 5.0.5 (6533.21.1)
    When I go to my bookmarks and previews, the preview for my bank is blank or black with the Safari logo and a lock on it, if this helps...
    Any help is greatly appreciated as we really need access to our banks page and features that we use all the time....
    Thank you in advance for any help with this problem.....

    Greetings,
    As you've tried multiple web browsers, try creating a new user account, log out of your current account, log in to the new account and try from the new user to see what happens: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
    Cheers.

  • Cannot access shared folders anymore....

    Hi,
    We have a naughty problem at the office for accessing shared folders .
    We use G5 Xserve + Xraid serving home access to 12 macs.
    Our problem started when we updated all machines to 10.5.2 (nor did we have a problem with 10.5.1 or with 10.5.0).
    All machines login correctly, fetch their folders with their home accesses located in the Xserve, as allways did, BUT :
    ·Almost all the machines running Leopard (except two) CANNOT access shared items. They get Error -5002
    ·The old machines running Tiger (G3 Imac's) acess shared items without problem.
    So after many weeks doing multiple tests, we got the following conclusions:
    ·Problem is not server related.
    ·Problem si related to Leopard clients , although not in all
    ·Problem is not related to the machine, but with the account (accounts that can access shared items do it on any machine, and accounts that can't, don't do it on any machine)
    ·It seems that the trouble is related somewhat with Kerberos authentication, but it's not related to tickets (renewing them is no use)
    ·If we create new account with new name, it can access shared items
    ·If we create new account with same name that of the faulty one (renaming the later), it CANNOT access shared items.
    We have got a problem in the office, and no clue of solving it.... Have read all over apple discussions over the internet, and although some people have similar issues, they are not as close as ours....
    And none of the solutions proposed have solved the problem.
    Any ideas would be greatly appreciated, cause we are starting to get desperate
    Thanks everyone.

    new update:
    we are able to connect to remote shared folders with a different remote server (dual G4) from every machine
    machines who can connect to local server are INTELs, the one who can't are PPCs
    makes any sense to anyone?¿

  • Cannot access mac share anymore!!!

    Why was I always able to click my share from my pc, enter my passwrod and get in, now NOTHING works! My password, nothing. What the ****? Can anything ever work corectly? I have not changed a thing and all of the sudden I cannot get in. Thanks for the 2k computer that cannot allow me access from another computer,,,money well spent

    Also it says secifically, use this name to access this compuer from another, it DOESN:T accept it. This is brutal, brutal. I have never had so many problems with a computer in my life. PLease explain how Ihave sharing enabled, was always able to access my hdd, now I cannot and I have changed NOTHING

  • Cannot access Welcome page anymore

    Posted: Apr 19, 2007 8:12 AM
    Click to reply to this topic Reply email Email
    I am trying to access our site and I am getting the following. We were able to access it about 6 weeks ago.
    It seems like eveything is in order but the iTuens U page for our domain does not load at all.
    iTunes U Access Debugging
    Received
    Destination cdnet.cod.edu
    Identity "Administrator" () []
    Credentials Administrator@urn:mace:itunesu.com:sites:cdnet.cod.edu
    Time 1176990393
    Signature 4d0cddabd4b91f6d6c460f3a73866958d49086910f455d8230d0bbaae560f1c6
    Analysis
    The destination string is valid and the corresponding destination item was found.
    The identity string is valid and provides the following information:
    Display Name Administrator
    Email Address None
    Username None
    User Identifier None
    The credential string is valid and contains the following recognized credential:
    Administrator@urn:mace:itunesu.com:sites:cdnet.cod.edu
    The time string is valid and corresponds to 2007-04-19 13:46:33Z.
    The signature string is valid.
    Access
    Because the received signature and time were valid, the received identity and credentials were accepted by iTunes U.
    In addition, the following 2 credentials were automatically added by iTunes U:
    All@urn:mace:itunesu.com:sites:cdnet.cod.edu
    Authenticated@urn:mace:itunesu.com:sites:cdnet.cod.edu
    With these credentials, you have browsing, downloading, uploading, and editing access to the requested destination.

    It sounds like you have debugging turned on. This causes the debug page to load. Check and make sure the code you have has the debug URL turned off.

  • I cannot access my videos anymore in Iphoto. ' A necessary data reference could not be resolved '

    Hi, I can no longer access the videos in my iphoto library. It still shows the screenshot and the duration of the video, but when i open, i get the following message ' A necessary data reference could not be resolved'. What can i do ?
    Tried also to export, but to no avail.
    Thx for suggestions,
    Oscar

    With the amount of information you've provided it's impossible to offer a solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    Did you apply any updates or upgrades to iPhoto or the system between the time you last were able to view the video files and now?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?

  • I cannot access my mail anymore using Firefox. I have to use IE. I hate IE!!

    All of a sudden, I can not access my Comcast Email (Smart Zone) using my Firefox. Now, I have to use IE to open my mail. I hate IE!! If you want tracking cookies, that is where you go, plus it is slower than Obama's promises. I can surf using my Firefox but I have to go to IE to check my e mail which is a pain in the you know what.

    Hello there.
    Have you tried deleting your emails cookies (see [https://support.mozilla.com/en-US/kb/Deleting+cookies this] for help) and [http://support.mozilla.com/en-US/kb/How+to+clear+the+cache clearing your cache]? That will probably help.

  • Ise 1.2, cannot access guest portal

    I upgraded from 1.1.4 patch 3 to 1.2 but cannot access guest portal anymore nor with FQDN:8443 nor with IP:8443
    any idea?

    I had attached the steps to configure the guest portal and hope will address the problem.
    Configuring the Guest Portal
    Adding a New Guest Portal You must configure settings for the Guest portal before allowing guests to use it to access the network. Some settings apply globally to all Guest portals and other require you to set them for each portal individually.
    You can add a new Guest portal or edit an existing one.
    Step 1Choose Administration > Web Portal Management > Settings > Guest > Multi-Portal Configurations.
    Step 2Click Add.
    Step 3Update the fields on each of these tabs:
    •General—enter a portal name and description and choose a portal type.
    •Operations—enable the customizations for the specific portal
    •Customization—choose a language template for displaying the Guest portal with localized content
    •File Uploads—displays only if you have chosen a portal type requiring you to upload custom HTML files.
    •File Mapping— identify and choose the HTML files uploaded for the particular guest pages. Displays only if you have chosen a portal type requiring you to upload custom HTML files.
    •Authentication—indicate how users should be authenticated during guest login.
    Step 4Click Submit.
    Specifying Ports and Ethernet Interfaces for End-User Portals
    You can specify the port used for each web portal allowing you to use different ports for the end-user portals: Sponsor, Guest (and Client Provisioning), My Devices, and Blacklist portals. The Client Provisioning portal uses ports 8905 and 8909 for posture assessments and remediation, which you cannot change. Otherwise, it uses the same ports assigned to the Guest portal.
    You can also partition portal traffic to specific Gigabit Ethernet interfaces. For example, you might not want the Admin portal (which always uses GigabitEthernet 0) available on the same network as guest users or employee devices.
    Step 1Choose Administration > Web Portal Management > Settings > General > Ports.
    Step 2Enter the port value in the HTTPS Port field for each portal. By default, the Sponsor, Guest, My Devices portals use 8443, and the Blacklist portal uses port 8444.
    Step 3Check the Gigabit Ethernet interfaces you want to enable for each portal.
    Step 4Click Save.
    If you have changed the port settings, all nodes (Administration, Policy Services, and Monitoring) restart automatically, which may take several hours to complete.
    Tips for Assigning Ports and Ethernet Interfaces
    •All port assignments must be between 8000-8999. This port range restriction is new in Cisco ISE 1.2. If you upgraded with port values outside this range, they are honored until you make any change to this page. If you make any change to this page, you must update the port setting to comply with this restriction.
    •You must assign the Blacklist portal to use a different port than the other end-user portals.
    •Any portals assigned to the same HTTPS port also use the same Ethernet interfaces. For example, if you assign both the Sponsor and My Devices portals to port 8443, and you disable GigabitEthernet 0 on the Sponsor portal, that interface is also automatically disabled for the My Devices portal.
    •You must configure the Ethernet interfaces using IP addresses on different subnets. Refer to these guidelines to help you decide how best to assign ports and Ethernet interfaces to the end-user portals:
    Specifying the Fully Qualified Domain Name for Sponsor and My Devices Portals
    You can set the Sponsor and My Devices portals to use an easy-to-remember fully-qualified domain names (FQDN), such as: mydevices.companyname.com or sponsor.companyname.com. Alternatively, Cisco ISE also supports wildcard certificates to address certificate name mismatch issues. You must configure DNS to resolve to at least one policy services node. If you have more than one policy services node that will provide portal services, you should configure high availability for the portal. For example, you could use a load balancer or DNS round-robin services.
    Before You Begin
    Step 1Choose Administration > Web Portal Management > Settings > General > Ports.
    Step 2Scroll to the Portal FQDNs section, and check the appropriate setting:
    •Default Sponsor Portal FQDN
    •Default My Devices Portal FQDN
    Step 3Enter a fully qualified domain name.
    Step 4Click Save, and all nodes (Administration, Policy Services, and Monitoring) restart automatically, which may take several hours to complete.
    Step 5Configure the network DNS server so that it resolves the FQDN to the Sponsor or My Devices portal nodes. You must also update DNS to ensure the FQDN of the new URL resolves to a valid policy service node IP address. Additionally, to avoid certificate warning messages due to name mismatches, you should also include the FQDN of the customized URL in the subject alternative name (SAN) attribute of the local server certificate of the Cisco ISE policy service node.

  • VM cannot access Internet when host is connected to VPN

    Hello everyone,
    I have a little problem with my Hyper-V network. I use internal switch (external seems to have problems when I want to access the host via RDP and host has Wifi only).
    Now attached is my configuration as a wonderful picture. ;) My problem is this: I have a internal switch in Hyper-V which is used by the VMs. They can access the Internet because the host WiFi Adapter has Internet Sharing enabled. However, when I connect
    the host to the VPN, the VMs cannot access the internet anymore. I know it is not possible to share the VPN-Connection itself, but without any Internet I cannot connect the VMs to the VPN at all. So is there any way to connect the host to VPN and also the
    VMs?
    Thanks! :)
    Best,
    Chris

    Hi CBuntrock,
    Please try the following setps :
    Open network connection --> right click the vpn connection --> properties --> click tab Networking --> click the proper internet protocol version --> properties --> advanced --> tab ipsettings --> uncheck  "use defult gateway
    on remote network " --> ok
    Please try to access internet again from your VMs .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I have another computer that a virus may have taken over and I cannot log into it anymore.  I just downloaded Itunes on a new computer but most of my songs are not on there.  Is there a way to still access or find those songs?  Remotely or another way?  I

    I have another computer that a virus may have taken over and I cannot log into it anymore.  I just downloaded Itunes on a new computer but most of my songs are not on there.  Is there a way to still access or find those songs?  Remotely or another way?  Or do I need to take it to a tech to get my files off of my hard drive?

    Edit > Preferences > Store check Music under Automatic Downloads.
    Open the iTunes Store from left hand column, then select Purchasedfrom the column on the right, click the Not In My Library button and select the tunes you want to download again.
    That said, you seem to be under a misapprehension as to how iTunes works, or at least how it has worked in the past. It has, until recently, been up to you take care of your purchases once they have been downloaded. You had a one-time download which you were reminded to back up. With the recent change to this policy you can at least download your store purchases again, but having a personal backup of your iTunes store purchases, stuff purchased elsewhere and files ripped from your CDs will still be preferable to gathering all the stuff together again in the event of a disaster.
    For a backup strategy see this User Tip.
    tt2

  • I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. What do I do?

    I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?

    You can't merge Apple IDs.  You also can't cancel (delete) and existing ID, you can only choose to stop using it.
    If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance.  Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

  • I cannot access facetime or messages on my Ipod touch anymore.  I have restarted, restored and it still is not working..any ideas?

    I cannot access facetime or messages on my Ipod touch anymore.  I have restarted, restored and it still is not working..any ideas?

    It asks for my apple ID and password when I try to access facetime or messages
    .  After I enter it brings me to an email to select-then verifies and brings me back to enter ID again. 

  • Not able to update any apps from new apple id.. Old id im not using anymore., cannot access the old one

    Not able to update any apps from new apple id.. Old id im not using anymore., cannot access the old one.. But during update time asking for same old password of old apple id

    If you change your Apple ID, all the apps you purchased with the previous ID will no longer updatable for you and this problem will continue. You see your old Apple ID because you are likely still using some of the apps purchased on that ID.

Maybe you are looking for