Cannot access my icons for programs

HI, When I press the menu button my icons will not open up. I have no access to my programs.

Have you tried removing the battery to reboot the device?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Got help fixing my youtube problem, now that is working. In the process of making the fix, lost my aol set up. Re installed it, but cannot access the icon. How do i get my AOL back?

Got help fixing my youtube problem, now that is working. In the process of making the fix, lost my aol set up. Re installed it, but cannot access the icon. How do i get my AOL back?

If it's an application, it should be in the Applications folder. If in doubt, double click on the hardrive icon to open it up, then press Command+F (find) and in the window that comes up for what you want to find, type in AOL and it should appear. You can either drag it to the Dock for easy access or make an alias of that, and drag that alias to the Dock. Oh, and just so's you know, this forum is for Desktop macs only. We may be able to answer your question about a MacBook Pro. Same kind of animal, but different breeds.
good luck
John b

Palm TX cannot access the icons on bottom of touchscreen

I cannot access the icons at the bottom of the touchscreen. When I try to align the screen the input screen is on and I am unable to hide it. Selection from the lower part of the screen seems to be a row lower that the intended selection. I have tried a "hard" reset with no luck. I use the device when I travel, but it is no longer useful if I cannot change the screen to landscape or lower the keyboard. The 5 way button does not seem to access the icon either.
Post relates to: Palm TX

If the device is still under warranty, contact Palm for a replacement.
Otherwise, repairs can be found at usedpdaparts.com and pdaparts.com
In the meantime, try to calibrate the screen lower than the bullseyes to compensate for the digitizer drift.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I cannot find the icon for office:mac 08 word on my doc, where did it go?

I cannot find the icon for Office: mac 08 word on my doc. I downloaded the whole Office: mac 2008 Home & Student Edition about a year ago and just recently the word icon disappeared. The other Office icons are still visible and i am able to use them but i cannot find the word application anywhere.

Have you used spotlight search? Typed "word" and the application doesn't appear? If it doesn't then it probably isn't around anymore.... so hit command + space ... and type "word"... what happens?

HT1551 How can I view youtube directly on appletv. I cannot find an icon for it

How can I view YouTube directly on appletv, I cannot find an icon for it in the main menu

Open Finder Preferences, COMMAND ',' (comma). Check the boxes for the desired items.
Ciao

Sign out of one itunes account and sign into another seperate account on same macbook. Cannot access itunes library for 2nd account

Sign out of one itunes account and sign into another seperate itunes account on same macbook. Cannot access itunes library for 2nd account. How do I do this?

iTunes account is not the same as iTunes library.
iTunes account is what you use to purchase from iTunes.
iTunes library is what is on your computer.
You can have items from multiple iTunes accounts in one iTunes library.

BIB-7000 Cannot access X Server : For only Graphical Dashboard

Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.

oracle0282 wrote:
Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.What is the navigation path?
Please also see these docs.
11.5.9/11.5.10: Account Manager Dashboard Error: "You Have Encountered An Unexpected Error" with Exception Error: "Java.Lang.RuntimeException: BIB-7000 Cannot Access X Server" [ID 390519.1]
'BIB-7000 Cannot access X Server' Error Clicking on Details Button in Compensation Workbench Approvals Task [ID 558420.1]
Opening Reporting Page (Tab) Results In Java Exception Error: BIB-7000 Cannot Access X Server [ID 337899.1]
BIB-7000 Server Error On Navigating To Oracle Marketing Audience Workbench [ID 433209.1]
How to Test X-Server in JSP Module [ID 461497.1]
Clicking Configure icon in DBI gives You have encountered an unexpected error. Please contact the System Administrator for assistance [ID 303422.1]
Troubleshooting FNDREPRINT Framework in 11.5.10 [ID 330351.1]
ATTEMPING TO VIEW GRAPHICS OR TRYING TO CONFIGURE THE JAVA MAILER HANGS [ID 351839.1]
Thanks,
Hussein

Cannot access itunes, asks for Safari upgrade

As of today I cannot access the itunes store! It says I need version 4 or later for safari.
My Macbook was upgraded to Leopard with a work licence years ago. When I checked the software version of this mac it says 10.5.
Safari is 3.0.4.
I downloaded the leopard update for Safari, but cannot use it. It says this
"You cannot install Safari on this volume. This update requires Mac OS X 10.5.8 or newer."
This is leopard isnt it?
I always have problems installing updates, don't know why, but never bothered me as didnt stop me from doing anything until now.
Any ideas how to fix this?

Aromagician wrote:
How do i check what version 0f 10.5 I am on.
click on the  menu at the left side of your menu bar and choose +about this Mac+
When I click on the software it just says 10.5. Perhaps this version needs to be updated to a lesser version first?
no, the combo updater will update any version of 10.5.x to 10.5.8.
when was the last time you repaired permissions ? did you do any maintenance at all ?
i suggest you run disk utility (in your applications > utilities folder) and click on +repair permissions+. does it report anything out of the ordinary ?
if disk utility reports that it +finished successfully+ or so, restart your Mac and re-download the combo updater. double-click on the .dmg file to mount the disk image and run the installer. your Mac will re-boot after the install is done. run another +repair permissions+ using disk utility.
also, you might want to download and install OnyX, which is +a multifunction utility for Mac OS X. it allows you to verify the Startup Disk and the structure of its System files, to run miscellaneous tasks of system maintenance.+ let OnyX run the maintenance scripts once a month.
you can get the Leopard version of OnyX here.
good luck !

Cannot access "games" menu for video ipod sync

I did the upgrade to 7.7 a couple days ago. I have an iTouch and video iPod. I can no longer access my video iPod games, all I can see is the icon for applications now? How can I attach my video iPod games folder back to iTunes to sync with my video iPod? Thanks for the help!

I had the same problem with itunes 8 and need answers the folder ipod games just isn't in the prefrences at ALL!

HT3204 Cannot access the server for iTunes error

Cannot access iTunes server

After trying everything under the sun including emailing iTunes Store support, and uninstalling and reinstalling iTunes with NO success, I finally got it to work!!!
I uninstalled NetBarrier which I had recently installed and VIOLA! I can now access my Wish List and other iTunes Store items I had problems with. Hopefully, it is this simple for the rest of you.
Message was edited by: Trend53

HT4113 after IOS 7 update cannot access IPAD asking for Passcode

My Ipad is disable cannot access - need to reset passcode

Hi, Elvira299.
Thank you for using Apple Support Communities.
I understand your iPhone is disabled with an unknown passcode, the following article may help to resolve your issue:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Jason H.

Attempted to alter security settings and the result is that password no longer works. Tried CMD R but mouse inoperative and cannot access top menu for utilities

I tried to alter security settings resulting in rejection of my password. Tried booting using CMD R but non operating mouse pad means I cannot access top menu to select "utilities"

jmcg60,
which security settings did you try to alter? Do you have a USB mouse that you could use in place of your non-operating trackpad?

Cannot access report attributes for editing

I have a report/form combination. It's been working fine (both editing and running). I have made some changes to the report region definition source, successfully applied them, and they work as expected. However, I cannot (since yesterday, though it was fine before) access the report attributes. In the page definition, if I click on the 'report' to edit the report columns, I get an Internet Explorer error that the page cannot be found. Same thing if I try to access the report attributes by editing the region (the region definition and print attributes are fine, only the report attributes are inaccessible).
I thought I'd start over, just to see if that helped. I created a new report/form combination on the same table, and on this new report I still cannot access the report columns.
Has anyone seen this problem before?
thanks,
Carol

Please ignore this; the issue was needing a patch to handle a bug.

Cannot Access Shortcut Menu for Adding Input/Output in Formula Node

This is a wierd problem. I cannot access the shortcut menu in formula node. I right click the border, nothing happens. Anyone run into this before? Is there any other way to add inputs and outputs?
I am running Vision Builder AI and want to use a formula node in my calculator tool.
Solved!
Go to Solution.

As the saying goes, "when you hear hoofbeats, think horses and not zebras". Let's get a few things out of the way.
Is the VI in edit mode?
Is autotool on?
Drop a fresh FN on a New VI and try it again.
The only other way I know to add/remove inputs is scripting, let's not go there.
I have had a few issues with context menus, very few which persisted past a LV and/or computer restart, so I won't rule out a zebra just yet.

Cannot access my icons for programs

Similar Messages

Maybe you are looking for