Cannot access secondary GPU - error : [XORG] (EE) systems-logind

When I try to run
optirun xterm
it returns
Cannot access secondary GPU - error : [XORG] (EE) systems-logind: failed to get session: PID 361 does not belong to any known session.
Aborting because fallback start is disabled
I tried it as the troubleshoot section from bumblebee wiki. How can I fix it. I installed kernel 3.18.6 and nvidia driver 346.47
Last edited by aaa234 (2015-03-04 07:53:46)

Similar Messages

Cannot access secondary GPU

I have installed bumblebee and bbswitch but when I run optirun glxgears , see this error :
Cannot access secondary GPU - error: [XORG] (EE) systemd-logind: failed to get session: PID 1436 does not belong to any known session
I don't have /etc/X11/xorg.conf and i don't know what configuration from /usr/share/X11/xorg.conf.d/ works for me now .
Nvidia is always On !
[saman@saman ~]$ cat /proc/acpi/bbswitch
0000:01:00.0 ON
[saman@saman ~]$ sudo tee /proc/acpi/bbswitch <<<OFF
OFF
[saman@saman ~]$ cat /proc/acpi/bbswitch
0000:01:00.0 ON
In /etc/mkinitcpio.conf I have :
MODULES="i915 nvidia bbswitch"

I have done instructions of this post : https://bbs.archlinux.org/viewtopic.php … 0#p1326090
[saman@saman ~]$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a480d93f-e224-4077-83dd-7d794f593e0e rw quiet splash acpi_backlight=vendor rcutree.rcu_idle_gp_delay=1
[saman@saman ~]$ lsmod
Module Size Used by
ctr 12927 1
ccm 17534 1
coretemp 12820 0
fuse 87590 7
intel_rapl 17605 0
iosf_mbi 12682 1 intel_rapl
x86_pkg_temp_thermal 12951 0
uvcvideo 84822 0
videobuf2_vmalloc 13286 1 uvcvideo
videobuf2_memops 12519 1 videobuf2_vmalloc
intel_powerclamp 17122 0
videobuf2_core 39635 1 uvcvideo
v4l2_common 12814 1 videobuf2_core
videodev 135040 3 uvcvideo,v4l2_common,videobuf2_core
media 18365 2 uvcvideo,videodev
kvm_intel 143417 0
mousedev 17272 0
kvm 435299 1 kvm_intel
joydev 17063 0
crct10dif_pclmul 13394 0
crc32_pclmul 12915 0
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
aesni_intel 167997 2
aes_x86_64 16719 1 aesni_intel
lrw 12757 1 aesni_intel
arc4 12536 2
ath9k 129093 0
gf128mul 12970 1 lrw
snd_hda_codec_hdmi 49263 1
acer_wmi 17603 0
snd_hda_codec_realtek 67322 1
snd_hda_codec_generic 63161 1 snd_hda_codec_realtek
glue_helper 12649 1 aesni_intel
ath9k_common 26722 1 ath9k
ath9k_hw 428874 2 ath9k_common,ath9k
ath 26067 3 ath9k_common,ath9k,ath9k_hw
mac80211 648753 1 ath9k
tg3 164575 0
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
sparse_keymap 12818 1 acer_wmi
cfg80211 476584 4 ath,ath9k_common,ath9k,mac80211
mxm_wmi 12515 0
ablk_helper 12572 1 aesni_intel
snd_hda_intel 26387 6
cryptd 18553 3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_controller 26857 1 snd_hda_intel
ptp 17692 1 tg3
rfkill 18867 4 cfg80211,acer_wmi
snd_hda_codec 112621 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
pps_core 17225 1 ptp
libphy 32315 1 tg3
serio_raw 12849 0
pcspkr 12595 0
hwmon 12930 2 tg3,coretemp
psmouse 107442 0
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88779 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 1 snd_pcm
snd 73436 20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
mei_me 17987 0
evdev 21544 33
i2c_i801 16965 0
mac_hid 12633 0
soundcore 13031 2 snd,snd_hda_codec
mei 75468 1 mei_me
battery 17452 0
shpchp 35210 0
ac 12715 0
lpc_ich 20768 0
processor 27777 0
wmi 17339 2 acer_wmi,mxm_wmi
sch_fq_codel 17343 5
ext4 514390 1
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86379 1 ext4
hid_generic 12393 0
usbhid 48596 0
hid 110513 2 hid_generic,usbhid
sr_mod 21903 0
cdrom 47479 1 sr_mod
sd_mod 43575 4
ahci 33248 3
sdhci_pci 22172 0
libahci 27215 1 ahci
sdhci 39102 1 sdhci_pci
ehci_pci 12512 0
ehci_hcd 69979 1 ehci_pci
xhci_pci 12675 0
xhci_hcd 152471 1 xhci_pci
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
libata 181461 2 ahci,libahci
led_class 12855 3 ath9k,sdhci,acer_wmi
scsi_mod 147395 3 libata,sd_mod,sr_mod
usbcore 199382 6 uvcvideo,ehci_hcd,ehci_pci,usbhid,xhci_hcd,xhci_pci
mmc_core 110613 2 sdhci,sdhci_pci
usb_common 12561 1 usbcore
i8042 18002 2 acer_wmi,libps2
serio 18282 6 serio_raw,atkbd,i8042,psmouse
bbswitch 12878 0
nvidia_uvm 66649 0
nvidia 8344432 2 nvidia_uvm
i915 1002518 8
button 12953 1 i915
intel_gtt 17848 1 i915
i2c_algo_bit 12744 1 i915
video 22205 2 i915,acer_wmi
drm_kms_helper 98881 1 i915
drm 273079 12 i915,drm_kms_helper,nvidia
i2c_core 50240 8 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,v4l2_common,videodev
nvidia is in use but doesn't work !
[saman@saman ~]$ modprobe -r nvidia
modprobe: FATAL: Module nvidia is in use.

Hybrid graphics -- cannot access second GPU [SOLVED]

I have latest Arch on my desktop, with Intel 4770k including an integrated graphics. Recently I installed a Geforce GTX 750 Ti into the desktop and want to use this hybrid GPU system. Problem is after I installed nouveau + bumblebee + bbswitch, the system cannot access the second (nVidia) GPU:
optirun -vv glxgears
and the output is:
[ 41.936801] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 41.937150] [DEBUG]optirun version 3.2.1 starting...
[ 41.937160] [DEBUG]Active configuration:
[ 41.937162] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 41.937165] [DEBUG] X display: :8
[ 41.937167] [DEBUG] LD_LIBRARY_PATH:
[ 41.937169] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 41.937171] [DEBUG] Accel/display bridge: auto
[ 41.937173] [DEBUG] VGL Compression: proxy
[ 41.937175] [DEBUG] VGLrun extra options:
[ 41.937177] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 41.937216] [DEBUG]Using auto-detected bridge virtualgl
[ 41.950748] [INFO]Response: No - error: [XORG] (EE) systemd-logind: failed to get session: PID 924 does not belong to any known session
[ 41.950767] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) systemd-logind: failed to get session: PID 924 does not belong to any known session
[ 41.950769] [DEBUG]Socket closed.
[ 41.950777] [ERROR]Aborting because fallback start is disabled.
[ 41.950789] [DEBUG]Killing all remaining processes.
I looked through several posts, but still do not quite understand how to solve this problem. Besides, there is no
/proc/acpi/bbswitch
file in my directory. I am sure I have installed bbswitch already.
Thanks very much.
Last edited by nullwax (2014-08-22 15:34:22)

ArchAddict wrote:I am using a GT 770M and it works just fine for me. Instead of using nouveau have you tried only xf86-video-intel, nvidia, and bumblebee? Using optirun with these packages and it works for me like a charm.
Thanks, ArchAddict. I remove nouveau things and install nvidia. Seems it works now. Quite strange, since previously there is a conflict when install official package nvidia.
However, there is another thing right now:
optirun -vv glxgears
and the last part of the output becomes:
[ 269.013157] [INFO]Response: Yes. X is active.
[ 269.013176] [INFO]Running application using virtualgl.
[ 269.013265] [DEBUG]Process vglrun started, PID 1292.
/usr/bin/vglrun: line 241: exec: glxgears: not found
[ 269.018514] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 269.018532] [DEBUG]Socket closed.
I am not quite familiar with graphics card things, and what does it mean by glxgears: not found? Thanks a lot.

SRKIM: Bis dashboard 에서 BIB-7000 Cannot Access X Server Error

PURPOSE
Bis dashboard page 에서 발생하는 BIB-7000 Cannot Access X Server error 를 해결한다.
Problem Description
Graph를 보여 주는 BIS dashboard page 에 접근 시 아래와 같은 error 가 발생한다.
Error
You have encountered an unexpected error. Please contact the System Administrator for assistance.
Click here for exception details.
On clicking the link, exception stack would be displayed where
“java.lang.RuntimeException: BIB-7000 Cannot access X Server" is displayed
Workaround
N/A
Solution Description
1. Applications 와 Database tier 의 context file 에서 "s_display" 변수가 제대로 설정 되었는지 확인 한다.
Nav : Application (OAM) > AutoConfig > Edit Parameters
"s_display" 변수는 반드시 아래와 같은 형식으로 설정 되어 있어야 하며 해당 Display Server 가 반드시 running 상태 여야 한다.
"DISPLAY <hostname or ip address>:0.0"
2. 'root' user 로 Display Server에 접속 하여 DISPLAY 환경 변수를 아래와 같이 설정한다.
For csh:
% setenv DISPLAY <hostname or ip address>:0.0
example: setenv DISPLAY 192.168.1.128:0.0
For sh, ksh and bash:
$ DISPLAY=<hostname or ip address>:0.0; export DISPLAY
example: DISPLAY=192.168.1.128:0.0; export DISPLAY
3. adstpall.sh script 을 이용하여 application services 를 다시 시작한다.
Reference Documents
Note. 390519.1 Java.Lang.Runtimeexception: BIB-7000 Cannot Access X Server

oracle0282 wrote:
Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.What is the navigation path?
Please also see these docs.
11.5.9/11.5.10: Account Manager Dashboard Error: "You Have Encountered An Unexpected Error" with Exception Error: "Java.Lang.RuntimeException: BIB-7000 Cannot Access X Server" [ID 390519.1]
'BIB-7000 Cannot access X Server' Error Clicking on Details Button in Compensation Workbench Approvals Task [ID 558420.1]
Opening Reporting Page (Tab) Results In Java Exception Error: BIB-7000 Cannot Access X Server [ID 337899.1]
BIB-7000 Server Error On Navigating To Oracle Marketing Audience Workbench [ID 433209.1]
How to Test X-Server in JSP Module [ID 461497.1]
Clicking Configure icon in DBI gives You have encountered an unexpected error. Please contact the System Administrator for assistance [ID 303422.1]
Troubleshooting FNDREPRINT Framework in 11.5.10 [ID 330351.1]
ATTEMPING TO VIEW GRAPHICS OR TRYING TO CONFIGURE THE JAVA MAILER HANGS [ID 351839.1]
Thanks,
Hussein

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Cannot access music store - error message 404

ok- i guess i'm looking for an explanation more than a solution. while trying to download a song (as usual) this morning i received an error message for the first time ever. "cannot access music store. please try again later. 404" ... for 2 hours i searched the net for a solution, checked my firewall, even joined this forum. right before posting this message again, i tried to download the song so i'd be able to explain the error message in this posting. but itunes decided to work.
my question-- does itunes sometimes time out because of heavy traffic? will this problem lessen if i upgrade to a newer version? (btw- how do i do that? i checked off "dont remind me again" when the pesky reminder would pop up... now i want to upgrade.)

Hi - I have the same problem. With the additional wrinkle that I can't close iTunes when it can't connect to the Music store. I have to use Task Manager to kill it. I am totally fed up with Apple for their lack of support on this. However, I have had one thought though: I notice that iTunes registers itself with Windows Firewall as an exceptional program that is allowed to receive incoming network connections. I don't object to that - but the thing is I am using a network modem which has its own built-in firewall. If iTunes has to be able to receive incoming network connections, don't I have to configure the network modem's firewall to treat it as an exception too? I have just done a search for "iTunes Firewall" in Google and it came up with loads of promising looking stuff. I will investigate further.

Cannot Access External Data Error

Hello all,
Please suggest me on Cross domain policy error 2170. I followed the below steps:
Step 1: Copied cross domain file in Tomcat Root and then checked whether its working or not and it got worked in a browser.
Step 2: Restarted Tomcat Server
Step 3: Then opened Macromedia.com and clicked on Global Flash player settings and here i got stuck what are the URLS to be added.
Are the above steps are correct or not?
Thanks
Chanukya

You could go through the following SAP note:
1751710 - Cannot access external data when viewing the Dashboards in InfoView or BI LaunchPad through VPN
Symptom:
When viewing the Dashboards through InfoView or BI LaunchPad, below error occurs:
Environment:
Dashboards Design 4.0
Xcelsius 2008
BusinessObjects Enterprise Xi 3.1
BI Platform 4.0
Reproducing the Issue:
Create a Dashboards based on Qaaws.
Publish it to InfoView or BI LaunchPad.
View the Dashboards through VPN .
Crossdomain policy error appears.
Cause:
DNS could not resolve the domain name.
Resolution:
Modify the host file entry
Go to:Start ->run-> %SystemRoot%\system32\drivers\etc\hosts
Enter the <ip address><FQDN><server name>
Hope this helps!!

Cannot access YouTube. Error message: The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete.

I accessed YouTube briefly, but as soon as I linked my YouTube account to my Google account (now required by YouTube), I got that message.

Hey, I have an easier solution. No need to wipe all of your cookies or restart firefox:
Go to Tools > Options, select the Privacy Tab, then click on the link to "remove individual cookies".
In the window that comes up, type youtube into the Search box at the top, and then remove all of the cookies that are displayed.
Now when you visit youtube.com you'll be signed out of your account, and you can sign back in without getting the redirect error.

Cannot Access XML Data : Error # 2032

Hi All,
I am getting the above error when I am passing the URL parameters ( 4 of them) to child swf which receives them and based on it , it will access 6 other XMLs.
When I use flash parameters the child swf shows the error message, while if I do it without parameters the child swf is able to access the XMLs.
Please suggest????
PS: I have uploaded all the dev files( parent and child SWF) , 6 XMLs at the same sharepoint location.
Edited by: NamitJain on Dec 21, 2011 12:12 PM

Hi,
What Flash Variable format you are using? I hope it is XML, could you please confirm it?
Regards,
Nakul Mehta

Cannot access EAC - unexpected error

Exchange server installation 2013 running since 2012. Recently replaced SSL Cert. Since then: URL
https://FQDN/ecp opens blueish Outlook Web App (as before). Type in Domain/Username and Password results in a yellowish window stating "Unexpected Error. An error occured and your request couln't be completed. Please
try again." Outlook can connect to server, just opening EAC does not work. Worked before the new SSL Cert. Any suggestions how to resolve this? Thank you.

Hi Snx1,
Thank you for your question.
Did the error occur when we logon OWA?
First of all, we make sure the URL which we type is correct without any problems. Then we could create another administrator to check if we could login ECP. We could use current user account logon ECP after we logon successfully with another account.
If new administrator account logon with same error, we could delete Window Profile, then type
https://FQDN/ecp to check if the issue persist.
If the issue persist, we could collect application log and event log and send to
[email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Cannot access firefox. Error message "your firefox profile cannot be loaded. It maybe missing or inaccessible"

This ocurred on my Dell Laptop, it seems, after several reset Firefox to Default. My Dell is an Inspriron/8600. I have removed Firefox and reloaded twice. What should Ido next.
Thanks
Bernard Crotty
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

Hi Bernard, normally, when doing a Reset, Firefox moves your old profile folder to the desktop (in a folder named Old Firefox Data), creates a new profile folder incorporating some of the data from your old profile, and updates a configuration file with the new profile folder name. It sounds as though this broke down somewhere along the way. Let's see whether it was that third step.
In order to ease the next few steps, please make sure that you can view hidden files and folders. This article has the steps:
* Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/win_fcab_show_file_extensions.mspx
* Newer Windows: http://windows.microsoft.com/en-us/windows/show-hidden-files
To open your Firefox data folder, you can type or paste the following into either the Start menu Run box, Search box, or into the address bar of a Windows Explorer/My Computer window:
%APPDATA%\Mozilla\Firefox
In the folder that loads, you should see a Profiles folder and a file named profiles.ini (it's a text file you can edit with Notepad).
Click into the Profiles folder to see whether you can find a semi-randomly-named folder. If you find it, click into it to confirm that it contains some files and isn't empty. If there is stuff there, let's work with it. Up in the address bar of Windows Explorer, select and copy the semi-random name of the folder, or you can make a note of it somewhere.
Return back up to the Firefox folder. Right-click>Edit the profiles.ini file and it should open in Notepad. You should see something like the following:
[General]
StartWithLastProfile=1
[Profile0]
Name=default
IsRelative=1
Path=Profiles/'''asdf1234.default'''
Default=1
The part of Path after Profiles/ needs to match the name of the folder you copied or noted earlier. Go ahead and fix it and save the file.
Then try to start Firefox again. Any luck?
If the existing profile (post-Reset) is missing completely, or is missing important data, we can grab one of the earlier profile folders from the Old Firefox Data folder on your desktop. For the steps to do that, please see this post: https://support.mozilla.org/questions/1025708#answer-641099

Cannot access a closed file error on adding a file to a library

I am trying to copy the attachments from a list to a document library. When I try to write into a document library, occasionally I am getting following error "The remote server returned an error: (500) Internal Server Error. Cannot access
a closed file. Cannot access a closed file. "
Any ideas on what is causing the problem. The code is specified below, The error message is specified after the code. Can you please let me know if I am missing anything. I cant find anything wrong in the code or in the library. The code is running as WCF
Service and the call to process this is made from Infopath form.
try
SPSecurity.RunWithElevatedPrivileges(delegate()
string siteURL = "Site URL";
using (SPSite site = new SPSite(siteURL))
SPWeb oWeb = site.OpenWeb();
SPList oList = oWeb.Lists["List Name"];
SPList docDestination = oWeb.Lists["Destination Library on same site"];
SPFolder fldRoot = oWeb.Folders["Destination Library on same site"];
SPFileCollection flColl = null;
SPQuery oQuery = new SPQuery();
oQuery.Query = "<Where><Eq>" + "<FieldRef Name=\"ID\"/><Value Type=\"Number\">" + RequestID + "</Value></Eq></Where>";
SPListItemCollection oItems = oList.GetItems(oQuery);
foreach (SPListItem lstItem in oItems)
if (lstItem["ID"].ToString() == RequestID)
if (lstItem.Attachments != null && lstItem.Attachments.Count > 0)
foreach (String strName in lstItem.Attachments)
flColl = fldRoot.Files;
SPListItem listtem = docDestination.Items.Add();
SPFile FileCopy = lstItem.ParentList.ParentWeb.GetFile(lstItem.Attachments.UrlPrefix + strName);
SPQuery oQueryDest = new SPQuery();
oQueryDest.Query = "<Where><Eq>" + "<FieldRef Name=\"Name\"/><Value Type=\"Text\">" + FileCopy.Name + "</Value></Eq></Where>";
SPListItemCollection collListItems = docDestination.GetItems(oQuery);
string destFile = flColl.Folder.Url + "/" + FileCopy.Name ;
if (collListItems.Count > 0)
String strFileNamePrfix = FileCopy.Name.Substring(0, FileCopy.Name.Length - 3);
strFileNamePrfix = strFileNamePrfix + "_" + collListItems.Count.ToString();
strFileNamePrfix = strFileNamePrfix + FileCopy.Name.Substring(FileCopy.Name.Length - 3,3);
destFile = flColl.Folder.Url + "/" + strFileNamePrfix;
byte[] fileData = FileCopy.OpenBinary();
Trace.WriteLine("Board Services dest file" + destFile + " Count = " + collListItems.Count.ToString());
SPFile flAdded = flColl.Add(destFile, fileData,true);
SPListItem item = flAdded.Item;
flAdded.Item.Update();
catch (Exception ex)
string strLogEntry = ex.Message.ToString() + ex.StackTrace.ToString();
finally
Form submission failed. (User: xxxxx, Form Name: Template, IP: , Request: http://Site Url/Lists/List name/Task/editifs.aspx?List=e6647e38-cb01-46b3-8bee-308357045532&ID=116&Source=http://Site URL/Lists/List Name/AllItems.aspx?View={CB9F3C2B-49DF-4D75-9720-1E7E000FD229}&FilterField1=Status&FilterValue1=Completed&IsDlg=1&Web=706d51c9-e509-40f3-884a-7d40e126ff14,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2013-12-06T16:11:54:747Z, Type: DataAdapterException, Exception Message: The remote server returned an error: (500) Internal Server Error. Cannot access a closed file. Cannot
access a closed file.
at System.IO.FileStream.Write(Byte[] array, Int32 offset, Int32 count)
The remote server returned an error: (500) Internal Server Error.)

Hi Dimitri,
Thank you, I tried increasing the timeout on web.config file of the wCF service and reloaded the config file.
<httpRuntime executionTimeout="90" maxRequestLength="20000" useFullyQualifiedRedirectUrl="false" requestLengthDiskThreshold="8192"/>
As the error
Form submission failed. (User: , Form Name: Template, IP: , Request: http://site /editifs.aspx?List=e6647e38-cb01-46b3-8bee-308357045532&ID=102&Source=http://site List/AllItems.aspx?View={cb9f3c2b-49df-4d75-9720-1e7e000fd229}&SortField=Status&SortDir=Asc&IsDlg=1&Web=706d51c9-e509-40f3-884a-7d40e126ff14#,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2013-12-06T16:11:54:747Z, Type: DataAdapterException, Exception Message: The remote server returned an error: (500) Internal Server Error. Cannot access a closed file. Cannot access
a closed file.
at System.IO.FileStream.Write(Byte[] array, Int32 offset, Int32 count)
is happening at following line
SPFile flAdded = flColl.Add(destFile, fileData,attachmentPropertiesHashTable ,true);
I only modified the timeout on the wcf service.
I dont think I need to change the timeout on the Webapplication which has this site?
Regards
Nate

Cannot access a shared folder Error code: 0x80070035

Hello Experts,
I have been working on this issue for like three days without a solution. I am truly desperate.
My company just purchased a new Cloud Server that we will use as our development environment for a software project. In order for all the developers (which are all over the US) to access the development environment, we need to have a few shared folders on
that new server.
As soon as we got the server I did the following:
1) Installed Active Directory
2) Created a directory and made it shared - yes IT IS shared.
3) I created a few new users on the new active directory domain
THE PROBLEM:
I can't access the shared directory.
Other developers have been successful in connecting to the shared folder (so the share is working) - all except me.
when I open explorer and type \\IPADDRESS\SHAREDFOLDER instead I get this error (I am not even asked for credentials)
Network Error
Windows cannot access \\IPADDRESS\SHAREDFOLDER
Error code: 0x80070035
The network path was not found.
Things I have already tried:
a) Enable NetBIOS over TCP/IP - on all adapters - still did not help
b) Disable IPv6 - I am not sure how to check if it truly disabled
c) Turned off all firewalls - did not help
d) Mapping a Drive using different credentials - I just get asked for credentials over and over
e) Ping - yes I can see the server
f) My credentials are correct because I can Remote Desktop with the credentials with no problem ( I am administrator)
My Machine:
Brand New Asus G Series
Windows 7 Home Edition
Any ideas?
Sorcerdon

In my case it was that the OU that my system was in did not have firewall rules for network file and printer sharing enabled. I enabled all of the rules for Domain policy and that fixed it.
I noticed a lot of comments about turning off the firewall not working. I can't be 100% sure, but in my experience with Server 2008 and Windows 7, if you want to configure a service that uses the network the base filter engine and the firewall HAVE to be
turned on while you configure. You can turn the firewall off after configuration, but they have to be active during configuration.
Good luck!

BIB-7000 Cannot access X Server : For only Graphical Dashboard

Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.

oracle0282 wrote:
Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.What is the navigation path?
Please also see these docs.
11.5.9/11.5.10: Account Manager Dashboard Error: "You Have Encountered An Unexpected Error" with Exception Error: "Java.Lang.RuntimeException: BIB-7000 Cannot Access X Server" [ID 390519.1]
'BIB-7000 Cannot access X Server' Error Clicking on Details Button in Compensation Workbench Approvals Task [ID 558420.1]
Opening Reporting Page (Tab) Results In Java Exception Error: BIB-7000 Cannot Access X Server [ID 337899.1]
BIB-7000 Server Error On Navigating To Oracle Marketing Audience Workbench [ID 433209.1]
How to Test X-Server in JSP Module [ID 461497.1]
Clicking Configure icon in DBI gives You have encountered an unexpected error. Please contact the System Administrator for assistance [ID 303422.1]
Troubleshooting FNDREPRINT Framework in 11.5.10 [ID 330351.1]
ATTEMPING TO VIEW GRAPHICS OR TRYING TO CONFIGURE THE JAVA MAILER HANGS [ID 351839.1]
Thanks,
Hussein

Cannot access secondary GPU - error : [XORG] (EE) systems-logind

Similar Messages

Maybe you are looking for