Cannot build because of Nuget errors

Recently my workstation was migrated from windows 7 to 8.
When I downloaded my project from TFS source control and tried to build it for deployment to my test server, I got these Nuget errors.
How do I fix this?
C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.targets (100): Unable to find version '4.0.20710.0' of package 'Microsoft.AspNet.WebApi.Core'.
C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.targets (100): Unable to find version '4.0.20710.0' of package 'Microsoft.AspNet.WebApi.WebHost'.
C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.targets (100): Unable to find version '2.0.30506.0' of package 'Microsoft.AspNet.WebPages'.
C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.targets (100): Unable to find version '2.0.20710.0' of package 'Microsoft.AspNet.WebPages.Data'.
C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.targets (100): Unable to find version '2.0.20710.0' of package 'Microsoft.AspNet.WebPages.OAuth'.
C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.targets (100): Unable to find version '2.0.20710.0' of package 'Microsoft.AspNet.WebPages.WebData'.
C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.targets (100): Unable to find version '2.0.20710.0' of package 'Microsoft.Net.Http'.
C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.targets (100): Unable to find version '5.0.8' of package 'Newtonsoft.Json'.
C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.targets (100): The command ""C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\.nuget\NuGet.exe" install "C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\SCD4\packages.config"
-source "" -NonInteractive -RequireConsent -solutionDir "C:\Builds\4\SCD4\SCD4 - Test\Sources\MVC4\SCD4\ "" exited with code 1.

Hi arame,
I am glad to hear you resolved the issue. Thanks for sharing your experience here, it is good to other members who experience the same issue in the community.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Check for used DCs failed:Cannot build because used component is broken

Hi All,
when i Build the DC after creation public part getting the below error,
Jun 30, 2008 4:06:41 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: eprtest: Build failed for chdp.com/eprtest(MyComponents) in variant "default": Cannot build because used component is broken: chdp.com/labourmanagement( MyComponents)
please help me.
Thanks,
RameshBabu.V

Hi rameshbabu,
Check for the dc chdp.com/labourmanagement , which u r using as dependency for ur dc . That dc is not built properly. Rectify the problem in chdp.com/labourmanagement & then rebuild ur dc, which is using that dc as used dc.It will work properly.
regards
Sumit

Cannot build because used component is broken

Hi,
i'm trying to add external library (com.sap.security.api.jar) into my DC using the blogs
/people/bala.krishnan2/blog/2006/09/25/bid-adieu-to-bots--using-captchas
I want to use com.sap.security.api.IUser in my porgram to get the current login id.
but i'm getting following errors whern i'm trying to build the my WD DC project after adding two public parts 'Compilation' and the other of type 'Assembly' .
Jul 5, 2009 2:24:35 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: incrprf: Build failed for sap.com/incrprf(sap.com_SAP_ESS_1) in variant "default": Check for used DCs failed: Cannot build because used component is broken: sap.com/extlib( sap.com_SAP_ESS_1)
Build log -
Development Component Build (2009-07-05 14:24:35)
Component name: incrprf
Component vendor: sap.com
SC compartment: sap.com_SAP_ESS_1
Configuration: DEV_XSSTRACK_D
Location: DEV_XSSTRACK_D
Source code location: http----
/sap.com_SAP_ESS/dev/inactive/DCs/sap.com/incrprf/_comp/
DC root folder: C:\Documents and Settings\----\.dtc\0\DCs\sap.com\incrprf\_comp\
DC type: Web Dynpro
Host: -
DC Model check:
          [dcmake] All used DCs are available locally
          [dcmake] ERROR: Check for used DCs failed: Cannot build because used component is broken: sap.com/extlib( sap.com_SAP_ESS_1)
          [dcmake] Build failed with errors.
can you please help me on this.
Thanks
Ali

Look at the build log of the broken DC using the CBS WebUI for more information.

"The operations cannot complete because of an error" DFER

I frequently use preview to view exports of images from Adobe Illustrator on my Retina MBP. Typically I export an image, then I view it in Preview. After viewing, I make changes then re-export while the file is still open in Preview. It usually works fine and when I change the focus to the preview window the view is updated to the latest export, very slick. The issue is that after a few exports over minutes or even hours I eventually get this message: "The operations cannot complete because of an error" DFER
It appears to be a file sharing issue caused by the Preview app making it so Illustrator can't overwrite the file anymore.
My question is, why does this process work fine the first few times only to stop and require me to quit Preview before I can export again?? Just closing the open Preview window doesn't fix the issue, I have to fully quit Preview to be able to export from Illustrator.
Is there a work around that will let me continue viewing the same file in Preview no matter how many times I overwrite it using Illustrator?

I have the same error TADD with illustrator CS5/Win7. Removing AIprefs or Font-cache doesn't seem to help.
in my folder C:\Program Files (x86)\Adobe\Adobe Illustrator CS5 there is a shortcut to
C:\Program Files (x86)\Adobe\Adobe Illustrator CS5\Support Files\Contents\Windows\Illustrator.exe
but I don't think i'm supposed to start moving the program around..
Has smbdy found a solution yet to this problem??

My iPod cannot sync because of unknown error -51

Before the new itune update I was able to sync my ipod successfully. Now with this update each time Im trying to sync my ipod touch, it stops and theres a simple pop up that states "Ipod cannot be synced. Unknown error occured (-51)" WHAT IS IT?? Please help.

I just this afternoon started getting error -50 when trying to sync my iphone to itunes (mac) even though it worked just 4 hours ago!

Can't get my desktop PC Win7 MS Ofc 2010 calendar, contacts, tasks onto iCloud. Get error message: Setup cannot start because of unexpected error". Laptop Win8

I have a desktop PC Win7 with MS Ofc 2010. I have iCloud on Macbook, Laptop Win 8 with MS Ofc 2013, iPhone synched. I cannot get iCloud to accept the Outlook, Calendar, Contacts, Tasks with checking the box and starting the upload.
Error Message: Setup cannot be started because of an unexpected error. Should I delete iCloud and reload and try again? What are suggestions from the community? Sent report to iCloud.

Hi Clifford,
Take a look at the article below, it provides tips that should help you resolve the iCloud setup issue.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Symptoms
After installing or upgrading to iCloud Control Panel 3.0, iCloud setup cannot complete.
Resolution
You may see one of several messages. Your troubleshooting steps will differ depending upon the message:
“Your setup couldn't start because your username or password is incorrect. Go to the iCloud Control Panel, sign out, and sign back in.”
Click Cancel to close the message.
Click "Sign out" on the iCloud Control Panel.
Reenter your Apple ID and password, then click Sign in.
“Your setup couldn't be started because the iCloud server stopped responding.”
or “Your setup couldn't be started because the iCloud server couldn't be reached.”
Check the System Status page to make sure there aren't any issues affecting the settings you've chosen in iCloud Control Panel. If you are setting up iCloud for use with Outlook, check that there aren't any issues with Mail, Contacts, Calendars, or Reminders.
Make sure your computer is online. In a browser, attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud contacts, calendars and tasks cannot be added to Outlook. If you're using Windows 8, review the instructions for resolving network problems. If you're using Windows 7, review the instructions for troubleshooting internet connection issues.
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
-Jason

Cannot build because cannot find Aspen.platform

I downloaded the iPhone SDK and installed. I tried to build one of the sample programs, but it will not build.
I get the following error. I cannot figure out what is going on.
neilford
Building target “FingerSketch” of project “FingerSketch” with configuration “Debug” — (1 error)
Checking Dependencies
error: There is no SDK with specified name or path '/Developer/Platforms/Aspen.platform/Developer/SDKs/Aspen1.2.sdk'
error: There is no SDK with specified name or path '/Developer/Platforms/Aspen.platform/Developer/SDKs/Aspen1.2.sdk'
Build failed (1 error)
Message was edited by: Neil Richmond2

I can't reproduce the problem now, but had a similar problem after switching to the newer iPhone SDK. If you enter Edit Project Settings then at the top, in the section titled Architectures, there is a listing +Base SDK+. I think in version one of the SDK this had a value of Aspen.platform, but for the newer SDK this should be changed to the more simply named "+Simulator - iPhone OS 2.0+". The code should then compile.
Hope that works, given that I can't test it.

Itunes cannot open because of unknown error (13005)

Help. Itunes will not open, but if I log onto my computer as another user, Itunes works fine.
Thanks

Some users here have reported that one cause of the Runtime error is the Apple Software Update, so you might try removing that and see if that fixes the problem. Removing the Software Update shouldn't affect iTunes itself (though as with any software maintenance operation, it would be wise to make a backup of your purchased tracks before you try it), you just won't get automatic update checking.
Hope this helps.

The operation cannot complete because an unknown error. [CANT] opening message.

Hi All!
hey i have recently this problem happening any time i launching the program . Not sure what it is_? If some can help i really appreciate .
Thanks People.

psicario84 wrote:
By the way I'm using Mac os x mavericks Not a Pc Thanks anyway for your help.
There are administrators on Mac OS as well. Please read your system's manual.

TS2834 I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps saying "Mail cannot open because of a problem" and something about not being compatible ??? Help! I miss my mail

I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Cannot build .exe because of error

The following error appears when building the exe.
Error copying files.
Source: C:\Program Files\National Instruments\LabVIEW 8.6\resource\lvanlys.dll
Destination: G:\CND\PROGRAMS\Cluster5\Hardware\CR2_RF_LABVIEW\RF_ASSY\TX_CAL\builds\RF_ASSY_CAL_X3\CR2_RF_ASSY_CAL\data\lvanlys.dll
Copy in Copy From Folder To Folder.vi->Librarian Copy.vi->AB_Destination.lvclass:Copy_File.vi->AB_Source.lvclass:Copy_SourceItem.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller<APPEND>
G:\CND\PROGRAMS\Cluster5\Hardware\CR2_RF_LABVIEW\RF_ASSY\TX_CAL\builds\RF_ASSY_CAL_X3\CR2_RF_ASSY_CAL\data\lvanlys.dll

Hi General-D,
Perhaps this will help: Error Copying Files when Building an Executable
If not, I am curious if you get this error regardless of the Destination Directory that you specify in the properties of your build specification. Try just building it to a folder on your desktop and let us know if you still see an error.
If you do, maybe you could shed some light on what exactly your application is doing. For example, the lvanlys.dll has been known to cause some issues when building it in a Real Time application, which was resolved for LabVIEW 2009 (LabVIEW 2009 Bug Fixes). If we know what you're including in your build (LabVIEW modules, drivers, .dlls, etc.) that will definitely help us narrow down the issue.
Thanks!
- Greg J
Message Edited by VTHokie on 06-11-2010 08:00 PM

Whenever I try to open an attachment I get "The download cannot be saved because an unknown error occurred"

Title says it all. If I try to "open" an attachment, the download dialogue comes up and the progress bar begins to fill, then when it should be complete I get the message:
"The download cannot be saved because an unknown error occurred
Please Try Again."
I can still save the files, but then I have to delete them (and that's just a hassle). Any help would be appreciated!

Tools, Options, Attachments, Incoming. Then set to your prefered PDF reader.
An update has reset this to the internal PDF viewer rather than sticking with the one you had before. This reader does not work on my machine.

Error: You cannot login because an error occurred while retrieving the login URL. (WW

Situation is this.. was using 8.1.6 EE and Oracle Portal.. was able to get the Oracle Portal page up and after a while the application died.. this happened numerous times. Found in one of these forums that a bug existed (UTL_HTTP) and recommended going to 8.1.7 EE because of a patch. I migrated my 8.1.6 EE to 8.1.7 EE(made sure procedures & packages were valid). I'm able to bring up the Oracle Portal page but when I go to login I get this:
Error: You cannot login because an error occurred while retrieving the login URL. (WWC-41441)
Thoughts?

Hi,
I ran ssodatan again and got the following error:
ERROR: Setting Login Server Partner App
ORA-06508: PL/SQL: could not find program unit being called
I then found out that the wwsec_sso_enabler_private in the SSO
schema is invalid and this was causing the above error. I tried
recompiling the package but got the following error:
Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
LINE/COL ERROR
151/6 PL/SQL: SQL Statement ignored
151/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
151/20 PLS-00336: non-object-table "SECI" illegal in this
context
160/4 PL/SQL: SQL Statement ignored
643/6 PL/SQL: SQL Statement ignored
643/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
643/20 PLS-00336: non-object-table "SECI" illegal in this
context
LINE/COL ERROR
651/4 PL/SQL: SQL Statement ignored
713/4 PL/SQL: SQL Statement ignored
713/50 PLS-00382: expression is of wrong type
745/3 PL/SQL: SQL Statement ignored
746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
allowed in this context
The same package in the Portal schema is valid. Will an
export of this package from a working instance and an import into
the above instance solve this problem?
Thanks and Regards,
Rupesh

The operation cannot complete because of an unkown error while exporting to png

Adobe Illustrator CS5
Windows 7 64bit
I am getting the following error while trying to export a png
"The operation cannot complete because of an unkown error. [13]"
I tried disabling all startup items, rebooting, copying and pasting to a new document to no avail.
Please help

Here is what I tried and it worked
Save the file as pdf with the "Preserve Illustrator Editing capabilities" checked. Rename the file from .pdf to .ai
New file can now export without any problems.
Wierd. But thanks to everyone who posted

Get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

Restart your computer and the iPhone. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

Cannot build because of Nuget errors

Similar Messages

Maybe you are looking for