Cannot cancel 202 movement after 201 using VLMOVE
Hi,
I have dont 201 movement using VLMOVE. I have to cancel this movement since the Cost Center was wrong.
I tried 202 movement with MB1A, but get the error as "Document is incomplete: You cannot save the delivery".
Can you tell me how I can cancel this movement which has HU involved.
Thank You
HI Benu Mathew
What error message you are getting.?
Try to cancel Material Document in MIGO or MBST.
Reb,
Bhg
Similar Messages
-
How to cancel a Move Order line using API
Hi
I have a requirement, where I have to cancel Move order lines.
At times, multiple Move order lines are getting created for the same Sales order line.
Even after the Sales Order line is shipped and closed, the move order line is still open and it also has a corresponding pending transaction in mtl_material_transactions_temp table.
I came across INV_MOVE_ORDER_PUB.process move order line API.
how do I use it to cancel the move order line. Any sample codes would be highly welcome.
ThanksFinally, found an alternate solution.
used the following code.
===================================
SET serveroutput on size 1000000
DECLARE
l_return_status VARCHAR2(100);
l_msg_count NUMBER;
l_msg_data VARCHAR2(2000);
l_msg_index NUMBER;
l_user_id NUMBER;
l_resp_id NUMBER;
l_appl_id NUMBER;
l_org_id NUMBER := &org_id;
l_move_order_line_id NUMBER := &mo_line_id ;
BEGIN
SELECT user_id
INTO l_user_id
FROM fnd_user
WHERE user_name = 'PRAWILNSON';
SELECT responsibility_id
,application_id
INTO l_resp_id
,l_appl_id
FROM fnd_responsibility_vl
WHERE responsibility_name = 'Order Management Super User';
FND_GLOBAL.apps_initialize (l_user_id, l_resp_id, l_appl_id);
MO_GLOBAL.set_policy_context ('S', l_org_id);
MO_GLOBAL.init;
DBMS_OUTPUT.put_line ('Calling INV_MO_BACKORDER_PVT to Backorder MO');
DBMS_OUTPUT.put_line ('===============================');
inv_mo_backorder_pvt.backorder (p_line_id => l_move_order_line_id
,x_return_status => l_return_status
,x_msg_count => l_msg_count
,x_msg_data => l_msg_data);
DBMS_OUTPUT.put_line ('Return Status is : '|| l_return_status);
-- Check Return Status
IF l_return_status = fnd_api.g_ret_sts_success THEN
DBMS_OUTPUT.put_line ('Successfully BackOrdered the Move Order Line');
COMMIT;
ELSE
DBMS_OUTPUT.put_line ('Could not able to Back Order Line Due to Following Reasons' );
ROLLBACK;
FOR j IN 1 .. l_msg_count LOOP
FND_MSG_PUB.get(p_msg_index => j
,p_encoded => fnd_api.g_false
,p_data => l_msg_data
,p_msg_index_out => l_msg_index);
DBMS_OUTPUT.put_line ('Error Message is : '|| l_msg_data);
END LOOP;
END IF;
END;
/ -
Cannot cancel release stratigy after output is printed
Dear Expert,
I has been configuration output for PO ( print auto after release stratigy)
After I release stratigy there is a scenario that user need to cancel release stratigy
But the system is error not allow to cancel release stratigy after output is printed
What's I miss? thank you very much.
I release stratigy using ME29N and cancel using ME29N and ME28 also.
Best regards,
@tom _HI,
In ME9F itself try to repeat the output.
Thanks & Regards,
Kiran -
QT 7.1.2 not playing any QT movies after "Cleaning" using OnyX 1.5.3
I had this problems a few months ago, but did not associate it with having "cleaned" my user caches with OnyX. I needed to redo my Powerbook G4 with two partioned drives - one with Panther installed and one with Tiger installed - for some upcoming work flow testing at work. After performing the new install of Panther on the new partition, the Quicktime problems went away. That is until I ran OnyX yesterday and cleaned out my User caches. Now no movies are playing again. I suspect that OnyX may be removing some critical files needed by QT 7.1.2. In lew of reinstalling the OS again, I would prefer to just reinstall QT, but can find no Apple provided uninstaller or documentation on a manual removal process. I had tried to delete all QT components including all Receipts manually before, but there were remnant files remaining that prevented installation of the earlier version of QT7.
I was hoping someone here could provide instructions on how to completely uninstall QT 7.1.2.As Apple has yet to release a reinstaller, and if you really don't want to archive and install, you can use a shareware app like Pacifist - but it can be tricky. There are several threads in the forum that describe the process.
http://www.charlessoft.com/ -
Filmstrip Moves After Filtering Using Keywords
I used the Metadata filter to select photos. In my example, I had 33 pics with the Keyword "Unknown". The 33 pics appear on the filmstrip but the filmstrip slides all the way to the right. So, for example, I want to click on the first pic to the left and I have to slide the filmstrip and click on it, but then the filmstrip moves all the way to the right again. If I want to select multiple pics it is a pain to keep having to slide the filmstrip. This is REALLY annoying. I'm using LR 2.2 on a WIN PC. Is there some way to stop the filmstip from moving on its own? Thx.
JohnI used the Metadata filter to select photos. In my example, I had 33 pics with the Keyword "Unknown". The 33 pics appear on the filmstrip but the filmstrip slides all the way to the right. So, for example, I want to click on the first pic to the left and I have to slide the filmstrip and click on it, but then the filmstrip moves all the way to the right again. If I want to select multiple pics it is a pain to keep having to slide the filmstrip. This is REALLY annoying. I'm using LR 2.2 on a WIN PC. Is there some way to stop the filmstip from moving on its own? Thx.
John -
Message: cannot import xml, even after exporting using file, export, xml, and not touching the file
I need to change the messages for a different language. Has anyone been able to set this XML file to import? Some of the content is in Norwegian, but don't how that will affect it. But it will not import a file, even if it was just exported.
Hi Patrick,
I tried few import/export scenarios in captivate 7 and it works fine for me. I think it will be a good idea if you can mail me the .xml file along with steps to reproduce the issue.
My email id is [email protected]
-Tamish -
Cannot move icon files using my mouse or cursor after installing Mountion Lion's last update. After rebooting several times, this sometimes fixes the problem. I've tried checking and updating my permissions, but this hasn't worked. What's happening? I haven't backed up so I can't go back to Lion. Has this happened to anyone else? What can I try? Thanks!
Try this:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Now download and install OS X Mountain Lion Update v10.8.3 (Combo). -
Im trying to stop or cancel a movie download from itunes on my ipod. Does anyone know how to do this???
On your syncing cmputer go to iTunesStore>Check for available downloads. They shoud go there if problems dowloading them to yur iPod.
-
Help! I cannot connect Itunes store after my ipad 1 use ios5! Does anyone have a similar problem?
help! I cannot connect Itunes store after my ipad 1 use ios5! Does anyone have a similar problem?
Same :(
Do you have any problem with apps? I can download or update apps without problem. Also no problem with podcasts, but no music, no video or movie: cannot connect to iTunes Store :( -
Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?
Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD -
After updating with ios7, I cannot proceed because I cannot enter my password since it uses Greek letters but the keyboard available is Latin. How can I change the keyboard to Greek?
try tapping holding on the key that would be most similar to the letter you want to enter, that will bring up a menu of other characters similar to that character and maybe the greek letter will be included in that menu
-
i get a message when trying to sync..."requried disk cannot be found" even after enableing disk use
First make sure you are using the most up to date version of iTunes and have all the latest Windows updates/patches installed on your PC. From there, try again and if still no luck, make sure you are plugging your iPod into a high powered USB 2.0 port.
Otherwise try these steps:
1. Run “c:\WINDOWS\system32\devmgmt.msc” (i.e. *Device Manager*), and leave it open for now for later use
2. Start up iTunes
3. Next, connect your iPod.
4. Go to your iPod Settings and select the “Enable disk use” option from under theSummary tab.
5. A dialog box will pop up reminding you that you’ll need to manually eject. Go ahead and hit OK
6. Hit Apply to save changes to the iPod
7. Quickly switch to the Device Manager window and right-click on any item within the window and select “Scan for hardware changes”
8. Finally, switch back to iTunes, and try re-syncing your iPod to see if it helped.
It might not also hurt to trash your iPod's Photo cache if it has one (i.e. you sync photos to the iPod). See this article for information on where to find this folder on your Windows XP machine.
http://support.apple.com/kb/TS1314
B-rock -
My MacBook Air running on Snow Leopard gets extremely slow (almost like a hang, except if you wait about half an hr, it actually moves) after login interface. Sometimes it never gets past the background of the homepage, desktop doesn't seem to load. After multiple forced shut downs and left to run for hours, sometimes the desktop loads but the dock does not respond when applications are opened. The computer is then unable to shut down normally. Forced shut downs are necessary most times. Time machine backup takes extremely long, and attempts to use the time machine to bring the laptop back to the time befiore the problem arose was met with extremely slow and hung time machine function.
Please help!There isn't much besides a failing hard drive or other hardware fault that can cause those symptoms. Run the Apple Hardware Test, or just take it to an Apple Store for testing.
-
When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?
When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?
What happens when you click the Save/Download button after the file conversion is complete?
-
Hi,
I have a iphone 3G, at first is disable due to my nephew keep guessing the password, after i use my macbook air to restore & download now totally cannot on.
May i know what can i do now?Step 1
Reset the System Management Controller.
Step 2
If there's no change after Step 1, reinstall the OS. Back up all data first.
Maybe you are looking for
-
I use a Windows XP Laptop and Firefox browser ( free don't remember the version). My hard drive crashed today 31.07.2011 and I installed a new hard drive with installed Windows XP. I have just downloaded Firefox 5.0.1 ( free version) and would like t
-
IMessage won't sign in after upgrade to Mountain Lion
Just upgraded from Lion to Mountain Lion. FaceTime and iMessages can't log me in. In iMessage Setup, I use my default AppleID and password (that I use on my other iOS devices), and it says "Could not sign in. Please check your network connection and
-
I have the old windows on my computer and would like your expertise:)
-
HI All, In file to file scenario, i am trying to archive the file being sent by the source. But it's not showing up in the archive directory. The scenario is working fine, i am getting the file at the target end as req. But why is archiving n
-
'NETWORK' ICON IN 'MY COMPUTOR' MISSING IT'S IMAGE ..?
Hi my network icon image is missing when i open 'my computor'. Only the title 'network' is visible. It's always like this, even after restarts and repaired permissions. The network icon does appear whole in the finder menu bar. Any ideas anyone??? Th