Cannot change numeric min max property

Hello everybody,
By right clicking on a numeric control I cannot change the minimum and maximum range. (it is always returning to 0 after typing 25 for example at the maximum value, the numeric is UINT16).
This is happening on every vi in my project, even if I create a new empty one.
BUT, it is not happening when I close labview, re open labview and open an empty vi (not in the project). This way, I can change the maximim property of a numeric, as usual.
Is there a project property that forbid to change numeric property, in all vi in the project ?
I am missing something ?
Thanks for your help.
ps : I use labview 8.6.
Solved!
Go to Solution.

I made additionnal tests.
If I  put a new numeric1 DBL on the FP on a vi in my project, I can change the max property to 5.1 for example.
If I put a new numeric2 DBL on the FP, and I change the max property to 6.1, the max property 6.1 is automatically set also on numeric1.
If I put a new numeric3 UINT on the FP, the default value to max property is also 6.1, that is strange for a UINT.
It seems that what is happening is dependant of what is the first numeric I put in the FP.
The beahaviour I was previously describing what because I first put a command in the FP that was a typedef of a cluster containing different numerics.
I really don't understand what is happening, because I rthink it is not the first time I use min max property, and I never had such a problem as far as I remember.
Thanks for your help.

Similar Messages

  • Cannot change numerous History settings in Privacy tab (is Norton 360 and/or Avast causing this problem?)

    I have Norton 360 and Avast Internet Security 2014.
    I AM able to change most Firefox settings.
    I am NOT able to change numerous Privacy settings (mainly History and Use custom settings for history, including all subsettings). When I change certain Privacy/History settings, the browser tells me it must close and restart to disable this existing setting. When I open the Privacy tab after browser restart, I see that the change(s) I made did NOT take effect.
    I have two enabled firewalls, managed by Norton and Avast, respectively (the Windows 7 OS firewall is disabled, probably because of the third-party management by Norton and Avast).
    ***What, specifically, is causing this problem (being unable to change some important Privacy/History settings), and what can I do to regain the ability to make any and all Privacy setting changes whenever I want to?
    Thanks.

    Speaking of avast!, you may want to disable the avast! Online Security extension. A variety of odd problems have been reported with it. You can do that on the Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions.

  • How to change the Charge Account in Requsitions Generated by Min-Max

    Hi
    I want to change the default account coming in all requsitions which are generated in result of a min-max report.
    please help.
    thanks
    Malik Asif Joyia

    What is your costing method?
    If it is average, the account comes from the organization and not from subinventory and you cannot change the account if the destination is inventory.
    If it is standard, you can have the account from subinventory, but again you cannot change it if the destination is inventory.
    Why do you want to change account if you are receiving into inventory?
    And Min-Max Planning is to replenish the inventory hence I would assume it is not expense destination.
    Thanks
    Nagamohan

  • Gauge Min.Max - change dynamically

    Hi
    I have a gauge that is a dial. All I want to do is be able to scroll up and down the data and have the mins and maxs change.
    I have tried everything to do this - no luck. The fusion manual claims it can be done although I can work it out.
    "Minimum and maximum: Optional values that identify the lowest and highest points on the gauge value axis. These values can be provided as dynamic data from a data collection. They can also be specified as static data in the Gauge Data attributes category in the Property Inspector for the dvt:gauge tag. For more information, see Section 25.4.4, "Adding Thresholds to Gauges"."
    Any ideas? I have put the data in a grid and the metric changes but the min,max do not.
    Example - Fuel Tank - I want the gauge to have the min and max change to reflect the min.max column values.
    id min max fuel
    1 0 200 100
    2 0 500 233
    3 0 1000 130
    Cheers
    Darren

    My gauge looks as simple as this
    <dvt:gauge id="gauge1" value="#{bindings.EmpView1.gaugeModel}"
                             gaugeType="DIAL"
                             animationOnDataChange="ON" >
                    <dvt:gaugeBackground>
                      <dvt:specialEffects fillType="FT_GRADIENT">
                        <dvt:gradientStopStyle/>
                      </dvt:specialEffects>
                    </dvt:gaugeBackground>
                    <dvt:gaugeFrame/>
                    <dvt:indicator/>
                    <dvt:indicatorBase/>
                    <dvt:gaugePlotArea/>
                    <dvt:tickLabel/>
                    <dvt:tickMark/>
                    <dvt:topLabel/>
                    <dvt:bottomLabel/>
                    <dvt:metricLabel position="LP_WITH_BOTTOM_LABEL"/>
                    <dvt:thresholdSet/>
                  </dvt:gauge>

  • MRP min max reorder level changes

    Hi All,
    I wonder if anyone could please help.
    We are experiencing some issues with the setting of min/max levels for material masters.  Does anyone know how I could get a change log to show changes to the material master MRP settings?
    Thank you
    Chris

    Hi Chris,
       You can see change log for material master through TCode MM04.
      On the MM04 screen you can enter the selection parameters - Material / Plant / Sales Organization / Distribution Channel, Warehouse Number / Storage Type etc.,
       If you have a specific SAP userid whom you think might have done the change then you can enter in the Changed by Field.
       Then click on Execute button.
       In the next screen, select required line and click on details button to see the Old value and the new value data.
      Hope this helps.
    With Best Regards,
       Srinivas

  • Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him mine. Want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address.

    Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
    Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!

    Hey Fagen!
    You will want to see the following article for guidance on achieving the result you wish to achieve:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • DateTimeAxis min/max bug? Problems with consistent padding. Date Wrapping.

    I have been working on a problem with a BarChart object that I've created using dynamic data.
    My primary issue is that I can't seem to get the proper min/max values to set for the chart.
    To solve this I manually found the min and max of the data set of Dates and set the min and max of the chart. This allowed me to finally see all the floating custom bars (each bar is rendered with a user set fill), however now if I have a bar that extends over a year change the horizontal axis labels do not wrap the date properly, so instead of 2/10 (feb 2010) being the last date, 12/09 (dec 2009) is the last date.
    I've been trying to dynamically adjust the padding based upon a change event, but so far to no avail. Partially I think because I'm not sure which event for the function to fire on.
    private function dateAxisGen(r:Array):void {
                    var min:Number = r[0].startTime.time;
                    var max:Number = r[0].endTime.time;
                    const PAD:Number = 2;
                    const MILLISEC_IN_MONTH:Number = 2629743830;
                    const MILLISEC_IN_WEEK:Number = 604800000;
                    const MILLISEC_IN_DAY:Number = 864;
                    for (var i:int = 1; i < r.length; i++) {
                        var o:OperationXT = OperationXT(r[i]);
                        min = Math.min(o.startTime.time, min);
                        max = Math.max(o.endTime.time, max);
                    // Calculates the maximum range, then adds an appropriate
                    // padding to the chart via extra time. TODO
                    /* var range:Number = max - min;
                    if(range >= MILLISEC_IN_MONTH) {
                        dAxis.padding = (MILLISEC_IN_WEEK/1000000)/PAD;
                        dAxis.padding = (MILLISEC_IN_WEEK/1000000)/PAD;
                    } else if(range >= MILLISEC_IN_WEEK) {
                        dAxis.padding = (MILLISEC_IN_DAY)/PAD;
                        dAxis.padding = (MILLISEC_IN_DAY)/PAD;
                    } else {
                        dAxis.padding = PAD;
                    dAxis.minimum = new Date(min);
                    dAxis.maximum = new Date(max);
    this, however, does not adjust the padding properly when an operation is removed from the list. Not to mention I still have the date wrapping error. It gives me the following error:
    Cannot access a property or method of a null object reference.
        at mx.charts::AxisRenderer/measureHorizontalGutters()[C:\work\flex\dmv_automation\projects\d atavisualisation\src\mx\charts\AxisRenderer.as:2244]
        at mx.charts::AxisRenderer/calcRotationAndSpacing()[C:\work\flex\dmv_automation\projects\dat avisualisation\src\mx\charts\AxisRenderer.as:1858]
        at mx.charts::AxisRenderer/adjustGutters()[C:\work\flex\dmv_automation\projects\datavisualis ation\src\mx\charts\AxisRenderer.as:1534]
        at mx.charts.chartClasses::CartesianChart/updateAxisLayout()[C:\work\flex\dmv_automation\pro jects\datavisualisation\src\mx\charts\chartClasses\CartesianChart.as:2239]
        at mx.charts.chartClasses::CartesianChart/updateDisplayList()[C:\work\flex\dmv_automation\pr ojects\datavisualisation\src\mx\charts\chartClasses\CartesianChart.as:1366]
        at mx.core::UIComponent/validateDisplayList()[E:\dev\gumbo_beta2\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8065]
        at mx.managers::LayoutManager/validateDisplayList()[E:\dev\gumbo_beta2\frameworks\projects\f ramework\src\mx\managers\LayoutManager.as:663]
        at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\gumbo_beta2\frameworks\projects \framework\src\mx\managers\LayoutManager.as:736]
        at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\gumbo_beta2\frameworks\ projects\framework\src\mx\managers\LayoutManager.as:1069]
    Any help with my problem would be greatly appreciated.
    ADDITIONAL INFO:
    Alright, so I've discovered that the ONLY time the date wrapping error occurs is when the axis labels contain only the month and year, any other time it places it properly.
    Does anyone know where I can report this bug?

    Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
    It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
    Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
    Look at save_absolute_paths_in_playlists in your mpd.conf.

  • Min/Max  Internal Orders 1 Requisition

    We are running Min/Max planning to replenish stock in an "Emergency Warehouse" organization. The requisition import kicks off internal orders to a replenishment organization. The planner in the replenishment organization would like one order for each Min/Max run. The requisition group-by default in Purchasing parameters is vendor yet we are still seeing one unique requisition for each item thus creating one unique internal sales order per item. Thoughts?

    Stick wrote:
    The requisition group-by default in Purchasing parameters is vendor yet we are still seeing one unique requisition for each item thus creating one unique internal sales order per item. Thoughts?In this case the requisitions will not be grouped by Vendor because the supply source is Inventoy which is creating internal requisitions and not purchasing requisition (source is Supplier/ Vendor).
    It is important to know how you are importing requisitions and what value is specified for Group By parameter during import. The value you setup in Purchasing Options defaults in the Requisition Import request parameter screen, but this can be changed before submission. So it is possible in your case that requisitions are imported using a different group by than what is specified in Purchasing Options.
    From the list of different group by options available (All, Buyer, Category, Item, Supplier) you can probably use 'Location' during requisition import.
    Location: Group requisition lines for each delivery location on a separate requisition.
    But this will not guarantee 100% success because:
    - If you import requisitions with source as INV then those can include requisitions from different INV sources generated from Reorder, Kanban etc having same delivery location. In that case all those requisitions will be grouped under a single header having same location.
    - there may be different users running requisition import manually and some may forget to change this group by parameter (defaulted from purchasing options) while importing Min-Max planned requisitions (again they cannot segregate Min-Max, they can just specify INV as source)
    A better solution would be to use the oracle provided custom hook (po_reqimp_pkg.post_validate_user_extensions) for requisition import to populate the GROUP_CODE column in PO_REQUISITIONS_INTERFACE table. The logic inside the hook should identify the rows in the interface table generated from each run of Min-Max and populate a unique value for all those rows in the GROUP_CODE column. You need a small piece of code to be added inside the hook.
    You can also use REQ_NUMBER_SEGMENT1 column in the interface table to populate an unique value for all rows you want to group together. But in this case the value you specify will become the requisition number if there are no conflicts with the requisition number rule. Both these column, when populated, have precedence over Group by parameter. 1st priority GROUP_CODE (if populated). If GROUP_CODE is not populated then it checks REQ_NUMBER_SEGMENT1. If this is also blank then it uses Group By parameter.
    Thanks
    Supro

  • Issue with min/max when vertical axis assigned to multiple series

    Hi.
    I have some simple charting code that is dynamically adding LineSeries to a chart as the user requests them from the gui. As each series is added the vertical axis is assigned to the series and then data is requested and assigned to the dataProvider on the series. This is all working fine however I have found that if I add a sceond series after the first series is displayed and assign the same vertical axis to the second series then the vertical axis seems to set teh min/max based only on the second series added and ignores the first series. It doesnt set to the max of both series and so I get an incorrect max set. If I add a 3rd series the same happens again and the first and second series values seem to be ignored and the axis is set based on the last series to be added.
    Is this expected? Ive tried different variations of invalidating the data/series/styles to force it to refresh but I always get the same. It does refresh but based on only the values in the last added series.
    What is odd is that if I add 2 series at the same time, and assign the axis to both of them and then request data for both and update the dataProvider on both of them the axis is configured correctly based on the max value of both series.
    Any workarounds to make it do the right thing if they are added dynamically? Is this a bug or a known "feature"?
    Any light anyone can shed would be appreciated.
    I need to have the axis assigned to the series directly as I want to be able to use multiple axes. I have found that if I set the verticalaxis on the chart rather than the series then it works fine and sets the min/max based on the combined values of both series.
    The vertical axis is just a simple LinearAxis.
    Any help or suggestions would be appreciated.
    Im using Flex 4.1
    Tks
    Dan

    Adobe Flex LiveDocs seemed to indicate "Using multiple series in the same chart works best when the data points are in a similar range (such as a stock price and its moving average). When the data points are in numerically very different ranges, the chart can be difficult to understand because the data is shown on a single axis. The solution to this problem is to use multiple axes, each with its own range. You can plot each data series on its own axis within the same chart using the techniques described in Using multiple axes" and that link is here:
    http://livedocs.adobe.com/flex/3/html/help.html?content=charts_types_11.html
    I was going to tae a look at this myself, but the code posted here is quite complex, and I suspect incomplete.
    If you refer to that link and still cannot solve the issue, I would try your best to boil down your code to a more simple example still exhibiting the issue, and then post that, along with any data and the simplified main app.
    If this post answers your question or helps, please mark it as such.
    Greg Lafrance - Flex 2 and 3 ACE certified
    www.ChikaraDev.com
    Flex / AIR Development, Training, and Support Services

  • How to set physical min/max values for a scale in xy graph?

    Hello,
    I have troubles with the way LabView handles physical units in xy graphs. In particular, I use a time scale for the x axis.
    The values are timestamps and have the unit [s]. Now I want to read write the min max values for this scale via
    property nodes. It seems that the properties for min max do not support the use of the unit I use for the data for
    that same axis. This is very inconvenient and I am not even sure which kind of data to use at all for this properties.
    Is it simply converting to/from [s] using the unit converter?
    (I am using LabView 7.1 for the programm in question).
    Thanks,
    Olaf

    Hi Olaf
    "It seems that the properties for min max do not support the use of the unit I use for the data for that same axis."  
    What are the units you are using? can you make it a littlebit clear.
    You can change the units also using Property node.
    Just check the attachment once. If that is what you are looking for, then the problem is solved.
    Regards
    Anil
    Message Edited by reddy on 05-23-2006 05:25 AM
    Message Edited by reddy on 05-23-2006 05:27 AM
    Attachments:
    X-Scale.jpg ‏8 KB

  • Q - How to program the min/max values of an intensity graph

    Hi LabViewers,
    I'm looking for a way to program the min/max Z values of an intensity
    graph for image display properly, but unable to figure it out so far.
    Any idea?
    Chengye

    Right click the graph's control on the block diagram and create a property node.  Right click the node and Change all to Write.  RIght click the node again and select from Properties either the combined ZScale->Range->All elements  -or- you can individually define 2 property nodes for Max and Min (also under Zscale->Range).
    Message Edited by Jonnie 5 on 12-14-2005 03:07 PM
    2006 Ultimate LabVIEW G-eek.

  • Time phase Min/max replenishment models for future dates

    Hi,
    We are working on a safety stock requirement of Maximum/Minimum replenishment model in APO.
    It seems to work great except it cannot be time phased.  Our business wants different safety stock strategies at different times of the year. 
    Please suggest if there is a way that we could “time phase” min/max replenishment models for future dates?
    Thanks in advance for your help!
    regards
    Yogendra

    Many thanks for this.
    I can see entirely why it's designed as such, but I just find it slightly frustrating that there's no way to break the link between the order and the shipment out to the depot. Just to clarify, we're not requiring the orders to change - they will still be made and will come in - but just that the orders themselves don't specifically need to be the stock that is used for the replenishment.
    So -
    1. Min Max identifies depot needs replenishing.
    2. Central distribution does not have (enough) stock to replenish.
    3. Order is made to replenish central distributions stock.
    4. We ship whatever we've got, when we've got it, to depot to replenish.
    It's the bit where Min-Max is trying to replensih a specific depot rather than our central distribution centre that's my problem.
    I suspect that, as you say, that specific issue is not directly fixable without getting our IT contractors to do a customisation.
    I'm going to look into your Supply Date Offset suggestion now, though I'm not sure how this affects the shipping after the orders are placed. The orders themselves are approved manually after we've checked our stock position (i.e. what's in with the recycling team), but we recycle & refurb probably 60% of our maint stock so there'll always be kit turning up after the order has been made because of the long lead times.
    Thanks again.

  • I changed my apple id email address to try jumpstart my account to send me a verification email for iCloud activation.  It worked but now I cannot change back to my original email address.  It says its in use.

    Hi Guys
    I am writing this on behalf of a friend of mine.  To understand my issue let me explain how it started.  My friend has a apple ID with email address (lets call it) [email protected]  when activating iCloud on her iPhone a email was sent to verify her account.  This was not done and rendered the iCloud feature disabled due to not being activated.  [email protected] is the correct email address and works.  A form of troubleshooting I used the iForgot service to test if the email address was correct and mail flow from apple was working and it worked fine.
    I logged into apple id to manage account and resend activation email for iCloud.  this did not send the mail.  I waited 48hrs but to no avail.
    I decided to kickstart the account to force it to send to another email address by changing the primary email address from [email protected] to [email protected]  it worked and I verified the address and iCloud is now active.  However now I cannot change the primary email address back to [email protected] as it says its being used by another apple ID. 
    I then tried iForgot with the [email protected] email address, it says it sent a email to [email protected] but nothing arrived in [email protected] or [email protected]
    I have this feeling the [email protected] is stuck I'm memory on my apple ID some how but can't get it to forget [email protected] so that I can use it as my primary email address again.
    I have tried to log into iTunes with my original details [email protected] and password but says its incorrect.
    any advices in this would be greatly appreciated.

    The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.

  • Want to set Min Max for a material for PD MRP type

    Hi,
    I know Maximum stock level field in Material master MRP 2 view ? but where do i maintain minimum stock level? not procured?
    My client wants to set up his inventory with Min Max levels using MRP PD?
    Thanks and Apprecaites help.
    Regards,
    Siva

    Hi,
    If you want to maintain a Max and Min stock level, Maximum stock is shown straight away, you cannot find the Minimum field directly.
    if you want to use MRP type PD then go for safety stock that will be your minimum stock level
    or else use Re-order point planning, re-order point will be your minimum and Max-level as maximum.
    Thanks
    Satya

  • Can we use MRP to plan for FERT in-house produced  with PIR's & has Min/Max

    Hi SAP Guru's
    I have a very critical issue from the client who wants to use MIN/ MAX stock values for planning its finished products (in-house produced)
    <b>here is the details of the scenario</b>
    Client recieves 2 Excel files every week from customer
    <b>1st</b> file contains the Weekly Demand Forecast of FERT material for next 1 year and they upload it in MD61 as PIR's <u><b>BUT</b></u> this value is also <u><b>Inclusive</b></u> of Safety stock value (<b>ex: if weekly demand entered in MD61 as PIR is 50 and if safety stock value is 10, then actual demand is only 40)</b>
    <b>2nd</b> file send contains only <b>safety stock values</b> (for ex in this case let it = <b>10</b>) to be maintained for the FERT materials
    the client wants MRP to plan and trigger based on this PIR's in MD61 and Safety stock level fand plan for FERT, HALB and also ROH materials as defined in the BOM also taking into consideration the current WIP levels (Work in progress for any existing production orders currently being processed) based on the production Lead times values maintained
    so what the client wants is they want to maintain 2 stock values, that is one least stock value and other higher value which if stock falls below this point, will trigger production based on the lead time and considering any WIP levels also
    <b>(for ex in this case if PIR = 50 and safety stock is 10, MRP run result client wants is = 30 and NOT =40)</b>
    so here are my questions
    1. is this scenario feasible? use safety stock and min/max level for in-house produced finished which has demand PIRs in MD61 at the same time?
    2. Also due to SOX complaince regulations, the client does not want to change the forecast values in MD61, so is it possible to make some settings so that forecast is corrected by WIThOUT including the safety stock value in it? ( for ex: in this case as = 40 only and NOt as 50)
    3. which all settings should i maintain like for MRP type or lot size or stock qty levels or anyother customizations if any required so that when we run MRP, can it ignore the safety stock value and generate the client desired output?
    thank u verymuch for your time & expert advice in advance

    Hi Chakri,
    This is not possible as per standard functionality. MRP always creates proposals for the shortage quantity of the safety stock. We have used the user exit in the plant level MRP run to exclude both plant and safety stock in the net requirements calculation.
    You have to write logic to convert the safety stock into plant stock in the user exit so there will be no additional procurement proposals...you can create custom indicatar in materail master or linked any existing indicator like MRP group to the user exits so the MRP will checks this and will not create proposals for the selected parts.
    If you have any questions then please inform.
    Regards
    TAJUDDIN

Maybe you are looking for