Cannot change password expired password

Hi there,
I am not able to change expired password on Windows server 2012. I am getting the error message that "You must change your password before logging on the first time. Please update your password or contact your system administrator or technical support"
I had similar issue in Windows 2008 servers and was resolved when I changed the the RDP security layer to negociate. But I couldn't find Session host configuration snap-in since RDS is not enabled.
Any one faced same issue?
Thanks,
Ranjith

Hi Ranjith,
How are things going?
You could try to change the Security Layer to
RDP Security Layer in the Security section of
Session Collection properties.
In addition, if you are using remote desktop over RD Gateway, there is no support for being able to use the “User must change password at next logon”.
Please refer to these two threads which is similar with your issues.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/320ef31a-1160-4c33-9912-79a3838fc24d/forcefuly-user-should-change-his-password-when-loggin-for-the-first-time?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/8761e29a-72a0-4f9c-b31b-ff81633020dd/user-must-change-password-setting-using-rdp-to-server-2012?forum=winserverTS
Hope this helps.
Best Regards,
Tina

Similar Messages

  • I reset my apple ID password and realized my e-mail address has been changed.  I cannot retrieve my password because I cannot get the email.  So I am stuck in a loop with the apple support page.  I cannot change my forgotten password or my email address?

    I lost my passwrod and my e-mail address has now changed.  On the support page I cannot reset my password without my old e-mail and I cannot change my e-mail address without my password.  Any thoughts?

    You apparently did not migrate your MobileMe account to iCloud before 1 August? In this case your MobileMe account has been permanently deleted and all its contents lost, as was announced over a year ago.
    Your signature says your Mac has 10.6.8; you cannot set up an iCloud account on that. However you can reactivate your @me.com address (though not retrieve its contents including any aliases) by going to Settings>iCloud on your iPhone (iOS5 required), signing in with your @me.com address and password, and enabling Mail in the list there.
    That done, you can set up Mail manually on Snow Leopard to access your iCloud email:
    Entering iCloud email settings manually in Snow Leopard or Leopard

  • How to check: password expired,password forced to change,user disable

    I am writing application to detect the following. I just need to check whether the condition is true. What are the things that I need to check for:
    - when a user password is going to expired in x days?
    - when a user is forced to changed a his password?
    - when a user is disabled? For this, do I check the attribute "nsaccountlock=true"?
    Chooichin

    I am writing application to detect the following. I
    just need to check whether the condition is true.
    What are the things that I need to check for:
    - when a user password is going to expired in x
    days?
    you can use he passwordControls during a BIND operation and investigate if the password expired/expiring in so many secs
    - when a user is forced to changed a his password?
    - when a user is disabled? For this, do I check the
    attribute "nsaccountlock=true"?Yes, if some interface is actually using this to disable the user in the first place.
    >
    Chooichin

  • I have a macbook pro (13inch). I had a firmware password set on it and updated the firmware when apple update told me to. I cannot change the firmware password or remove it now.

    Hello,
    I have a macbook pro which had a firmware password set on it (security-mode = command).
    Update asked me to install updates and one of them was an EFI update. I proceeded and the macintosh booted just fine.
    I've tried changing the firmware password, and removing the password without success so far. It's almost like the nvram terminal command does nothing as far as security is concerned.
    Help would be appreciated!
    J

    Apparently the newer macbooks use a different utility than the older macbooks.
    setregproptool will ask for the current password, and nvram is not used for these anymore.
    J

  • DS console operators cannot change their passwords?

    I've setup named developer accounts with the operator role, so that (among other things) they can tell who has an object checked out. But it seems that console users cannot change their own passwords: someone with administrator access needs to do it for them? Is that correct? This goes against best practices, where an administrator can reset a password but the user then changes (preferably, the are forced to change it on first logon). If that is the case, hopefully it's addressed in the next release (we are using SAP BusinessObjects Data Services, version: 12.2.3.0).
    Regards,
    Sean

    Requiring Guests to Change Password
    You can allow or require guest users to change their password after their initial account credentials are created by the sponsor. If guest users change their passwords, sponsors cannot provide guests with their login credentials if they are lost. The sponsor must create a new guest account.
    You can either allow guests to change their passwords, or you can require that they do it at expiration and at first login. To require internal users using a guest portal to change their password upon their next login, choose Administration > Identity Management > Identities > Users . Select the specific internal user from the Network Access Users list and enable the change password check box.
    Before You Begin
    Create a Guest portal or modify the DefaultGuestPortal. This setting is specific to each Guest portal.
    Step 1 Choose Administration > Web Portal Management > Settings > Guest > Multi-Portal Configuration.
    Step 2 Check the Guest portal to update and click Edit .
    Step 3 Click the Operations tab.
    Step 4 Check either or both options:
    Allow guest users to change password
    Require guest users to change password at expiration and first login
    Step 5 Click Save .

  • Change expired password using oracle jdbc thin driver

    Hello,
    I have a java program that uses the oracle jdbc thin driver (ojdbc6 - version 11.2.0.3) for database connection. My question is if I have any possibility to change an expired password (java.sql.SQLException: ORA-28001: the password has expired) using the thin driver - NOT OCI?

    No - the thin driver doesn't have any password management features.

  • TS3988 cannot change password

    I cannot change my iCloud password - anywhere.  In the iCloud View Account panel, there  is absolutely no option available to change password.  Are there any online options??

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.

  • Resetting expired password from JDBC

    Hi All,
    I would like to know if it is possible to change an expired password from a java client that uses JDBC (classes12.zip) "thin client" to connect to oracle database (8.1.7.4).
    Can we capture the "password expired" exception from the client and change the expired password from within the java client.
    The current connect string is --->
    Connection conn;
    DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
    conn = DriverManager.getConnection("jdbc:oracle:thin:@host:port:sid",user,pass);
    Is it possible to do something like this ???
    try {
    conn = DriverManager.getConnection("jdbc:oracle:thin:@host:port:sid",user,pass);
    catch ( SQLException sqle ) {
    if ( sqle.getErrorCode() == 28001 ) // i.e. passwd expired
    //1. ask user to enter the new passwd &
    //2. change it in the database.
    Is there any other way of doing this ??
    Thanks in advance
    Arun

    I haven't tried this, but there some things to think about.
    1) Have you tried to capture the Exception? Is it a problem?
    2) Have you tried to alter a password through JDBC? Is it a problem? To execute other DDL you have to use executeUpdate() I would assum that if you can do this it will also require an executeUpdate().
    Now assuming #1 and #2 are OK
    3) How are you going to change a password when the you cannot connect because the password has expired? Are you going to hard code another non-expired userid/password in the code (bad idea). Are you going to ask the user to enter some type of administrative userid/password that will allow them to change their password?
    Just some thoughts, sorry I cannot help more...

  • Resetting an Expired Password

    Hello All
    I am not sure if this is the right forum so please let me know if not.
    I currently have an ASP page that authenticates users against a Sun ONE LDAP server. The problem we seem to have is that when a users password expires, we cannot bind anymore. The easiest way for us to sort this would be to get the "Password has expired" return code but I cannot work out how to do this in ASP.
    Or is the problem deeper than this and once a password has expired a user cannot reset it? Do we need to change something else to allow a user to bind with their old password to reset their password. Remembering we are trying to do this all with asp.net.
    Thanks
    D

    I also am ignorant of asp.net; however, Sun DS 6 has several features that can help solve your problem if you can figure out how to access them:
    1. If you configure the "expiration warning" feature in the password policy, once a entry's password is in the warning period, an unsolicited "expiration warning" control is returned with each bind. The control data is the seconds until expiration. Password policy configuration is documented in http://docs.sun.com/app/docs/doc/820-2491/fhkrj?a=view . You can search for "OID 2.16.840.1.113730.3.4.5" on google for info about the control. You should also become familiar with the unsolicited password expired control "OID 2.16.840.1.113730.3.4.4". These controls are also implemented in DS5.
    2. If you supply the bind (or most other) operation with the IETF draft password policy request control, Sun DS 6.1 and later return a (properly encoded) password policy response control containing password policy operational state. Search for "OID 1.3.6.1.4.1.42.2.27.8.5.1"
    3. Your application can request the operational state of an entry via the user status control in Sun DS 6.1 and later. Search for "OID 1.3.6.1.4.1.42.2.27.9.5.8"
    4. If you have implemented some form of expiration warning, then presumably the majority of your users will have changed passwords before expiration, and you can force the others to go through some self-service or help-desk password reset function (i.e., enable must-change-on-reset, then administratively change the user's password, forcing him/her to change it at next bind).
    5. If you want to allow users with an expired password to access the DS solely for the purpose of changing the password, see http://docs.sun.com/app/docs/doc/820-2491/6ne3dhdht?a=view#resetting-expired-passwords . If you do some more investigation on Sun DS (6.2 and later) implementation of the password modify extended operation (and ldappasswd), you should find details on enabling the extension to allow a user to change an expired password.
    6. You might also take a look at http://docs.sun.com/app/docs/doc/820-2490/6ne3cisoj?a=view#pwdpol for an overview of the new password policy implementation in DS6, compared to the DS5 password policy, and the strategy to migrate from DS5 to DS6.

  • Prompting for expired passwords

    The SQLDeveloper interface does not appear to prompt users to change their expired passwords. Our developers use SQL*plus for their initial login to change their expired passwords, yet does anyone know an easier way? __thanks

    You might want to vote for this feature at the Feature Request Page
    http://htmldb.oracle.com/pls/otn/f?p=42626:39:2000715527217488::NO::P39_ID:2321

  • 802.1X cannot change expired password at login

    Hi all,
    I'm trying to roll out 802.1X authentication for wifi access at my company, however there's one major problem I can't for the life of me figure out. I'm not able to get the Macs to prompt for a password change when the password has expired at login.
    On Windows when you log in it will prompt you to change your password when it's expired. However on OSX when you're on the workstation login screen, you can see the wireless icon briefly connect, then it will think for a bit and the user cannot log in at all.
    OSX can definitely can change expired passwords via 802.1X, as if I log into a local account and connect to the wifi with the user whose password has expired, it will prompt to change it, and changes it successfully.
    I'm using NPS for RADIUS authentication against AD, and using Profile Manager in OSX Server to create the 802.1X profile.
    Does anyone have any experience with OSX and using WPA Enterprise/802.1X Profiles?
    Thanks!

    Hi,
    Can you post a screenshot for this situation?
    Sometimes, the third party credential provider would lead to some issue like this, I suggest you check the
     current credential provider via the following path:
    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\SessionData\x\LastLoggedOnProvider
    You should compare the result with the values in the following path:
    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\credential providers
    If the current value is third party credential provider, try to disable it:
    To disable the provider add a REG_DWORD value "Disabled"=1 to that provider’s CLSID subkey.
    The provider will be disabled on the next session creation (sessions are created when you log off, switch users, or reboot.
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • User cannot change expired password at logon

    Hi
    I've got 4 Fujitsu laptop with Windows 7 business SP1 x64 (Fujitsu setup). When the domain password expired, users cannot change their password at logon. Also, they can change password in their opened session before it expire (CTRL+ALT+DEL ==>
    change password).
    The change password at logon windows is buggy : It only display one field to put password in, the confirmation field does not display.
    When user valid is change, Windows display error "wrong username or password ". Only way to unlock this situation is to reset user password in ADUC and never let expire.
    I seen no sofware or driver wich could interfe.
    Domain controler (only one) is Windows server 2012 standard.
    Has somebody ever seen this type of problem ?

    Hi,
    Can you post a screenshot for this situation?
    Sometimes, the third party credential provider would lead to some issue like this, I suggest you check the
     current credential provider via the following path:
    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\SessionData\x\LastLoggedOnProvider
    You should compare the result with the values in the following path:
    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\credential providers
    If the current value is third party credential provider, try to disable it:
    To disable the provider add a REG_DWORD value "Disabled"=1 to that provider’s CLSID subkey.
    The provider will be disabled on the next session creation (sessions are created when you log off, switch users, or reboot.
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • Changing expired password on a cbckend database from a frontend database

    I have a split database with an Oracle backend (BE) and MS Access frontend (FE). My question is how to reset an expired password on the BE from the FE.
    If I log on to the backend via sqlplus an error ORA-28001 (Password expired) occurs and the system immediately prompts for a new password before completing the login process.
    If I log on from the frontend I get the same ORA error from the BE, but as far as I can tell, I can't reset the password from the FE.
    I can capture the error fine at the FE and I am thinking that I could use this to open a dialog to reset the password and change it over the ODBC connection. The problem is that I need to get a connection to the BE database before sending a command to change the password from the FE, but since login cannot be completed from the FE, because of the expired password, I can't get an ALTER USER statement to execute on the BE to reset the password.
    Is there a way to change a pre-expired password on an Oracle backend database from a frontend database? I don't see this as an Oracle/Access problem but as a problem that exists for any split database.

    I have thought about this a little and I am thinking about keeping a table of password update information. I can use this to create a "soft" expired password, using an expiration date in the table for each account. If the password is expired by the database then we can just update it with sqlplus or one of the other options.
    As far as getting the organization to change it is waaaay to big and stupid to change their policy.

  • HELP! Password Expired & Must Be Changed but Access Denied when trying to do so

    Hi,I have an HP 5740e thin client and for some reason the local user account is requiring a password change.  Yet, when I try to change the password it says Access Denied.  And further, I can't get it to allow me to switch to a different account like Administrator to login.  I've held down the SHIFT key when booting, but it still goes straight to that local user account & the expired password prompt. I'm stuck in an endless loop and don't know how to get out of it.  Safe Mode puts me into the same situation.  And I can't update BIOS because I can't get in at all. OS = Windows Embedded Standard 7 I've also tried to reinstall the latest image off the HP website using a USB drive but it fails every time. I've tried 2 different USB drives with same exact error no each.  Image trying to install = SP56020ERROR:  An unexpected condition occurred Does anyone have a suggestion?

    I was finally able to get in as Administrator using RDP from my desktop.  I didn't realize that the thin client name was missing a digit so that's why I was unsuccessful prior to this. Once I got in remotely, I was able to look at the permissions for the local user account.  Now I see what was wrong.[Checked]      User cannot change password[Unchecked] Password never expires I still don't know why I couldn't install a new factory image, but at least I'm now able to work with this unit.  I also disabled the auto login for now. Sorry to have littered the Forum!  

  • User cannot change password option is automatically getting unchecked while giving domain admin rights

    user cannot change password option is automatically getting unchecked while giving domain admin rights

    Greetings!
    "Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
    AdminSDHolder, Protected Groups and SDPROP
    Regards.
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

Maybe you are looking for