Cannot change the FPS of the Camera in Flash Media Encoder 3

Hi,
I am using a Sony HVR-A1 as a Webcam as we need good quality video streaming for live video feeds.
It does work well.
the only query I have is that the only choice offered on the FPS section is 29 frames per second.
I would like to be able to reduce that as it is too much for streaming.
Is their something I can do?
Cheers

I faced the same problem with my Swann cameras. My understanding is that FMLE won't capture from a device at an unsupported frame rate, and it sounds like the only framerate supported by your camera is 29fps.
I suspect the only way you could change this is to use another capture card (or software) that supports multiple frame rates between FMLE and the camera

Similar Messages

Flash Media Encoder with multiple cameras?

Hi,
Is it possible to stream 2 or more cameras on one computer
with Flash Media Encoder, or are you restricted to one camera per
machine?
Cheers

Hi,
As JayCharles explained to me, you run two instances of Flash
Media Encoder on the Computer. I was running 1 camera on just one
computer and so used 3 computers instead of using just the one
computer.
In my new case, I had 2 Cameras on the one machine.
When you launch Flash Media Encoder it will detect any
cameras you have on that computer, you will get a dropdown box so
you can choose which camera you want to use in this instance.
Choose the camera you want.
In the FMS URL box type the rtmp path to your Flash Media
server directory you want to stream this video to using either the
ip address or web address of the FMS server followed by the correct
path to where the file will be streamed to for example:
rtmp://192.168.1.10/vob/live
In the Stream Box type the name of the video file without the
.FLV tag, ie:
livevideo
Click the Connect button to connect the Video to the FMS
server.
When ready click the Start Button to start the stream.
So far you are streaming the video, but no one can see it.
Open a Dreamwaver page for example and go to:
Insert/Media/Flash Video (CS3)
or
Insert/Media/FLV (CS4)
Change the Video Type to Streaming Video
In the Server URI box type or paste in the rtmp address you
set:
rtmp://192.168.1.10/vob/live
In the Stream Name Box type in the Stream name you set in
Flash Media Encoder:
livevideo
The Skin type must be HALO, (Dont understand why you get no
choice)
Set the width and height of the Video on the page
Tick the Autoplay to play a pre recorded file, or tick Live
video feed if it is live.
Click ok.
If everything is correct then when you lauch the page the
video feed should be playing.
Lets assume it is, to add a second camera you just repeat the
same steps.
Open another instance of Flash Media Encoder on the Computer
you already have a feed running.
It might complain that the camera is already in use, as it
might try to connect to the same camera on the running application.
Open the Camera source dropdown and now choose the other
camera that should be available.
Put in the same info for the Server URI as you will also
stream to the same folder.
Chnage the Stream name now to:
livevideo2
Click Connect and also Start.
Open the Dreamweaver page you created for the first video.
Follow the same steps as before to create the Video on the
page
changing the name this time to livestream2.
You should now have 2 live video feeds on the same page using
two different cameras.
hope this helps.

Adobe Flash Media Encoder not detecting internal camera

I'm running OS X 10.8.5 and it won't detect the camera. I've installed the latest update from Apple that's suppose to address this error. After installing the new update I reinstalled Adobe Flash Media Encoder and it still doesn't work. The camera is also not being detecting on Skype. Reisntalled this as well. Anyone running into the same problems post update?

Verify that you are using the latest Flash version that works with you system:
http://www.adobe.com/software/flash/about/
If you need to update, use your Mac's Disk Utility to repair permissions.
Then follow Adobe's instructions here:
http://kb2.adobe.com/cps/908/cpsid_90893.html
Be sure to uninstall your current Flash player before installing the new one.
Repair permissions again immediately following installation of the updated Flash player.
Be aware that the current Flash Player Preferences can be configured to block your camera in your Mountain Lion Mac's System Preferences. However, you still configure Flash settings as shown here: http://tinyurl.com/5kjv3
Message was edited by: EZ Jim
Mac OSX 10.8.5

All tools in panels toolbar are disabled meaning I cannot change to any of the alternatives-E.g. Cannot select various Type tools as when I drag out I get the "disabled (Stop symbol)". Really need help with this, been like this for a while now. Many Thank

Panels tool bar is completely unresponsive. Cannot change to any of the alternatives.
I am using The most up to date Adobe Illustrator CC on Yosemite.

I actually can't believe I was being that stupid.
Thank you very much! This solves the issue.
Many Thanks,
Ronan

Cannot change Tax Code from the referenced sales order line

hi,
Has anyone ever got this error when creating Sales Order(SO): "*cannot change Tax Code from the referenced sales order line*"?
The error occur with order type Return.
This SO is created by copying from another SO.
Please help.
Regards & thanks,
eRie

hi,
Has anyone ever got this error when creating Sales Order(SO): "*cannot change Tax Code from the referenced sales order line*"?
The error occur with order type Return.
This SO is created by copying from another SO.
Please help.
Regards & thanks,
eRie

Shop told me that i cannot change my iphone4s because The warranty is out from Humidity..

My problem is the power button cannot press...
but I went to the shop
Shop told me that i cannot change my iphone4s because The warranty is out from Humidity..
I think it's not fair for me,
My iPhone never been soak the water before..
I think I used it in Thailand ,, it's tropical weather...
that's not my false ..
so why i cannot change?
Please tell me the good reasons.
Thanks

Here is the article about it:
iPhone and iPod: Liquid damage is not covered by warranty
Since we are all users here just like you, we can't do anything about decisions made by Apple.
You'll have to pay for a replacement:
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5
$229
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.
Message was edited by: Ingo2711

I cannot change apple id when the app store asks me to update anything

i cannot change apple id when the app store asks me to update anything

App Store products can only be updated by signing in to the store with the same Apple ID that was originally used to download them. You can't update anything, including your own purchases, as long as there are pending updates linked to the other ID.
If you can't sign in with the other ID, you have to delete all the apps that are linked to it. If you don't know which apps those are, see below.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
          File ▹ Find
from the menu bar. In the search window, select
          Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
          Other...
A sheet will drop down. In that sheet, select
          Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
3. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
4. At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Delete each such item by following the instructions in the Apple Support article linked above.
5. Quit and relaunch the App Store.
If you find these instructions confusing, ask for an alternative method.

Does the FPS in the .fla document effect the FPS in an imported .flv?

I think this may be related to another post I have, but I'm
not sure?
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=194&threadid=1265662&CF ID=45109516&CFTOKEN=f5a4ce0585fae4f3-66834EE8-E724-5FA7-C13B0CE0CCCB7A67&jsessionid=48305c 133dfd755d2f3b
Does the FPS in the .fla document effect the FPS in an
imported .flv? I notice the default FPS in a .fla is 12, but i
think most of my imported .flv are about 30 fps, will this effect
anything or does the flv overwrite the fla?
Thanks!

The FLV will play slow or fast if the rate is not the same as
the fla file. If you import the file but select the progressive
streaming method, the frames rates are separate for the flv and fla
and don't effect each other. That is the method you want to choose
most of the time, and it doesn't require a special server.

I can't see the preview of my source on Flash media live encoder ... I'm using CamTwist on mac

I can't see the preview of my source on Flash media live encoder ... I'm using CamTwist on mac

Carolyn,
I think your TV might be a rear projection model, correct? Those types of TVs inherently have overscan built into them as part of their optical design. The TV should have some picture SIZE settings that affect how much overscan is present, and some settings may even get rid of it altogether with the result there might be a small black border instead.
Don't worry about changing TV settings. Settings like this are tied to a specific input. So if you make these types of changes while the TV is passing the mini's video through to the screen, those changes will only apply to the mini. When you switch to other inputs, like a cable box, etc., the old settings should still be intact and unchanged.

Welcome to the Flash Media Encoder Forum

Welcome to the Adobe Flash Media Encoder forum! Ask
questions, discuss, and share feedback with other Flash Media
Encoder users.r

Sir i have a query
i install TV card in my system and flash media live encoder get encoding feed from the TV card and in video device selection i select 713xBDA analog capture which is shown in device selection drop down it is all ok but
i want to show this live feed on by flash palyer or my browser.
for camera we use get camera function and others but for TV card i dont know please tell me the any tutorials or any code script etc.
plzzzzzzzzzzz help me.
My FMLE get the input from tv card and tv card device is show in device drop down list which is "713xBDA analog capture" it is all ok
but problem is that i don't how to flash script get the "input" and "record" from this device directly. or through FMLE.
which is possible
Get Input and record:
TV card --> FMLE -->flash player (flash scprit required)
TV card-->flash player (flash scprit required)

How can I run texts in flash media encoder 3.2 by the image

I have a question.
how can I run texts in flash media encoder 3.2 by the image
I do not get it done.
patrick

Hi MarcSaphiron,
Could you please send the samples?It will be much helpful to complete my
job within the deadline.
Thanks in advance.
Regards,
Sasharyuva

Problem when streaming with the CLI flash media encoder 2.5

I have a problem when streaming with Flash Media Encoder 2.5. When I run the GUI, everything works, but when I use the commandline with the same profile I have created using the GUI, it says it can't connect to the server.
I have to use this version of the encoder, because the other is not working with the server, and I have to create a program to remotely control the flash media encoder, so I have to use the CLI. What can i do to go over this problem?
Any help would be really appreciated. Thankyou.

First of all, thankyou.
There is no authentication needed. I can't use Flash Live Media Encoder 3 because it is not supported by the people which manages the server i have to connect to.
In fact, I don't know why they dont support it, but that is the way it is.
Through the GUI, i connect directly and without problems, without user/pass.
Thankyou again.

Adobe flash media encoder compatibility with the lion mac mini server

Can anyone tell me if the adobe flash media encoder is compatible with the lion mac mini server?

I am running adobe live flash encoder on a new mac-mini server with Lion and am able to stream video just fine - however I get a hum in the audio. I am not sure whether the hum is caused by the audio input, the camcorder, the adobe encoder, or the combination, but it seems to be the camcorder's fault.
There is a manual about migrating or upgrading to lion server, but none about instituting a new capability from scratch

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.

I cannot import .mov files to Premiere Pro or Adobe Media Encoder.
How do I around this problem?

We need to know a lot more if we're going to help you.
What happens when you try? Do you get an error message? If so, exactly what does it say?
What version of Premiere Pro? Have you installed the recent updates? What operating system?
Does this happen for all .mov files or just some? Has this ever worked before? What version of QuickTime do you have installed?
Here's a page written for After Effects, but the information is relevant to Premiere Pro and AME, too:
http://blogs.adobe.com/toddkopriva/2011/02/troubleshooting-quicktime-errors-with-after-eff ects.html

I cannot use the scroll, cannot change tabs, autocomplete for the URLs does not work

cannot use scroll, cannot change tabs, cannot use autocomplete in the URL tab. this was working
== This happened ==
A few times a week

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Cannot change the FPS of the Camera in Flash Media Encoder 3

Similar Messages

Maybe you are looking for