Cannot compile a prog in C++ using Sun WS 5.0 on Solaris 8
I am getting errors while compiling a helloworld program in C++ using Sun Workshop 5.0 on Solaris 8. The error messages are given below.
The command I use for compiling my program is :
CC Hello.cpp
Is there anything wrong with the installation of the compiler?
(All my C is code is compiling perfectly)
Do I need to make some settings?
Is the Sun compiler 5.0 incompatible with Solaris 8?
In addition to this, if I want to use the list and vector classes, what headers can I use? What should the compilation command be?
Thanks,
Puneet Singhal
I am getting these error messages:
"/usr/include/iso/wchar_iso.h", line 100: Error: Multiple declaration for mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/./iosfwd", line 51: Error: The name mbstate_t is ambiguous, std::mb
state_t and std::mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/./iosfwd", line 78: Error: The name mbstate_t is ambiguous, std::mb
state_t and std::mbstate_t.
"/opt/SUNWspro/SC5.0/include/CC/rw/iotraits", line 56: Error: The name mbstate_t is ambiguous, std:
:mbstate_t and std::mbstate_t.
4 Error(s) detected.
The program listing of Hello.cpp:
----------------------------------------------------#include<iostream.h>
int main()
cout << "Hello World";
return 0;
I've been able to compile this program fine on Solaris 8 with Forte Developer 6 Update 2. The exact version+patches is: CC: Sun WorkShop 6 update 2 C++ 5.3 Patch 111685-04 2001/12/13
I've also compiled with Workshop 5.0, and the code works fine. This is on Solaris 8 with the following compiler version+patches:
CC: WorkShop Compilers 5.0 01/12/04 C++ 5.0 Patch 107311-16
Let me know if you have any questions.
-Moazam
Similar Messages
-
I reinstalled win2k and since then I cant get my javac prompt to work
The error is :
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
But I can find the java.exe
jar tools, etc.
Is there some version problems associated with this;
I am actually tring to run a compile script
as below:
COMPILE SCRIPT
rmdir/s/q K:\MyProjects\class\com
pause
javac -classpath K:\MyProjects\class;%JAVAC_CLASSPATH%%J2EE_CLASSPATH% -d K:\MyProjects\class @Compiler.txt
pause
This script was working normally before I reinstalled Win2k.
My CLASSPATH , PATH are below and my jdk is installed in K:\jdk1.3.0_02
SystemRoot = K:\WINNT
JAVAC_CLASSPATH:
%JAVA_HOME%\bin;%JAVA_HOME%\lib;%JAVA_HOME%\lib\tools.jar;%JAVA_HOME%\lib\dt.jar;
CLASSPATH
%SystemRoot%;%SystemRoot%\system32;%SystemRoot%\system32\cmd.exe;JAVAC_CLASSPATH% %J2EE_CLASSPATH%%JRE_HOME%; %MY_PROJECT%\SQLConstant.txt;
PATH
%SystemRoot%\system32;%SystemRoot%\system32\WBEM;%JAVAC_CLASSPATH%;%J2EE_CLASSPATH%;K:\Oracle\bin;K:\Program Files\Oracle\jre\1.1.7\bin;C:\Inprise\AppServer\bin;K:\Program Files\Sybase\SQL Anywhere 7\win32;K:\Program Files\Sybase\Shared\win32;K:\Program Files\Sybase\Shared\Sybase Central 4.0\java;K:\Program Files\Microsoft SQL Server\80\Tools\BINN;K:\Program Files\Sybase\EAServer4.0\java\lib\easclient.jar;K:\Program Files\Sybase\EAServer4.0\java\lib\easserver.jar;K:\Program Files\Sybase\EAServer4.0\java\lib\easj2ee.jar;K:\BorlandEnterpriseServer\bin;K:\WebSphere\AppServer\bin;K:\Program Files\IBM\MQSeries\bin;K:\Program Files\IBM\MQSeries\Java\Lib;K:\Program Files\IBM\WebSphere MQ Publish and Subscribe\bin
I cant notice any difference between the old classpath settings.
Could somebody help me out in this issue
Thanks
manojHi Manoj,
I had the same problem.
This is what worked for me:
I'm running Win2k.
So, in C:\WINNT\system32 I found the following files
javac.exe
javaw.exe
java.exe
I removed them all, since I have the jdk pointed in the right classpath in my environment variables.
Once this was deleted. It worked fine!
I hope this helps. -
Problems Compiling Code With Function Pointers Using Sun CC (SUNWspro)
I have a header file that contains a declaration to a function pointer as follows:
int (*pFuncPntr)(char host, char comm, void *data);
Then, in a *.c file which includes the header file where the function pointer is declared, the prototype for the function is at the top of the file and appears as follows:
int someFunc(char hostname, char community, void *data);
Then, in the same *.c file, down below, I attempt to assign the function pointer to the address of the function declared as follows:
pFuncPntr = &someFunc;
... and further down in the *.c file is the definition of someFunc. ........................
When I compile, I get the following error:
: identifier redeclared: pFuncPntr
current : int
previous: pointer to function(pointer to char, pointer to char, pointer
to void) returning int : "/vobs/pp2dev/src/cmds/emcp_pmgmtd/sparc_solaris/../emc
p_pmgmtd.h", line 84
"/vobs/pp2dev/src/cmds/emcp_pmgmtd/sparc_solaris/emcp_pmgmtd_solaris.c", line 46
As far as I've read, this is the standard way of assigning a function pointer to the address of a function.
Does anyone have any ideas what CC compiler is complaining about?
Appreciate your response,
dedham_ma_manWHen I try to include the ftp.jar package?? I use "package com.enterprisedt.net.ftp;".That isn't how you import a package. That declares that the class it is at the top of will belong to that package, and that's not what you want. I'm guessing that you need
import com.enterprisedt.net.ftp.*;
at the top of your code, just after the line where you declare the real name of the package your class is going to belong to.
By the way, you need the compiled version of your downloaded FTP code, i.e. the .class files. If you got source code (.java files) you'll need to compile them, but you should be able to get the compiled version as a download. -
Using Sun Traffic manager in SC
Dear Gurus
Is there any specfic requirement using Sun traffic Manager in Sun cluster
i am using Sun cluster 3.1 on Solaris 9
RegardI'm not sure which meaning of 'specific' you're implying here. You could interpret the question as:
A. Do I have to run Sun traffic manager with Sun Cluster?
Answer: yes, if you have multiple paths to the same storage, otherwise it is superfluous.
B. Does Sun traffic manager depend on other s/w to run with Sun Cluster?
Answer: no, just Solaris and relevant patches.
C. Can I use something other that Sun traffic manager with Sun Cluster?
Answer: yes, with EMC you can use PowerPath and with HDS you can use HDLM (?), but you can't use VxDMP.
Hope that helps,
Tim
--- -
Error when trying to build using sun studio compiler
Hi ,
When i try to build my appliation-1 and application-2 , I am experiencing below given errors
OS:
SUSE Linux Enterprise Server 10 (x86_64)
VERSION = 10
PATCHLEVEL = 1
Compiler Version:
cc: Sun Ceres C 5.10 Linux_i386 2008/03/24
usage: cc [ options] files. Use 'cc -flags' for details
Application1:
Error:
CC: Cannot find /comp/sun/sunstudioceres/bin/ccfe
Application2:
Error:
cc: Warning: cannot open inline file /gan/q2/comp/sun/sunstudioceres/lib/amd64/libm.il
cc: Can't exec /comp/sun/sunstudioceres/bin/acomp
Please share your thoughts on how to solve this problem
Regards,[http://forum.java.sun.com/thread.jspa?threadID=5307985]
-
Compilation error on Solaris 2.6 using SUn Workshop 4.2(Rogue wave STL)
Hello,
I am facing a problem while using Rogue wave STLs on SOlaris 2.6 using Sun WOrkshop pro 4.2
I am using Hash table implementation in the source. It throws the following error:
---->Error: "," expected instead of "const_iterator".
I found it to be problem in a declaration of pair for the class.
Before modification:
typedef pair<mytmp::iterator,int> interator;
Modified to:
typedef mytmp::iterator myitr
typedef pair<myitr,int> interator;
Now the above compilation error seems to be gone. Can anyone please help me in understanding this problem???????????????
Also after compiling few files now i am facing new problem. It throws signal 11 in iterator header file of std STL.
Help m e !!!!!!!!!!
For your reference options of compilation are:
/opt/SUNWspro/bin/CC -c -O -mt -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199506L -D_REENTRANT -D__EXTENSION
S__ -DRWSTD_MULTI_THREAD -D_RWBUILDSHARED -DRWSTD_COMPILE_INSTANTIATE -
DRWSTD_SHARED_BUILD --I/opt/mylib/common/include/Std mydemo.ccI solved my own problem.
It seems that the C++ XML Parser cannot be used with earlier versions of Oracle. My ORACLE_HOME env variable was pointing to v734. Once I changed that to point to the later version of v816, It was a smooth parse.
null -
How to generate gdb compatible .o for CMT using Sun Studio C compiler?
Hello,
we've been working on a joint project for telco bearer plane applications on CMT.
We started the project using gcc for Sparc and we switched to Sun Studio compiler when we hit some bugs in gcc (optimized mode was not completely stable). The switch took a few weeks due to syntax differences and toolchain option changes.
With Sun Studio we got a double digit percent performance improvement, so Sun Studio proved more stable and faster than gcc.
To debug programs we require gdb, because the Telco customers are more familiar with it. The problem is that Sun Studio generates object files which are not compatible with gdb.
Our main requirement is to be able to generate gdb compatible object files using Sun Studio compiler.
We checked this link:
http://cooltools.sunsource.net/gcc/ReleaseNotes.html
but this seems to be a variant of gcc. At this point we cannot switch compiler because of the performance and stability issues mentioned above and because it will take a few weeks to months to switch.
We have two questions:
1) Is there a way to generate gdb compatible object files using Sun Studio 11?
2) If not, is this funcionality going to be available in a future release of Sun Studio and what is the time frame?
Thanks for your help.
Marco Zandonadi
Teja TechnologiesThe undefined symbol is in the C++ runtime support library that is part of Solaris. Probably you have an out-fo-date version of the libraries.
You can get current patches from the Sun Studio patch page:
http://developers.sun.com/prodtech/cc/downloads/patches/index.html
From the page for your version of WorkShop or Sun Studio, select the C++ Runtime Library patch for the version of Solaris that your are running. While you are at it, you can get the current compiler patches as well.
If patching the runtime libraries does not fix the problem, let me know, and also show the exact command lines that you use for compiling and linking the program. -
Error in compiling boost example program using sun studio 12
I am trying to compile the below example program from boost using sun studio 12 C++ compiler.
#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <cstring>
#include <cstdlib>
#include <string>
int main(int argc, char *argv[])
using namespace boost::interprocess;
if(argc == 1)
{ //Parent process
//Remove shared memory on construction and destruction
struct shm_remove
shm_remove() { shared_memory_object::remove("MySharedMemory"); }
~shm_remove(){ shared_memory_object::remove("MySharedMemory"); }
} remover;
//Create a shared memory object.
shared_memory_object shm (create_only, "MySharedMemory", read_write);
//Set size
shm.truncate(1000);
//Map the whole shared memory in this process
mapped_region region(shm, read_write);
//Write all the memory to 1
std::memset(region.get_address(), 1, region.get_size());
//Launch child process
std::string s(argv[0]); s += " child ";
if(0 != std::system(s.c_str()))
return 1;
else
//Open already created shared memory object.
shared_memory_object shm (open_only, "MySharedMemory", read_only);
//Map the whole shared memory in this process
mapped_region region(shm, read_only);
//Check that memory was initialized to 1
char mem = static_cast<char>(region.get_address());
for(std::size_t i = 0; i < region.get_size(); ++i)
if(*mem++ != 1)
return 1; //Error checking memory
return 0;
Using the below command :
CC -c 1.cpp -I/home/syogacha/satish/boost_1_43_0 -library=stlport4
"/home/syogacha/satish/boost_1_43_0/boost/interprocess/shared_memory_object.hpp", line 284: Error: The function "shm_open" must have a prototype.
"/home/syogacha/satish/boost_1_43_0/boost/interprocess/shared_memory_object.hpp", line 307: Error: The function "shm_unlink" must have a prototype.
"/home/syogacha/satish/boost_1_43_0/boost/interprocess/mapped_region.hpp", line 549: Error: Formal argument 1 of type char* in call to shmdt(char*) is being passed void*.
3 Error(s) detected.
I even tried to include sys/mman.h but got the same compilation errors.
Do we need to take care of few other specific things while using boost headers.
Thanks in advance ...Hope this helps....
#include <sys/mman.h>
#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <cstring>
#include <cstdlib>
#include <string>
#include <iostream>
#include <iterator>
int main(int argc, char *argv[])
{ //main
using namespace boost::interprocess;
if(argc == 1)
{ //Parent process
//Remove shared memory on construction and destruction
struct shm_remove
shm_remove() { shared_memory_object::remove("MySharedMemory"); }
~shm_remove(){ shared_memory_object::remove("MySharedMemory"); }
} remover;
//Create a shared memory object.
shared_memory_object shm (create_only, "MySharedMemory", read_write);
//Set size
shm.truncate(1000);
//Map the whole shared memory in this process
mapped_region region(shm, read_write);
//Write all the memory to 1
std::memset(region.get_address(), 1, region.get_size());
//Launch child process
std::string s(argv[0]); s += " child ";
if(0 != std::system(s.c_str()))
return 1;
else
//Open already created shared memory object.
shared_memory_object shm (open_only, "MySharedMemory", read_only);
//Map the whole shared memory in this process
mapped_region region(shm, read_only);
//Check that memory was initialized to 1
char *mem = static_cast<char*>(region.get_address());
for(std::size_t i = 0; i < region.get_size(); ++i)
if(*mem++ != 1)
return 1; //Error checking memory
return 0;
} -
Compiling C++ using Sun Studio 11
Hi,
I have downloaded and installed "IBM Message Service client for C/C++" (in Solaris 5.8) to publish messages to Websphere MQ Topics using C++ programs. The IBM installation comes with a compiled version of the sample programs and I am able to execute them successfully using Sun studio 11's C++ compiler. But when I try to compile these sample programs , it throws the following exception.
mqm$ CC SampleConsumerCPP.cpp
"SampleConsumerCPP.cpp", line 36: Error: Could not open include file<xms.hpp>.
"SampleConsumerCPP.hpp", line 39: Error: Could not open include file<helperfunctions.h>.
"SampleConsumerCPP.hpp", line 52: Error: xmsVOID is not defined.
"SampleMsgListener.hpp", line 44: Error: xms is not defined.
"SampleMsgListener.hpp", line 44: Error: MessageListener is not defined.
"SampleMsgListener.hpp", line 55: Error: Type name expected instead of "xmsVOID".
"SampleMsgListener.hpp", line 55: Error: "virtual" is not allowed here.
"SampleMsgListener.hpp", line 55: Error: Identifier expected instead of "const".
"SampleMsgListener.hpp", line 55: Error: Use ";" to terminate declarations.
"SampleMsgListener.hpp", line 56: Error: Use ";" to terminate declarations.
"SampleMsgListener.hpp", line 56: Error: "," expected instead of "displayMsg".
"SampleMsgListener.hpp", line 62: Error: Use ";" to terminate declarations.
"SampleMsgListener.hpp", line 62: Error: Type name expected instead of "xmsVOID".
"SampleMsgListener.hpp", line 63: Error: Type name expected instead of "xmsINT".
"SampleMsgListener.hpp", line 63: Error: Identifier expected instead of "const".
"SampleMsgListener.hpp", line 63: Error: Multiple declaration for const.
"SampleMsgListener.hpp", line 63: Error: Use ";" to terminate declarations.
"SampleMsgListener.hpp", line 64: Error: Use ";" to terminate declarations.
"SampleMsgListener.hpp", line 64: Error: Type name expected instead of "xmsVOID".
"SampleMsgListener.hpp", line 65: Error: Type name expected instead of "xmsINT".
"SampleMsgListener.hpp", line 65: Error: Identifier expected instead of "const".
"SampleMsgListener.hpp", line 65: Error: Multiple declaration for const.
"SampleMsgListener.hpp", line 65: Error: Use ";" to terminate declarations.
"SampleMsgListener.hpp", line 67: Error: Use ";" to terminate declarations.
"SampleMsgListener.hpp", line 73: Error: Type name expected instead of "xmsINT".
Compilation aborted, too many Error messages.
The compiler does not recognize the "make" command either.
Find below my PATH settings.
"/tools/java/j2sdk1.4.2_08/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/sbin:/data/sunstudio10/SUNWspro/bin:/opt/mqm/java/bin:/usr/openwin/bin:/data/mqapi/tools/cpp/include:/data/mqapi/tools/samples/common:/data/mqapi/lib"
where /data/mqapi contains the XMS installation.
Any pointers to solve this issue will be highly appreciated.
Thanks,
MeeraaHi,
I have downloaded and installed "IBM Message Service
client for C/C++" (in Solaris 5.8) ...
mqm$ CC SampleConsumerCPP.cpp
"SampleConsumerCPP.cpp", line 36: Error: Could not
open include file<xms.hpp>.You probably don't want to be running CC on its own.
The compiler does not recognize the "make" command
either.
Find below my PATH settings.
"/tools/java/j2sdk1.4.2_08/bin:/usr/bin:/bin:/usr/sbin
:/sbin:/usr/local/bin:/usr/local/sbin:/data/sunstudio1
0/SUNWspro/bin:/opt/mqm/java/bin:/usr/openwin/bin:/dat
a/mqapi/tools/cpp/include:/data/mqapi/tools/samples/co
mmon:/data/mqapi/lib"
where /data/mqapi contains the XMS installation.You need to set your path in your shell. Make sure that /usr/ccs/bin is in your PATH.
Have you really installed Studio 11 in "/data/sunstudio10" - that looks a bit confuding to me!
Paul -
Cannot Compile when using FileInputStream
I am trying to read data from a file...
I cannot compile this and I have tried importing all of the java.io.* classes and it still does not compile.
Help!
I have the following imports:
import net.rim.device.api.ui.*;
import net.rim.device.api.system.Application;
import javax.microedition.io.*;
import javax.microedition.io.file.*;
import java.io.*;
import net.rim.device.api.ui.component.*;
import net.rim.device.api.ui.container.*;
import net.rim.device.api.system.Bitmap;
import net.rim.device.api.system.*;
import JavaProjects.JDE42.EmergInfo.Resource.*;
import net.rim.device.api.i18n.*;
And the code snippet:
private void ReadDataFile()
try {
FileInputStream fstream = new FileInputStream(_resources.getString(EmergInfoResResource.DWI_DATAFILE));
DataInputStream in = new DataInputStream(fstream);
BufferedReader br = new BufferedReader(new InputStreamReader(in));
String strLine;
//Read File Line By Line
while ((strLine = br.readLine()) != null) {
// Print the content on the console
System.out.println (strLine);
//Close the input stream
in.close();
}catch (Exception e){//Catch exception if any
System.err.println("Error: " + e.getMessage());
On compile, I get the following errors:
Building EmergInfo_DWI
C:\Program Files\Research In Motion\BlackBerry JDE 5.0.0\bin\rapc.exe -quiet codename=EmergInfo_DWI EmergInfo_DWI.rapc warnkey=0x52424200;0x52525400;0x52435200 import="C:\Program Files\Research In Motion\BlackBerry JDE 5.0.0\lib\net_rim_api.jar" D:\JavaProjects\JDE42\EmergInfo\img\DWI_Main.jpg D:\JavaProjects\JDE42\EmergInfo\img\DWI_Main_bw.jpg D:\JavaProjects\JDE42\EmergInfo\Resource\EmergInfoRes.rrc D:\JavaProjects\JDE42\EmergInfo\Resource\EmergInfoRes.rrh D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main_Screen.java
D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java:68: cannot find symbol
symbol : class FileInputStream
location: class Source.DWI_Main
FileInputStream fstream = new FileInputStream(_resources.getString(EmergInfoResResource.DWI_DATAFILE));
^
D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java:68: cannot find symbol
symbol : class FileInputStream
location: class Source.DWI_Main
FileInputStream fstream = new FileInputStream(_resources.getString(EmergInfoResResource.DWI_DATAFILE));
^
D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java:72: cannot find symbol
symbol : class BufferedReader
location: class Source.DWI_Main
BufferedReader br = new BufferedReader(new InputStreamReader(in));
^
D:\JavaProjects\JDE42\EmergInfo\Source\DWI_Main.java:72: cannot find symbol
symbol : class BufferedReader
location: class Source.DWI_Main
BufferedReader br = new BufferedReader(new InputStreamReader(in));
^
4 errorsWhat I have installed:
Blackberry JDE 4.2.0
Blackberry JDE 5.0.0
Java DB 10.5.3.0
Java SE Development Kit Update 22
Java Platform, Enterprise Edition 5 SDK
Seems I do not have the ME stuff installed...
Edited by: 802969 on Oct 16, 2010 2:07 PM -
PLS-00304: cannot compile body of package without its specification
Hi all,
While compiling the below pasted package , I got the following error msg.
PL/SQL: Compilation unit analysis terminated
PLS-00304: cannot compile body of 'EDR_RPT_CLASS_BY_TAWT_PACKAGE'
without its specification
PLS-00905: object HDOT.EDR_RPT_CLASS_BY_TAWT_PACKAGE is invalidBut I believe that have declared package and ppackage body specification correctly. Please could anyone help me to find out the error
CREATE OR REPLACE PACKAGE edr_rpt_class_by_tawt_package AS
PROCEDURE edr_rpt_gen_class_by_tawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
PROCEDURE edr_rpt_gen_class_by_fawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
PROCEDURE edr_rpt_gen_class_by_sawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
PROCEDURE edr_rpt_gen_class_by_triawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
PROCEDURE edr_rpt_gen_class_by_qawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
FUNCTION class_count
in_lane_id edr_rpt_by_ranges_output.lane_id%TYPE,
in_direction_id edr_rpt_by_ranges_output.direction_id%TYPE,
in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_interval_end_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_axle_wt_min edr_cls_by_tawt_report_data.group_weight%TYPE,
iin_axle_wt_max edr_cls_by_tawt_report_data.group_weight%TYPE,
in_class_min edr_cls_by_tawt_report_data.vehicle_class%TYPE,
in_class_max edr_cls_by_tawt_report_data.vehicle_class%TYPE
RETURN VARCHAR2;
END edr_rpt_class_by_tawt_package;
CREATE OR REPLACE PACKAGE BODY edr_rpt_class_by_tawt_package AS
c_front_axle_only CONSTANT axle_class.group_type%TYPE := -1;
c_axle_single_group_type CONSTANT axle_class.group_type%TYPE := 1;
c_axle_tandem_group_type CONSTANT axle_class.group_type%TYPE := 2;
c_axle_tridem_group_type CONSTANT axle_class.group_type%TYPE := 3;
c_axle_quadrem_group_type CONSTANT axle_class.group_type%TYPE := 4;
c_kips_conversion_unit_id CONSTANT units.unit_id%TYPE := 8;
v_report_axle_group_type axle_class.group_type%TYPE := 0;
FUNCTION class_count
in_lane_id edr_rpt_by_ranges_output.lane_id%TYPE,
in_direction_id edr_rpt_by_ranges_output.direction_id%TYPE,
in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_interval_end_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_axle_wt_min edr_cls_by_tawt_report_data.group_weight%TYPE,
in_axle_wt_max edr_cls_by_tawt_report_data.group_weight%TYPE,
in_class_min edr_cls_by_tawt_report_data.vehicle_class%TYPE,
in_class_max edr_cls_by_tawt_report_data.vehicle_class%TYPE
RETURN NUMBER
IS
my_count_result NUMBER(18);
BEGIN
SELECT NVL(SUM(vehicle_count), 0 )
INTO my_count_result
FROM
SELECT site_lane_id
FROM edr_rpt_tmp_report_lanes
WHERE edr_rpt_tmp_report_lanes.output_lane_id = in_lane_id
AND edr_rpt_tmp_report_lanes.output_direction_id = in_direction_id
) report_lanes
JOIN edr_cls_by_tawt_report_data
ON edr_cls_by_tawt_report_data.site_lane_id = report_lanes.site_lane_id
WHERE edr_cls_by_tawt_report_data.bin_start_date_time >= in_interval_start_date_time
AND edr_cls_by_tawt_report_data.bin_start_date_time < in_interval_end_date_time
AND edr_cls_by_tawt_report_data.group_weight >= in_axle_wt_min
AND edr_cls_by_tawt_report_data.group_weight < in_axle_wt_max
AND edr_cls_by_tawt_report_data.vehicle_class >= in_class_min
AND edr_cls_by_tawt_report_data.vehicle_class <= in_class_max
RETURN my_count_result;
END;
FUNCTION get_row_class_counts_text
RETURN VARCHAR2
IS
my_row_counts_text VARCHAR2(10000);
my_row_counts_entry VARCHAR2(10000);
CURSOR row_counts_text IS
SELECT 'edr_rpt_class_by_tawt_package.class_count('
||'lane_id, '
||'direction_id, '
||'interval_start_date_time, '
||'interval_end_date_time, '
||'range_low, '
||'range_high, '
|| class_id || ', '
|| class_id || ') "'|| class_id || '"'
FROM edr_rpt_tmp_report_classes
ORDER BY class_id;
BEGIN
my_row_counts_text := '';
my_row_counts_entry := '';
-- generate the speed ranges function calls
OPEN row_counts_text;
LOOP
FETCH row_counts_text INTO my_row_counts_entry;
EXIT WHEN row_counts_text%NOTFOUND;
my_row_counts_text := my_row_counts_text || ', ' || my_row_counts_entry;
END LOOP;
CLOSE row_counts_text;
RETURN my_row_counts_text;
END;
FUNCTION get_row_totals_text
RETURN VARCHAR2
IS
my_row_count_total_text VARCHAR2(10000);
BEGIN
my_row_count_total_text := '';
-- generate the 'total' column function call
SELECT 'edr_rpt_class_by_tawt_package.class_count('
||'lane_id, '
||'direction_id, '
||'interval_start_date_time, '
||'interval_end_date_time, '
||'range_low, '
||'range_high, '
|| MIN(class_id) || ', '
|| MAX(class_id) || ') " "'
INTO my_row_count_total_text
FROM edr_rpt_tmp_report_classes;
RETURN ', ' || my_row_count_total_text;
END;
PROCEDURE apply_default_awt_ranges(in_report_parameter_id IN NUMBER)
IS
my_awt_ranges_count NUMBER(4);
BEGIN
SELECT nvl(count(1),0)
INTO my_awt_ranges_count
FROM report_range_parameters
WHERE REPORT_PARAMETER_ID = in_report_parameter_id
AND REPORT_PARAMETER_GROUP = 'AXLE_GROUP'
AND REPORT_PARAMETER_NAME = 'AXLE_NAME';
IF ( my_awt_ranges_count = 0 )
THEN
INSERT INTO report_range_parameters (REPORT_PARAMETER_ID, REPORT_PARAMETER_GROUP, REPORT_PARAMETER_NAME, REPORT_PARAMETER_MIN_VALUE, REPORT_PARAMETER_MAX_VALUE)
VALUES (in_report_parameter_id, 'AXLE_GROUP', 'AXLE_NAME', '0', '2');
VALUES (in_report_parameter_id, 'AXLE_GROUP', 'AXLE_NAME', '30', '32');
END IF;
END;
PROCEDURE edr_class_by_tawt_use_per_veh
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
in_good_status_mask IN NUMBER
IS
max_axle_group_value NUMBER(12);
BEGIN
DELETE FROM edr_cls_by_tawt_report_data;
COMMIT;
INSERT INTO edr_cls_by_tawt_report_data
site_id,
site_lane_id,
site_direction_id,
site_direction_name,
bin_start_date_time,
group_weight,
bin_id,
bin_value
SELECT site_id,
site_lane_id,
site_direction_id,
site_direction_name,
date_time,
group_weight,
vehicle_class,
COUNT(vehicle_class)
FROM
SELECT edr_cls_by_tawt_per_veh_data.*
FROM edr_cls_by_tawt_per_veh_data
GROUP BY date_time,
site_lane_id,
group_weight,
vehicle_class,
site_id,
site_direction_id,
site_direction_name;
END edr_class_by_tawt_use_per_veh;
PROCEDURE edr_class_by_tawt_data_type
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
in_good_status_mask IN NUMBER,
in_data_type IN VARCHAR2,
out_data_type_used OUT VARCHAR2
IS
my_bin_entry_count NUMBER(12,0);
my_veh_entry_count NUMBER(12,0);
BEGIN
IF(UPPER(in_data_type) = 'BINNED') THEN
-- Axle information can only be read from Per Vehicle data records
-- - using bins-only is not a supported option
RAISE_APPLICATION_ERROR(-20101,'Binned data cannot be used for this report.');
ELSIF (UPPER(in_data_type) = 'PERVEHICLE')
OR (UPPER(in_data_type) = 'COMBINED')
THEN
out_data_type_used := 'Per Vehicle (All Vehicles)';
edr_class_by_tawt_use_per_veh( in_report_parameter_id, in_good_status_mask );
ELSE
RAISE_APPLICATION_ERROR(-20101,'The data type specified is not recognized.');
END IF;
END edr_class_by_tawt_data_type;
PROCEDURE edr_class_by_tawt_get_veh_data
in_report_parameter_id IN NUMBER,
in_site_id IN NUMBER,
in_start_date_time IN TIMESTAMP,
in_end_date_time IN TIMESTAMP,
in_report_level_min IN NUMBER,
in_report_level_max IN NUMBER
IS
BEGIN
DELETE FROM edr_cls_by_tawt_per_veh_data;
INSERT INTO edr_cls_by_tawt_per_veh_data
site_id,
site_lane_id,
site_direction_id,
site_direction_name,
record_id,
date_time,
group_weight,
vehicle_class,
group_number,
vehicle_status,
vehicle_error_count,
axle_violations_count,
group_type
SELECT axle_info.site_id,
axle_info.site_lane_id,
axle_info.site_direction_id,
axle_info.site_direction_name,
axle_info.record_id,
axle_info.datetime,
axle_info.group_weight,
axle_info.v_class,
axle_info.group_number,
NVL((SELECT SUM(status_code)
FROM traffic_status
WHERE traffic_status.record_id = axle_info.record_id), 0) vehicle_status,
NVL((SELECT COUNT(error_code)
FROM traffic_error
WHERE traffic_error.record_id = axle_info.record_id), 0) vehicle_error_count,
NVL((SELECT COUNT(1)
FROM axle_weight_violation
WHERE axle_weight_violation.record_id = axle_info.record_id), 0) axle_violations_count,
axle_info.group_type
FROM (SELECT site_to_data_source_lane_v.site_id,
site_to_data_source_lane_v.site_lane_id,
site_to_data_source_lane_v.site_direction_id,
site_to_data_source_lane_v.site_direction_name,
traffic_record.record_id,
traffic_record.datetime,
NVL(traffic_class.v_class, 0) v_class,
NVL(axle_class.group_type, 0) group_type,
NVL(axle_class.group_number, 0) group_number,
NVL(TRUNC(sum(convert_units(axle.weight_unit_id,
c_kips_conversion_unit_id,
axle.axle_weight
0
) group_weight
FROM traffic_record
JOIN site_to_data_source_lane_v
ON traffic_record.data_source_id = site_to_data_source_lane_v.data_source_id
AND traffic_record.lane = site_to_data_source_lane_v.data_source_lane_id
GROUP BY site_to_data_source_lane_v.site_id,
site_to_data_source_lane_v.site_lane_id,
site_to_data_source_lane_v.site_direction_id,
site_to_data_source_lane_v.site_direction_name,
traffic_record.record_id,
traffic_record.datetime,
traffic_class.v_class,
axle_class.group_type,
axle_class.group_number
) axle_info
END edr_class_by_tawt_get_veh_data;
PROCEDURE gen_class_by_axle_type
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
AS
BEGIN
apply_default_awt_ranges(in_report_parameter_id);
my_date_format_mask := edr_rpt_generic_package.edr_rpt_get_date_format_mask(in_report_parameter_id);
my_start_date_time := edr_rpt_generic_package.edr_rpt_get_start_date_time(in_report_parameter_id, my_date_format_mask);
my_end_date_time := edr_rpt_generic_package.edr_rpt_get_end_date_time(in_report_parameter_id, my_date_format_mask);
my_lane_grouping := edr_rpt_generic_package.edr_rpt_get_lane_grouping(in_report_parameter_id);
my_site_id := edr_rpt_generic_package.edr_rpt_get_site_id(in_report_parameter_id);
my_selected_data_type := edr_rpt_generic_package.edr_rpt_get_data_type(in_report_parameter_id);
-- ensure selected classes and lanes temp tables have been populated
edr_rpt_generic_package.edr_rpt_gen_tmp_lanes(in_report_parameter_id);
edr_rpt_generic_package.edr_rpt_gen_tmp_classes(in_report_parameter_id);
edr_rpt_generic_package.edr_rpt_gen_tmp_speed_ranges(in_report_parameter_id);
my_good_weight_statuses_mask := edr_rpt_generic_package.get_good_weight_status_mask(in_report_parameter_id);
edr_rpt_generic_package.edr_rpt_gen_inclusion_table
in_report_parameter_id,
my_date_format_mask,
my_start_date_time,
my_end_date_time
edr_rpt_generic_package.edr_rpt_gen_grouping_table
in_report_parameter_id,
my_date_format_mask,
my_start_date_time,
my_end_date_time
edr_class_by_tawt_get_veh_data
in_report_parameter_id,
my_site_id,
my_start_date_time,
my_end_date_time,
0, --Hardcoded until reclassification is supported.
0 --Hardcoded until reclassification is supported.
edr_class_by_tawt_data_type
in_report_parameter_id,
my_good_weight_statuses_mask,
my_selected_data_type,
my_used_data_type
edr_rpt_generic_package.gen_rpt_by_ranges_output_table
in_report_parameter_id,
'AXLE_GROUP',
'AXLE_NAME'
COMMIT;
my_report_data_statement :=
' SELECT rank "Rank", '
|| ' row_type "Row Type", '
|| ' interval_start_date_time "Date", '
|| ' interval_start_date_time, '
|| ' range_label "Chart X-Axis", '
|| ' lane_id "Group Id" , '
|| ' ''None'' "Group Name", '
|| ' range_label "Speed (mph)" '
|| get_row_class_counts_text
|| get_row_totals_text
|| ' FROM edr_rpt_by_ranges_output '
|| ' ORDER BY lane_id, '
|| ' direction_id, '
|| ' interval_start_date_time, '
|| ' range_high, '
|| ' rank, '
|| ' range_low'
dbms_output.put_line('SQL start------------------------');
dbms_output.put_line(my_report_data_statement);
dbms_output.put_line('SQL end--------------------------');
my_chart_data_statement :=
' SELECT range_low "X Axis", '
|| ' lane_id "Group" '
|| get_row_class_counts_text
|| ' FROM '
|| ' ( '
|| ' SELECT lane_id, '
|| ' direction_id, '
|| ' range_low, '
|| ' range_high, '
|| ' min(interval_start_date_time) interval_start_date_time, '
|| ' max(interval_end_date_time) interval_end_date_time '
|| ' FROM edr_rpt_by_ranges_output '
|| ' WHERE rank = 1 '
|| ' GROUP BY lane_id, direction_id, range_low, range_high '
|| ' ) '
|| ' order by "Group", range_low '
dbms_output.put_line('SQL start------------------------');
dbms_output.put_line(my_chart_data_statement);
dbms_output.put_line('SQL end--------------------------');
SELECT my_used_data_type
INTO my_data_type_used
FROM SYS.DUAL;
SELECT NVL(COUNT(DISTINCT record_id), 0)
INTO my_per_vehicle_total
FROM edr_cls_by_tawt_per_veh_data;
SELECT NVL(COUNT(DISTINCT record_id), 0)
INTO my_status_vehicle_total
FROM edr_cls_by_tawt_per_veh_data
WHERE vehicle_status > 0
AND vehicle_error_count = 0;
SELECT NVL(COUNT(DISTINCT record_id), 0)
INTO my_error_vehicle_total
FROM edr_cls_by_tawt_per_veh_data
WHERE vehicle_error_count > 0;
SELECT NVL(COUNT(DISTINCT record_id), 0)
INTO my_status_clear_total
FROM edr_cls_by_tawt_per_veh_data
WHERE vehicle_status = 0
AND vehicle_error_count = 0;
SELECT NVL(COUNT(1), 0)
INTO my_binned_vehicle_total
FROM edr_cls_by_tawt_per_veh_data;
SELECT NVL(COUNT(1), 0)
INTO my_good_weight_total
FROM edr_cls_by_tawt_per_veh_data
WHERE vehicle_error_count = 0
AND BITAND(vehicle_status, my_good_weight_statuses_mask) = 0;
-- insert vehicle totals into the temporary table
DELETE FROM edr_rpt_tmp_veh_totals_table;
INSERT INTO edr_rpt_tmp_veh_totals_table
SELECT my_data_type_used,
my_per_vehicle_total,
my_binned_vehicle_total,
my_error_vehicle_total,
my_status_vehicle_total,
my_good_weight_total,
my_status_clear_total
FROM SYS.DUAL;
-- execute the query into the output refcursor
OPEN report_data FOR
my_report_data_statement;
OPEN chart_data FOR
my_chart_data_statement;
OPEN footer_data FOR
SELECT data_type_used,
per_vehicle_total,
binned_vehicle_total,
error_vehicle_total,
status_vehicle_total,
good_weight_total,
status_clear_total
FROM edr_rpt_tmp_veh_totals_table;
END gen_class_by_axle_type;
PROCEDURE edr_rpt_gen_class_by_sawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_axle_single_group_type;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
PROCEDURE edr_rpt_gen_class_by_fawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_front_axle_only ;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
PROCEDURE edr_rpt_gen_class_by_tawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_axle_tandem_group_type;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
PROCEDURE edr_rpt_gen_class_by_triawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_axle_tridem_group_type;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
PROCEDURE edr_rpt_gen_class_by_qawt (
in_report_parameter_id IN report_tasks.report_task_id%TYPE,
report_data OUT SYS_REFCURSOR,
chart_data OUT SYS_REFCURSOR,
footer_data OUT SYS_REFCURSOR
AS
BEGIN
v_report_axle_group_type := c_axle_quadrem_group_type;
gen_class_by_axle_type(in_report_parameter_id, report_data, chart_data, footer_data);
END;
END edr_rpt_class_by_tawt_package;
LIST
SHOW ERRORHi,
PLS-00304: cannot compile body of 'EDR_RPT_CLASS_BY_TAWT_PACKAGE'
without its specificationThis error usually indicates an issue with used datatypes in a package spec. that differs from a package body.
Check your spec:
FUNCTION class_count
in_lane_id edr_rpt_by_ranges_output.lane_id%TYPE,
in_direction_id edr_rpt_by_ranges_output.direction_id%TYPE,
in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_interval_end_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_axle_wt_min edr_cls_by_tawt_report_data.group_weight%TYPE,
iin_axle_wt_max edr_cls_by_tawt_report_data.group_weight%TYPE,
in_class_min edr_cls_by_tawt_report_data.vehicle_class%TYPE,
in_class_max edr_cls_by_tawt_report_data.vehicle_class%TYPE
RETURN VARCHAR2; However in your package body:
FUNCTION class_count
in_lane_id edr_rpt_by_ranges_output.lane_id%TYPE,
in_direction_id edr_rpt_by_ranges_output.direction_id%TYPE,
in_interval_start_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_interval_end_date_time edr_rpt_by_ranges_output.interval_start_date_time%TYPE,
in_axle_wt_min edr_cls_by_tawt_report_data.group_weight%TYPE,
in_axle_wt_max edr_cls_by_tawt_report_data.group_weight%TYPE,
in_class_min edr_cls_by_tawt_report_data.vehicle_class%TYPE,
in_class_max edr_cls_by_tawt_report_data.vehicle_class%TYPE
RETURN NUMBERReturn number in spec. vs. return varchar2 in body..
That won't compile, either return a number or a varchar2 in both. (spec and body). -
Adobe v9 on W7 and office 2007. cannot create PDF from MS word using Adobe. But can from Excel, PPT and other MS office apps. Reinslalled Adobe, updated Office, and Adobe no help! Also I can create a pdf from the MS Word and it is using the Adobe 9. So one would think that's good. No it isn't when you need to combine different files to one big PDF document. Any suggetions? Thank you
Yes, I’m saying that I can in WORD use “Save As ADOBE pdf” but cannot in ADOBE create a pdf file from a WORD (.doc or .docx) document. While I can from other MS Office apps like Excel and PowerPoint.
I understand I can use “work around” and save doc in WORD as pdf then compile all files needed (xml, ppt, pdf) in the ADOBE v9. to one big pdf document. But that is not the point of this post.
Jarda @ PC+NET Solutions
Mobile 613-532-7023
Office 613-385-1268
<http://www.pcplusnet.net/> www.pcplusnet.net -
Use Sun Java Studio 2 with Existing Java Application
I have started using Sun Java Studio 2 and having fun and little difficulty creating a new Java web application from scatch. My question is where do I find information on Java Studio configuration to allow Java Studio to load up and modify Java server pages/forms in an existing Java application that I did not write?
The Java application has been created with Javabeans and using BEA Weblogic version 7, with a SQL-Server 2000 database backend.
Below is a bit of code out of one of the main Java forms.
<%@ page buffer="256kb" autoFlush="false" errorPage="../../common/system/error.jsp"
import="psdi.jsp.beans.*, psdi.jsp.common.*, psdi.jsp.app.wotrack.*, psdi.jsp.util.* , psdi.mbo.* , psdi.util.* "%>
I have looked around and have not found what I need to setup in Java Studio to allow me to load up a form and view it in the Visual designer, I keep getting errors on the psdi. references and cannot load up any pages.
I see on the server install ia folder under the main root <DIR> called <apps>, and inside the <apps> folder is a folder called <jsp> and in the <jsp> folder are sub folders for each main module within the application with all the related .jsp files. I have been manually editing the .jsp files using Windows Notpad and saving the changes. Then I rebuild the .ear file and my changes work fine. Since I have a lot of changes to make there has to be a better way than using Notpad.
My hope is somewhere is a point-by-point document on what to so I can use Sun Java Studio 2 to make my changes in a visual IDE.
Any assistance would really be appreciated.Hi Giri,
Yep, this I know,b ut when I do I get errors messages and am looking for some form of point-bypoint instuction that better explains how to setup up custom libraries in Sun Java Studio, custom tags, etc. -
Cannot Compile. Pls. help!
I cannot compile the following program which calls for another 6 class files from its code. Please note the main program (DiveLog.java)+the other 6 class files are stored in the same directory.
And also as this involves "package" I tried to compile it as "javac -classpath DiveLog.jav". But I still get the 'cannot resolve symbol' error messages.
DiveLog.java (Main Program)
package DiveLog;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class DiveLog
private JFrame dlframe; //Not assigned yet.
private JTabbedPane tabbedPane; //Not assigned yet.
//Begins Constructor
public DiveLog()
// Create a frame object to add the application GUI components to.
dlframe = new JFrame("A Java(TM) Technology Dive Log");
// Closes from title bar and from menu
dlframe.addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// Tabbed pane with panels for Jcomponents
// Instantiate JTabbedPane with keyword new
tabbedPane = new JTabbedPane(SwingConstants.LEFT);
// Calls method to set color
tabbedPane.setBackground(Color.blue);
tabbedPane.setForeground(Color.white);
populateTabbedPane();
//Calls the method that builds the menu
buildMenu();
dlframe.getContentPane().add(tabbedPane);
dlframe.pack();
dlframe.setSize(765, 690);
dlframe.setBackground(Color.white);
dlframe.setVisible(true);
}// Ends Constructor
private void populateTabbedPane()
// Create tabs with titles
tabbedPane.addTab("Welcome", null, new Welcome(), "Welcome to the Dive Log");
tabbedPane.addTab("Diver Data", null, new Diver(), "Click here to enter diver data");
tabbedPane.addTab("Log Dives", null, new Dives(),
"Click here to enter dives");
tabbedPane.addTab("Statistics", null, new Statistics(),
"Click here to calculate" + " dive statistics");
tabbedPane.addTab("Favorite Web Site", null, new Website(),
"Click here to see a web site");
tabbedPane.addTab("Resources", null, new Resources(),
"Click here to see a list of resources");
} //Ends populateTabbedPane method
// Method header
private void buildMenu()
// Instantiates JMenuBar, JMenu,
// and JMenuItem.
JMenuBar mb = new JMenuBar();
JMenu menu = new JMenu("File");
JMenuItem item = new JMenuItem("Exit");
//Closes the application from the Exit menu item.
item.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
System.exit(0);
} // Closes actionPerformed method
}); // Closes addActionListener method
//Adds the item to the menu object
menu.add(item);
//Adds the menu object with item onto the menu bar
mb.add(menu);
//Sets the menu bar in the frame
dlframe.setJMenuBar(mb);
} //Ends buildMenu method
public static void main(String[] args)
DiveLog dl = new DiveLog();
} //Ends Class
===========================================
Welcome.class (one of the 6 class files.The other 5 are identical to this.)
package divelog;
* This class creates the content on the
* Welcome tabbed pane in the Dive Log
* application.
* @version 1.0
//import for buttons, labels, and images
import javax.swing.*;
//import for layout manager
import java.awt.*;
public class Welcome extends JPanel
{ //Opens class
}//Closes class
=========================================================Might be a typo when you posted, but your DiveLog class is in package DiveLog, whereas your Welcome class is in package divelog (note the capitalization differences).
And even though they're in the same package, i'm always a fan of importing all the files you're going to need explicitly, such as
import divelog.Welcome
this applies to using the wildcard character too (as in, you shouldn't) to import files. Explicitly listing all imports allows you, and any other developer, to quickly see a list of all classes used. -
[SOLVED] Cannot compile dvb drivers.
Hi,
I'm setting up a htpc media center based on arch with mythtv and xbmc. I've installed the base and base-devel packages and I need to compile the tbs-dvb-drivers to make my TBS 6280 DVB-T2 card work.
Unfortunately I cannot compile the drivers as the compile process seems to enter in a loop, it continues to show the following output:
TBS drivers configured for x86_64 platform.
make -C /home/media/tbs-dvb-drivers/src/linux-tbs-drivers/v4l
make[1]: ingresso nella directory "/home/media/tbs-dvb-drivers/src/linux-tbs-drivers/v4l"
scripts/make_makefile.pl
./scripts/make_kconfig.pl /lib/modules/3.11.6-1-ARCH/build /lib/modules/3.11.6-1-ARCH/build
Preparing to compile for kernel version 3.11.6
***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.
If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.
Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:
cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install
Please see your distro's web site for instructions to build a new kernel.
./scripts/make_myconfig.pl
scripts/make_makefile.pl
./scripts/make_kconfig.pl /lib/modules/3.11.6-1-ARCH/build /lib/modules/3.11.6-1-ARCH/build
Preparing to compile for kernel version 3.11.6
***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.
If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.
Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:
cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install
Please see your distro's web site for instructions to build a new kernel.
./scripts/make_myconfig.pl
scripts/make_makefile.pl
./scripts/make_kconfig.pl /lib/modules/3.11.6-1-ARCH/build /lib/modules/3.11.6-1-ARCH/build
Preparing to compile for kernel version 3.11.6
***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.
If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.
Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:
cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install
Please see your distro's web site for instructions to build a new kernel.
./scripts/make_myconfig.pl
scripts/make_makefile.pl
./scripts/make_kconfig.pl /lib/modules/3.11.6-1-ARCH/build /lib/modules/3.11.6-1-ARCH/build
Preparing to compile for kernel version 3.11.6
I've waited up to 20 minutes, but the process seems stucked and the size of the folder doesn't grow up.
It's true that I have just the kernel-headers installed. In addition make continues to warn me that the edit date of several files is newer than the actual. Initially the date of the system was wrong (but not older than the file's) but now I've fixed it with the correct date in UTC. The problem persists.
I've also tried to compile from source directly but make enters into the same loop and gives me the same warnings.
Thank you in advance for any kind of help.
Regards.
Last edited by fasigno (2013-11-03 21:40:00)First make sure you have the core-devel package group installed. This is required to build AUR package in general.
Next, check to see if you have kernel-headers and v4l-utils installed? If not install them both and try again. I'm not sure if they are hard dependancies or not.
EDIT: Sorry, I see you wrote that you installed core-devel and kernel-headers already. It looks like you may have a time zone and hardware clock sync problem. If you just installed arch, make sure the timezone and locale are correct and havn't been altered since you first installed your system. If that's all good, then install the AUR package cleanly from scratch again.
Do you have NTP running?
Last edited by wdirksen (2013-11-03 20:36:18)
Maybe you are looking for
-
Hi All, Our office PCs r connected internally through LAN. Each PC set to get Automatic IP address. One PC is connected with external Modem. We have a laptop with internal modem. I am dialing the modem and connect to the PC with modem. Now after conn
-
I'm a complete newbie to this technology so hopefully you can help me out here! I have two Quadra 840AV workstations that I'd like to get operational or at the very least investigate the contents of the hard drives. So far I've been unsuccessful. Tri
-
Affect of using Line Item Dimensions
Hi Guys!! My Cube model involves 4 line item dimensions. I wanted to know if this will have any affect on the performance during loading/reporting on the cube. Marking as a line item would cut down on one join during reporting. Please do let me know
-
BI Content Activation going for wrong source system
Hi, I am trying to activate business content for the Customer cube in BI 7. The problem is that although the source system selection shows client 200 selected, the content activation goes for client 500 (which is the BI client). That is, during the a
-
How to get Archived Data back ?
Hi Experts, Please explain How to get Archived Data back ? Thank you.