Cannot connect to Nike+ at all

Since yesterday I've been unable to connect to Nike+. It just hangs in Firefox and I have to force quit. The ipod connects up to itunes ok.
I can't even access nike.com properly from FF which makes me think it's not an ipod issue. (So I can't log on to ask on the NIKE forum). I've tried in Safari and nike.com hangs that too. I've tried accessing the 'classic' nike+ page and that hangs too.
Anyone else here having the same problem? Can anyone help?
OSX 10.6, FF 3.5, ipod 1st gen nano.
Thanks,
Gill

http://discussions.apple.com/thread.jspa?threadID=2238179&tstart=31
I've tried this solution here and it seems to work.

Similar Messages

  • Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

    Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

    If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
    https://app.box.com/s/fe7v7h7kywjr23spumqp

  • Cleartune has updates available, but I keep getting a message saying "cannot connect to Itunes store"  all other updates work just fine?  The one app I paid for is the one that for some reason will not work.  How can I upgrade without buying it again?

    I loaded cleartune a while back, there are upgrades/updates available, which I'm trying to load.  When I choose update, it asks for my password, which I provide and I get a message saying "cannot connect to Itunes store"  I have many other apps I've loaded and upgraded just fine.  However this one, the one I actually wanted bad enough to pay for, is wanting me to delete it and buy another copy.  How can I update Cleartune without buying it again? 

    Hi all,
    This is a very interesting situation. I did try to update one of my apps within itunes as was suggested. That worked !!
    But then I noticed that I had 2 different logins that I must have created over the years. I almost forgot. I have a apple ID and an AOL ID. It seems that I purchased (actually they are all free) some apps with one ID and other apps with the other ID. I must have done this by accident.
    So when I log out of one of the IDs on my Touch and then log in with the other ID, I can update the apps.
    It seems that something changed on Apple's servers. It seems that until recently I was able to update free apps regardless of what ID I originally bought them with. Now it seems that's not the case. Apple must check this now.
    Now that I know what the issue is, I'll make sure I use one ID all the time.
    Thanks,
    Steve

  • After 7.0.6 upgrade Icloud email "Cannot Connect To Server".  All other email works fine.

    After upgrade to 7.0.6 both IPad and iPhone now will not send or receive Icloud email while at home. Get "Cannot connect to server " message.   All other email accounts (google, verizon) work fine.  Plus the "last backup" information unavailable as well as icloud storage information.  Says unavailable, try again later.   Also cannot view body of emails sent or received in the last 2 days.   I am at work now and all works normally.   If this is a wifi issue, I I do not understand why all other email accounts are sending receiving ok.  It's only the Icloud server that seems to be the problem.

    Hey there KevGelay!
    I have an article for you that will help you troubleshoot this issue with your ability to access iCloud mail:
    iCloud: Troubleshooting iCloud Mail
    http://support.apple.com/kb/ts4002
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Installed a new harddrive in my macbook pro. cannot connect to hp photosmart all in one printer!!

    I, recently, installed a new hard drive on my MacBook Pro Laptop Computer (2007 model).
    Now, I cannot print out anything on my HP Photosmart  C7180 All-In-One Printer! They don't 
    seem to be connected, as the printer icon shows up on my computer,  and then, immediately, evaporates
    into thin air.
    How do I connect my HP Printer to my laptop, now that I have a new harddrive installed?

    Hello Lady22:
             When you received your printer you should have received two insulation disks one is for Windows computers and the other one is for Mac ( Apple Computer) If you have the disks please install Mac disk.  Apple computers do search and down load the parcel software so you can do basic printing commands. You need to find the program that is some where in your computer that allows you to hook up Pinters and Devices. Ounce you find this open it up then connect the printer cable to the lap top. The computer program will list HP's printers yuo need to select your printers model number. Then it will down load the drivers for it to run basic commands. Ounce they are download run a test to make sure it is working right. Contact HP's store and asked them to send you a new set of insulation disk. Your old disk may have fine dust film on them. Clean them off pior to inserting them If you use glass cleaner and fine cloth make sure they are dry off before you insert them. If you used them before maybe a speck of dirt blocked out parcel program that caused it not to install correctly . frrw

  • Cannot connect to internet at all.

    On my current desktop my enthernet and WiFi or wireless drivers have been deleted from my HP Pavilon p7-1240 desktop and I can not access the internet on it at all. I cannot install the drivers because I can't download them off the internet because I can't get on the internet! This ordeal has been frustrating and I'd like some help. How can I get onto the internet and what drivers do I need. How can I get those drivers? Please help.
    Thanks,
    This question was solved.
    View Solution.

    Hi:
    Below are the links to the ethernet and wireless card drivers you need.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-103835-1&cc=us&dlc=en&lc=en...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-97367-1&cc=us&dlc=en&lc=en&...
    Download the drivers to the PC you posted your message from.
    Either burn them to a CD or copy them to a usb flash drive.
    Use either media to transfer the drivers to your PC and install them.

  • IMac cannot connect to internet, but all other devices can?

    Ok So I have an iMac, two iphones, and a mac book air in the house.  The mac book and iphones can connect to my chinese tp-link router, and connect to the internet wirelessly just fine.  The iMac however, everytime I tried to connect to the internet via the Wi-Fi signal through the tp-link router, the wifi signal on the very top right hand corner of the screen has an exclamation mark on the wifi bar, and it says Alert: No Internet Connection.  The ethernet works fine connected directly to the iMac, and I can access internet via ethernet wire setting, but not wifi-setting from my tp-link router.
    What I've narrowed it down to:
    It is not the problem with the router, because it is configured so that every device I've tried, except for the iMac works with the router.
    It is not the problem with my internet connect, because all other devices works, except for iMac.
    It is not the problem with my internet card on the iMac, because I was able to connect with an airport extreme about two weeks ago via wirelessly.
    It is not the hardware problem, like I said, ethernet socket, internet card, they all work.
    It has nothing to do with the software update, the software is up to date, running on Mac OS X, Version 10.7.2 lion.
    It has to be a software issue, something to do with the configuration of the network.
    I've already looked everywhere on the apple discussions, I found similar problems, but they were either unresolved, or unrelated to my problem.  So what did I mess up on?
    Best
    Brian

    Hi everyone
    I have the exact same problem! My imac, operating with 10.7.2 will not connect and has the ! over wifi icon. (sadly connecting the ethernet cable and disconnecting again didn't work for me).
    My MacBook is running with os 10.6.8 and works with the router although now I can't update the operating system or I'll have the same probs with Macbook!
    So, I've spent most of this week back and forth with apple support, TP-Link and ISP. (all firmware for router completely updated) and nothing's worked.
    I have been told by an apple senior technician that the TP-LINK router is not compatible with computers operating with os10.7.2 and I need a different router.
    Just thought I should let everyone know to save you wasting loads of money on phone calls like I just did!
    take care

  • Cannot connect to wifi at all!!

    I upgraded from leopard to mountain lion for while.it connects to wifi but not the internet. I see the full bars but when i open safari it wont load any page. I used the "assist me" diagnose, wasn't any help (the light next to internet and server item is yellow)
    I did anything i could with the router and everything. I even tried it on other wifi networks, the problem was the same, didn't work.
    My device is a macbook pro 15. Core i5
    Please help. This is been bugging me for months now...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}' | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit 
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • HT1414 wifi is grayed out, also 3g is not working, i cannot connect to internet at all. any suggestions how to resolve this issue

    my wifi signal is grayed out, i cannot switch it on, also 3g on my phone has stopped working, i have updated software a few weeks ago, i also restored my phone 2 days ago, and tried to rest newtwork settings, but it does not help at all. any sggestions or comments what can be done in order to resolve this issue

    You are having a hardware failure.  You will need to bring your phone to Apple for replacement.  If not under warranty, expect to pay $199 for out of warranty replacement.

  • TS1368 ,Cannot connect to ITunes' - tried all please assist - on IPad?

    When I tap the iTunes button I get the above message - please assist

    You can look here for help.
    http://support.apple.com/kb/TS1368
    But try this first and see if you can connect.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • My IPad 2 also will not connect to ITunes for  updates and purchased apps.  It shows Waiting for several minutes then says it cannot connect to ITunes.  All other wifi functions are working fine on it.

    I see this is happening to a lot of folks today.  Has anyone found a solution?

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • Cannot connect to nike plus form iTunes

    I ran the diagnostics and it says that the internet connection status was failed. I'm able to get on the internet so i dont see how that can be. I'm also able to use the shop in itunes. I'm really confused and have tried everything i can think of to get this to work.

    I figured it out!
    I needed to set my default browser to IE.

  • Cannot connect ATV 2.0 (factory restore) to wifi (tried all secure modes)

    Restored ATV to v2.0. ATV sees the wireless network but cannot connect. Have attempted all types of encryption settings:
    1. WPA2-PSK: AES, TKIP and mixed mode
    2. WPA-PSK
    3. WEP 128bit, hex and ascii.
    Using Buffalo Airstation WZR-HP-G300NH, firmware 1.74. Wireless was working fine at current version (3.x?) prior to factory restore using WPA2-PSK. I recall having these same issues on another router when I first got my ATV and finally had to revert to WEP 128bit 26 character hex code to get it to work. Unfortunately, that's not working with this router.
    Ethernet plug is dead, so I can't connect it directly to the network.
    Any ideas?

    Closing this as answered. Went into Apple, they pretty much confirmed that both the wifi and ethernet were dead. It was out of warranty so I just bought a new one.

  • MY iphone 4s cannot connect to wifi after updating to ios 8.1.1

    after updating to ios 8.1.1, my iphone 4s cannot connect to wifi at all.
    at first, connection will show up, but when i tried to connect, i will see the wifi logo but after 15 or 30 seconds, connection will be lost again.
    i will try again, but this time, my phone will hang, i need to restart but then, wifi will not work at all.
    it will show that its searching for network but its not. then it will hang again,
    after this, give up already.
    my phone is working perfectly fine until updating my ios to 8.1.1.
    the problem is i cannot upgrade again as i cannot connect to wifi.

    Settings/General/Reset - Reset Network Settings. If you can't turn WiFi on see: http://support.apple.com/kb/TS1559

  • Cannot connect to the Reporting Server errror message during installation

    Hello all.
    I'm trying to install BPC 7 sp5 in a two server environment, but the installation stops with the error message "Cannot connect to XXX"

    Hello all.
    I'm trying to install BPC 7 sp5 in a two server environment, but the installation stops with the error message "Cannot connect to . Please check report server name".
    Environment:
    Appserver: Win2003 R2 32 bit.
    Sql server: Win2008 64 bit, Sql 2008 Server 64 bit.
    Default installation of Report Server was used. So virtual directory is ReportServer. I can successfully connect to Report server from IE (http://ReportServerName/ReportServer). The installation user is a domain user and is member of the Administrators group on both servers. Ports 1433, 2383 and 80 are open.
    So then I wonder if the error comes from the fact that we're using Windows 2008 as OS on sql server. Is it possible to use Win2008 on sql server?
    Kind regards
    Arild Bjørsvik.

Maybe you are looking for