Cannot connect to Smart Tee input pin... [Windows 7 64 bit]

Hi TV Tuner users! I need some help.
I've been searching on this forum and all over the web for a solution. I hope some of you guys might have a solution.
I have a TV @ anywhere Plus and run Windows 7. The card has previously worked but for the past few months it has malfunctioned.
When I start the TV @ anywhere recording software I get following errors:
"Cannot connect to Smart Tee input pin..."
"Cannot render audio renderer (5001)..."
"Cannot init Direct show interface... (1001)"
I have not made any major adjustments to the computers drivers or hardware. I've reinstalled and installed, and reinstalled different versions of the driver and software. I've even switched PCI port.
So I'm a bit confused. Anyone having an idea for a solution?
This guy (https://forum-en.msi.com/index.php?topic=124889.0) even formatted his harddrive. It's an old post, but maybe you've figured out something since that post?
Regards
Erling

No i was hoping i didnt need to... But i guess i have no choice

Similar Messages

Cannot connect to Smart Tee input pin...

Hello i have some problem with the picture on my TV@nywhere card it actually started when i upgraded my DivX version 5 something too 6.2.2 ... The image is all black but i can still hear the sound And this message appear when i start Tv@anywhere plus " Cannot connect to Smart Tee input pin..."
Can someone please help me

No i was hoping i didnt need to... But i guess i have no choice

I cannot sync to itunes on my computer (Windows Vista 32 bit) with my mini conected.

I cannot sync to itunes on my computer (Windows Vista 32 bit) with my mini connected. What should I do?
My Mini will not boot up. I tried holding both buttons down. I got a "connect to itunes" message. I connected. and nothing happens.

Hello there Chess-ster,
If I understand correctly your iPad mini is not being recognized in iTunes on your Windows Vista PC. I would recommend you use the troubleshooting in the following article:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Start with these steps and work your way down as needed:
Restart
Turn off your computer and your iOS device, then turn them on again.
Update your computer
Check to make sure that you've installed all required updates for your computer.
Update iTunes
Check that you have the latest version of iTunes installed on your computer.
Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Cannot Create PDF Acrobat 9.4 Standard Windows 7, 64 bit

Hi,
Currenlty my colleague and I have the same issue; we cannot create PDF documents using Acrobat 9.4 Standard or the office plug in, and there is no PDF printer available after the acrobat installation either.
We are both using Windows 7, 64 bit version. I have checked and confirmed Acrobat 9 on Windows 7 64 bit with Office 2007 should be compatible.
* When using the 'Create PDF from file' feature from Acrobat we get the following error: "Unable to find "Adobe PDF" resource files. Do you want to run the installer in repair mode?"
I have run the installer in repair mode multiple times, same isssue occurs after this is done.
* When using the Acrobat plug-in for office, for example in Word (we both use Office Professional 2007) and selecting 'Create PDF' it will prompt for a save location, after select save nothing happens, and there is no PDF file created in the save locaton.
So far I have tried the following without any success:
- Un-installing and re-installing acrobat, multiple times
- running the acrobat application in compatability mode for Windows XP
- attempted to create PDF files from older word versions i.e. .doc and .docx have the same issue
- attempted to manually install PDF printer using the acrobat installation files - did not work
* I am aware that Office 2007 will allow me to save a document as PDF, however we still need acrobat for the publishing quality and editing features.
Any help or suggestions regarding this issue would be greatly appreciated :-)
Kind Regards,
Wade

I understand what you are suggesting. I have two laptops the same model. AA works on one but not the other. I do have office 7 and a 64 bit OS.
Thanks for the help
Jack Sherwood
From: "Bill@VT" <[email protected]>
To: Jack Sherwood <[email protected]>
Sent: Sunday, July 10, 2011 8:21 PM
Subject: Cannot Create PDF Acrobat 9.4 Standard Windows 7, 64 bit
If you are running a 64-bit version of OFFICE 2007 (if one exists), that may be the issue. AA X did not work with that version until the most recent release as I understand it. Since you have AA 9.4, I am not sure of the compatibility of it with the 64-bit version. It is strange that the printer does not appear. It seems a few others have had similar problems and as I recall, someone made a suggestion to fix that recently -- though it may have been for AA X. You might search on 64-bit or such.

MacBook Pro cannot connect to external display (projector) under Windows

Our office has got one of those lovely new 13" MacBook Pros and we cannot figure out why it cannot connect to either of our 2 projectors with Windows 7.
We have an older MBP with NVidia graphics that connects just fine under both OS X and Windows. And this machine connects fine under Snow Leopard.
There was a recent Thunderbolt chipset update and we applied that; on the Windows side the Intel driver has been updated but nothing happens. Have also zapped the PRAM to no effect.
To add another wrinkle: I just connected the MBP to my Cinema Display and the external display shows fine in both OS X and Windows--Windows didn't even require me to go to the control panel.
This leads me to two thoughts: either it is something with the Thunderbolt to VGA adaptor (hard to believe, though, since it works for OS X) or it is something to do with the native resolution of the projector (equally hard to believe, as changing through various settings in Windows NOTHING happens on the external projector--it doesn't blink, go back or anything.)
Any ideas?

I wish I could find the discussion, but I cannot.
There was a discussion about the Windows 7 driver for the Thunderbolt port. The conclusion I believe was that it only outputs digital signals, not analog.
The other conclusions were:
A USB-VGA adapter adapter bypasses this limitation because the driver is in the adapter itself and works regardless of the OSX/Windows operating system in charge.
Run Windows under VM, where OSX is in charge and can create analog output through Thunderbolt
If only I could find that thread ...

TS1702 How to get rid of "Cannot connect to iTunes store" pop-up window

My iPad is showing a pop-up window that says "Cannot connect to iTunes Store". I cannot restart my iPad because I can't get the pop-up to disappear... and I cannot slide the power off option because it's blocked by the "Cannot Connect" popup.
When I press the OK button in the pop-up window, it flickers, but does not accept the command.

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

HT4759 Cannot connect to iCloud on my PC (Windows 7).

iCloud 2.1.1 - error message: You can't sign in because of a server error.
Also when I try to connect to iTunes Store (iTunes for Windows), it keep trying to connect for ever.

Does a Reboot help?
Looks like it helped in a different thread.
https://discussions.apple.com/thread/4728649

Cannot download iTunes 10.6.1 on Windows 7 64 bit

I am trying to download iTunes 10.6.1 onto my Windows 7 64 bit PC and get the message that the installer has insufficient privileges to access this directory: C\ Program Data\Microsoft Windows\Start Menu\Programs\iTunes. The installation cannot continue. Log on as administrator or conatact your system administrator. I am the administrator for this personal PC and am logged in as such. Anyone have any ideas how to get around this snafu??

I had this problem and struggled quite a bit with it, it was beyond frustrating!
I finally did the following to get it to work:
1) I completely uninstalled everything Apple related.. iTunes, Quicktime, Apple Mobile Device Support, Bonjour, etc. reboot the computer so everything is out of memory, cache etc...
2) I plugged in my apple device and installed the drivers for the device (in my case it was an iPhone), and then rebooted.
3) When started up, I got a notice that I needed to update my apple installations, from Apple Software Update, which was essentially the same thing as installing everything fresh as I had previously taken everything off my computer
4) When I ran all of the installations from the Apple Software Update then I had no problems at all. This is the key to the solution...to run it from Apple Software Update, vs downloading the installation off of the website.
I am not sure if plugging the device in first helped or not, and/or if you could just pull down apple software update from the website, but that was what I did, so I thought I had better list it.
Hopefully this works for others, as I was at the end of my rope. It appears that the download from the Apple website has some sort of glitch for Windows 7 64 bit that the Apple Software Update does not.
Good Luck!
Becky

Ipad4 connection MTP USB device error with Windows 7 64 bit

I have recently bought iPad 4. When I connected to my computer through USB running Windows 7 Professional 64 bit i got the following error message
"MTP USB Device failed to install"
Please guige me

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

Cannot install iTunes 12.1.1 on Windows 7 (64 bit)

Hello. I've tried to do this about 10 times now and it's driving me crazy. The new iTunes update installed first time and works fine on my laptop (Win 7 home premium, 32 bit) but it absolutely refuses to work on my desktop (Win 7 home premium, 64 bit, quad core, 8gb RAM, ample hard drive space). I've been using iTunes for years and had no problems with the previous version.
The installation hangs 75% of the way through each attempt, with the message "Service 'Apple Mobile Device Service' failed to start. Verify that you have sufficient privileges to start system services". I then get 3 options of abort, retry and ignore. If I retry it just keeps coming back to the same message. If I ignore then the installation completes but I then get the message "iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7". Then, every time I restart my machine or try to launch iTunes I get the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 193)".
Here's what I've tried, in various combinations:
ensured I have installed all windows updates
uninstalled all iTunes and related programmes in the order specified on the Apple support pages (via Control Panel and the executable file), restarted, removed all the associated folders and files (including all 32 and 64 bit versions) from the Program Files directory on my C drive (where the iTunes installation is located), verified that they are gone.
cleared cache and temporary internet files from my browser, emptied the recycle bin
uninstalled QuickTime
installed the executable iTunes package via "Run as administrator"
tried the "Repair" option from both Control Panel and via the executable file
unpacked the Apple Mobile Device Service separately and installed separately
And nothing makes any difference to the result. I can't help but think there that is some kind of incompatibility between the latest version of A.M.D.S. and the latest version of Windows 7 64 bit. I'm not interested in whether it's Apple's or Microsoft's fault but I would like a solution, even if that solution is reinstalling an older version of iTunes. I hope you can help.

A bit of repetition, mainly for the benefit of anyone else with the same issue. In your case the "for older video cards" version might be worth a try.
When cleaning folders you need to check both the Program Files and Program Files (x86) folders, which you may well have done but didn't mention in the detail above.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Mobile Device Support won't install normally.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Connected Deskjet 6940 to computer with windows 7 64 bit, duplex print will not work?

I have a Deskjet 6940 model C8970A. The Duplex printer function does not work. It will manually ask me to turn around all the pages to print on the other side. Before it would print front then back of page at a time. I have Windows 7 64 bit on the new computer.

Hi,
The Duplex Unit is disabled by default, make sure to enable the accessory as following:
Enter Control Panel > Devices and Printers
Right click the HP Deskjet 6940 icon, then click Printer Properties.
Select the Device Settings tab.
Set the Duplex Unit as Installed, click OK.
Now set Print On Both Sides as Automatically from the Printing Preferences Dialog.
Please let me know if you may still experience any issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Wireless LAN cannot connect with the wireless router with Windows 8.1

Hi,
I currently have a Lenovo V570 laptop with Windows 8.1 running on it. I cannot seem to stay connected to a wireless wifi connection for more than 10 minutes without it going "limited" and a yellow caution exclamation icon hovering over my connected wifi icon.
When it goes limited, I cannot access the internet whatsoever and it's growing increasingly frustrating. I used to have success by disconnected and reconnecting which seemed to temporarily solve the issue, but now even that is not working.
I did not have this issue (I don't believe so) when I first installed Windows 8 on this laptop a few years ago. This is an issue I've been dealing with for over a year now and only within the past 4-6 months has it been really bad.
I found this support page here which provides solutions for my problem but after attempting all of them, unfortunately none of them worked. The only time I experience no issues is when I directly connect an ethernet cord from my laptop to the router.
The wireless problem exists for all wifi connections, whether it be my university wifi, home wifi, local, etc.
Can anybody please help me out? I'd be more than happy to provide additional info to get this problem fixed once and for all.

Hi,
I currently have a Lenovo V570 laptop with Windows 8.1 running on it. I cannot seem to stay connected to a wireless wifi connection for more than 10 minutes without it going "limited" and a yellow caution exclamation icon hovering over my connected wifi icon.
When it goes limited, I cannot access the internet whatsoever and it's growing increasingly frustrating. I used to have success by disconnected and reconnecting which seemed to temporarily solve the issue, but now even that is not working.
I did not have this issue (I don't believe so) when I first installed Windows 8 on this laptop a few years ago. This is an issue I've been dealing with for over a year now and only within the past 4-6 months has it been really bad.
I found this support page here which provides solutions for my problem but after attempting all of them, unfortunately none of them worked. The only time I experience no issues is when I directly connect an ethernet cord from my laptop to the router.
The wireless problem exists for all wifi connections, whether it be my university wifi, home wifi, local, etc.
Can anybody please help me out? I'd be more than happy to provide additional info to get this problem fixed once and for all.

Cannot connect to iTunes store on my Windows 7 computer

iTunes 9 worked fine on my system but ever since version 10 was introduced I haven't been able to connect to iTunes store from my computer. The screen remains blank. Diagnostics show everything is ok and I can download applications and sync my iPad but not access the store.

How to get iTunes Store to Work with Windows 7
First, Remove all iTunes and supporting software – and all “remnants” using Revo Uninstaller. Ensure you set Revo Uninstaller on its “Advanced” setting.   You should be able to download a Revo trial software version at no cost. Recommend one follow the directions posted at this website:   http://www.howtogeek.com/howto/23959/completely-remove-itunes-and-other-apple-so ftware-from-a-windows-computer/
The goal/intent of these directions/procedures is to ensure complete removal of all iTunes and its supporting software. Make sure you get all of it, or you will end up repeating this lengthy procedure.
Next, before reinstalling iTunes:
Start-> Programs -> Accessories -> (Right Click On Command Prompt) ->Run the Command Prompt as Administrator then type in:
netsh winsock reset, hit enter, restart PC.
After this procedure, then reload the latest version of iTunes Software and see if you can access the iTunes Store.
If the iTunes Store does not open or completely open after installation, then run this procedure:
Start-> Programs -> Accessories -> (Right Click On Command Prompt) ->Run the Command Prompt as Administrator then type in:
netsh winsock reset, hit enter, restart PC, open iTunes… then open iTunes Store (yes, this is a repeat of the command line you ran prior to installation).
After this procedure, you may find the iTunes Store’s “initial page” will open. However, you may not be able to access any music within the iTunes store…   Ensure you are logged in with your name and password…
Once you know you are logged in with your name and password, then:
On the Start menu, point to All Programs > Accessories and then right-click Command Prompt and choose Run as Administrator from the shortcut menu. If Windows needs your permission to continue, click Continue.
In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
You should see a message that the DNS Resolver Cache has been successfully flushed.
But wait, there’s more! Now you need to go to the “Edit Button” of iTunes and select “Parental”.   Under “Parental”, check “Allow access to iTunes u” and then ensure iTunes Store is “unchecked”, then press “OK” to ensure this configuration “takes”. Then, stop and restart iTunes. You should now have a smooth running version of iTunes with full access to the iTunes store. If not, then please modify these directions for those requiring a solid solution. Thanks

I cannot connect to the store from my windows 7 laptop I have an ipad but i use the laptop to organise my music. the error says check your internet connection but if i use the internet to get to the store it works any suggestions

I use itunes on my laptop to work with my ipad I can sync no problem but when I try to get to the store it doesn't connect and says check my internet connection but there is nothing wrong there that I can see
If anyone has had a similar problem and resolved it I would love to know how
thanks

Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368

Cannot connect to Office365 account using Lync Windows Store

Dear all,
I am runing windows 8.1 on my PC and Tablet. I have an Office365 account where I am using lync as other services.
When downloading the Desktop Lync app from my office 365 admin portal and running it for the first time, I am prompt to enter user and password. Then I enter my office365 account and I manage succesfully to use link.
Problem occurs by using Lync app from Windows Store in my tablet.
What is happening is that first of all for the login account of windows I need to use a Microsoft Account which has different credential than my office365 account of course.
Then I download the Lync from store and start it. But I could not sign in as it never prompt me for entering a password. It seems it trys to login to Lync with my current windows 8 login user. If I press on "Reset login information" it has no effect.
What is the way to prompte me for password in order that I enter correct one ?
regards

That it very odd, it should not use your PC login details. After it trys to login, what error do you see? Its possible that its trying to use the same account you used to login in to the Lync Client if you saved credentials. however if that didnt fail I
would expect the same of the store app.
Have you configured DNS records for lyncdiscover.domain.com?
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

Cannot connect to Smart Tee input pin... [Windows 7 64 bit]

Similar Messages

Maybe you are looking for