Cannot connect to twitter on maveriks

Hello, I am unable to connect either my twitter account or linkedin to the internet account prefrances page. I have tried other types of accounts and the problem only occurs with with the twitter account and the linkedin account. I am at a loss because when I enter my correct username and password I recive a message "unable to verify account name or password" I am not sure what to do, it is not localized to my user I have created a second admin account and tested it on there and still no luck, I have reset my keychain and also reset my passwords on both twitter and linkedin and the only reason I can think of for why this is happening is a problem in the update to maveriks which means a re-install of the OS.
Any feedback would be appreciated.
I am running a Retina display 15 inch with 16 gigs of ram and a 2.7 quad, and like i said running 1.9.
Thank you.

If it happens under a different user this would be a system wide issue, can you check http://www.java.com/testjava and see if you running the latest version? If you are try safeboot and see if issue happens there. http://support.apple.com/kb/HT1455

Similar Messages

Why I cannot connect to twitter via iPhone?

I just cannot connect to Twitter via iPhone.
It started around 6 months ago, before it was working just fine.
Important notes:
I live in China, dono need to connect to it via VPN.
Interesting thing is that in my iPad app I have no problem at all, can connect, place posts, etc.
Just in iPhone its not possible, not even connecting to the site via Safari.
Why's that? Anyone has any idea on how to solve this problem?

You have to buy Photoshop Express first. It's a In-App Purchase.
Setting>Purchases>Adobe Effect Pack
http://i1224.photobucket.com/albums/ee374/Diavonex/e6e3553e.jpg

The tweet "..." cannot be sent because the connection to Twitter failed

I've been attempting to use the built in twitter functionality to post photos, however the title error message keeps popping up! I have deleted the account setings from the phone and reinstalled Twitter as suggested on the Twitter support blog for some iPhone issues - but still no luck.
I can add the account and verify it under 'Settings -> Twitter' and use any other Twitter apps without an issue, just I can't tweet from iOS!
Has anyone else had this issue?

My Tweets are posting properly from my IPAD Air, however, I get the error message referenced above when trying to do the same exact action from my Iphone 5S. I try to send the Tweet and it says: Cannot Send Tweet - The tweet "article name" cannot be sent because the connection to Twitter failed. But when I take the same exact action from my IPAD Air, the tweet posts properly to Twitter. Any recommended fixes here?

I get this error sometimes when I try to post a photo to Twitter: "The Tweet "Blah, blah, blah." cannot be sent because the connection to Twitter failed"

Hello, everyone
I've been having a very hard time trying to fix this issue; I get this error 'sometimes', when I try to post a photo to Twitter: "The Tweet cannot be sent because the connection to Twitter failed".
Here's a photo:
How to I fix this?
Please help, Thank you!

Never-mind. I found out what's causing this issue. On Twitter's website support page, I found this: https://support.twitter.com/articles/20156423-posting-photos-on-twitter it gives info about posting photos on Twitter; well, it says: "photos must be 5 MB or lower, and GIF's must be 6 MB or lower".
Please share this info to all Mac, or iDevice users who are having this issue. Thank you!

In Notification Center, Whenever I try to send a tweet I get the "tweet cannot be sent because connection to Twitter failed error" What do I do? This is happening on 10.9 Mavericks

I see that Apple has had the same issue in 10.8 since I read http://article.wn.com/view/2013/03/21/Fix_Connection_to_Twitter_failed_when_twee ting_from_OS_X/. But I'm not sure what to do now since I have not been able to find a fix for 10.9 Mavericks

Try reading this article. It might help you: http://www.cnet.com/how-to/fix-connection-to-twitter-failed-when-tweeting-from-o s-x/
Thank you!

Cannot connect to home wi-fi. temporarily connects then disconnects ?

My Droid-X cannot connect to my wi-fi home router. using WPA2-PSK. Phone sees network but will not connect ?
At one point is connected for a few seconds only ?

We certainly want you to be connected at home amc129!
Lets take a look at this! Have you been able to connect previously to the WPA2-PSK setting? Can you connect with other WiFi networks like normal? If so, I recommend contacting the router provider, as a software update or settings change may be necessary. Please keep me posted!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

Laserjet pro 100 cannot connect to wireless

Hi There,
I cannot connect my printer HP laserjet 100 color mfp m175nw to the wireless. It is connect to the router and it install on the computer with the Usb cable but not with the wireless connection.
How can I fix this?
Before it used to work perfect I could even print from my phone, now unless I connect my computer to the printer with cable it will not work because I cannot install the printer working with the wireless connection.
Please help
This question was solved.
View Solution.

Thanks for letting us know, glad you got it fixed
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Cannot connect to newly created SQL 2008 R2 instance. Login failed for user...

I'm not a SQL guy, just figuring my way around here...
I just created a new instance on an existing SQL server. The original instance works fine. On
Database Engine Configuration > Account Provisioning
I selected Windows authentication mode and added several users, myself among them.
Tried to log in with one my account and getting:
TITLE: Connect to Server
Cannot connect to SERVERNAME\INSTANCE.
ADDITIONAL INFORMATION:
Login failed for user 'domain\myusername'. (Microsoft SQL Server, Error: 18456)
Guidance/suggestions?
Thanks,
Scott

http://sqlserver-help.com/2014/07/08/help-how-to-find-cause-of-login-failed-for-user-error/
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Cannot Connect to the iBooks Store

When I open the iBooks store in Mavericks I get "Cannot Connect to the iBooks Store". Also, in Safari anything it cannot connect to anything that uses HTTPS (secure/encrypted connection) such as Twitter. However I do not know if that persisted from Mountain Lion, as I use Firefox. It is solely with my computer, the other mac on Mavericks connects just fine. However, here's where it gets strange. My iPhone, which I have my keychain synced to, does not have a problem. Additionally, the iTunes Store on iTunes can connect to the books section. I've tried going through my certificates and resetting them to Use System Default, using First Aid, changing my MTU in Network Preferences to 1300, and fixing disk permissions, but none of that worked. I have no proxies and no DNS servers.
I'm getting this error in this console whenever I open iBooks: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9813).

I have exactly the same issue as describet by "bengersfoo", i.e.
"I can find exactly the certificate that pavelfrompraha mentions, and it is set to "Always Trust".
But I cannot reem to reset it to System Defaults. When I choose that option it has always reverted to "Always Trust" whenever I check again."
It would be very helpful if someone could please explain how to make the "System Defaults" setting stick.

Just received my T530 and cannot connect to the internet

I just recieved my T530 laptop on Friday, 8/26. Right out of the box, I am unable to connect and sustain any internet connection. I have my other PC tried on two different wireless routers and it works fine. It is not the routers that is the issue.
My computer says I am connected to the internet but I cannot browse. I have enabled the Intel connection under properties. The drivers are all up to date. I have restored the system to factory settings because a Lenovo tech support rep said the Windows update was messing new laptops up.
All of this and I still cannot connect to the internet. I am a wits end. What do I have to do to get this working? Also, how do I return the laptop for a refund?
Thanks!

ladiel,
Typically support will ship a box overnight to you for you to send the system in, and in most cases repairs at the depot are 1-2 days and then it will be shipped back to you overnight.
If you wish to return, you will need to call sales, and let them know you had a defective system and provide the service case number (where you called support to verify your trouble)
I appreciate your time urgency on this.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Dreaded "cannot connect to youtube" but only over WiFi. Twitterific bad to

Okay, so here's the deal... for some reason on my home WiFi, my iPhone (and my wife's) suddenly isn't working right.
I get the "cannot connect to YouTube" error in the YouTube app. I get a "Twitter API Error - the connection to Twitter failed with 'can't find host'" error in Twitterific. Scrabble won't let me connect to Facebook. I can only assume there are other problems as well.
Here's the deal - it's only happening while connected to WiFi. I turn it off and use 3G, and it all works fine. Thing is, I want to use my WiFi connection. Any thoughts on why this suddenly started happening? Worked fine yesterday. I've reset both my DSL modem and my wireless router to no avail. Nothing has changed since then.
(My DSL is through Embarq)
Any thoughts?

Oh yeah, forgot to mention that most everything else is working fine on it. My email is coming through, and regular Safari stuff is working.

IBooks says that it cannot connect to the iTunes store?

iBooks cannot connect to the iTunes store? If I go to iTunes, it will connect to the store. Any ideas?

This could be caused by several things. Please provide more details on how you are connecting to iTunes, i.e. WiFi or 3G. If WiFi is it your own home connection or a public one?
For example at work there is no real reason for me to connect my iPhone to the company WiFi because they have nearly everything blocked; iTunes, gmail, aol mail, yahoo mail, FaceBook, Twitter. Basically any of the Fun web sites. So if I feel the need to update an app while I'm at work I need to wait for lunch go down to the lobby and use the Starbucks WiFi Connection.
But if you are just having a problem connecting to iTunes you might try resetting your network connections, Settings => General => (Scroll to bottom) Reset => Reset Network Settings, wait for phone to restart and connect to the network.
This will just disconnect and reconnect you from your 3G provider and clear out all the junk that has built up in the network buffers. You will have to reenter your WiFi Passwords when you try to reconnect to them but you should have a cleaner connection.
You can also try restarting your phone. Press and HOLD both the Home button and the Power button on the top of the phone at the same time for about 10 - 20 seconds. When the Slide to Power Off screen appears CONTINUE to hold the buttons down. The screen will go black and then the apple logo should appear. When the logo appears release both buttons and wait for the phone to restart and reconnect to the network.
A quick option (Although not as effective as doing a Network Reset) is to turn on Airplan Mode, wait 15 seconds and turn it off. This breaks the connection with your network provider and then starts it up again. It just doesn't clean out all the stuff in the buffers, but you may get a better internet connection.

Cannot connect console to site server

Hi Guys,
We did a restart on our sccm server today and after the reboot we could not connect to it anymore via the admin console on a remote computer. It still works on the server just not remote computers.
Tried to troubleshoot using guides online but have got nowhere.
I hope someone can help us here.
Thanks,
Richard
Below is a section of the adminUIlog
[15, PID:5752][03/12/2015 16:03:42] :System.Runtime.InteropServices.COMException\r\nThe RPC server is unavailable. (Exception from HRESULT: 0x800706BA)\r\n   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode,
IntPtr errorInfo)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR(Int32 errorCode)
   at System.Management.ManagementScope.InitializeGuts(Object o)
   at System.Management.ManagementScope.Initialize()
   at System.Management.ManagementObjectSearcher.Initialize()
   at System.Management.ManagementObjectSearcher.Get()
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)\r\n
[15, PID:5752][03/12/2015 16:03:42] :Transport error; failed to connect, message: 'The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.SmsConnectionException\r\nThe RPC server is unavailable.
(Exception from HRESULT: 0x800706BA)\r\n   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)
   at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nThe RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
\r\nSystem.Runtime.InteropServices.COMException\r\nThe RPC server is unavailable. (Exception from HRESULT: 0x800706BA)\r\n   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR(Int32 errorCode)
   at System.Management.ManagementScope.InitializeGuts(Object o)
   at System.Management.ManagementScope.Initialize()
   at System.Management.ManagementObjectSearcher.Initialize()
   at System.Management.ManagementObjectSearcher.Get()
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)\r\n
[15, PID:5752][03/12/2015 16:03:42] :System.Runtime.InteropServices.COMException\r\nThe RPC server is unavailable. (Exception from HRESULT: 0x800706BA)\r\n   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR(Int32 errorCode)
   at System.Management.ManagementScope.InitializeGuts(Object o)
   at System.Management.ManagementScope.Initialize()
   at System.Management.ManagementObject.Initialize(Boolean getObject)
   at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String methodClass, String methodName, Dictionary`2 methodParameters, Boolean traceParameters)\r\n

[15, PID:5752][03/12/2015 16:03:42] :Transport error; failed to connect, message: 'The RPC server is unavailable.
seems like ,cannot connect to wmi. can you try performing the below steps to make sure if you are able to connect wmi namespace remotely ?
Click Start, click Run, and then type wbemtest.
Click Connect, type \\siteserver\root\sms, and then click Login.
Click Enum Classes, click Recursive, and then click OK.
In the Query Result list, double-click SMS_ProviderLocation.
Click Instances, and then double-click the line that contains the target site code. For example, SMS_ProviderLocation.SiteCode="<var style="box-sizing:border-box;margin:0px;padding:0px;">xxx</var>."
In the Properties section, locate the NamespacePath line. You may have to double-click this line to see the whole line.
Copy the NamespacePath value to the clipboard. For example, copy the following value:
\\<var style="box-sizing:border-box;margin:0px;padding:0px;">server_name</var>\root\sms\site_<var style="box-sizing:border-box;margin:0px;padding:0px;">xxx</var>
reference via https://support.microsoft.com/kb/317872?wa=wsignin1.0
is it happening to all users remotely ? any changes or patches applied to the server ?
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

Cannot connect to the configuration database

I tried to configure my server with active directory after I have successfully configured sharepoint . For a mistake , they made me delete the active directory and now when I try to connect to the admin section or site page it me give the following error :
"Cannot connect to the configuration database"
Deleting the active directory ; I noticed that all the other users have disappeared and the service : SQL AGENT ( Sharepoint ) not run and the error is :
" This installation of SQL Server Agent is disabled. The edition of SQL Server that installed this service does not support SQL Server Agent." Thank you for the Help

Was the active directory server that you removed the last active directory server in the farm? If so then your only two real choices are to rebuild everything from scratch or restore everything from backup.
If it was just that you were trying to make the SharePoint server into a Domain Controller, then I still think you may need to rebuild. But you can try re-adding the SharePoint server to the Domain. It may have lost its Domain membership when you removed
AD from it and gone back to being a standalone server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Cannot connect to app store after downloading mountain lion

cannot connect to app store after installing mountain lion it says there is no network connection when there clearly is i am on the internet now and i had this problem with the bootcamp server i read that in another forum and the answer to remove the auto proxy setting was correct but not for this situation because it is allready unchecked i checked it and tried again still no connection please help .... oh and apple you are beginging to be more like windows/microsoft with all the problems

That poor wordpress site has collapsed in exaustion from trying to keep up with the 3mil hits a day
here is a "copied" version with credits for those looking for a solution to an annoying problem Apple should patch. (Yes, I'm aware of the irony of that statement)
July 18, 2012 · by Arthur Lockman · in Apple, Tutorials
After doing a reinstall of Lion a few weeks ago, I found that my computer suddenly would reject every VeriSign certificate that it encountered. Using Chrome, that meant that I couldn’t even access Twitter.com, because it thought that the certificate was wrong. I couldn’t login to the Apple developer portal, I couldn’t authenticate a device with XCode, I couldn’t make a purchase at Apple.com, I couldn’t download updates from the Mac App Store, and I couldn’t login to Mint.com, among other sites. I essentially couldn’t do anything that used a VeriSign certificate for SSL.
What did I do? I called my trusty AppleCare advisor, hoping for an answer. I thought that maybe they could help me figure it out. After getting to senior support, I was told to reinstall Lion, which I did to no avail. My case was then forwarded to the Apple engineering team, with 3 to 5 days to wait until I had an answer. I looked around, through my console logs and through Keychain access, and finally came up with an answer, and a solution to my problems.
It turned out that my solution was pretty simple. I had to delete a few files and reset one to its default setting.
Delete the files /var/db/crls/crlcache.db and /var/db/crls/ocspcache.db. These can be found using Finder’s Go >; Go To Folder menu (Cmd + Shift + G). This resets the cache of accepted certificates in the system. It doesn’t remove them, it just forces the system to rebuild the caches upon restart.
Open Keychain Access (/Applications/Utilities/Keychain Access). Select Certificates in the Category picker on the left side. In the search bar, type in the word Class. Look through that list, and find any certificates that have a blue + symbol over their icon. These are the ones you need to modify.
Select one that has a blue +, and hit Command + I. Click the disclosure triangle beside the “Trust” list to show the list of permissions. Now, what we need to do is to set this certificate to use the system defaults. However, for some reason, when you select it, it doesn’t save. So what you need to do is this. Under “Trust”, where it says “Secure Sockets Layer (SSL)”, change the dropdown menu to say “No Value Specified”. Then, close the window. It will ask for your administrator permissions. Then, open the info pane for that certificate again. Under “Trust” again, now set the dropdown that says “When using this certificate:” to say “Use System Defaults”. You can then close out of the info pane, and enter your password again. Do this for any of the certificates that have a blue + on their icon. There should only be one or two at most.
Restart your system.
This solution seemed to work just fine for me. All of my certificate problems have been fixed. It must be something with the OSX installer that causes this certificate issue. I’ll file a bug report. Hopefully someone looks into it and fixes the flaw in the OS. And, I hope that this fixed the flaw for you.
Addendum – a note on security:
This procedure won’t affect the security of your Mac. I’ve had some questions come in about that, and if anything, it makes it more secure because then sites that require SSL certificates can actually use them, unlike before where they might default to non secure connections because the certificate was bad.

Cannot connect to twitter on maveriks

Similar Messages

Maybe you are looking for