Cannot create new Service Application in Manage Service Applications in Central Administration

Hi!
I'm having problems with a new SharePoint 2013 Enterpise installation. The issue I'm having is is that if I navigate to Manage Service Applications and click on New I get nothing in the dropdown. If I use the wizard I can create new Service applications but
not through the Manage Service Applications page. Anyone know why? The button is not greyed out and I can click it but it doesn't show any service application at all (see picture).

Hi,
Based on your description, there is no service applications in the new dropdown list in SharePoint 2013.
Check things below:
Run the SharePoint products Configuration Wizard and then check if the same situation will occur.
Run Central Administration as administrator and then check the results.
According to your last post, it seems that there is something wrong about certificate.
How do you connect server through remote access? And check if it is the same situation when you create service application in SharePoint
server.
Best regards
Sara Fan
TechNet Community Support

Similar Messages

Create New Service Session at Solution Manager = Product System missing

We have installed SAP EHP 1 for SAP Solution Manager 7.0 last year but not really use it.
We have setup in the system landscape:
Server (ecc6sbx)
Databases (MCD)
Product System (MCD) => SAP ERP
Assigned them to logical component (eg ZECC6DEV)
RFC destination for MCD was generated
SDCCN Administration at solutions manager display MCD with SDCCN status in green color.
At the satellite system MCD, SDCCN Maintenance job was created and scheduled. Initial single run was also done.
There were no issue. Connection to SDCC_OSS was fine.
Back to the SOLUTION_MANAGER transaction, we created a new solution ECC ERP - Development.
In the Solution Landscape => Solution Settings, we have assigned the Logical Component into the System Group.
However when we expand the tree, and click on the Servers folder it did not display anything.
Click on the Product Systems also did not display anything.
We have another Solution Manager which display information on those Servers and Product Systems folder for satellite system.
Going back to the Solution Manager for the Solution ECC ERP - Development, I tried to Create New Service Session for EarlyWatch Alert. When I click on the Create button, I could only see SAP EarlyWatch Alert for Solutions, there is no SAP EarlyWatch Alert for the Reference Object MCD (<installation number). I could not create a session for MCD.
Does anyone have ideas what I am missing here? I am trying to attached a document which have print screen for reference while creating this message, but there is no such function here.
Adding to link to the document file contain print screen
[Wihtout System and EarlyWatch Selectable.doc|http://www.easy-share.com/1915633524/Wihtout System and EarlyWatch Selectable.doc]
[With System and EarlyWatch.doc|http://www.easy-share.com/1915633514/With System and EarlyWatch.doc]
Edited by: Steven Foo on May 24, 2011 8:00 AM
Edited by: Steven Foo on May 24, 2011 8:18 AM

Anyway, in the solution manger how to we setup earlywatch alert for the SM SID host itself (source system)?
I have the information on the below from our solution manger
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
I tried to go SDCCN on the solution manager itself and look at the Maintenance Service Definitions:
I get the information:
No suitable RFC Destination found in SDCCN settings.
When I click ok I get the following
No RFC destionation to source system of service definitions available
Delete Service Definitions (radio button selected).
I did not continue and cancel it as I did not want to delete anything.
I check the Task Processor background job is running at SM host itself.
I managed to get the Maintenance Package job running. However it failed with the following
Error refreshing service definitions from destination SM_SSMCLNT001_BACK
Source and target system may not be identical SSM
The source and target system is the same ==> SSM, will this be an issue?

Unable to create new services using the R3 replicated service categories

Hi All,
I have the following problem:
We have replicated the services from our R3 system to SRM (as well as the materials).
We also have an external system that will be creating new services and it will reuse the service categories from R3.
When I try to create a service online, I can only select the SRV_ category type. None of the others which do exist in COMM_CATEGORY are available (Like SRV_ALL, SRV_SERV,...). When I try to select them I get an error like:
"Product category SRV_ALL has a different product type to maintained product"
The problem doesn't exist for materials where I can use any of the MAT_* types.
I suspect that the settings in COMM_HIERARCHY transaction might have an impact. I can see that for MAT_ and all MAT_* the attribute product type has been set to "Product". Whereas for services I only see that SRV_ is set to "Service", all the other SRV_* type have no value set. According to SAP Help they would inherit the value from the parent which is SRV_, but perhaps this functionality doesn't fully work?
Now, I would like to get the value the product type attribute set to "service" for all SRV_* type, however in SRM I cannot edit them as the ECC system is the source. Does any one know if I can change some settings for the replication of the service types so that this attribute is set for all my service types during replication? Or any other solution?
Thanks in advance!
Lee

Anybody?

PowerPivot - SP2013 - Cannot create the service instance because the parent Service does not exist

Unable to setup PowerPivot using PowerPivot configuration tool.
I have One server which has SQL 2012 SP1 and SP2013.
The farm is configured with all service applications.
SQL has default instance with DB Engine and SSAS Tabular. Reporting Services has been configured using SharePoint mode and has a service application.
The Power Pivot instance is set up with DB Engine and the SSAS.
I keep getting this error. Ive tried so many times uninstalling, making sure features removed, rebuilding the farm (thank god for autospinstaller..)
11/07/13 12:06:17:6858 Verbose: CreateSystemServiceInstance.NeedsExecute
11/07/13 12:06:17:6858 Verbose: Running function IsFarmConfigured to check whether SharePoint is configured regardless of availability
11/07/13 12:06:17:6858 Verbose: Farm is configured
11/07/13 12:06:17:6858 Verbose: Entering function GetService(Guid)
11/07/13 12:06:17:6868 Verbose: Service is not installed.
11/07/13 12:06:17:6868 Verbose: Service instance not found in local server.
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.NeedsExecute(True)
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute(True)
11/07/13 12:07:41:5662 Verbose: CreateSystemServiceInstance.Execute
11/07/13 12:07:41:5682 Verbose: Entering function GetService(Guid)
11/07/13 12:07:41:5702 Verbose: Service is not installed.
11/07/13 12:07:41:5702 Verbose: CreateSystemServiceInstance.Execute(Skipped)
11/07/13 12:07:41:5702 High: Cannot create the service instance because the parent Service does not exist.
11/07/13 12:07:41:5702 High: Prerequisites check for execution failed. Farm is not in a valid state.

Did you install the PowerPivot add-in for SharePoint? There are 2 parts to this - the SQL Server Power Pivot for SharePoint which is the Analysis Services instance running in Tabular Mode and the PowerPivot Add-in. The last line in your error message seems
to tell you that you have a missing component in the farm, possibly the PowerPivot Add-in
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Cannot create Proxy service with JCA transport

Hello everyone.
I have some issues while trying to create ftp service with jca transport. I follow the instruction in this tutorial:
http://blogs.oracle.com/MarkSmith/entry/osb_and_ftp_adapter_in_11g
I stuck in Step 4, cannot create proxy service to use JCA file that I created by JDeveloper 11g (11.1.1.5). When I specify jca file for proxy service, a error message returned:
<ALSB Console> <BEA-494002> <Internal error occured in OSBConsole : Transport exception occurred with the following message:
Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties.And these are my jca file content that created by JDeveloper:
<adapter-config name="myJCA_FTP_service" adapter="FTP Adapter" wsdlLocation="myJCA_FTP_service.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/ftp/MyFtpAdapter"/>
<endpoint-interaction portType="Put_ptt" operation="Put">
    <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
      <property name="PhysicalDirectory" value="/home/FTP-shared/upload"/>
      <property name="FileType" value="ascii"/>
      <property name="Append" value="false"/>
      <property name="FileNamingConvention" value="osb_%SEQ%"/>
      <property name="NumberMessages" value="1"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>Is there anyone who had tried to use JCA transport with Ftp adapter already? Please give me a suggestion.
Any response is appreciated
Regards, Cuong Pham

To get to the basics.
You use GET to read files from an FTP location - This can be done by an OSB proxy service only.
You use PUT to write files to an FTP location - This can be done by an OSB business service only.
So forget that you need a proxy service for PUT.

Creating new services using ORADIM utility

Hi,
i have Oracle 11g R1 on windows XP service pack 3 platform.
i am having some issue while creating new services using ORADIM utility.
The Errors are:
18:13:28 SYS@vik 24-MAY-11> host oradim -delete -sid vik
Instance deleted.
18:13:52 SYS@vik 24-MAY-11> host oradim -new -sid vik -intpwd oracle -startmode A -maxusers 100 -pfile D:\app\vikash.chauradia\product\11.1.0\db_1\database\initvik.ora -timeout 60
OPW-00005: File with same name exists - please delete or rename
Instance created.
Error while deleting value, OS Error = 2
Can anyone please help me to fiinf the solution?
Thanks and regards,
Vikash Chauradia(DBA Trainee)

Vikash Chauradia(Junior DBA) wrote:
Hi,
i have Oracle 11g R1 on windows XP service pack 3 platform.
i am having some issue while creating new services using ORADIM utility.
The Errors are:
18:13:28 SYS@vik 24-MAY-11> host oradim -delete -sid vik
Instance deleted.
18:13:52 SYS@vik 24-MAY-11> host oradim -new -sid vik -intpwd oracle -startmode A -maxusers 100 -pfile D:\app\vikash.chauradia\product\11.1.0\db_1\database\initvik.ora -timeout 60
OPW-00005: File with same name exists - please delete or rename
Instance created.
Error while deleting value, OS Error = 2
check for the files in ORACLE_HOME/database. You have dropped existing instance and creating service again, move all the files to other folder then create using ORADIM

BO4 - cannot create new universe connections

Hi,
In Universe Design Tool, trying to create new universe connections but not allowing this.
Doesn't show all the data access drivers we have installed.
Can migrate connections fine from XIR2 fine and reports run O.K
Why cannot create new universe connections
Many Thanks

Hi,
there are some notes about this in the knowldge base. Here are a couple:
For ODBC, Note 1272557 - Data Access Drivers missing while creating a new connection in Designer
for JDBC, Note 1481410 - JDBC Drivers do not appear in the List Of Drivers when Creating a New Universe Connection in Universe Designer
Can you hit www.service.sap.com/notes to look them up?
Regards,
H

Error in Creating New Web Application SharePoint 2013

Everything was working fine but today when i try to create a new web application i am getting the following error.It's happening whenever i am trying to create a new web application.
The directory C:\inetpub\wwwroot\wss\VirtualDirectories\26060 is already being used by another IIS Web Site. Choose a different root directory for your new Web application.
But this port 26060 was not being used before and if i try to create new web application again then the error message occurs with the port number of the new web application.
Please help.

Hi HelloFragrance,
Are you using a host header when creating these web apps? If so have you tried creating without a host header? Also are you logged in with the Server with the Admin account? Check this out: (taken from Jeremy Taylor's
blog)
" 1. Ensure you have a proper dns name / entry in the hosts file of your server for the new url you are wanting to create.
2. Ensure you have typed in the ‘host header’ typed in when creating the new web application.
3. If this doesnt work, open IIS Manager – Start>run> inetmgr> and verify the home directory – it could be located on a different drive."
Also have you tried creating through Powershell and see if you run into the same issue or not?
http://technet.microsoft.com/en-us/library/ff607931(v=office.15).aspx
Hope this helps!
Thanks!
BlueSky2010
Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and
"Mark As Answer"

Cannot Create New Mailbox

Hi all,
First of all I already create a similar thread : http://social.technet.microsoft.com/Forums/en-US/b8f88745-ca79-43f9-8857-3b87781e5c19/rbac-to-create-mailbox?forum=exchangesvradmin
I got a problem in my Exchange Server 2013 environment. I cannot create new mailbox (new user) from ECP. But I can create new mailbox and choose existing user.
Active Directory operation failed on DC.mydomain.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031A121F, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
already try with no luck :
re-inherit the permission.
setup /prepareAD
I create new user and assign Org Management & Domain Admin
how to check whether the permission in my AD is correct ? or any idea should I start troubleshooting ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

solved by executing setup.exe /preparedomain
and I found one of the server in container ADSIEdit were disabled inheritance. execute setup.exe /prepareAD, reboot the server (because it
ask for it), then execute setup.exe /preparedomain
cheers ! :)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

AME iExpenses: Cannot create new approver group

We need to set up approver groups for iExpenses. I assigned myself Approvals Management Administrator and Aprovals Management Business Analyst roles. With these roles I can create new attributes and conditions. However, I cannot create new action types and approval groups. The create button for the approval group just does nothing.
What am I missing? We are 11.5.10.2, AME.B

Pl see if ML Doc 420387.1 (How to Create the Approval Transaction Type for AME.B or higher ?) can help
HTH
Srini

Runtime error and unable to create new web application

Hi
when i create new web application i faced this error Runtime error and unable to create new web application.
in this farm we have
2 wfe servers
2 application servers.
adil

Adil,
There could be many reason like IIS issue, Space issue, Permission issue, SQL issue which is not possible us to guess rather
you need to jump in the SharePoint log(Program Files\Common files\Microsoft Shared\Web Server Extensions\14\LOGS) and find out the specific error log its throwing after which trouble shoot can be start.
You can refer few similar threads here -
Link
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Cannot create new folders in Outlook

I just bought a new PC computer. I installed MSFT Office Professional Plus 2010. I opened Outlook and added in (i) the pst folder I had set up from my previous Vista
computer (also with Outlook 2010), (ii) my hotmail account, (iii) my at&t/yahoo account and (iv) my gmail account. I cannot create new folders in any of them.
When I right click anywhere in the navigation pane and select "New Folder..." I get the following error message:
"Outlook cannot read the registry information.
-Close and restart Outlook.
-Reinstall Outlook
-Reinstall Microsoft Exchange or other e-mail system."
I tried all three, including removing and reinstalling Office and removing all of the email accounts/pst files and re-adding and still have the problem.
If I try to right-click properties on any of the accounts, I get the same error message, with the following additional language first:
"Cannot display 'General' page. This page will remain visible, but is not available."
Not sure what is left to try.
Appreciate any ideas.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, If the PC from clean install, you can follow these steps to test this issue.
1.
Start the Outlook in safe mode,
Press and hold the CTRL key,
and then click Outlook.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
2.
Create a New profile & PST file to test this issue
If this problem does not occur in the new Outlook profile & PST, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
3.
Make sure the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
key permissions to allow full permissions to all users
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  How
to back up and restore the registry in Windows
a)
Exit Outlook if it is running.
b)
Click
Start, and then click Run. Copy and paste (or type) the following command in the
Open box, and then press ENTER: regedit
c)
Locate and select the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
d)
On the
Edit menu, click Permissions.
e)
Click the registry key for the user who is currently logged on, and ensure that
Read and Full Control permissions are both set to
Allow.
f)
Click the Advanced button, ensure that the user who is currently logged on is selected, that
Full Control is listed in the Permissions
column, and that This Key and Subkeys is listed in the
Apply to column.
g)
Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box, and clear
the check box
Windows 7: Include inheritable permissions from this
object’s parent
Windows XP: Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
h)
When you are prompted to continue, click Remove.
i)
Click Apply, and then click Yes when you are prompted to continue.
j)
Click OK, and then click OK again.
k)
On the Registry menu, click Exit.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Cannot create new folder?

I have just moved to a new hosting and have connected to it
and I can edit files. When I try to add a folder to the remove I'll
get
"An FTP error occured - cannot create new folder .
Access denied. The file may not exist or there could be a
permission problem".
Any idea?

Hi,
Did you make any changes before the issue appears?
Before going further, you may try the
system restore to go back to a previous status and check the result.
Tracy Cai
TechNet Community Support

After upgrade to 6.3.4 cannot create new bookmarks by dragging nor open existing bookmark properties

Just upgraded to 3.64. Now I cannot create new bookmarks either by dragging a URL or trying to create a new one in organize bookmarks. For existing bookmarks when I hit properties on the pop up menu all I get is a title bar that says "bookmark properties for (name of bookmark)" but I can't resize it or otherwise manipulate the title bar to access information or change the properties

Hello Victor.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

HT5577 i bought recently a second hand apple i phone 4s but now i cannot creat new apple id

i bought recently a second hand apple i phone 4s but now i cannot creat new apple id .

I suspect you're referring to the 3 free iCloud account limit on an iOS device. If so, there's no way around this. Once that limit is reached, you'll have to create the iCloud account on another iOS device or computer, then setup that account on your phone.

Cannot create new Service Application in Manage Service Applications in Central Administration

Similar Messages

Maybe you are looking for