Cannot Custom Codec on RedHat ES3 Update 3

I want to custom my Codec Chain in a test program with the following line of code
<Processor >pro1.setContentDescriptor(new ContentDescriptor(ContentDescriptor.RAW));
TrackControl[] controls=pro1.getTrackControls();
controls[1].setCodecChain(new Codec[]{new com.sun.media.codec.video.vh263.NativeDecoder(),//H263->YUV
new StorageCodec()});
The program run fine on Windows XP but when I run on RedHat ES3 Update 3. It throw the following exception
Failed to realize: com.sun.media.ProcessEngine@40db4d7
Cannot build a flow graph with the customized options:
Unable to add customed codecs:
com.sun.media.codec.video.vh263.NativeDecoder@4095d9e
StorageCodec@4095ddc
Error: Unable to realize com.sun.media.ProcessEngine@40db4d7
I have tried to remove my presonal Codec "Storage Codec" but it still throw the similiar Exception
Do anyone give me hint on what happening on Linux.
Thanks in advance.
I can provide source code for detail evaluation.

Similar Messages

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". I've quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. HELP

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". As well as reloading, I've also quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. please help.
System: Mac OSX 10.9.4. 3.4ghz intel core i7, 8gb ram

Hello,
Adobe has brought these new links in this matter:
Troubleshoot Creative Cloud download and install issues and
App doesn’t open; progress wheel spins continually
Please have a look there. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter

Can't make a workable custom codec with ProRes 422 (HQ)

I've only just now found that there is a Support Community for Compressor. Wish I'd known sooner.
I see my version of Compressor is 3.5.3.
I've been on a little saga.
I started out with the challenge of converting some MP4 files from a Blackberry Playbook into ProRes 422 (HQ) for editing in Final Cut. I used Compressor and the task looked fairly straight forward. I used the ProRes setting in the Compressor, converted my files and imported them into Final Cut. Video was fine but I soon found out that the audio needed rendering every time I put a clip into the Timeline. I went on-line to various chat rooms with this problem. Pretty soon a fellow was telling me that the ProRes 422 (HQ) setting in Compressor had "Audio Pass-through" as default and that this was the cause of my problem. Change it, he said, to "Linear PCM".
It took me a fair while to figure out that the ProRes setting in Compressor did not allow itself to be modified and that I'd have to create a custom preset if I was to make these changes. I set about to do that. I was able to select "QuickTime Movie" and then in "Video/Settings" choose "ProRes 422 (HQ)", in "Audio", "Linear PCM". This did solve the audio problem. Now files imported into Final Cut did not need rendering. But another problem became evident.
Whereas the ProRes 422 setting that came with Compressor in its summary page listed: "Width" and "Height" as "(100% of source)", the custom ProRes 422 (HQ) setting I'd just created has "Width" and "Height" as "320" and "240". In short the 19:9 aspect ratio of the original footage was lost. What I got both in the conversion and in Final Cut was a squished SD image.
I've played like heck with Compressor trying to see if there was some place I could get this custom version of ProRes to correspond to the aspect ratio seen in the Audio Pass-through version that came loaded in Compressor. No luck. All very mysterious.
My next step was to look to create another custom codec that would have the proper 1280 X 720 ratio. Turns out "HDV 720p 30fps" does, so now I've been converting to that. Looks fine in Final Cut - proper picture and sound.
I've been playing around a bit more and see now that I can create a custom setting using "Apple Intermediate Codec". I've tried it and it works too.
So after all this, my question: Should I be using that codec instead? Or does it really matter what codec I use for editing? Is the only real issue what codec I decide to use to output?
And while I'm at it: Does anybody have ideas why trying to create a custom setting with ProRes 422 (HQ) does not work - for my purposes at least.
I must admit this converting codecs is pretty new to me. Hopefully with time this experience will get easier and clearer.
John

Setting a Compressor ProRes Custom Setting:
1) Pick Apple ProRes 422...
2) Drag the PreRes 422 setting to the Bach Window. You can only make a custom setting from the Batch Window...
3) Select enable for the audio. Click on setting to make sure it is set right. Uncheck Allow Job Segmenting... Make sure Streaming is set to none*....
4) Select the Geomenty tab... Pick Custom (16:9):
5) Click Save As and name your custom setting...
6) You new custom setting will show up in the Custum folder for later use:
Another thing you can do is make Droplet of this custom setting. Menu... File... Create Droplet... Save the Droplet into a folder somewhere on your computer.
A Droplet will start the transcoding automatically. Drag the Droplet onto a video icon and let it do it's job.
* ProRes doesn't need the Fast Start setting. If this is set it will take almost twice as long to do the encoding. Same with Allow Job Segmenting using Qmaster.
I did the above on the fly and hope everything is clear for you to understand.

When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id, I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.

When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id, I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.

Finally got through to tech support and found someone who seemed to know what was going on, he walked me through and using appleid.applesupport got me to a point where i could get a new password for the apple id that kept showing up.
I think you were on the right trail and I want to say thanks for your help. Much appreciated
ccl43

In the latest version of Pages (5.0) I cannot find the refresh button to update a chart copied from Numbers (also latest version 3.0). Can anyone help?

In the latest version of Pages (5.0) I cannot find the refresh button to update a chart copied from Numbers (also latest version 3.0). I saved my Numbers document before copying to Pages. Can anyone help?

I think you identified my mistake. I confused tables-charts-graphs. I was wanting a "table" of cells (numbers) to be added to the Pages document. Is there no way to do that and keep the tables linked between Numbers09 and Pages09?
An example would be a Numbers spreadsheet calculating a number (say, a product price) and that number (data) be linked to a product information text in Pages.
I just recently saw the Merge function in Pages, but have not yet learned how that works. I don't use Pages much at all but it would come in handy for creating to information sheets about products --- with the product pricing being updated from a Numbers spreadsheet.
If you have any hints on how that can be done or where I can find info on that I would appreciate it.
Thanks for catching my misunderstanding.
Bill

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....

Cannot print from web sites after update to FF 7.0.1

cannot print from web sites after update to FF 7.0.1
Printing from my email account (Cox) is OK
System Windows Vista

When my wife updated Firefox to version 7.0.1 she was no longer able to print items from the web such as coupons. She can print from her email (Cox) account.
She is running Vista.
When I updated to Firefox 7.0.1, I did not have a problem. I am running Vista also.
Tried using the Firefox help page but no help so far.
I did notice that on her computer in the "Plugins" for Firefox that HP Smart Web Printing is now disabled and is not compatible with Firefox 7.0.1. She had no problems until she did the update.

FD33 - Receivable Field in Customer master is not getting updated

FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
How can I control the general FI documents having various FI documents type as relevant to credit check?

Apart from the above,please also check the below:
FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
Any way coming into query not updating the receivables, please check the below points once again.
1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
2. Even if the above all points are checked including above all posts,then also still the same issue repeating then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
thanks,
Srinu.

FCPX, Motion5, Compressor4 won't open after ProApps Codecs v1.0.5 update?

When I try to open either of these 3 apps the system tells me they can't open because they are currently being updated. Software Update shows my system as needing no update. The last update that it shows was for ProApps Codecs v1.0.5. I am running a macbook pro / OS 10.9.3.
The manual download for that update, (ProApps Codecs v1.0.5), is a dead link, (http://images.apple.com/support/not_found.html).
I have one of the new black mac desktops with the exact same setup as my laptop. It's software updates list shows an update for the 3 apps I am having trouble opening on my laptop as having successfully installed. All 3 apps are working fine on the desktop system.
Anyone know how to either:
- trash my preferences on the laptop to force system update to reinstall the ProApps Codecs v1.0.5 update?
- fix the broken link at support.apple.com so I can manually install the ProApps Codecs v1.0.5 update?
- or perform some kind of Voodoo that will get my FCP, Motion, and Compressor opening again?

In the App Store, pull down the Store menu and ‘Check for Unfinished Downloads…’

HT1600 I want to update my Apple TV software but cannot find the recommended Settings General Update Software sequence?

I want to update my Apple TV software but cannot find the recommended Settings>General>Update Software sequence?

Start here

I cannot power charge for iP4s after update iOs 8

I have used iPhone 4s 16GB after I update iOs7 I cannot charge battery.
I cannot charge power when iP running , I have to close iP then plug adapter ,the power in.
The staff of iStudio recommend me to update iOs 8 but I cannot charge iP by adapter after update iOs8.
Now I can charge by USB via my computer but iTune cannot connect with my device.
Could you have any recommendation?

Same here. Issue is on both Apple TV's and iphone. Resetting everything did not fix the issue. Rebooting modem did not fix the issue. PLEASE FIX NOW. Take the thousands of dollars I've spent on movies, music & hardware and at least update the services page to accurately show that iTunes Store is indeed having issues! Thanks!

Why I cannot use SIRI in Japanese after updated to ios 5.1?

Why I cannot use SIRI in Japanese after updated to ios 5.1?
I can see the language is there but it doesnt work

Check your settings to make sure Siri is actually enabled. Sometimes I find that Siri will disable during the updating process. Oh, and it should be iOS 6.0 not 6.1. 6.1 doesn't exist...yet.

Complex types arrays in webservices using custom codec

In WLS8.1, I use the arrays serializing classes generated by the "servicegen" task,
for the arrays of a complex type, and I register to the TypeMapping registry
the complex type specifying as serializer/deserializer the custom codec that I
developed. (The custom codec extends the AbstractCodec class)
The problem occurs when I try to execute a service that has like return type an
array of my complex type. In fact the response envelope is incorrectly built,
containing before the tag result(that includes at his turn, the serialized array)
once again the array serialized.
So at the parsing time of the envelope, the following error occurs:
… But was not able to find a Part that is registered with this Message which corresponds
to this SOAPElement. The name of the element should be one of these[simpleTypeBDTs]
at weblogic.webservice.core.DefaultMessage.toJava(DefaultMessage.java:445)
at weblogic.webservice.core.handler.InvokeHandler.handleRequest(InvokeHandler.java:74)
at weblogic.webservice.core.HandlerChainImpl.handleRequest(HandlerChainImpl.java:125)
at weblogic.webservice.core.DefaultOperation.process(DefaultOperation.java:513)
at weblogic.webservice.server.Dispatcher.process(Dispatcher.java:150)
at weblogic.webservice.server.Dispatcher.doDispatch(Dispatcher.java:125)
at weblogic.webservice.server.Dispatcher.dispatch(Dispatcher.java:74)
at weblogic.webservice.server.WebServiceManager.dispatch(WebServiceManager.java:98)
at weblogic.webservice.server.servlet.WebServiceServlet.serverSideInvoke(WebServiceServlet.java:274)
at weblogic.webservice.server.servlet.ServletBase.doPost(ServletBase.java:393)
at weblogic.webservice.server.servlet.WebServiceServlet.doPost(WebServiceServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6291)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:97)
java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException: Exception
during processing: javax.xml.soap.SOAPException: Found SOAPElement
that seems to be normally because the encountered tag is not the result tag like
expected, but the starting tag of the first element of the resulted array.
It’s the correct way, the way I used? For my complex type is imperative to use
a custom codec, because my complex types are the nested complex types.

I opened a case to bea support, (case 426018 ) but I didn't obtain the solution
till now.
If you can access the case at the support.bea.com site, it contains a simple
test case explaining my problem.
regards,
mihaela
"manoj cheenath" <[email protected]> wrote:
In fact the response envelope is incorrectly built,
containing before the tag result(that includes at his turn, the serializedarray)
once again the array serialized.I suspect this is due to a bug in 8.1 and it is fixed since. Please
contact support for a patch.
For my complex type is imperative to use
a custom codec, because my complex types are the nested complex types.WLS can handle nested complex types. You need not write
custome codec to handle this case.
Regards,
-manoj
http://manojc.com
"miki tirnacop" <[email protected]> wrote in message
news:[email protected]...
In WLS8.1, I use the arrays serializing classes generated by the"servicegen" task,
for the arrays of a complex type, and I register to the TypeMappingregistry
the complex type specifying as serializer/deserializer the custom codecthat I
developed. (The custom codec extends the AbstractCodec class)
The problem occurs when I try to execute a service that has like returntype an
array of my complex type. In fact the response envelope is incorrectlybuilt,
containing before the tag result(that includes at his turn, the serializedarray)
once again the array serialized.
So at the parsing time of the envelope, the following error occurs:
. But was not able to find a Part that is registered with this Messagewhich corresponds
to this SOAPElement. The name of the element should be one ofthese[simpleTypeBDTs]
atweblogic.webservice.core.DefaultMessage.toJava(DefaultMessage.java:445)
atweblogic.webservice.core.handler.InvokeHandler.handleRequest(InvokeHandler.j
ava:74)
atweblogic.webservice.core.HandlerChainImpl.handleRequest(HandlerChainImpl.jav
a:125)
atweblogic.webservice.core.DefaultOperation.process(DefaultOperation.java:513)
at weblogic.webservice.server.Dispatcher.process(Dispatcher.java:150)
atweblogic.webservice.server.Dispatcher.doDispatch(Dispatcher.java:125)
at weblogic.webservice.server.Dispatcher.dispatch(Dispatcher.java:74)
atweblogic.webservice.server.WebServiceManager.dispatch(WebServiceManager.java
:98)
atweblogic.webservice.server.servlet.WebServiceServlet.serverSideInvoke(WebSer
viceServlet.java:274)
atweblogic.webservice.server.servlet.ServletBase.doPost(ServletBase.java:393)
atweblogic.webservice.server.servlet.WebServiceServlet.doPost(WebServiceServle
t.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1053)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:387)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:305)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:6291)
atweblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubjec
t.java:317)
atweblogic.security.service.SecurityManager.runAs(SecurityManager.java:97)
java.rmi.RemoteException: SOAPFault:javax.xml.rpc.soap.SOAPFaultException: Exception
during processing: javax.xml.soap.SOAPException: Found SOAPElement
that seems to be normally because the encountered tag is not the resulttag like
expected, but the starting tag of the first element of the resultedarray.
It's the correct way, the way I used? For my complex type is imperativeto
use
a custom codec, because my complex types are the nested complex types.

Help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen

help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen.
pls help me recognize my iphone4 to itunes and bring back my iphone 4 the way it was before. THANKS!

Hi my iphone 4 is also having the same problem of hanging with the same screen reflected. itunes keep suggesting me to do a restore setting but it fails to restore after running half way. Have u solved your problem ardy..? Hw can i / we do about it...?

Cannot insert more than 1 WSUS update source with different unique ids

Hello LnG
I am aware that are a whole bunch of forum threads on this error however little bit of additional help would be of great help, as I have nearly tracked this 'pain' down.
Our environment: SCCM 2007 R3
1 Central
15 Primaries and a whole bunch of secondaries
Single WSUS server
OK, so we have just taken handover of this new account and still getting a hang of the creek and corners in the environment. We have about 1000 machines sitting in "Failed to download updates" state. Error
= 0x80040694
WUAHandler.log:
Its a WSUS Update Source type ({A2762CA9-9739-4260-9C3A-DC4B36122E16}), adding it
Cannot insert more than 1 WSUS update source with different unique ids
Failed to Add Update Source for WUAgent of type (2) and id ({A2762CA9-9739-4260-9C3A-DC4B36122E16}). Error = 0x80040694.
Its a WSUS Update Source type ({BCB9D60B-2668-459B-BFFD-6DDD11AADC53}), adding it
Existing WUA Managed server was already set (http://WSUSServername:8530), skipping Group Policy registration.
Added Update Source ({BCB9D60B-2668-459B-BFFD-6DDD11AADC53}) of content type: 2
WUAHandler
Async searching of updates using WUAgent started.
Checked the
CI_UpdateSources table and found 2 Update sources unique ids:
{BCB9D60B-2668-459B-BFFD-6DDD11AADC53} Date Created 2011-01-11 03:47:52.000/Date Modified 2011-01-11 03:47:52.000
and
{A2762CA9-9739-4260-9C3A-DC4B36122E16} Date Created 2014-07-09 02:48:46.000 / Date Modified 2014-07-09 02:48:46.000
My questions:
Can I rely on the last modified/created date for inactive update source and delete it off the database? in this case can I delete {BCB9D60B-2668-459B-BFFD-6DDD11AADC53}?
When i browsed to the registry location on the Central Server
HKLM\Software\Wow6432Node\Microsoft\SMS\Components\SMS_WSUS_SYNC_MANAGER i saw the update source as {BCB9D60B-2668-459B-BFFD-6DDD11AADC53}.
Does it imply that a stale record?
Any help/guidance will be much appreciated :)

Well!! My wsyncmgr.log says this:
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX1 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX2 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX3 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX4 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX5to 1
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX6 to 18
So, this is an active update source! ?? I cannnot uninstall and reinstall SUP currently. Any thoughts?? Any ody?

Cannot Custom Codec on RedHat ES3 Update 3

Similar Messages

Maybe you are looking for