Cannot determine the ipaddress using the ifconfig command
cannot determine the ipaddres of solaris OS. I have my oracle db installed on Solaris OS using vmware.
But I cannot determine the ipaddress using the ifconfig command.
My native OS is windows vista enterprise. I want to connect my database installed on solaris OS on a vmware machine through TOAD
Native OS:windows vista enterprise
Toad :10.5
OS:solaris 10
vmware version:6.0.4
Database:10.2.0
Pasting the details below.
# ifconfig
usage: ifconfig <interface> | -a[ 4 | 6 | D ][ u | d ][ Z ]
[ <addr_family> ]
[ <address>[/<prefix_length>] [ <dest_address> ] ]
[ set [ <address>][<prefix_length>] ] [ <address>/<prefix_length>] ]
[ destination <dest_address> ]
[ addif <address>[/<prefix_length>] [ <dest_address> ] ]
[ removeif <address>[/<prefix_length>] ]
[ arp | -arp ]
[ auto-revarp ]
[ broadcast <broad_addr> ]
[ index <if_index> ]
[ metric <n> ] [ mtu <n> ]
[ netmask <mask> ]
[ plumb ] [ unplumb ]
[ preferred | -preferred ]
[ private | -private ]
[ local | -local ]
[ router | -router ]
[ subnet <subnet_address>]
[ trailers | -trailers ]
[ token <address>/<prefix_length> ]
[ tsrc <tunnel_src_address> ]
[ tdst <tunnel_dest_address> ]
[ auth_algs <tunnel_AH_authentication_algorithm> ]
[ encr_algs <tunnel_ESP_encryption_algorithm> ]
[ encr_auth_algs <tunnel_ESP_authentication_algorithm> ]
[ up ] [ down ]
[ xmit | -xmit ]
[ modlist ]
[ modinsert <module_name@position> ]
[ modremove <module_name@position> ]
[ group <groupname>] | [ group ""]
[ deprecated | -deprecated ]
[ standby | -standby ]
[ failover | -failover ]
[ zone <zonename> | -zone ]
[ usesrc <interface> ]
[ all-zones ]
or
ifconfig <interface> | -a[ 4 | 6 | D ] [ u | d ]
auto-dhcp | dhcp
[ wait <time> | forever ]
[ primary ]
start | drop | ping | release | status | inform
when i give the command ifconfig -a, it is only showing the inet address
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
Thanks in advance
Edited by: user13364377 on Aug 21, 2010 12:13 PM
user13364377 wrote:
cannot determine the ipaddres of solaris OS. I have my oracle db installed on Solaris OS using vmware.Then it is not configured... I mean, if the ifconfig command does not return an interface and IP address, then surely the initial reaction should be "+oops, I made a config error+" and not "+bug/error!! wtf is going on!?+".
Similar Messages
-
How do I determine what is using the most memory.
The hard disk memory is filling up and I was wondering what is the best way to determine what is using the most memory. Is there a way to show a graph of how the memory is used. Like on my ipod. When I am checking the memory, it will show how much is music, and how much is applications and so on.
Also, I seemed to have lost the "all movies" in the list to the left when the hard disk is opened. It still shows the all imagess, and all documents but the all movies is gone.
Thank you for any help
MarcoTry Grand Perspective or OmniDiskSweeper - CNet Downloads or MacUpdate.
Just for future reference space on a hard drive is called, "storage," not "memory." Memory refers to the installed RAM in your computer.
Open Finder Preferences from its Finder menu. Click on the Sidebar icon in the toolbar. Check the box for your missing item. -
Currently, I cannot copy and paste using the icons in the toolbar. How do I enable this?
I am trying to make edits to a website for our company. Currently, I cannot copy and paste using the icons in the toolbar. Instead, I have to use control+c and control+v which doesn't always work. How do I enable the feature to be able to use the icons?
Are those toolbar buttons grayed?
Do the entries in the Edit menu look enabled if there is text selected or text on the clipboard?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
How do I determine what is using the data on my iphone 5c?
In looking at our bill we have one person that is using almost triple the amount of data that the other users are, and we need to figure out exactly what it is that is eating all of the data on his phone as he doesn't have any clue what it could be. Any help to determine what is using the data on an iphone 5c?
emilyki, look no further. We can help you look into this data usage issue. First of all, we recommend that you disable data for a few applications on that iPhone 5C device to ensure that the applications are not depleting data from your allowance when not in use. You can do this by tapping Settings>Cellular>Scroll down to all the downloaded applications and disable data for applications.
Additionally, you also have the option of disabling data in Settings>Cellular when you're not using data or connected to Wi-Fi.
Lastly, you may view the data usage sessions for that line online at My Verizon to determine when data is used the most. http://bit.ly/xB4iTc Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport -
Cannot attach multiple photos using the ' Message ' option iOS 5.0.1 in ' Photos ' app.
Since i have updated my iPhone 4 to iOS 5.0.1 i cannot attach multiple photos using the ' Message ' option in the ' Photos ' app.
i browse my photos and then select ' Message ' on a photo. i am then able to attach the first image to the message.
When i then select the Camera icon on the created message to add another image , either ' Choose existing ' or ' Take Photo or Video ' , it does nothing and takes you back to your existing message.
I am able to attach multiple images when accessing the iMessage app it is just from the Photos app it is occuring
is anyone else having the same issue ?You can submit the feedback to Apple here:
http://www.apple.com/feedback -
I cannot determine how to utilize the voice function while in the fitness mode. On one or two occassions it worked but I do not know how it was activated. It gives a voice summary and new summary screen for the workout.
Hi shiva
Thanks for your help,
Can you check this coding and revert me back ASAP Please.
REPORT BDS_GOS_CONNECTION.
DATA : logical_system LIKE BAPIBDS01-log_system.
CLASSNAME LIKE BAPIBDS01-CLASSNAME
OBJKEY LIKE SWOTOBJID-objkey.
PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
pa_class like BPIBDS01-CLASSNAME,
pa_objkey like swotobjidobjkey.
AT SELECTION-SCREEN.
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
EXPORTING
bor_id = bor_id
IMPORTING
logical_sytem = pa_lo_sys.
classname = pa_class.
objkey = pa_objkey.
EXCEPTIONS
no_objects_found = 1
internal_error = 2
internal_gos_error = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
clear v_attno1.
i_object1-typeid = 'BUS2012'.
i_object1-catid = 'BO'.
i_object1-instid = i_yItem-docno.
call method cl_gos_attachment_query=>count_for_object
exporting
is_object = i_object1
ip_arl = space
receiving
rt_stat = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
move wa_stat1-counter to v_attno1.
endif.
CALL METHOD cl_gos_attachment_query=>count_for_object
EXPORTING
is_object = object
ip_arl = space
RECEIVING
rt_stat = lt_stat.
READ TABLE lt_stat INDEX 1 into ls_stat.
count = ls_stat-counter.
*The object has to be a concatenation of your document, like this:
CONCATENATE object-instid tab-gjahr INTO object-instid.
ELSE.
CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
object-instid.
ENDIF. -
Cannot create a server using the selected type
Hi,
I'm trying to integrate tomcat 6.0 with Eclipse. But when I try to add Tomcatv6.0 Server,
it is sowing an error message " Cannot create a server using the selected type ".
Can anyone tell me why?
Thanks in advanceIn order to solve the problem you need to
* close eclipse
* go to ~/workspace/.metadata/.plugins/org.eclipse.core.runtime/.settings
* remove the files org.eclipse.wst.server.core.prefs and org.eclipse.jst.server.tomcat.core.prefs
* solve the problem with the permissions of the policy files or the personal instance of tomcat6
* start eclipse
In order to be able to use the tomcat6 server the proper solution is to have a personal instance of the tomcat6 server as described in the section "Advanced Configuration - Multiple Tomcat Instances" of the file RUNNING.txt (and the problems that have been reported about this ;-) )
My configuration: Debian/Sid, Eclipse 3.4.1. Ganymede
george -
I cannot change the volume using the keyboard of my Macbook. I have to go into preference. How to come back to the keyboard controler.
1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone
Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage.
-
Determine the profile using the Authorization class?
Hi All,
How can i determine the profile using the authorization class?
Does anybody know which table and and field?
Regards,
LukeHi ,
try with these tables
agr_users
agr_1250
usr21
Pls let me know if you still need any more help.
Thanks and regards,
Rajeshwar. -
How to update the iTunes in the iPad using the I pad
How to update the iTunes in the iPad using the I pad?
Then you cannot update without Conecting to iTunes on a computer.
The Over the Air Feature is only available on iOS 5 or later.
You have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
Chat Applet using RMI .... trouble running the Applet using the IE browser.
Hi,
I'm trying to run a chat application using RMI technology. Actually, this wasn't created from the scratch. I got this one from from the cd that comes with the book I bought and I did some refinements on it to suit what I wanted to:
These are the components of the chat application:
1. RApplet.html - invokes the applet
html>
<head>
<title>Sample Applet Using Dialog Box (1.0.2) - example 1</title>
</head>
<body>
<h1>The Sample Applet</h1>
<applet code="RApplet.class" width=460 height=160>
</applet>
</body>
</html>
2. RApplet.java - Chat session client applet.
import java.rmi.*;
import java.applet.*;
import java.awt.event.*;
import java.awt.*;
import java.io.*;
import java.rmi.server.*;
//import ajp.rmi.*;
public class RApplet extends Applet implements ActionListener {
// The buttons
Button sendButton;
Button quitButton;
Button startButton;
Button clearButton;
// The Text fields
TextField nameField;
TextArea typeArea;
// The dialog for entering your name
Dialog nameDialog;
// The name the server knows us as
String privateName;
// The name we want to be known as in the chat session
String publicName;
// The remote chats erver
ChatServer chatServer;
// The ChatCallback
ChatCallbackImplementation cCallback;
// The main Chat window and its panels
Frame mainFrame;
Panel center;
Panel south;
public void init() {
// Create class that implements ChatCallback.
cCallback = new ChatCallbackImplementation();
// Create the main Chat frame.
mainFrame = new Frame("Chat Server on : " +
getCodeBase().getHost());
mainFrame.setSize(new Dimension(600, 600));
cCallback.displayArea = new TextArea();
cCallback.displayArea.setEditable(false);
typeArea = new TextArea();
sendButton = new Button("Send");
quitButton = new Button("Quit");
clearButton = new Button("Clear");
// Add the applet as a listener to the button events.
clearButton.addActionListener(this);
sendButton.addActionListener(this);
quitButton.addActionListener(this);
center = new Panel();
center.setLayout(new GridLayout(2, 1));
center.add(cCallback.displayArea);
center.add(typeArea);
south = new Panel();
south.setLayout(new GridLayout(1, 3));
south.add(sendButton);
south.add(quitButton);
south.add(clearButton);
mainFrame.add("Center", center);
mainFrame.add("South", south);
center.setEnabled(false);
south.setEnabled(false);
mainFrame.show();
// Create the login dialog.
nameDialog = new Dialog(mainFrame, "Enter Name to Logon: ");
startButton = new Button("Logon");
startButton.addActionListener(this);
nameField = new TextField();
nameDialog.add("Center", nameField);
nameDialog.add("South", startButton);
try {
// Export ourselves as a ChatCallback to the server.
UnicastRemoteObject.exportObject(cCallback);
// Get the remote handle to the server.
chatServer = (ChatServer)Naming.lookup("//" + "WW7203052W2K" +
"/ChatServer");
catch(Exception e) {
e.printStackTrace();
nameDialog.setSize(new Dimension(200, 200));
nameDialog.show();
* Handle the button events.
public void actionPerformed(ActionEvent e) {
if (e.getSource().equals(startButton)) {
try {
nameDialog.setVisible(false);;
publicName = nameField.getText();
privateName = chatServer.register(cCallback, publicName);
center.setEnabled(true);
south.setEnabled(true);
cCallback.displayArea.setText("Connected to chat server as: " +
publicName);
chatServer.sendMessage(privateName, publicName +
" just connected to server");
catch(Exception ex) {
ex.printStackTrace();
else if (e.getSource().equals(quitButton)) {
try {
cCallback.displayArea.setText("");
typeArea.setText("");
center.setEnabled(false);
south.setEnabled(false);
chatServer.unregister(privateName);
nameDialog.show();
catch(Exception ex) {
ex.printStackTrace();
else if (e.getSource().equals(sendButton)) {
try{
chatServer.sendMessage(privateName, typeArea.getText());
typeArea.setText("");
catch(Exception ex) {
ex.printStackTrace();
else if (e.getSource().equals(clearButton)) {
cCallback.displayArea.setText("");
public void destroy() {
try {
super.destroy();
mainFrame.setVisible(false);;
mainFrame.dispose();
chatServer.unregister(privateName);
catch(Exception e) {
e.printStackTrace();
3. Chatcallback.java - interface used by clients to connect to the server.
import java.rmi.*;
public interface ChatCallback extends Remote {
public void addMessage(String publicName,
String message) throws RemoteException;
4. ChatcallbackImplementation.java - implements Chatcallback interface.
import java.rmi.*;
import java.io.*;
import java.awt.event.*;
import java.awt.*;
public class ChatCallbackImplementation implements ChatCallback {
// The buttons
// The Text fields
TextArea displayArea;
public void addMessage(String publicName,
String message) throws RemoteException {
displayArea.append("\n" + "[" + publicName + "]: " + message);
5. Chatserver.java - interface for the chat server.
import java.rmi.*;
import java.io.*;
public interface ChatServer extends Remote {
public String register(ChatCallback object,
String publicName) throws RemoteException;
* Remove the client associated with the specified registration string.
* @param registeredString the string returned to the client upon registration.
public void unregister(String registeredString) throws RemoteException;
* The client is sending new data to the server.
* @param assignedName the string returned to the client upon registration.
* @param data the chat data.
public void sendMessage(String registeredString, String message) throws RemoteException;
6. ChatServerImplementation.java - implements Chatserver interface.
import java.rmi.*;
import java.util.*;
import java.rmi.server.*;
import java.io.*;
* A class that bundles the ChatCallback reference with a public name used
* by the client.
class ChatClient {
private ChatCallback callback;
private String publicName;
ChatClient(ChatCallback cbk, String name) {
callback = cbk;
publicName = name;
// returns the name.
String getName() {
return publicName;
// returns a reference to the callback object.
ChatCallback getCallback() {
return callback;
public class ChatServerImplementation extends UnicastRemoteObject
implements ChatServer {
// The table of clients connected to the server.
Hashtable clients;
// Tne number of current connections to the server.
private int currentConnections;
// The maximum number of connections to the server.
private int maxConnections;
// The output stream to write messages to.
PrintWriter writer;
* Create a ChatServer.
* @param maxConnections the total number if connections allowed.
public ChatServerImplementation(int maxConnections) throws RemoteException {
clients = new Hashtable(maxConnections);
this.maxConnections = maxConnections;
* Increment the counter keeping track of the number of connections.
synchronized boolean incrementConnections() {
boolean ret = false;
if (currentConnections < maxConnections) {
currentConnections++;
ret = true;
return ret;
* Decrement the counter keeping track of the number of connections.
synchronized void decrementConnections() {
if (currentConnections > 0) {
currentConnections--;
* Register with the ChatServer, with a String that publicly identifies
* the chat client. A String that acts as a "magic cookie" is returned
* and is sent by the client on future remote method calls as a way of
* authenticating the client request.
* @param object The ChatCallback object to be used for updates.
* @param publicName The String the object would like to be known as.
* @return The actual String assigned to the object for removing, etc. or
* null if the client could not register.
public synchronized String register(ChatCallback object, String publicString) throws RemoteException {
String assignedName = null;
if (incrementConnections()) {
ChatClient client = new ChatClient(object, publicString);
assignedName = "" + client.hashCode();
clients.put(assignedName, client);
out("Added callback for: " + client.getName());
return assignedName;
* Remove the client associated with the specified registration string.
* @param registeredString the string returned to the client upon registration.
public synchronized void unregister(String registeredString) throws RemoteException {
ChatCallback cbk;
ChatClient sender;
if (clients.containsKey(registeredString)) {
ChatClient c = (ChatClient)clients.remove(registeredString);
decrementConnections();
out("Removed callback for: " + c.getName());
for (Enumeration e = clients.elements(); e.hasMoreElements(); ) {
cbk = ((ChatClient)e.nextElement()).getCallback();
cbk.addMessage("ChatServer",
c.getName() + " has left the building...");
else {
out("Illegal attempt at removing callback (" + registeredString + ")");
* Sets the logging stream.
* @param out the stream to log messages to.
protected void setLogStream(Writer out) throws RemoteException {
writer = new PrintWriter(out);
* The client is sending new message to the server.
* @param assignedName the string returned to the client upon registration.
* @param data the chat data.
public synchronized void sendMessage(String registeredString, String message) throws RemoteException {
ChatCallback cbk;
ChatClient sender;
try {
out("Recieved from " + registeredString);
out("Message: " + message);
if (clients.containsKey(registeredString)) {
sender = (ChatClient)clients.get(registeredString);
for (Enumeration e = clients.elements(); e.hasMoreElements(); ) {
cbk = ((ChatClient)e.nextElement()).getCallback();
cbk.addMessage(sender.getName(), message);
else {
out("Client " + registeredString+ " not registered");
catch(Exception ex){
out("Exception thrown in newData: " + ex);
ex.printStackTrace(writer);
writer.flush();
* Write s string to the current logging stream.
* @param message the string to log.
protected void out(String message){
if(writer != null){
writer.println(message);
writer.flush();
* Start up the Chat server.
public static void main(String args[]) throws Exception {
try {
// Create the security manager
System.setSecurityManager(new RMISecurityManager());
// Instantiate a server
ChatServerImplementation c = new ChatServerImplementation(10);
// Set the output stream of the server to System.out
c.setLogStream(new OutputStreamWriter(System.out));
// Bind the server's name in the registry
Naming.rebind("//" + args[0] + "/ChatServer", c);
c.out("Bound in registry.");
catch (Exception e) {
System.out.println("ChatServerImplementation error:" +
e.getMessage());
e.printStackTrace();
Using my own machine (connected to a network), I tried to test this one out by setting mine as the server and also the client. I did the following:
1. Compile the source code.
2. Use rmic to generate the skeletons and/or stubs from the ChatCallbackImplementation and ChatServerImplementation.
3. Start the rmiregistry with no CLASSPATH
4. Start the server successfully.
5. Start the applet using the AppletViewer command.
It worked fined.
The problem is when I ran the applet using the browser, IE explorer, the dialog boxes, frame and buttons did appear. I was able to do the part of logging on. But after that, the applet seemed to have hang. No message appeared that says I'm connected (which appeared using the appletviewer). I clicked the send button. No response.
I double-checked my classpath. I did have my classpath set correctly. I'm still trying to figure out the problem. Up to now, I don't have any clue what it is.
I will appreciate much if someone can help me figure what's could have possibly been wrong ....
Thanks a lot ...Hi Domingo,
I had a similar problem running applet/rmi with IE.
Looking in IE..view..JavaConsole error messages my applet was unable to find java.rmi.* classes.
I checked over java classes in msJVM, they're not present.
( WinZip C:\WINDOWS\JAVA\Packages\9rl3f9ft.zip and others from msVM installed )
( do not contain the java.rmi.* packages )
I have downloaded and installed the latest msJVM for IE5. ( I think its included in later versions)
@http://www.objectweb.org/rmijdbc/RJfaq.html I found ref to rmi.zip download to provide
these classes. I couldn't get the classes from the site but I managed to find a ref to IBM
site @http://alphaworks.ibm.com/aw.nsf/download/rmi which had similar download.
The download however didn't solve my problems. I was unable to install rmi.zip with
RmiPatch.exe install.
I solved this by extracting the class files from rmi.zip and installing them at C:\WINDOWS\JAVA\trustlib ( msJVM installation trusted classes lib defined in
registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Java VM\TrustedLibsDirectory )
This solved the problem. My rmi/applet worked.
Hope this helps you.
Chris
([email protected]) -
I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo several times, when I go to create the preset the adjustment brush is not an option to check. How do I add the adjustment brush to the develop presets. Thanks Ron.
The adjustment brush cannot be added to a develop preset.
If you can replace the adjustment brush with a gradient filter or radial filter, you can add those to a dev preset.
If a gradient filter or radial filter is not an option for you, you can at least create an adjustment preset to remember your brush settings. -
Joining a computer to the domain using the netbios name VS the FQDN
Where I work we must join computers to the domain using the netbios name (ex: mycomp) vs the FQDN mycompany.tx.com or else problems occur and the computer must be rejoined to the domain again with the netbios name- it can be joined to the domain initially, but after about 15 - 30 mins we'll get an error message when trying to logon.
The error message I believe is:
"The system cannot log you on to this domain because the system's computer account in its primary domain is missing or the password on the account is incorrect."
I haven't seen it happen in a while, but if I remember correctly this is the error message we get -I could be wrong though.
It may also have just been a "domain is not available" message.
Some additional info:
The netbios domain name is diffent then the DNS name ie: "mycompany.tx.com" was not made "mycompany" for netbios, but "mycomp" instead.
Our DFL is mixed mode with some 2000 and some 2003 servers
We used to use WINS, but now we do not.
And lastly we usually add a WINS address along with the dns address in each workstation via "advanced TCP/IP settings" (why I do not know) and occationally I will not be able to join a computer to the domain until I add this WINS address. I know what your thinking, and I will say that I am not 100% all of our WINS server were deactivated.
Any info on how to figure this out or troubleshoot this would be greatly apprieciated. Thanks a lot.Well this happened again.
As a test before I deployed a PC to one of our branches I joined it to the domain via the FQDN: mycompany.tx.com instead of the netbios name: mycomp prior to shipping. It spent a few days in transit and when it arrived a user plugged it in and tried to logon, but recieved this message:
"The system cannot log you on to this domain because the system's computer account in its primary domain is missing or the password on that account is incorrect"
I realize this error message maybe unrelated, but if I recall correctly this is what happened last time.
I pretty sure I was thorough in removing the computer account from the nessesary DCs (it failed and needed to be replaced) before I joined the replacement to the domain with the same name.
Rejoining to the domain via "mycomp" corrected the issue.
Netlogsetup.log:
01/06 15:24:01 -----------------------------------------------------------------
01/06 15:24:01 NetpValidateName: checking to see if 'BR021WS025' is valid as type 1 name
01/06 15:24:01 NetpCheckNetBiosNameNotInUse for 'BR021WS025' [MACHINE] returned 0x0
01/06 15:24:01 NetpValidateName: name 'BR021WS025' is valid for type 1
01/06 15:24:01 -----------------------------------------------------------------
01/06 15:24:01 NetpValidateName: checking to see if 'BR021WS025.mycompany.tx.com' is valid as type 5 name
01/06 15:24:01 NetpValidateName: name 'BR021WS025.mycompany.tx.com' is valid for type 5
01/06 15:24:01 -----------------------------------------------------------------
01/06 15:24:01 NetpValidateName: checking to see if 'FGYJ' is valid as type 2 name
01/06 15:24:01 NetpCheckNetBiosNameNotInUse for 'FGYJ' [ Workgroup as MACHINE] returned 0x0
01/06 15:24:01 NetpValidateName: name 'FGYJ' is valid for type 2
01/06 15:24:01 -----------------------------------------------------------------
01/06 15:24:01 NetpUnJoinDomain: unjoin from 'mycomp' using '(null)' creds, options: 0x4
01/06 15:24:01 OS Version: 5.0
01/06 15:24:01 Build number: 2195
01/06 15:24:01 ServicePack: Service Pack 4
01/06 15:24:01 NetpUnJoinDomain: status of getting computer name: 0x0
01/06 15:24:01 NetpApplyJoinState: actions: 0xb803a
01/06 15:24:01 NetpDsGetDcName: trying to find DC in domain 'mycomp', flags: 0x1020
01/06 15:24:01 NetpDsGetDcName: failed to find a DC in the specified domain: 0x54b
01/06 15:24:01 NetpApplyJoinState: initiating a rollback due to earlier errors
01/06 15:24:01 NetpApplyJoinState: actions: 0x40000
01/06 15:24:01 NetpGetLsaPrimaryDomain: status: 0x0
01/06 15:24:01 NetpUnJoinDomain: status: 0x54b
01/06 15:24:01 -----------------------------------------------------------------
01/06 15:24:01 NetpUnJoinDomain: unjoin from 'mycomp' using '(null)' creds, options: 0x0
01/06 15:24:01 OS Version: 5.0
01/06 15:24:01 Build number: 2195
01/06 15:24:01 ServicePack: Service Pack 4
01/06 15:24:01 NetpUnJoinDomain: status of getting computer name: 0x0
01/06 15:24:01 NetpApplyJoinState: actions: 0xb003a
01/06 15:24:02 NetpApplyJoinState: status of stopping and setting start type of Netlogon to 16: 0x0
01/06 15:24:06 NetpApplyJoinState: status of stopping and setting start type of TimeSvc to 16: 0x0
01/06 15:24:06 NetpGetLsaPrimaryDomain: status: 0x0
01/06 15:24:06 NetpLsaOpenSecret: status: 0x0
01/06 15:24:06 NetpLsaOpenSecret: status: 0x0
01/06 15:24:06 NetpSetLsaPrimaryDomain: for 'mycomp' status: 0x0
01/06 15:24:06 NetpApplyJoinState: status of setting LSA pri. domain: 0x0
01/06 15:24:07 NetpApplyJoinState: status of removing from local groups: 0x0
01/06 15:24:07 NetpApplyJoinState: NON FATAL: status of removing DNS registrations: 0x0
01/06 15:24:07 NetpUnJoinDomain: status: 0x0
01/06 15:24:12 -----------------------------------------------------------------
01/06 15:24:12 NetpDoDomainJoin
01/06 15:24:12 NetpMachineValidToJoin: 'BR063WS014'
01/06 15:24:12 NetpGetLsaPrimaryDomain: status: 0x0
01/06 15:24:12 NetpMachineValidToJoin: status: 0x0
01/06 15:24:12 NetpJoinWorkgroup: joining computer 'BR063WS014' to workgroup 'FGYJ'
01/06 15:24:12 NetpValidateName: checking to see if 'FGYJ' is valid as type 2 name
01/06 15:24:12 NetpCheckNetBiosNameNotInUse for 'FGYJ' [ Workgroup as MACHINE] returned 0x0
01/06 15:24:12 NetpValidateName: name 'FGYJ' is valid for type 2
01/06 15:24:13 NetpSetLsaPrimaryDomain: for 'FGYJ' status: 0x0
01/06 15:24:13 NetpJoinWorkgroup: status: 0x0
01/06 15:24:13 NetpDoDomainJoin: status: 0x0
01/07 10:49:50 -----------------------------------------------------------------
01/07 10:49:50 NetpValidateName: checking to see if 'mycompany.tx.com' is valid as type 3 name
01/07 10:49:50 NetpValidateName: 'mycompany.tx.com' is not a valid NetBIOS domain name: 0x7b
01/07 10:49:50 NetpCheckDomainNameIsValid [ Exists ] for 'mycompany.tx.com' returned 0x0
01/07 10:49:50 NetpValidateName: name 'mycompany.tx.com' is valid for type 3
01/07 10:49:59 -----------------------------------------------------------------
01/07 10:49:59 NetpDoDomainJoin
01/07 10:49:59 NetpMachineValidToJoin: 'BR021WS025'
01/07 10:49:59 NetpGetLsaPrimaryDomain: status: 0x0
01/07 10:49:59 NetpMachineValidToJoin: status: 0x0
01/07 10:49:59 NetpJoinDomain
01/07 10:49:59 Machine: BR021WS025
01/07 10:49:59 Domain: mycompany.tx.com
01/07 10:49:59 MachineAccountOU: (NULL)
01/07 10:49:59 Account: mycompany.tx.com\myUserName
01/07 10:49:59 Options: 0x27
01/07 10:49:59 OS Version: 5.0
01/07 10:49:59 Build number: 2195
01/07 10:49:59 ServicePack: Service Pack 4
01/07 10:49:59 NetpValidateName: checking to see if 'mycompany.tx.com' is valid as type 3 name
01/07 10:49:59 NetpValidateName: 'mycompany.tx.com' is not a valid NetBIOS domain name: 0x7b
01/07 10:49:59 NetpCheckDomainNameIsValid [ Exists ] for 'mycompany.tx.com' returned 0x0
01/07 10:49:59 NetpValidateName: name 'mycompany.tx.com' is valid for type 3
01/07 10:49:59 NetpDsGetDcName: trying to find DC in domain 'mycompany.tx.com', flags: 0x1020
01/07 10:50:00 NetpDsGetDcName: found DC '\\br041svr.mycompany.tx.com' in the specified domain
01/07 10:50:00 NetpJoinDomain: status of connecting to dc '\\br041svr.mycompany.tx.com': 0x0
01/07 10:50:00 NetpGetLsaPrimaryDomain: status: 0x0
01/07 10:50:00 NetpLsaOpenSecret: status: 0xc0000034
01/07 10:50:00 NetpGetLsaPrimaryDomain: status: 0x0
01/07 10:50:00 NetpLsaOpenSecret: status: 0xc0000034
01/07 10:50:01 NetpManageMachineAccountWithSid: NetUserAdd on '\\br041svr.mycompany.tx.com' for 'BR021WS025$' failed: 0x8b0
01/07 10:50:01 NetpManageMachineAccountWithSid: status of attempting to set password on '\\br041svr.mycompany.tx.com' for 'BR021WS025$': 0x0
01/07 10:50:01 NetpJoinDomain: status of creating account: 0x0
01/07 10:50:01 NetpJoinDomain: status of setting netlogon cache: 0x0
01/07 10:50:01 NetpGetLsaPrimaryDomain: status: 0x0
01/07 10:50:02 NetpSetLsaPrimaryDomain: for 'mycomp' status: 0x0
01/07 10:50:02 NetpJoinDomain: status of setting LSA pri. domain: 0x0
01/07 10:50:02 NetpJoinDomain: status of managing local groups: 0x0
01/07 10:50:03 NetpJoinDomain: status of setting ComputerNamePhysicalDnsDomain to 'mycompany.tx.com': 0x0
01/07 10:50:04 NetpJoinDomain: status of starting Netlogon: 0x0
01/07 10:50:04 NetpWaitForNetlogonSc: waiting for netlogon secure channel setup...
01/07 10:50:06 NetpWaitForNetlogonSc: status: 0x0, sub-status: 0x0
01/07 10:50:06 NetpJoinDomain: status of disconnecting from '\\br041svr.mycompany.tx.com': 0x0
01/07 10:50:06 NetpDoDomainJoin: status: 0x0
01/11 11:21:08 -----------------------------------------------------------------
01/11 11:21:08 NetpValidateName: checking to see if 'WK' is valid as type 2 name
01/11 11:21:20 NetpCheckNetBiosNameNotInUse for 'WK' [ Workgroup as MACHINE] returned 0x0
01/11 11:21:20 NetpValidateName: name 'WK' is valid for type 2
01/11 11:21:20 -----------------------------------------------------------------
01/11 11:21:20 NetpUnJoinDomain: unjoin from 'mycomp' using '(null)' creds, options: 0x4
01/11 11:21:20 OS Version: 5.0
01/11 11:21:20 Build number: 2195
01/11 11:21:20 ServicePack: Service Pack 4
01/11 11:21:20 NetpUnJoinDomain: status of getting computer name: 0x0
01/11 11:21:20 NetpApplyJoinState: actions: 0xb803a
01/11 11:21:20 NetpDsGetDcName: trying to find DC in domain 'mycomp', flags: 0x1020
01/11 11:21:56 NetpDsGetDcName: failed to find a DC having account 'BR021WS025$': 0x525
01/11 11:21:56 NetpDsGetDcName: found DC '\\BR021SVR' in the specified domain
01/11 11:21:56 NetUseAdd to \\BR021SVR\IPC$ returned 1326
01/11 11:21:56 Trying add to \\BR021SVR\IPC$ using NULL Session
01/11 11:21:56 NetpApplyJoinState: status of connecting to dc '\\BR021SVR': 0x0
01/11 11:21:57 NetpApplyJoinState: status of stopping and setting start type of Netlogon to 16: 0x0
01/11 11:22:01 NetpApplyJoinState: status of stopping and setting start type of TimeSvc to 16: 0x0
01/11 11:22:01 NetpGetLsaPrimaryDomain: status: 0x0
01/11 11:22:01 NetpLsaOpenSecret: status: 0x0
01/11 11:22:01 NetpLsaOpenSecret: status: 0x0
01/11 11:22:01 SamLookupNamesInDomain on BR021WS025$ failed with 0xc0000073
01/11 11:22:01 NetpManageMachineAccountWithSid: status of disabling account 'BR021WS025$' on '\\BR021SVR': 0x534
01/11 11:22:01 NetpApplyJoinState: status of disabling account: 0x534
01/11 11:22:01 NetpApplyJoinState: initiating a rollback due to earlier errors
01/11 11:22:01 NetpApplyJoinState: actions: 0x40130
01/11 11:22:01 NetpDsGetDcName: trying to find DC in domain '(null)', flags: 0x1020
01/11 11:22:26 NetpDsGetDcName: failed to find a DC having account 'BR021WS025$': 0x525
01/11 11:22:26 NetpDsGetDcName: found DC '\\br021svr.mycompany.tx.com' in the specified domain
01/11 11:22:26 NetUseAdd to \\br021svr.mycompany.tx.com\IPC$ returned 1326
01/11 11:22:26 Trying add to \\br021svr.mycompany.tx.com\IPC$ using NULL Session
01/11 11:22:26 NetpApplyJoinState: status of connecting to dc '\\br021svr.mycompany.tx.com': 0x0
01/11 11:22:26 NetpGetLsaPrimaryDomain: status: 0x0
01/11 11:22:26 NetpLsaOpenSecret: status: 0xc0000034
01/11 11:22:27 NetpSetMachineAccountPassword: NetUserGetInfo on '\\br021svr.mycompany.tx.com' 'BR021WS025$' failed: 0x8ad
01/11 11:22:27 NetpApplyJoinState: status of setting machine password: 0x8ad
01/11 11:22:27 NetpApplyJoinState: status of starting and setting start type of Netlogon to 4: 0x0
01/11 11:22:28 NetpApplyJoinState: status of starting and setting start type of TimeSvc to 4: 0x0
01/11 11:22:28 NetpApplyJoinState: status of disconnecting from '\\br021svr.mycompany.tx.com': 0x0
01/11 11:22:28 NetpApplyJoinState: status of disconnecting from '\\BR021SVR': 0x0
01/11 11:22:28 NetpUnJoinDomain: status: 0x534
01/11 11:22:28 -----------------------------------------------------------------
01/11 11:22:28 NetpUnJoinDomain: unjoin from 'mycomp' using '(null)' creds, options: 0x0
01/11 11:22:28 OS Version: 5.0
01/11 11:22:28 Build number: 2195
01/11 11:22:28 ServicePack: Service Pack 4
01/11 11:22:28 NetpUnJoinDomain: status of getting computer name: 0x0
01/11 11:22:28 NetpApplyJoinState: actions: 0xb003a
01/11 11:22:58 NetpApplyJoinState: status of stopping and setting start type of Netlogon to 16: 0x0
01/11 11:23:01 NetpApplyJoinState: status of stopping and setting start type of TimeSvc to 16: 0x0
01/11 11:23:02 NetpGetLsaPrimaryDomain: status: 0x0
01/11 11:23:02 NetpLsaOpenSecret: status: 0x0
01/11 11:23:02 NetpLsaOpenSecret: status: 0x0
01/11 11:23:02 NetpSetLsaPrimaryDomain: for 'mycomp' status: 0x0
01/11 11:23:02 NetpApplyJoinState: status of setting LSA pri. domain: 0x0
01/11 11:23:03 NetpApplyJoinState: status of removing from local groups: 0x0
01/11 11:23:03 NetpApplyJoinState: NON FATAL: status of removing DNS registrations: 0x0
01/11 11:23:03 NetpUnJoinDomain: status: 0x0
01/11 11:23:45 -----------------------------------------------------------------
01/11 11:23:45 NetpDoDomainJoin
01/11 11:23:45 NetpMachineValidToJoin: 'BR021WS025'
01/11 11:23:45 NetpGetLsaPrimaryDomain: status: 0x0
01/11 11:23:45 NetpMachineValidToJoin: status: 0x0
01/11 11:23:45 NetpJoinWorkgroup: joining computer 'BR021WS025' to workgroup 'WK'
01/11 11:23:45 NetpValidateName: checking to see if 'WK' is valid as type 2 name
01/11 11:23:57 NetpCheckNetBiosNameNotInUse for 'WK' [ Workgroup as MACHINE] returned 0x0
01/11 11:23:57 NetpValidateName: name 'WK' is valid for type 2
01/11 11:23:58 NetpSetLsaPrimaryDomain: for 'WK' status: 0x0
01/11 11:23:58 NetpJoinWorkgroup: status: 0x0
01/11 11:23:58 NetpDoDomainJoin: status: 0x0
01/11 11:33:08 -----------------------------------------------------------------
01/11 11:33:08 NetpValidateName: checking to see if 'mycomp' is valid as type 3 name
01/11 11:33:17 NetpCheckDomainNameIsValid [ Exists ] for 'mycomp' returned 0x0
01/11 11:33:17 NetpValidateName: name 'mycomp' is valid for type 3
01/11 11:34:23 -----------------------------------------------------------------
01/11 11:34:23 NetpDoDomainJoin
01/11 11:34:23 NetpMachineValidToJoin: 'BR021WS025'
01/11 11:34:23 NetpGetLsaPrimaryDomain: status: 0x0
01/11 11:34:23 NetpMachineValidToJoin: status: 0x0
01/11 11:34:23 NetpJoinDomain
01/11 11:34:23 Machine: BR021WS025
01/11 11:34:23 Domain: mycomp
01/11 11:34:23 MachineAccountOU: (NULL)
01/11 11:34:23 Account: mycomp\USER1
01/11 11:34:23 Options: 0x27
01/11 11:34:23 OS Version: 5.0
01/11 11:34:23 Build number: 2195
01/11 11:34:23 ServicePack: Service Pack 4
01/11 11:34:23 NetpValidateName: checking to see if 'mycomp' is valid as type 3 name
01/11 11:34:23 NetpCheckDomainNameIsValid [ Exists ] for 'mycomp' returned 0x0
01/11 11:34:23 NetpValidateName: name 'mycomp' is valid for type 3
01/11 11:34:23 NetpDsGetDcName: trying to find DC in domain 'mycomp', flags: 0x1020
01/11 11:34:35 NetpDsGetDcName: failed to find a DC having account 'BR021WS025$': 0x525
01/11 11:34:35 NetpDsGetDcName: found DC '\\BR021SVR' in the specified domain
01/11 11:34:35 NetpJoinDomain: status of connecting to dc '\\BR021SVR': 0x0
01/11 11:34:35 NetpGetLsaPrimaryDomain: status: 0x0
01/11 11:34:35 NetpLsaOpenSecret: status: 0xc0000034
01/11 11:34:35 NetpGetLsaPrimaryDomain: status: 0x0
01/11 11:34:35 NetpLsaOpenSecret: status: 0xc0000034
01/11 11:34:36 NetpJoinDomain: status of creating account: 0x0
01/11 11:34:36 NetpJoinDomain: status of setting netlogon cache: 0x0
01/11 11:34:36 NetpGetLsaPrimaryDomain: status: 0x0
01/11 11:34:37 NetpSetLsaPrimaryDomain: for 'mycomp' status: 0x0
01/11 11:34:37 NetpJoinDomain: status of setting LSA pri. domain: 0x0
01/11 11:34:37 NetpJoinDomain: status of managing local groups: 0x0
01/11 11:34:37 NetpJoinDomain: status of setting ComputerNamePhysicalDnsDomain to 'mycompany.tx.com': 0x0
01/11 11:34:38 NetpJoinDomain: status of starting Netlogon: 0x0
01/11 11:34:38 NetpWaitForNetlogonSc: waiting for netlogon secure channel setup...
01/11 11:34:45 NetpWaitForNetlogonSc: status: 0x0, sub-status: 0x0
01/11 11:34:45 NetpJoinDomain: status of disconnecting from '\\BR021SVR': 0x0
01/11 11:34:45 NetpDoDomainJoin: status: 0x0
- I forgot to add when the user experienced this problem I checked for the computer account and found it was not present in the domain on any DCs. -
Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only
Maybe you are looking for
-
Two Magic Trackpads Being Used By Two Different Computers Within Range
I lent my Magic Trackpad to someone who is using it in the same house. If they decide to get one how will we avoid the obvious problems this could cause? I already had to turn off my Bluetooth because I was receiving notification of connection being
-
Nokia c3 i am update new software but jar and jad apps not working live tv not working ....
-
Hi all, I require the procedure to use UPDATE DB table in reporting , Such as in case of LFA1, I want to update LFA1 directly and change some of the mentioned fieldss to Hardcoded values and some of them are to be initilased from the internal t
-
Hi, I have an Intel Core Duo Macbook pro and want to set it up with my home cinema system. I am using an optical link to my AV receiver and it receives stereo sound fine but does not seem to recognise 5.1 surround sound from DVDs that I play on the m
-
Active Table Logging T000 performance impact
Hi fellow SAP experts, I need some advice on system performance impact when switching on Table Logging for T000 - configuration in production please? We have decided to turn on Table Logging for auditing purposes, only allowing developer config in pr