Cannot display values in LOV when using oe_transaction_types in Web ADI Template in R12

Hi,
I use BNE_INTEGRATOR_UTILS.CREATE_TABLE_LOV to create a POPList by using the view oe_transaction_types, but there is no any data displayed in the order type column,  while can use table oe_transaction_types_tl to create the POP List and display value. Does the Web ADI LOV not support the MOAC? Here is the API:
  BNE_INTEGRATOR_UTILS.CREATE_TABLE_LOV(P_APPLICATION_ID     => 20009, --IN NUMBER,
                                        P_INTERFACE_CODE     => 'XXX_UPL_ORD_INTF', --IN VARCHAR2,
                                        P_INTERFACE_COL_NAME => 'P_ORDER_TYPE', --IN VARCHAR2,
                                        P_ID_COL             => 'NAME', --IN VARCHAR2,
                                        P_MEAN_COL           => 'NAME', --IN VARCHAR2,
                                        P_DESC_COL           => 'DESCRIPTION', --IN VARCHAR2,
                                        P_TABLE              => 'OE_TRANSACTION_TYPES', --IN VARCHAR2,
                                        P_ADDL_W_C           => 'TRANSACTION_TYPE_CODE = ''ORDER'' AND NVL(END_DATE_ACTIVE, SYSDATE) BETWEEN START_DATE_ACTIVE AND SYSDATE',
                                        P_WINDOW_CAPTION     => 'Order Type', --IN VARCHAR2,
                                        P_WINDOW_WIDTH       => 500, --IN NUMBER,
                                        P_WINDOW_HEIGHT      => 400, --IN NUMBER,
                                        P_TABLE_BLOCK_SIZE   => 10, --IN NUMBER,
                                        P_TABLE_SORT_ORDER   => 'NAME', --IN VARCHAR2,
                                        P_USER_ID            => -1, --IN NUMBER,
                                        P_TABLE_COLUMNS      => 'NAME,DESCRIPTION', --  IN VARCHAR2,
                                        --P_TABLE_SELECT_COLUMNS IN VARCHAR2,
                                        --P_TABLE_COLUMN_ALIAS   IN VARCHAR2,
                                        --P_TABLE_HEADERS        IN VARCHAR2,
                                        P_POPLIST_FLAG => 'Y');

Duplicate post.
How to restrict the display of Integrator in Web ADI
How to restrict the display of Integrator in Web ADI

Similar Messages

  • 2012 macbook pro retina display artifacts on screen when using onboard video

    2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
    About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
    On top of that issue I also have had the ghosting issue.
    Anyone else have this problem?

    artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
    There are a few retina owners who have faulty gpus.

  • What is the best way to display errors to users when using JSPs?

              Hello,
              Could someone suggest me the best way to display errors to users when using JSPs?
              Many thanks in advance.
              Rino
              

              Thanks for the code snippet!
              Rino
              "Deepak Vohra" <[email protected]> wrote:
              >
              >
              >The 'errorPage' attribute of the 'page' directive forwards uncaught run-time
              >exceptions
              >to an error processing page. For example:
              >
              ><%@ page errorPage="error.jsp" %>
              >
              >redirects the browser to the JSP page error.jsp if an uncaught exception
              >is encountered.
              >
              >
              >Within error.jsp, indicate that it is an error-processing page, via the
              >directive:
              >
              >
              >
              ><%@ page isErrorPage="true" %>
              >
              >The Throwable object describing the exception may be accessed within
              >the error
              >page via the 'exception' implicit object.
              >
              >
              ><% if (exception != null) { %>
              ><p> An exception was thrown: <b> <%= exception %>
              >
              ><p> With the following stack trace:
              ><pre>
              >
              ><%
              > ByteArrayOutputStream ostr = new ByteArrayOutputStream();
              > exception.printStackTrace(new PrintStream(ostr));
              > out.print(ostr);
              >%>
              ></pre>
              >
              >
              >
              >"Rino Srivastava" <[email protected]> wrote:
              >>
              >>Hello,
              >>
              >>Could someone suggest me the best way to display errors to users when
              >>using JSPs?
              >>
              >>Many thanks in advance.
              >>
              >>Rino
              >
              

  • BO4 - The action cannot be performed WIS 30650 when try open some WEBI docs

    Get message BO4 - The action cannot be performed WIS 30650 when try open some WEBI docs.
    Documents created brand new in BI 4.0 .
    Some docs open fine.
    Get message even when log in as Administrator.
    Windows 2008 Server Oracle 11.2.0.1
    Any idea what causes this.
    Many Thanks

    Hi,
    Thanks for reponse.
    Distributed environment 1 server hosts web application server (Tomcat), 1 server hosts BOE components.
    Contacted BO support and we did right click on document/modify and get error message you referred to.
    However - also get this message when try right click modify existing web intelligence sample reports or even try open which ship with the product and have never been modified.
    Checked that file referred to exist in Input frs and does.
    Logged in as Administrator so not permission-realted.
    Thi seems like a huge bug to me that can't vene open the webi sample reports which ship with the product.
    servers look fine - I'm only one using and can create ans save reports fine just openiong or modifying some later or some of the sample ones.
    Our FRS is on networked location and uses UNC path - I'm assuming this has no impcat.
    Many Thanks

  • Mac user, PS CC 2014 latest version. When using "Save for Web" I bring my 900 x600px @72 ppi in to SFW and the output becomes 300ppi. The only way it stays at 72ppi is if I check "none" for metadata. I know to should not matter much, but I would prefer to

    Mac user, PS CC 2014 latest version. When using "Save for Web" I bring my 900 x600px @72 ppi in to SFW and the output becomes 300ppi. The only way it stays at 72ppi is if I check "none" for metadata. I know to should not matter much, but I would prefer to keep all my web jpgs @ 72ppi. Any solutions?

    It opens up as 900x600 @300ppi
    Here's a screenshot-

  • Is it possible to flag e-mails and/or right click an e-mail to mark as read/unread, etc. when using Microsoft Outlook Web Access in Firefox on a Mac?

    Is it possible to flag e-mails and/or right click an e-mail to mark as read/unread, etc. when using Microsoft Outlook Web Access in Firefox on a Mac?
    == This happened ==
    Every time Firefox opened
    == I've never been able to figure out how to do those things in Firefox.

    When you use OWA in something other than IE, you're using OWA lite and no--it is not possible to do either in OWA lite (well, new Exchange stuff makes my answer a little less emphatic but still: pretty much no). Thanks Microsoft. But this guy made it possible to mark unread/read and select all/none:
    http://david-burger.blogspot.com/2008/07/firefox-greasemonkey-outlook-web-access_19.html

  • Cannot display value using ${testitem.test}

    This is my program. I'm been using bean to display value in JSP page but it cannot be done.
    here are the codes.
    main page (Testing.jsp)
    <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
    <html>
    <head>
    <link rel=stylesheet type="text/css" href="auction.css">
    <title>Enter Your Bid</title></head>
    <body>
    <table class="mainBox" width="400">
    <tr><td class="boxTitle" colspan="2">
    Wrox JSP Auction
    </td></tr>
    <tr><td colspan="2"> </td></tr>
    <tr><td>
    <form action="Testing2.jsp" method="get">
    <table>
    <tr>
    <td width="200">Item to bid on</td><td>
    <select name="item">
    <option>27 inch TV</option>
    <option>DVD Player</option>
    <option>Digital Camera</option>
    </select>
    <input type="hidden" name="action" value="bid"/>
    </td></tr>
    <tr>
    <td>Bid Price:</td>
    <td><input name="price" type="text" width="10"/>
    </td></tr>
    <tr><td colspan="2"> </td></tr>
    <tr><td colspan="2" align="center">
    <input type="submit" value="Bid now!"/>
    </td></tr>
    </table>
    </form>
    </td></tr></table>
    </body>
    </html>
    Second page (Testing2.jsp)
    <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
    <html>
    <head>
    <link rel=stylesheet type="text/css" href="auction.css">
    <title>Testing on Bid</title>
    </head>
    <body>
    <table class="mainBox" width="600">
    <tr><td class="boxTitle" >
    Testing 123
    </td></tr>
    <tr><td>
         <jsp:useBean id="testitem" class="com.jsp.newsys.testing.Testing2" scope="request" >
         <jsp:setProperty name="testitem" property="*" />
         </jsp:useBean>
         <jsp:forward page="Testing3.jsp"/>
    </td></tr>
    </table>
    </body>
    </html>
    page value in (Testing3.jsp)
    <html>
    <head>
    <link rel=stylesheet type="text/css" href="auction.css">
    <title>Show the Bid</title></head>
    <body>
    <table class="mainBox" width="600">
    <tr><td class="boxTitle" colspan="2">
    Your Auction Bid
    </td></tr>
    <td class="tableCell">
    ${testitem.test}</td>
    </table>
    </body>
    </html>
    here is the bean.
    package com.jsp.newsys.testing;
    public class Testing2 {
         private String test;
    public Testing2() {
    public void setTest(String test)
              this.test=test;
         public String getTest()
         return this.test;
    Please help to resolve this problem. Thanks.
    Message was edited by:
    wesleygch

    Now that the Flex 2.0 forums are all set up, it is time to
    start using them for 2.0 questions. So in the future, don't post
    2.0 questions here.
    In the meantime, getURL has been changed to navigateToURL().
    See the docs for details.
    Also, I think you are mixing Flex 1.5 and 2.0. 2.0 does not
    use a server, and you do not call mxml file directly. Instead you
    compile the swf with FlexBuilder or the command line compiler, and
    call the html wrapper.
    Tracy

  • How To Display Value In inputText When List Is Used

    Hello,
    I have a question regarding how to display value from List in a jsf page?
    From a Map, i could display like
    <ice:inputText  id="plantno" value="#{bean.detailedRowData['plantno']}"So if I am using a List instead of Map, how can I refer value in List so that I could display my plantno?
    <ice:inputText  id="plantno" value="#{bean.?????}"Thanks

    Create a backing bean method that fetches the value from the list for you.
    <ice:inputText  id="plantno" value="#{bean.plantNo}"/>
    public class MyFunkyBean {
      private List<String> rowdata;
      public String getPlantNo(){
        return rowdata.get(INDEX_AT_WHICH_THE_PLANTNO_IS_STORED);
    }It really isn't possible to turn the list into a regular bean/entity?

  • Formatting display value in LOV

    I have an LOV whose display value is a concatenation of 2 database fields. That works fine. But I want to put a tab in between the
    2 fields, otherwise the values are displayed one right after the other, and the columns are out of alignment from one row to the next.
    In sqlplus, I can do:
    select CHR(9)||to_char(objecttype_id)||CHR(9)||objecttype_name from hdb_objecttype;
    And I get:
    12 acoustic velocity meter
    1 basin
    11 canal
    2 climate site
    3 confluence
    4 diversion
    10 hydro plant unit
    5 hydro power plant
    6 reach
    7 reservoir
    14 riverware dataobject
    When I do the same thing in my LOV query, I get
    12 acoustic velocity meter
    1 basin
    11 canal
    2 climate site
    3 confluence
    4 diversion
    10 hydro plant unit
    5 hydro power plant
    6 reach
    7 reservoir
    14 riverware dataobject
    I've tried lpad and rpad, also. With blanks as padding they produce the above results. If I use a character such as '.' they behave
    correctly, but I still don't have standard field widths because of the variance in character sizes.
    Why won't any of this formatting work, and how can I get it to?
    Thanks,
    Carol

    Hi, Carol,
    In addition to what Max said, you may be displaying this in a region where whitespace is compressed; in which case you would need to use non-breaking spaces in place of regular spaces:
    SELECT     REPLACE ( RPAD ( TO_CHAR (objecttype_id)
                     , 10
                     ) || objecttype_name
               , CHR (38) || 'nbsp;'      -- CHR (38) is ampersand
    ...Speaking of compressing whitespace, this site does it.
    So when you say
    CarolM2 wrote:
    In sqlplus, I can do:
    select CHR(9)||to_char(objecttype_id)||CHR(9)||objecttype_name from hdb_objecttype;
    And I get:
    12 acoustic velocity meter
    1 basin
    11 canal
    2 climate site
    3 confluence
    4 diversion
    10 hydro plant unit
    5 hydro power plant
    6 reach
    7 reservoir
    14 riverware dataobject
    When I do the same thing in my LOV query, I get
    12 acoustic velocity meter
    1 basin
    11 canal
    2 climate site
    3 confluence
    4 diversion
    10 hydro plant unit
    5 hydro power plant
    6 reach
    7 reservoir
    14 riverware dataobjectThey come out looking identical.
    When you post formatted text (such as the results above) on this site, type these 6 characters:
    (small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Problem Displaying Value of LOV

    I have a drop down on one of my edit screens that gives a list of Regions. On the screen the user can select the correct value and click Apply Changes and the database gets updated. The problem is that if I click to edit that record again it shows thate field as NULL. It will not display the value.
    The data is correct in the database but I cannot see it on the edit screen. I have APEX 3.2

    It's a pretty straight forward sql and the list of values does appear when creating the item.... but I have a read only condition on this field so it is read only once the record has been created as the user is not allowed to change the value on update. I just tried changing the Read Only "display item normally" and now it works. So looks like the issue is trying to make the field display/read only once the value is set.
    one solution that comes to my mind is to have two fields on the page... the POP LOV display only when the P5_LE_LOC_ID is null, then have a read only text field that displays when P5_LE_LOC_ID is not null... but seems silly to have to do this
    select facility || ' ' || fac_desc d, facility r
    from XXC.XXC_GL_DIV_REG_FAC
    where nvl(LOCATION_INACTIVE_DATE,to_date('01/01/1901','mm/dd/yyyy')) = to_date('01/01/1901','mm/dd/yyyy')
    and fac_desc not like 'CLSD%'
    and fac_desc not like 'CNXL%'
    and fac_desc not like 'ACQ%'
    and fac_desc not like 'HOLD%'
    and fac_desc not like '%Remote'
    order by 1
    Edited by: Kristina on Jun 11, 2010 1:10 PM

  • Displaying pdf in browser when using Windows 7 Beta & AR 9

    Early indications are that "Adobe Air" and/or "Acrobat.com" are breaking the display in browser function in Windows 7 Beta when using Adobe Reader 9.
    On a fresh install of Windows 7 Beta, I installed Adobe Reader 9, and as everyone is finding out, you cannot display a pdf in a browser window. Doesn't matter which browser either. IE8, Opera 10a, Mozilla SeaMonkey 1.1.14 had the same result for me. The only workable option was to have the pdf open in a separate window of Adobe Reader itself. Oddly though, on rare occasions I could get a pdf to display in a browser window, but 95% of the time it would not work.
    On another fresh install of Windows 7 Beta, I installed Adobe Reader 9. After installation I opened Adobe Reader and accepted the license agreement, then closed Adobe Reader. Next I uninstalled "Acrobat.com", then uninstalled "Adobe Air" using Programs and Features in Control Panel. So far, I have not had any problem downloading and viewing pdf's in a browser window. Tested with IE8 and Opera 10a. Note that I did not run compatibility mode on Adobe Reader.

    Hi,
    I (April) apologize I have been OOO and have not been able to respond to your replies.  
    Let’s start over. 
    We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
    We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
    Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
    "Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
              No. I it ALSO occurs when launched from the start page. 
    Have you tried deleting the CPD file and reopening Rh and the project?
              Yes, without success.
    Are you using any redirects?    
              Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.” 
              I will add that the project also displays incorrectly in Google Chrome.
    Thanks  April

  • "SharePoint Designer cannot display the item" error when edit workflow

    Hi
    I create workflow for sharepoint list in version 2007. Then upgrade sharepoint form version 2007 to 2010. Now when I want to edit this workflow, get this error:
    “SharePoint Designer cannot display the item.
    What you can try:
    Click the Refresh button or press F5 to refresh the content from your site.
    Go back to the previous page
    Most likely causes:
    The file has been deleted from the site.
    The site is encountering problems.”
    What is the problem?
    Thanks.

    Hi,
    Have you used custom activity in your workflow? We may come across this issue when we use custom activity. A workaournd is to modify the Workflows XOML file, and remove custom activity reference from it. And restart your SharePoint designer. See below blog.
    http://saiabhilash.blogspot.com/2011/11/sharepoint-designer-cannot-display-item.html
    Or a quick workaround is recreate the workflow in SharePoint Designer 2010.
    Thanks & Regards,
    Emir
    Emir Liu
    TechNet Community Support

  • How to trap null return values from getters when using Method.invoke()?

    Hi,
    I am using Method.invoke() to access getters in an Object. I need to know which getters return a value and which return null. However, irrespective of the actual return value, I am always getting non-null return value when using Method.invoke().
    Unfortunately, the API documentation of Method.invoke() does not specify how it treats null return values.
    Can someone help?
    Thanks

    What do you get as a result?I think I know what the problem is.
    I tested this using following and it worked fine:
    public class TestMethodInvoke {
    public String getName() {
    return null;
    public static void main(String args[]) throws SecurityException, NoSuchMethodException, IllegalArgumentException, IllegalAccessException, InvocationTargetException {
    Object o = new TestMethodInvoke();
    Class cls = o.getClass();
    Method m = cls.getMethod("getName", (Class[]) null);
    Object result = m.invoke(o, (Object[])null);
    if (result == null) {
    System.err.println("OK: Return value was null as expected");
    else {
    System.err.println("FAILED: Return value was NOT null as expected");
    However, when I use the same technique with an EJB 3.0 Entity class, the null return value is not returned. Instead, I get a String() object. Clearly, the problem is the the EJB 3.0 implementation (Glassfish/Toplink) which is manipulating the getters.
    Regards
    Dibyendu

  • Firefox 33 doesn't display a pdf file when using the response object

    Firefox 33.0.2 does not display pdf files when using the code below from an asp.net program, which works for previous versions of Firefox, and also works with IE. I'm using the built-in pdf viewer. All of my plugins are disabled.
    Dim strPDF As String
    strPDF = Session("filname") 'pdf filename
    Response.Clear()
    Response.ClearHeaders()
    Response.Buffer = True
    Response.ContentType = "application/pdf"
    Response.CacheControl = "Private"
    Response.AddHeader("Pragma", "no-cache")
    Response.AddHeader("Expires", "0")
    Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
    Response.AddHeader("Content-Disposition", "inline; filename=" + strPDF)
    Response.WriteFile(strPDF)
    Response.Flush()
    Response.Close()
    Response.Clear()
    Response.End()
    Session("filname") = ""

    Thanks cor-el. You pointed me in the right direction. It appears to me that a reported Firefox 33 bug with the handling of compression (Transfer-Encoding: chunked) is the culprit (https://support.mozilla.org/en-US/questions/1026743). I was able to find a work-around by specifying the file size and buffering. Below is my code, with some code from http://www.codeproject.com/Questions/440054/How-to-Open-any-file-in-new-browser-tab-using-ASP.
    Dim strPDF As String
    strPDF = Session("filname") 'pdf filename
    Dim User As New WebClient()
    Dim FileBuffer As [Byte]() = User.DownloadData(strPDF)
    If Not (FileBuffer Is Nothing) Then
    Response.Clear()
    Response.ClearHeaders()
    Response.CacheControl = "Private"
    Response.AddHeader("Pragma", "no-cache")
    Response.AddHeader("Expires", "0")
    Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
    Response.ContentType = "application/pdf"
    Response.AddHeader("content-length", FileBuffer.Length.ToString())
    Response.BinaryWrite(FileBuffer)
    Response.Flush()
    Response.Close()
    Response.Clear()
    Response.End()
    End If
    Session("filname") = ""

  • URGENT!!!!Userinfo cannot display well on portal desktop using Win98 IE!!!!

    Hello,
    I browse portal which version is 2005Q1 in win98 chinese version, but the userinfo on the portal desktop left cannot display correctly. Here the userinfo should be chinese word with utf-8 code.
    But in win2000 and XP, it display well.
    The userinfo template is /etc/opt/SUNWps/desktop/ut_zh/UserInfo/html/content.template.
    Please help me to solve it.

    Do you use chinese version of Portal under chinese locale supported by 2005Q1 platforms? I'll assume your Window98 IE is supported chinese as well . Userinfo in one of channels under desktop. Do you have any other channel which display chinese characters? Look at userinfo channel configuration and select client=HTML to examine correct locale for this property. If you have more than one channel need to display localization character, please create different locale of desktop and apply them all together.
    Look at the Portal customization manual for more detail. HTH, Jerry

Maybe you are looking for