Cannot e-print from my ISP

Have tried from 3 different accounts using FireFox and i-phone - but cannot print using my ISP Frontier Communications (my addresses are all epix.net (Frontier bought them out 3 years ago). I can print from my store e-mail (awiweb.com) and from my mobile me account. Is Frontiered "blackballed" for some reason??? Is there a work-around?

Hi Barbara
Check out the links below....
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01619067#N55
http://www.hp.com/united-states/campaigns/mobility/
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Similar Messages

I can send mail but cannot get mail from my ISP

Using OS10.8.4 I can send emails but cannot receive them from my ISP who have told me it is an Apple problem.

OS X Mail: Troubleshooting sending and receiving email messages

Cannot air print from ipad 2 to canon MG5370 air printer, cannot air print from ipad 2 to canon MG5370 air printer

cannot air print from ipad 2 to canon MG5370 air printer,

Canon Easy Print free app for iPad might work

HT4356 all of a sudden I cannot air print from my ipad or iphone - I can still print from my laptop - don't know how to fix

All of a sudden i can no longer air print from my iphone 4S or my ipad 2
Need help
I can still air print from my Dell laptop

Hello rcappel,
Thank you for the details of the issue you are experiencing when printing from your iPhone and iPad. I found a couple of resources I recommend for the issue you described.
First, I recommend following these steps:
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
You can find the full article here:
AirPrint Basics
http://support.apple.com/kb/HT4356
If you are still having trouble printing after following those steps, I recommend these steps:
Wi-Fi disconnects, or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

Wireless Network Printing; "Network is Busy", Cannot ping printer from my Macbook Pro

I have a MBP (Mac OSX 10.6.8, Intel i7) connected wirelessly to a Actiontec Q1000 wireless router. The wireless router has a printer connected via a LAN ethernet cable. I am able to log in to the router (192.168.0.1) and see the printer (192.168.0.8), and from the router's Utilities I can ping the printer using the router's ping tool. I am unable to ping the printer from my MBP. I am unable to log into the printer's IP address by typing in 192.168.0.8 in my browser window.
I also have a Windows laptop connected to the same wireless network. From the router, I can see the Window's laptop (192.168.0.10) and the Windows laptop can ping the printer (again, 192.168.0.8). Additionally, from the Windows laptop I can log into the printer's IP address by typing in 192.168.0.8 in my browser window.
The printer is a Dell 1700n and I am using the "Generic Postscript Printer Driver". I am able to delete the printer, and then add it back in as a USB connected printer and print fine. I then delete the printer and add it back in as a network printer (192.168.0.8) and am then unable to print. I am getting an error that says "Network is busy, will retry in ___ seconds". I then get a error message that says the "Printer is busy".
Using the MBP's "Network Utility's" ping tab, I am able to ping the router (192.168.0.1), the other Windows laptop (192.168.0.10), my Roku (192.168.0.7), etc. I am unable to ping the printer (192.168.0.8).
From my Window's CMD prompt, I am able to ping the router (192.168.0.1), my MBP (192.168.0.5), my Roku (192.168.0.7) and the printer (192.168.0.8). I am also able to print wirelessly from my Window's laptop (192.168.0.10).
I have looked for a CUPS printer driver for my Dell 1700n printer, but there is only a CUPS printer driver for the Dell 1710n printer (which is different).
I have also googled around and found that the Dell 1700n is an old Lexmark E322 printer, so I installed the CUPS Lexmark E322 printer driver. I then try to print wirelessly from my MBP and nothing.
This is clearly a network MBP issue, and I have searched the forums but have been unable to track down a solution. I would appreciate anyone's help to enable me to:
1. Be able to ping my printer (192.168.0.8),
2. Be able to log in to my printer via a web browser (http://192.168.0.8), and
3. Be able to print wirelessly to the printer from my MBP.
Does anyone have any thoughts?
Thanks in advance,
MC

So I spent almost 3 hours on a share session with Lexmark, who I must say I was incredibly impressed with their patience. Long story short, my wife and I have the exact same MBPs. Her MBP was printing fine to the same printer. The tech and I verified that all of our network settings were identical. At the end of the day, the solution was power cycling the router. Poof. Magic. No idea why the power cycle worked, but it worked and I now have a solution. Let me know if anyone has any questions about all of the steps in between.
MC

HP 6490 running on windows 7. Cannot get printer from offline status. prints ok from laptop.

I have a 6940 printer running on windows 7. Went on vaction and had everything turned off for a week. Turned everything back on and now printer will not come out of offline status. Printer is on home network plugged into a router. Printer will print from my laptop using XP. Everything was fine before.

Thanks for the reply.
When I use Remote Desktop and use the Public IP of the router without the port number (49250), I am able to get into the server. However, when I try to use RDP with the [Public IP]:49250, it will not connect to the 192.168.0.30 workstation.
Right now the router is program to forward port 49250 requests to the 0.30 workstation.
I am going to work on the Inbound/Outbound Firewall settings today and see if this will resolve the issue.

Cannot wirelessly print from iMac 3054a

My HP 3054a will not print wirelessly from my new imac, but it will print with the USB cable pluged in, ( the wireless button on the printer is blinking.)

Did you ever install the printer onto your wireless network? If not, get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Install the software making sure that the USB cord is NOT plugged in. Choose the Network installation type when it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have changed broadband supplier and cannot now print from iPad to airprinter

I have changed broadband supplier and cannot now print to my air printer

Your printer must use the settings (SSID and Password) of your new router.
Currently your printer is no longer on the same network as your iPad.
If it is a HP printer, you have to run the CD again.

HT1338 since IOS6 update i cannot air print from my ipad3 and iPhone4. Any ideas??????

since IOS6 update i can use Air print on my IPAD3 and IPHONE 4. Can anyone help??????????

I have the same problem as do many others. Neither my iPhone 3 or 4 work since upgrading to ios6.
All Windows based devices work fine it is just a problem with ios6, I think Apple are working on this.
Was about to buy a mac laptop but now gone back to PC.
I think all we can do is make a fuss to Apple to hurry them along.

Occasionally cannot contact printer from macbook or iPhone

Printer is not connected yet I had printed out a document about 15 minutes before. Using macbook OS Lion safari connecting to Photosmart premium C310
This question was solved.
View Solution.

Log onto the router's internal web page by typing 192.168.0.1 into the address bar of a web browser. It will ask a login and password. The login is 'admin' and the password is left blank.
Once in the settings, find an area in which the router can check its own firmware.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

You really cannot print from iPad or iPhone apps!

You cannot really print from iPad or iPhone apps! And that is not good! Of course you can print from web and email on the iPad! But why not from the apps. Why not. This is nonsense!

clarencefrancis wrote:
You cannot really print from iPad or iPhone apps! And that is not good!
Yes I really can. And that is good.
Read: Printing from an iPad or iPhone
If you want to print what appears on an iPad screen but the app does not have a "share" icon, take a screenshot and print it.
To print directly from an iPad you need an AirPrint - enabled printer on the same wireless network as the iPad. All AirPrint printers are wireless but not all wireless printers are AirPrint-enabled.
If you do not have an AirPrint printer, a number of workarounds exist that enable the use of any printer you normally use, even older ones that may predate AirPrint by decades. Search for the following products:
handyPrint (Mac only, donation-supported)
Printopia (Mac only, $19.95 with free trial)
These are utilities you install on the Mac you normally use for printing, enabling it to act as an AirPrint print server. The Mac must be "on" but may be asleep for them to work. The iPad needs nothing else, no iOS apps need to be installed and no configuration is necessary. If your computer can print, so can the iPad, using one of these utilities on your Mac.
Equivalent utilities may exist for PCs but I have no experience with them - I suggest https://www.collobos.com
You can also buy this standalone hardware print server, bypassing the need for a computer altogether:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
Otherwise you will need to buy an AirPrint printer or multifunction device.

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

I Cannot Print From Photoshop CC, Performance is SLOW and TYPE causes a problems.

Hi!
To start, I have noticed HUGE bugs with Photoshop CC on multiple levels on different computers with different setups.
Computer one
Print Issues: I am getting this error message "The saved printer information is not compatible with this version of photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing" and "The saved print information is an incompatible version. It has been set to default values.". I have tried deleting the pref file, updating the printer driver, checking print logs and computer updates. All are up to date and running well. When I hit print, the dialog box comes up but will not allow me to change ANYTHING. So I can only print on an 8.5x11. However if i go into the actual printer preferences and change the default settings there, then go to photoshop and print it will allow me to the size I set the defaults at. I can print from any other program without an issue and I did not have any such problems with CS6. What other causes could be the cause of this and what are your suggestions to fix this? It seems to be a Photoshop bug, which is what I have been reading a lot of. I work off a Dell, windows 8.1 64bit. I would LOVE to downgrade to CS6 but cannot once I upgraded to CC. I did not have this problem when I first upgraded and for a few weeks after.
Performance and Font Issues: This seems(ed) to go hand and hand. But also performance happens more sporadically for some odd reason. The CPU usage and MEMORY went to 100% and photoshop was using 1,860.2 sometimes spiking to 4,000 MB of memory. I searched all the forums and found that my photoshop was not liking a specific font. I removed the font and things started moving faster. Then a few minutes later, it started to lag again with the same type of CPU and MEMORY spike. I then did more research and found that turning off the font preview has helped, so I turned off that. Photoshop started to work A LOT faster, no lag and seemed to function correctly. The 2 weeks ago, I started to experience the lag again (but without the CPU and MEMORY spike) and with only opening certain files to which none had any fonts that Adobe has said doesn't work with photoshop. I then researched again and found that again, the fonts preview when hoovering over the fonts and having the fonts change in the document was giving issues. Alass...there was my issue, again with the fonts. I then did all the research and did what the forums said such as, try using a brand new doc and create a file with out any of the fonts in the old doc to cause conflicts. NOPE. I was having issues in the new doc and getting this error "Could not complete your request because of program error" then photoshop would lock up because of CPU and MEMORY spike.
Computer two:
Same issue as computer one's Performance and Font Issues.
Now, I am no programmer nor do I understand that complexity of what goes in to create these programs, but EVERY ADOBE forum I have read will not admit it's a font issue or that there is a problem with the fonts, BUT my WEEKS of issues and research all keep coming back to FONTS when dealing with performance issues. So how can we get a fix on the fonts issue asap as my team nor I cannot work in the current photoshop because of performance issues?
A quick response would be much appreciated!
Thank you much!
UPDATE: I received a phone call from ADOBE and they said to me that they could send me a CS6 version that i wouldn't have to pay for and would also "Solve My Problem". I said, no thank you being that I have the CC and have access to ALL the programs, so that actually doesn't solve my problem or the overall problem of the CC program. So they escalated my problem and will have someone else respond to me as soon as possible.
Message was edited by: Boh Phillips at 2:38 pm

Quite frankly that’s too much text for me to read in one post … (edit: So consider this more of a bump of the thread than an actual attempt at helping.)
What have you done for trouble-shooting so far?
Troubleshoot fonts | Photoshop CC 2014, CC, CS6, CS5
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Optimize performance | Photoshop CS4, CS5, CS6, CC

Cannot print from hp DeskJet F4580

I have just bought my first MacBook with Mac OS X 10.6.4. Great computer.
However I cannot print from the wireless hp printer. I downloaded the latest driver from hp (maybe a fault) and started to install. Everything went as expected untill the setup process of the Printer Queue. Here I add the printer in order to create the Printer Queue, but when I click on the continue buttom I get this warning: Are you sure you want to continue without adding a Print Queue? I finished the installation with a congratulation sign.
Therefore there is no doubt, that the printer queue is missing. However I cannot found out to install the printer queue.
The printer is a socalled all-in-one printer. The scanner function is perfect with the wireless connection. But not the printer function.
I have also tried to connect via usb cabel. The result is the same. Scanner okay. Printer not okay.
The printer works perfect under Windows.
I hope somebody can help me. Thanks in advance.
Erik

I'm having the same problem ! The wireless printing works using OS 10.5 on a G4 PowerBook but not OS 10.6 on an intel MacBook. I'm going to get in touch with HP as have used the latest drivers (as you have) - I've re-installed the HP software using Software Update for the latest version - still can't print. USB printing is also faulty so must be their drivers.
I'll let you know if I have any luck !
Simon

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

Cannot e-print from my ISP

Similar Messages

Maybe you are looking for