Cannot export avi dv pal upper field dominance

hi all
i have this problem with premiere pro cs5, when i try to export the sequence (made in upper dominance field), i can do it in avi dv pal but i cannot cange the fieldtipe chosing upper, by default premiere choses lower.
in cs4 i can chose wich field use in interlaced mode, here the menu for change that options is locked, i have the same problem if i try to export in quicktime mov dv pal, cannot change the field dominace, a im forget something?
tnx

Yes in CS4 you could choose upper field, but in the end it still was encoded to lower field.
Yes Matrox was a pain in the you know where....

Similar Messages

  • Upper field dominance on progressive footage?

    I shot footage at 1080p, 30 fps. In my FCP sequence the clip properties say there is an upper field dominance...
    Upon outputting my HD footage to SD DVD it looks rather crummy, and there is a green horizontal line on the top and bottom of the screen. Is this why?
    Finally, what is the best, and fastest, way to correct this, if it is, indeed, the problem...
    Thanks for your help...

    If it is progressive, the field dom setting is irrelevant.
    johnlll81 wrote:
    Upon outputting my HD footage to SD DVD it looks rather crummy, and there is a green horizontal line on the top and bottom of the screen. Is this why?
    Because 1080 isn't a multiple of 480 (NTSC) or 576 (PAL) lines. You have a remnant of a line left over with incomplete information. What's the intended delivery method? You certainly won't see those lines on a TV set.
    If it's intended for viewing on the web, use the crop controls in Compressor.

  • Need Some Help! Upper field dominance on progressive footage?

    I am re-posting this because I am in a time crunch and need to try and find a solution...
    I shot footage at 1080p, 30 fps. In my FCP sequence the clip properties say there is an upper field dominance...
    Upon outputting my HD footage to SD DVD it looks rather crummy, and there is a green horizontal line on the top and bottom of the screen. Is this why?
    Finally, what is the best, and fastest, way to correct this, if it is, indeed, the problem...
    Thanks for your help...

    If it is progressive, the field dom setting is irrelevant.
    johnlll81 wrote:
    Upon outputting my HD footage to SD DVD it looks rather crummy, and there is a green horizontal line on the top and bottom of the screen. Is this why?
    Because 1080 isn't a multiple of 480 (NTSC) or 576 (PAL) lines. You have a remnant of a line left over with incomplete information. What's the intended delivery method? You certainly won't see those lines on a TV set.
    If it's intended for viewing on the web, use the crop controls in Compressor.

  • Uprezzing SD to HD, make output upper field dominant?

    Ok, so I'm uprezzing a SD short film originally shot on DV, interlaced, to HD for a film festival. After the uprez, the resulting file will go onto an HDCAM tape for broadcast at the fest. I want to keep the interlacing as the crappy video look is part of the story.
    So, that being said, I hear all HD is upper field dominant, while my clip settings and and sequence in FCP for the original SD movie are lower field dominant. In compressor, do I want to change the settings so the output file is upper field dominant since it will be HD, or leave it as is to match the source material (lower field)? Furthermore, there are two places to set field dominance in compressor, one under the encoder tab, after pressing the "video settings" button (if interlaced is checked), and another under the frame controls tab. Do I set both to upper/lower field dominance, or is one telling it what the source footage looks like and the other is for the output file? Thanks.

    OK, here you are,
    Original footage :
    Original Footage Interpretation:
    Render Settings :
    Output Module Settings :
    Format Options :
    Re-imported Footage :
    Interpretation of re-imported footage :
    The End and Thanks~~

  • Why Would Upper Field Dominance Change The Quality Of My SD So Much?

    I did a shoot in SD and edited it as such of course. The thing is when I was done, all of my slow motion looked echoy (a plague of mine if you're not familiar with my posts) and generally looked a bit lower quality then even SD usually gives. So I freaked out (finally) and found a guy on line that suggested changing the field dominance to Upper and to make sure that I have my Video Processing set to "Fastest Linear". Now this was a guy that has had this posted for a couple of years, so it wasn't like he actually told me this directly.
    Well, it worked. The video looks good, slow motion is nice and smooth. Just for fun, plus the fact that I don't have a clue what I'm doing, I decided to see what it would look like leaving the processing the to Fastest and change the dominance to lower, and behold, the cruddy video plague of mine returned. It seems like everywhere else I look, people say not to do this, but it worked. Why? I do know what the dominance of upper and lower are, I'm just not smart enough to know why it worked and I want to learn this badly. For example, would I do this same dominance for HD?
    Thanks again guys,
    Crayton

    I filmed it in SD on my Sony HDV-AU1 camera. What is killing me is if I choose upper then the footage looks fine, but then what I have done is add some jpeg images that I created in photoshop on a PC. they are simple images of text that say "Round 1" or "Round 2" in between the fights. I have them spin into view using one of the transitions in FCP, but when I get it to dvd, they look horrible, echoy, just like the footage looked like before I changed it to upper field. So as it looks now, I can't have both look good i guess. This doesn't make sense to me!! It is incredibly frustrating especially since I'm out of money and almost out of time on this project (it has to be done by next week). I keep re-doing the project, re-building it, re-setting it in one type of sequence after another and it's not looking good at all. what am I doing wrong?

  • Field order on DVD Video disk projects - cannot output ".VOB" with upper field first,,

    Can anyone help ? - in Australia most DVD players (PAL) display the best video image in terms of picture quality and motion smoothness when the "VOB" files created on the DVD Video disk (for PAL), are Upper field first. I can only get "VOB" files with Lower field first from Premiere Elements 9.0.
    I have spent many hours experimenting, and then 90 minutes talking to Adobe support who were very helpful - but unable to resolve the issue.
    My Premiere Elements 9.0 has been updated to 9.0.1, but I am still unable to obtain VOB's with Upper field first. The resultant DVD's are not easy to watch.
    (MPEG files can be created with Upper field first from the "Advanced" button - but there is no Advanced button on the Blu Ray/DVD option in the "Share" tab.)
    Thanking you, Dave.

    Hi Steve, Yes - the output VOB's are lower field first, this can be observed
    as "fuzzy" picures when playing the resultant DVD on a DVD player - the
    motion is slightly jerky as well making for a video that is rather hard to
    watch for too long - like trying to read without glasses (if you need them).
    The input files are 720x576 16:9 PAL - Upper field first.
    I have verified that the output VOB's are lower field first, using other PC
    based video players and viewing the "properties" of the file.
    Also, after spending about 90 minutes on the phone to Adobe support, and
    exhausting all possible variations of project settings with them - they
    confirmed the VOB's are output as lower field first in PAL format and were
    of the opinion that one could not output PAL Upper field first VOB's using
    Premiere Elements 9.0/9.0.1.,
    This is rather disappointing as from what I understand the Australian
    standard is PAL Upper field first (720x576) 25fps. They suggested that I put
    in a submission to the "Wish List", which I have done - no response yet.
    Thanks, Dave.

  • Any Experts on Field Dominance?

    There are a lot of threads on these forums concerning HDV footage turning out really bad footage when outputted to DVD (worse than using an SD source). The problem seems worse for those working in PAL. Here's my theory as to why PAL users seem to be suffering with this problem more:
    HD is upper field dominance, PAL SD is lower. So a PAL based conversion from HD to SD involves resizing AND field shifting.
    If you export a HDV sequence from FCP to Compressor (using any method), then compress using default settings, Compressor outputs an upper dominance file still. This must mean DVD SP (or Toast, etc) are converting from upper to lower before it burns the DVD.
    We all know DVD SP does a crap job at compressing anything remotely hard, so why are those of us in PAL land trusting is to do field conversions? Is this conversion actually hard, or am I worrying about nothing?
    Starting out with HD definitely makes worse PAL DVDs than starting out with SD footage, so which conversion/step is causing the problem?
    If I set compressor to output a lower dominance field, the DVD ends up with unwatchable flicker in the movement, so I tried conforming the clips to a new lower dominance HDV sequence, meaning FCP is doing the field conversion. Movement is 100%, but the quality is still down a little (jagged edges). I might have to turn Frame Controls on in Compressor and let is spend 12hrs compressing a sequence already converted to lower field by FCP.
    So, I think I may have deduced that FCP is crap at downconverting. Compressor and DVD SP are crap at converting to lower field dominance. Compressor is crap at downconverting unless it's set to PAINLFULLY SLOW (ie frame controls on with Resize Filter set to better quality).
    Anyone got any comments or thoughts? Am I remotely on track or way off?
    Cheers
    Dav

    Sorry, I haven't had time to read your post carefully as I am dashing out, but I came across the problem over 2 years ago.
    Here are some notes I jotted down at the time, mainly with reference to using iDVD as the problem more or less disappeared when encoding with Compressor.
    +1. Edit your HDV/AIC in the timeline. Then create a new DV-PAL (NTSC) Anamorphic sequence. Copy your edited HDV/AIC to the new sequence. Do not alter anything. Render the sequence ..... this will take a long time - up to twice the length of the project. Then File>Export>QuickTime Movie (Not Self-contained).+
    +However, if you use the QT Movie in iDVD you will get a squashed 4:3 movie, so first of all you must make QT stretch it out to its proper 16:9 dimensions like this:-+
    +a. Open the exported movie file in the QT Pro player.+
    +b. Go to Window>Show Movie Properties.+
    +c. Select the "Video Track" and in the "Visual Settings" panel uncheck "Preserve Aspect Ratio".+
    +d. In the "Scaled Size" box set the width to 1024 pixels for PAL or 853 for NTSC.+
    +e. The "Video Track" will have turned grey, so click it to make it blue again.+
    +f. The opened movie file will jump to 16:9.+
    +g. Close it with the red button and click Save.+
    +2. This method is fast. Set your HV20 to "Locked DV" which means that FCE/FCP will capture it as anamorphic DV and edit it as standard definition anamorphic DV. (Use Easy Setup ... DV-PAL (NTSC) Anamorphic).+
    +You can then Export>QuickTime Movie to be used in iDVD and use the stretching technique mentioned above.+
    +An alternative to clicking the grey video track is to simply enter "576" in the height box and this should make the opened video file jump to 16:9, whereupon clicking the red button of the video should give you the window allowing you to "Save".+

  • Field Dominance settings for rough edit

    I'm working on a project that will be finalized in HD elsewhere from a variety of sources, HDcam, Targa files, SD, etc. I'm doing the rough edit and will export an EDL (possibly through Automatic Duck to be finalized in Avid, not sure about that yet). I'm not doing any effects, just getting the right clips in the right order. I'm working from DVcam dubs only (firewire import)of the source material. I know the post house already has some of the HD material on hand and it is upper field dominant. DVcam of course is lower field dominant. Do I need to change the settings to upper field or not set, or is this something the post house will deal with when it imports the final video?

    Don't change any settings... it won't affect the EDL anyway.
    Jerry

  • Offline To Online Changes Field Dominance Settings?

    Hi - I have an offline DV PAL sequence that I am taking online to 10-Bit Uncompressed PAL.
    To my understanding PAL is Upper field dominance, and all my sequences and source files in the offline DV project are upper. However when I check the Uncompressed online project, many of the files (subclips especially) are set to Lower.
    My question is this - since it's easy to change fd for clips by just right clicking in the browser, if I just set the incorrect clips' Field Dominance to Upper and make sure the shift fields filter is not enabled, can I be certain there will be no field dominance issues?
    Maybe more importantly - what is the best way to determine if you have any field dominance issues? Is simply watching it on a monitor/television going to be obvious if something is wrong? Any way to check on the computer?
    Thanks everybody,
    Jason
    G5 Quad 2.5Ghz, 30" Cinema HD Display, Final Cut Studio, CS2 Suite   Mac OS X (10.4.9)   Powerbooks, other Powermacs, iBooks, iMacs, etc...

    Field dominance depends on the format, not the standard (pal,ntsc).
    DV is lower field dominant be it PAL or NTSC, and uncompressed is upper field dominant.
    For true monitoring, you'll need to view your image through an external broadcast monitor... a CRT television should be suitable for monitoring field issues (i believe... i'm sure i'll be corrected if that's wrong).
    The only obvious thing to look for is 'combing'... the lines (fields) that appear around the edges of a subject on the screen, especially when there is a lot of on-screen movement.
    Just out of curiosity... why are you taking a DV sequence into 10-bit uncompressed? Doing graphics etc?
    J

  • Field dominance upon import into fcp problem

    having changed the project setttings in livetype to comply to pal video with lower field dominance so that i can use it in my dv-based projects, i've tried both to open the livetype project directly into final cut pro and also to render the movie in livetype and import that into final cut pro.
    in both cases, fcp sets field dominace to upper field.
    on the cinema display lcd screen that doesn't seem to make any difference, but surprises lurke when outputting to dvd ....
    in an attempt to bypass the problem i've changed project settings to 'none' and rendered the movie again.
    in this case too, fcp insists the imported movie is upper field dominant...
    is this an annomality in fcp's import routines and does it assume that all pal video that is not dv is upperfield dominant or is there a setting in eithere program that can fix this problem?
    livetype 2.02
    fcp 5.0.x
    thanks

    Is your drive formatted macosextended?  Can you edit bars and tone into a new sequence?  What happens if you duplicate an existing sequence, select all and delete?  Can you then edit into this sequence?
    Have you tried deleting your fcp preferences?  Get preference manager from www.digitalrebellion.com to do this.
    Have you installed or updated any new software or hardware on your system recently?

  • HDV to DVD-Change Field Dominance Or Not?

    A search I did recently pointed to this article:
    [http://www.larryjordan.biz/articles/bkhdvconvert.html]
    The author claims that when exporting an HDV sequence from FCP to Compressor, he changed the default field dominance from Upper to Lower, resulting in a better quality DVD, smoother motion, etc.
    There wasn't anything wrong with my HDV exports using the default upper dominance, but I decided to try it, just looking to squeeze out any improvement I could.
    The results were terrible; awfully jerky motion, dot crawl across the top of the image, etc., so I went back to using the default.
    But then I thought, I wonder if the improvement the author saw was because he exported an HDV Quicktime Movie first, then put that into Compressor and switched the field dominance . . .
    I usually export my HDV timeline right out of FCP to best quality DVD in Compressor, without the in between step. Just wondering if anyone else has tried it the way it's mentioned in the article, and if it's made a difference for them.

    Wow, this thread was way back there;
    Anyway, I use a Sony V1U, and shoot 1080i60, and I had been getting acceptable results, but was just looking for a bit more detail.
    After reading the article, I sent a finished project to Compressor both ways; 1st with the default upper field dominance, and then again changing it to lower, as the article recommended. The default upper file looked pretty good, but the 2nd time with it on lower looked terrible; all kinds of motion displacement.
    I've been using the default since, and have not tried it the other way since that first time. When I get time, I'd like to try exporting a QuickTime movie first, then put that into Compressor with the switched lower dominance to see if there's any improvement that way. I usually just export directly to Compressor from the timeline.
    I appreciate the comments, and I'm always interested in any setting changes that might squeeze out some more detail when going from HDV to DVD.

  • PremierePro file save as AVI DV PAL compression

    Hello!
    I' am working in Premiere Pro CS4 and would like to make AVI DV PAL compression from my Premiere Pro file (DV PAL, size 32010 KB, video lenght is 2 min, video made from PSD (Photoshop CS4 EXTENDED) photographies puttet in Premiere Pro file in meny sequences, video have sound), but when i click FILE>EXPORT>AVI, DV PAL or else>OK then appears window what looks same as SAVING WINDOW where shoes howe much time left, just in place of SAVING is written EXPORTING, but when that little window ends, then nothing happens - in computer nouwhere i can find any file what was needed to be maked in that exporting process. I would like to know, ehat to do to have my Premiere Pro file as AVI DV PAL compression. I think there needed to be automatically opening ADOBE MEDIA ENCODER.
    Best reguards
    Ilvija

    P.S.
    When i opened ADOBE MEDIA ENCODER from folder in computer, but not from Premiere Ro CS4, than is error message:
    "       ADOBE MEDIA ENCODER.EXE - ENTRY POINT NOT FOUND.
                The procedure entry point"
                ??0NewHandlerInitializer@ErrorManager@config@dvacore@@QAF@X
                Z could not be located in the dynamic link library dvacore.dll.                       "

  • Field-Dominance automatically 'Upper', how to change?

    Hi!
    Recently I discovered that the Field Dominance (FD) setting of my sequence/projects is automatically 'Upper'. Also when I capture from VHS, the FD of the clips in my project is always 'Upper'.
    But most of the time I want the FD to be 'Lower', because I often use PAL and DV.
    I've searched the Preference menu and the FCP User Manual, but I cannot find an option where I can set the FD standard to 'Lower'.
    Is there such an option or do I need to change the FD manually every time?

    I think so long as everything is the same field dominance and matches to your settings you're okay. The first time I came across the problem was importing DV PAL (lower ) into a sequence that was mostly SP Beta PAL (Upper) and the sequence was set for 8 bit uncompressed PAL (upper). The flickering of the DV PAL footage was only evident on the external monitor, it looked fine on the computer screen and it didn't matter how much I rendered or tried flicker filters it just wouldn't change. The only thing that worked was the Nattress "Field" plug in. It's in Filter Set 1 - http://www.nattress.com/set1.htm

  • Field order issues after export to DV Pal from uncompressed

    We are experiencing some difficulty exporting clips from FCP to our Omneon Server for TX.
    We are capturing 8 bit uncompressed (AJA and Blackmagic) from digibeta for our edit and all editing stays in uncompressed until final output. Our transmission system demands DV PAL files so we export finished items as DV PAL in FCP and drop onto the server
    Our problem is that on playback from the server, the field order is incorrect. Although the exported DV clips properties show lower field order, the clip is obviously playing upper field first. If we capture and edit in DV and export the DV file to the server, then we have no problems. I have tried
    exporting uncompressed clips to DV via Compressor and changing the field order in frame controls but no success. It seems that when a clip is captured and edited in upper field it hangs onto that status even after conversion to DV!! Any thoughts greatly appreciated!

    when you drop one of your 8 bit uncompressed source clips into your DV PAL timeline, is FCP correctly adding the Shift Fields filer to those timeline instances?
    do you edit in 8-bit uncompressed and then export direct to DV PAL or do you nest your 8 bit uncompressed sequence into a DV PAL sequence first and then export as Quicktime Movie w/ current settings? if not the latter, try it (and make sure your nest has the Shift Fields filter applied)

  • PAL FIELD DOMINANCE

    Hi working in NTSC , I don't know about PAL, so here is my question:
    What is field dominance in pal ( upper or Lower)
    Thanks for your time
    See ya!

    Just checking archives and found a post from G Nattress
    "DV PAL, DV NTSC, DV50, DVCproHD all lower,
    HDV upper,
    PAL uncompressed SD upper,
    NTSC uncompressed SD is lower - I'd check the easy presets in FCP to be sure, although it could be hardware dependent on what you're capturing with.
    Not sure on DVD field order, but compressor usually gets it right if you tell it what the source is.
    Graeme"
    Question answered!

Maybe you are looking for