Cannot export to Quicktime anymore. Please help.

Hi all,
I did some maintenance on my computer recently and now I can no longer export to Quicktime format.  The maintenance involved deleting old footage plus a bunch of "Media Cache Files," which were taking up nearly 90 gigs of space.  90 gigs!  I guess over the years it built up!  This was the first time I ever messed with these files, in fact I didn't even know they existed until recently.  I found them within the following file structure:
AppData > Roaming > Adobe > Common > Media Cache Files
I did some research before deleting them and everything I read said it was ok to do so, but ever since I haven't been able to export to QT in Premiere Pro or After Effects.  Premiere gives me the error message, " Unable to create or open output file."  I reinstalled QT, but that didn't help.
I normally don't export to Quicktime format unless I'm doing some animation projects in After Effects, which is what I'm working on now.
Any help is much appreciated.
Thanks,
Matt

I've tried changing the export destination, but that doesn't help, and I don't have a problem exporting to other formats.
I've never tried using AME as a convertor.  I'm not sure that's the ultimate solution to my problem, but I'm curious enough to give it a try.  How would I do that?

Similar Messages

  • Itunes cannot find my library anymore please help

    Please help!!
    I recently installed a new internal hard drive and my itunes library was installed on an external hard drive and when i rebooted my pc after the new drive was installed my drive letters changed and itunes could no longer locate my library.
    I had around 38,000 tracks in the library along with aps etc and i cannot seem to locate or load that library anymore.
    I have tried renaming all the drives (internal and external) to the drive letters they were before i put the new drive in but it has made no difference.
    System restore doesn't seem to fix it and when itunes opened after the reboot it started adding some tracks but not all.
    Please Please Help

    Search your drives for files of the type *.itl
    When you have identified the one that should be your library hold down the shift key and click the icon to start iTunes. Keep holding until asked to choose or create a library. Click choose and browse to the file you found earlier.
    If your library was all properly self-contained then "It just works"TM otherwise post back with the details of the path to your media folder and I'll show you how to fix things.
    tt2

  • Exporting to QuickTime difficulties (PLEASE HELP)

    I would like to start off by saying that Keynote 08 is an amazing presentation tool. I would like to convert the presentation that I have created and put it on a CD since all the transitions and the build in's and out's are set automatically. The presentation is currently set to a slide size of 1680 x 1050 and consist of 25 slides with about 17 them with full screen video playing. I have exported to QuickTime on numerous of times but for some reason or another it just doesn't export it with the full quality. Quicktime at times will get stuck as it is doing the presentation and it doesn't always follow the background music I have set. Sometimes it will finish before the song and sometimes the presentation will finish and the song will be interrupted by being cut short. When I export I'm currently using the manual advances and the Full Quality Large format. I only checked off the "include the slideshow soundtrack" option but like I said, the soundtrack doesn't completely always follow the presentation. PLEASE HELP! This is my company presentation and I have received a lot of positive feedback but I want to take it to the next level by making them in a DVD. Again, PLEASE HELP!

    Had the same problems as Albert8119. My presentation had five slides of varying length, each with multiple builds, also of varying length. Had a music presentation in the background of the presentation, together with individual voice-overs to each slide. As a Keynote presentation it was fine; so much so that the client asked for both QT movie and iDVD copies on disk. Exporting to either proved to be an absurdly complex task (it should be easy!) as timing in builds and transitions went awry. Eventually, after much experimentation, I found that lengthening the builds (often by several seconds) resulted in excellent QT movie and IDVD. It is a pity that such an excellent presentation program (leaving Powerpoint for dead) should come up short at that point. Apple can do better than that. Next time I'll try King_Leo's solution.

  • TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

    when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
    i need to submit this movie for uni project tomorrow.
    any help/advice will help . thanks.

    According to Crash Analyzer
    -50 (QuickTime)
    This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
    good luck

  • HT1339 After i Updated itunes al my ipod apps including safari and music, photos and all of them went away and i cannot do anything on it anymore please help?

    After i Updated itunes al my ipod apps including safari and music, photos and all of them went away and i cannot do anything on it anymore please help?

    - Try a reset. Nothing is lost:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Can you find the apps using the Spotlight search on the iPod? Maybe you just can't find them
    - If you can find them you can reset the screen layout by go to Settings>Genera.Reset>?Reset Screen Layout.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that.  Can someone help?
    Elaine

  • I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.

    I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.

    You may want to try restarting to see if that has any effect Turn your iOS device off and on (restart) and reset

  • I have the 10.7.4 and I cannot get the Flash Player ,, please help me.

    I have the 10.7.4 and I cannot get the Flash Player ,, please help me.

    If you downloaded it, it's likely in your Downloads folder as a Disk Image .dmg. Just open it and intall Flash player and restart your browser. Everything should work.
    Clinton

  • I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.

    I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • I have dowloaded Photoshop + Lightroom (subscription) but no serial number have been provided for Photoshop CC so I cannot access the product. Please help

    I have dowloaded Photoshop + Lightroom (subscription) but no serial number have been provided for Photoshop CC so I cannot access the product. Please help

    Thank you Steve. Will do it straight away.
    We can can continue talking this evening, no prob.
    Rgds
    Marco
    Il giorno 16/mag/2014, alle ore 19:12, SG... <[email protected]> ha scritto:
    I have dowloaded Photoshop + Lightroom (subscription) but no serial number have been provided for Photoshop CC so I cannot access the product. Please help
    created by SG... in Photoshop General Discussion - View the full discussion
    Hi,
    When did you make the purchase? Can you try signing out of the CC desktop app, and then signing back in?
    I'll see if I can get direct support sent your way as well. How much longer are you available for this evening? We can communicate directly as well if you prefer.
    regards,
    steve
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6385161#6385161
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

    Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

    You're welcome.
    There are a couple of issues connected to it:
    http://www.vektorgarten.de/problems-align-to-pixel-grid.html
    I don't think that list is complete

  • When I try to download my updates it keeps saying cannot connect to iTunes store please help I'm going mad!

    When I try to download my updates it keeps saying cannot connect to iTunes store please help I'm going mad!

    a lot of people have posted about this and i have seen one weird thing fix this. people said they where going into date and time under settings and changing  the date to some time in the future and then going to the itunes store and it would give them an error that there date and time was wrong. then all you need to do is go back and set the date and time right and go back to the itunes store and try again.
    Im not sure why this did the trick but a bunch of people said that this helped them out..... Weird i know
    You might want to see if it fixes your problem.

  • I have a 2007 macbook that is stuck on the loading page and after a while it shuts down by itself. I don't know what to do anymore please help!!!

    I have a 2007 macbook that is stuck on the loading page and after a while it shuts down by itself. I don't know what to do anymore please help!!!

    Hello Sebas4224
    Start with the article below to troubleshoot issues with your MacBook starting up and staying on. Let me know how it goes in case it does not help and I or others can assist you further.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Regards,
    -Norm G.

  • I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

    I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

    The way I resolved this issue was to create a dual boot Mac, so that I am able to boot from either Mountain Lion or Mavericks. Running Vectorworks in a virtual machine just didn’t cut it.
    I had already upgraded to Mavericks, which meant that trying to install OS 10.8.5 as a second operating system produced the error message saying it cannot be installed on this computer.
    First, if you need a copy of Mountain Lion installer and you has previously purchased it, open the App Store app, press the option key and then click on the purchases tab. You will see a list of all downloaded software from Apple and you can download OS 10.8.5 again without paying for it a second time. If you had previously created a boot disk of Mountain Lion, which I had not, you can obviously skip this step and the next.
    You will need a boot disk for Mountain Lion. After downloading the Mountain Lion installer, the easiest way to create a boot disk is to use a slick little app called DiskMaker X, which you can get here: http://liondiskmaker.com  Next you will need a USB flash drive of at least 8GB in size. Install and run DiskMaker X, plug in your flash drive, and follow the prompts. In just a few clicks, your boot drive will be easily created.
    Next, you will need to add a partition on your startup drive on which you will install Mountain Lion. Here is the procedure for creating the new partition: http://macs.about.com/od/applications/ss/diskutilitysize.htm  You can find this at Apple support, but this site gives you additional procedures that may be helpful. I set my new partition at 50 GB, but you can do with less is you don’t have the space.
    With those two operations done, and your OS 10.8.5 boot drive plugged in, restart you Mac and press the option key after you hear the chime. You will be asked which drive you wish to start from- select the boot drive. After your Mac boots up, you will see several options- choose install Mountain Lion (actually I think the option is reinstall Mountain Lion).
    After completing the OS install, install your copy of Vectorworks, copy and move whatever files you need to from Mavericks, and you are in business. To boot from either OS, simply press the option key and select OS 10.8.5 when you need to work in Vectorkorks, or OS 10.9 for all your other tasks. Switching back and forth isn’t as advantageous as otherwise, but it is the best way to run Vectorworks without upgrading for the $1,500 or so that would be required otherwise.

  • My Canon MP620 appears to be connected, yet every time I try to print something, it says error.  I have tried to unplug and track the error, but I cannot figure out why. Please help! this is such an inconvenience!

    My Canon MP620 appears to be connected, yet every time I try to print something, it says error.  I have tried to unplug and track the error, but I cannot figure out why. Please help! this is such an inconvenience!

    What Mac model? What Mac OS version?
    FYI, this forum is for Apple hardware made before 1999.

Maybe you are looking for