Cannot find a token authenticator for the 'System.IdentityModel.Tokens.X509SecurityToken' token type. Tokens of that type cannot be accepted according to current security settings.
i am using a custom binding in the BTS Adapter with the following elements (similar to TransportWithMessageCredential with both the client and the server certs)
encoding (soap11)
https transport
Security : CertificateOverTransport
Problem: the request is sent successfully, but when i receive the response in BizTalk i get the following error
System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party. ,after turning on tracing in the WCF Trace the following error is present "Tokens of that type
cannot be accepted according to current security settings. "
Solutions tried
1) Changed the security to MutualCertificate , this time request also fails with the following error message The remote endpoint did not provide a domain name system (DNS) claim and therefore did not satisfied DNS identity 'xxxx.com'.
This may be caused by lack of DNS or CN name in the remote endpoint X.509 certificate's distinguished name.
Binding configuration
<behaviors>
<endpointBehaviors>
<behavior name="EndpointBehavior">
<clientCredentials>
<clientCertificate findValue="XXXXXXXXXXXXXXX" x509FindType="FindByThumbprint" />
<serviceCertificate>
<defaultCertificate findValue="XXXXXXXXXXXX" storeName="TrustedPeople" x509FindType="FindByThumbprint" />
<authentication certificateValidationMode="None" revocationMode="NoCheck" />
</serviceCertificate>
</clientCredentials>
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior" />
</serviceBehaviors>
</behaviors>
<bindings>
<customBinding>
<clear />
<binding name="XXXXXXXXX">
<textMessageEncoding messageVersion="Soap11" />
<security allowSerializedSigningTokenOnReply="true" authenticationMode="CertificateOverTransport" requireDerivedKeys="false" securityHeaderLayout="Lax" messageSecurityVersion="WSSecurity10WSTrust13WSSecureConversation13WSSecurityPolicy12BasicSecurityProfile10"
requireSecurityContextCancellation="false">
<secureConversationBootstrap />
</security>
<httpsTransport />
</binding>
</customBinding>
</bindings>
Thanks -Madhu
Please refer to the similar discussion:
http://social.msdn.microsoft.com/Forums/en-US/6a3d38ee-30ca-43fb-b906-6e95808df69d/cannot-find-a-token-authenticator-for-the-systemidentitymodeltokensx509securitytoken-token?forum=wcf
Similar Messages
-
My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime. -
Radius authentication for the browser-based webtop
Hiya all,
With help of the radius-authentication module for apache (http://www.freeradius.org/mod_auth_radius/) and web-authentication it is possible to use radius-authentication for the classic-webtop. Has anyone got Radius authentication working for the browser-basedwebtop?
SSGD version:
Sun Secure Global Desktop Software for Intel Solaris 10+ (4.30.915)
Architecture code: i3so0510
This host: SunOS sgd1.<removed> 5.10 Generic_118855-36 i86pc i386 i86pc
I have the radius-module running for authentication of a single directory with the apache-config-lines:
SetEnvIf Request_URI "\.(cab|jar|gif|der)$" sgd_noauth_ok
<LocationMatch "/secure">
Order Allow,Deny
Allow from env=sgd_noauth_ok
AuthName "Radius authentication for SGD"
Authtype Basic
AuthRadiusAuthoritative on
AuthRadiusCookieValid 540
AuthRadiusActive On
Require valid-user
Satisfy any
</LocationMatch>
When changing the line <LocationMatch "/secure"> to <LocationMatch "/sgd"> the browser asks for a authentication and then a 'Not Found' page is being displayed.
When using the config-lines from http://docs.sun.com/source/819-6255/webauth_config_browser.html the login-page is being displayed normally and SSGD works.
The main difference I can find between the location /secure and /sgd is: /secure is a simple directory and /sgd is a JkMount to Tomcat.
Changing the JkLogLevel to debug gives the following info in the JkLogFile:
Radius authentication:
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (449): Attempting to map URI '/sgd' from 5 maps
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/examples/*'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/axis/*'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/sgd/*'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/axis'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/sgd'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (486): Found an exact match tta -> /sgd
With the password-authentication file:
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (449): Attempting to map URI '/sgd/' from 5 maps
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/examples/*'
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/axis/*'
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/sgd/*'
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (475): Found a wildchar match tta -> /sgd/*
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_get_worker_for_name::jk_worker.c (111): found a worker tta
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_maintain::jk_worker.c (301): Maintaining worker axis
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_maintain::jk_worker.c (301): Maintaining worker tta
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_maintain::jk_worker.c (301): Maintaining worker examples
It seems that the JkMount is not being evaluated correctly after using the radius-authentication.
Any help will be usefull since I am allready stuck on this problem for a couple of days :(
Thanks,
Remold | EverettI got response from the Fat Bloke on the mailing list.
Adding the following line in the apache httpd.conf seams to help and resolved my problem:
Alias /sgd "/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/webapps/sgd"
Thanks The Fat Bloke !!
- Remold
These instructions are for a 4.2 SGD installation using SGD's third
party web authentication with mod_auth_radius.so (www.freeradius.org).
With 4.2 Sun didn't distribute enough of the Apache configured tree
to enable the use of axps to build the mod_auth_radius module, 4.3 is
better - Sun now install a modified axps and include files, I haven't
tried this with 4.3 yet though.
I built the mod_auth_radius module for Apache 1.3.33 (shipped with 4.2)
So, this is how we got this working with Radius (tested with SBR
server and freeradius.org server.)
Install SGD in the usual way.
Enable 3rd party authentication:
According to:
http://docs.sun.com/source/819-4309-10/en-us/base/standard/
webauth_config_browser.html
Configure the Tomcat component of the Secure Global Desktop Web
Server to
trust the web server authentication. On each array member, edit the
/opt/tarantella/webserver/tomcat/version/conf/server.xml file. Add the
following attribute to the connector element (<Connector>) for the
Coyote/JK2 AJP 1.3 Connector:
tomcatAuthentication="false"
# cat /opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/
conf/server.xml
<!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
<Connector port="8009" minProcessors="5" maxProcessors="75"
tomcatAuthentication="false"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
"By default, for security reasons, Secure Global Desktop
Administrators can't
log in to the browser-based webtop with web server authentication.
The standard
login page always displays for these users even if they have been
authenticated
by the web server. To change this behavior, run the following command:"
# tarantella config edit --tarantella-config-login-thirdparty-
allowadmins 1
Without this, after authenticating via webauth, the user will be
prompted for a
second username and password combination.
# /opt/tarantella/bin/tarantella objectmanager &
# /opt/tarantella/bin/tarantella arraymanager &
In Array Manager:
Select "Secure Global Desktop Login" on left side and click
"Properites" at bottom
Under "Secure Global Desktop Login Properties"
cd /opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/conf
edit httpd.conf:
### For SGD Apache based authentication
Include conf/httpd4radius.conf
at the end of httpd.conf add:
Alias /sgd "/opt/tarantella/webserver/tomcat/
5.0.28_axis1.2final_jk1.2.8/webapps/sgd"
# cat httpd4radius.conf
LoadModule radius_auth_module libexec/mod_auth_radius.so
AddModule mod_auth_radius.c
# Add to the BOTTOM of httpd.conf
# If we're using mod_auth_radius, then add it's specific
# configuration options.
<IfModule mod_auth_radius.c>
# AddRadiusAuth server[:port] <shared-secret> [ timeout [ : retries ]]
# Use localhost, the old RADIUS port, secret 'testing123',
# time out after 5 seconds, and retry 3 times.
AddRadiusAuth radiusserver:1812 testing123 5:3
# AuthRadiusBindAddress <hostname/ip-address>
# Bind client (local) socket to this local IP address.
# The server will then see RADIUS client requests will come from
# the given IP address.
# By default, the module does not bind to any particular address,
# and the operating system chooses the address to use.
# AddRadiusCookieValid <minutes-for-which-cookie-is-valid>
# the special value of 0 (zero) means the cookie is valid forever.
AddRadiusCookieValid 5
</IfModule>
<LocationMatch /radius >
Order Allow,Deny
AuthType Basic
AuthName "RADIUS Authentication"
AuthAuthoritative off
AuthRadiusAuthoritative on
AuthRadiusCookieValid 5
AuthRadiusActive On
Require valid-user
Satisfy any
</LocationMatch>
SetEnvIf Request_URI "\.(cab|jar|gif|der)$" sgd_noauth_ok
<LocationMatch /sgd >
Order Allow,Deny
Allow from env=sgd_noauth_ok
AuthType Basic
AuthName "RADIUS Authentication"
AuthAuthoritative off
AuthRadiusAuthoritative on
AuthRadiusCookieValid 5
AuthRadiusActive On
Require valid-user
Satisfy any
</LocationMatch>
Put appropriate mod_auth_radius.so into
/opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/libexec
# mkdir /opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/htdocs/radius/
# cat /opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/htdocs/htpasswd/index.html
<HTML>
<HEAD>
<TITLE> Test Page for RADIUS authentication </TITLE>
</HEAD>
<BODY>
<B> You have reached the test page for RADIUS authentication.
</BODY>
</HTML>
I hope this helps!
-FB -
I am experiencing this error when a servlet or JSP is preloaded on the web
server and the init method of the preloaded item results in a call to the
app server. If I don't preload and then manually invoke the JSP or servlet
after the web server completely loads the call to the app server does not
produce the exception. The only security differences between the web and
app servers are the console and system passwords. I can fix the problem by
making the passwords (system and console) the same across the board, but
find it hard to believe that this is the true solution. I would prefer
sticking with the default security settings.
I've poured through hundreds of messages. I can find similar problems but
not this exact problem.
Any ideas would truly be appreciated!
More information:...
App and Web server are both wls 6.1.1.0 running on the same SUN Solaris box.
Both are using the basic, out of the box, security.
The App server has SSL disabled.
The exception reported in the app server's log is:
java.lang.SecurityException: Authentication for user system denied in realm
wl_realm
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at
weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.security.acl.internal.Security.verify(Security.java:87)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:235)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:2
2)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
The exception reported in the web server's log is:
java.lang.SecurityException: Authentication for user system denied in realm
wl_realm
at
weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.
java:85)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:255)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:222)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy54.lookup(Unknown Source)
at
weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at
com.qwest.tmmt.manager.client.MDMAdapter.getEJBHome(MDMAdapter.java:197)
at
com.qwest.tmmt.manager.client.MDMAdapter.<init>(MDMAdapter.java:64)
at
com.qwest.tmmt.manager.client.ManagerFactory.createMetaDataManager(ManagerFa
ctory.java:305)
at
com.qwest.insite.util.ClientMetaDataCache.<init>(ClientMetaDataCache.java:53
at
com.qwest.insite.util.ClientMetaDataCache.getInstance(ClientMetaDataCache.ja
va:106)
at
com.qwest.insite.metadata.startup.MetaDataServlet.init(MetaDataServlet.java:
30)
at
weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java
:700)
at
weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.ja
va:643)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.jav
a:588)
at
weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletC
ontext.java:2203)
at
weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServlet
Context.java:2147)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.jav
a:884)
at
weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.j
ava:807)
at
weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:421)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:160)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at
weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:
76)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy33.addWebDeployment(Unknown Source)
at
weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeploymen
t(WebServerMBean_CachingStub.java:1094)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:315)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deployment
Target.java:279)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(D
eploymentTarget.java:233)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploym
entTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy32.updateDeployments(Unknown Source)
at
weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(
ServerMBean_CachingStub.java:2734)
at
weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(Appl
icationManager.java:362)
at
weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManage
r.java:154)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy45.start(Unknown Source)
at
weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(
ApplicationManagerMBean_CachingStub.java:480)
at
weblogic.management.Admin.startApplicationManager(Admin.java:1151)
at weblogic.management.Admin.finish(Admin.java:570)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:506)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
Thanks,
Jed ZimmerYou're correct. I meant the DOMAIN_SYSTEM_PASSWORD password in my
<domain-name>domain.ksh file. The DOMAIN_SYSTEM_PASSWORD value (if
specified) has to match the system user's password or else the server will
not start/stop.
I have determined more since my post. A startup class also produces the
same error. I have minimized my environments as follows and still receive
the exception, and a soon as I synchronize the system users' passwords on
the app/web server the problem goes away. Or, I can keep the passwords
different and just not access the app server EJBs until after the web server
finished loading, which also causes the error to go away. I'm just confused
about what I might be doing wrong.
Steps to produce the error:
App server:
- Installed from 6.1.1.0 from scratch and started it up.
- Changed the system user's password from the admin console, persisting the
changes.
- Modified logging settings to see more info in the log files.
- Disabled instrument stack traces.
- Stopped/Started the app server
Web server:
- Installed from 6.1.1.0 from scratch and started it up.
- Modified logging settings to see more info in the log files.
- Disabled instrument stack traces.
- Added a servlet to the DefaultWebApp_insiteserver application
- specified name and class
- the load on startup setting defaulted to zero, which will cause the
preloading
- Added 3 jar files to the classpath to support the EJB call
- Stopped/Started the web server
When the web server loads the servlet loads and tries to locate the EJB on
the app server. The app server throws the security exception. The app/web
servers are both running on the same SUN box, have the same IP address
(different ports) and I'm using non-SSL. Each server is it's own WLS
environment. The only installed file that is shared it the
weblogic_domain_registry.dat file in the root directory. As for security,
I'm doing nothing except changing one password (system user on the app
server).
I then tried to manually upgrade the app/web servers to 6.1.2.0 by updating
the WEBLOGIC_ROOT in the respective xxxxdomain.ksh files. Same problem.
I then cleanly reinstalled the app/web servers using version 6.1.2.0 and
configured as above. Same problem.
Let me know if I need to provide additional details.
Thanks,
Jed Zimmer
"Joseph Nguyen" <[email protected]> wrote in message
news:[email protected]...
>
"Jed Zimmer" <[email protected]> wrote in message
news:[email protected]...
I am experiencing this error when a servlet or JSP is preloaded on the
web
server and the init method of the preloaded item results in a call tothe
app server. If I don't preload and then manually invoke the JSP orservlet
after the web server completely loads the call to the app server does
not
produce the exception. The only security differences between the weband
app servers are the console and system passwords. I can fix the problemby
making the passwords (system and console) the same across the board, but
find it hard to believe that this is the true solutionI don't quite understand what you mean by "console" password? Are you
talking about the admin console? If so then it's confusing because youhave
to log into the console using the system user. If you can clarify morehere
it would great.
Joseph Nguyen
BEA Support
. I would prefer
sticking with the default security settings.
I've poured through hundreds of messages. I can find similar problems
but
not this exact problem.
Any ideas would truly be appreciated!
More information:...
App and Web server are both wls 6.1.1.0 running on the same SUN Solarisbox.
Both are using the basic, out of the box, security.
The App server has SSL disabled.
The exception reported in the app server's log is:
java.lang.SecurityException: Authentication for user system denied inrealm
wl_realm
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
atweblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at
weblogic.security.acl.internal.Security.authenticate(Security.java:125)
atweblogic.security.acl.internal.Security.verify(Security.java:87)
at
weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:235)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:2
2)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
The exception reported in the web server's log is:
java.lang.SecurityException: Authentication for user system denied inrealm
wl_realm
at
weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.
java:85)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:255)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:222)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy54.lookup(Unknown Source)
at
weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:323)
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at
com.qwest.tmmt.manager.client.MDMAdapter.getEJBHome(MDMAdapter.java:197)
at
com.qwest.tmmt.manager.client.MDMAdapter.<init>(MDMAdapter.java:64)
at
com.qwest.tmmt.manager.client.ManagerFactory.createMetaDataManager(ManagerFa
ctory.java:305)
at
com.qwest.insite.util.ClientMetaDataCache.<init>(ClientMetaDataCache.java:53
at
com.qwest.insite.util.ClientMetaDataCache.getInstance(ClientMetaDataCache.ja
va:106)
at
com.qwest.insite.metadata.startup.MetaDataServlet.init(MetaDataServlet.java:
30)
at
weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java
:700)
at
weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.ja
va:643)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.jav
a:588)
at
weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletC
ontext.java:2203)
at
weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServlet
Context.java:2147)
at
weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.jav
a:884)
at
weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.j
ava:807)
at
weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:421)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:160)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:144)
at
weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:
76)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy33.addWebDeployment(Unknown Source)
at
weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeploymen
t(WebServerMBean_CachingStub.java:1094)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:315)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deployment
Target.java:279)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(D
eploymentTarget.java:233)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploym
entTarget.java:193)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy32.updateDeployments(Unknown Source)
at
weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(
ServerMBean_CachingStub.java:2734)
at
weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(Appl
icationManager.java:362)
at
weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManage
r.java:154)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:608)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
92)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:352)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:449)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:190)
at $Proxy45.start(Unknown Source)
at
weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(
ApplicationManagerMBean_CachingStub.java:480)
at
weblogic.management.Admin.startApplicationManager(Admin.java:1151)
at weblogic.management.Admin.finish(Admin.java:570)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:506)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
at weblogic.Server.main(Server.java:35)
Thanks,
Jed Zimmer -
How to find conversion exit MATN1 for the field MATNR
Hi Friends !
I want to run the infopackage with selection on material. But when put some value in the infopackage selection screen, it says "cannot find conversion exit MATN1 for the field MATNR".
Ques is how to find where this conversion exit is written? Will it be written in ECC side or BI side?
Source System Datasource : 0MAT_SALES_ATTR
InfoObject in BI : 0MAT_SALES
With Regards
RekhaHI ,
It will be available in the BI system itself as FM , you can find them in TCODE : SE37 --> provide the converstion exit name
with star on both sides like MATN1 and press F4 key , every convertion exit will have two FM s , one for INPUT and
one for OUT put , you can try the Test Run ofFM to check how it works
For MATN1
CONVERSION_EXIT_MATN1_INPUT
CONVERSION_EXIT_MATN1_OUTPUT
Regards,
Sathya -
Can't access EMS or Toolbox - get "load quota for the system has been exceeded" error
I'm trying to run some commands on our CAS servers, and I'm getting the error "load quota for the system has been exceeded". I'm running two CAS servers in an Exchange 2013 Standard Environment, running on Windows 2012 Standard servers.
Both my CAS servers are getting the error. I also have two MBX servers, and I can access EMS on those just fine.
I checked another thread that had a similar issue for Exchange 2010:
https://social.technet.microsoft.com/Forums/exchange/en-US/1cc17514-44dc-41d9-b319-3232107490c0/cant-open-emc-or-ems-for-exchange-2010-from-local-machine?forum=exchange2010
However none of the fixes they described worked, and some of the fixes look like they're out of date.
Here's the full error message. It tries to connect to both CAS's, fails, and then connects to the first MBX it can.
VERBOSE: Connecting to cas2013.contoso.com.
New-PSSession : [cas2013.contoso.com] Connecting to remote server cas2013.contoso.com failed with the following error message :
The WS-Management service cannot process the request. The load quota for the system has been exceeded. Send future
requests at a slower rate or raise the system quota. For more information, see the about_Remote_Troubleshooting Help
topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : -2144108120,PSSessionOpenFailed
VERBOSE: Connecting to CAS2013.contoso.com.
New-PSSession : [cas2013.contoso.com] Connecting to remote server cas2013.contoso.com failed with the following error message :
The WS-Management service cannot process the request. The load quota for the system has been exceeded. Send future
requests at a slower rate or raise the system quota. For more information, see the about_Remote_Troubleshooting Help
topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : -2144108120,PSSessionOpenFailed
VERBOSE: Connecting to ca2-2013.contoso.com.
New-PSSession : [ca2-2013.contoso.com] Connecting to remote server ca2-2013.contoso.com failed with the following error message :
The WS-Management service cannot process the request. The load quota for the system has been exceeded. Send future
requests at a slower rate or raise the system quota. For more information, see the about_Remote_Troubleshooting Help
topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : -2144108120,PSSessionOpenFailed
VERBOSE: Connecting to MB2-2013.contoso.com.
VERBOSE: Connected to MB2-2013.contoso.com.
[PS] C:\Windows\system32>
----------- Ron E Biggs Chief Tech Officer Entertainment StudiosHi,
Is the ”
cas2013.contoso.com” the second CAS Server you added?
What’s the authentication settings on the powershell VD on the Back End Server. If the
Anonymous is enabled, please disable it and restart the IIS to check if the issue persists.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
There is already a transaction for the systems of this product version(MOPZ)
Hello All,
I am trying to configure maintenance optimizer in Solution Manager 7.0
on Windows 2003 server and SQL 2005 server.
I am configuring this for SAP CRM 2007 server.
Created the server, database and system in SMSY
Created Logical Component in TA code SMSY
SM59 connection for SAP-OSS is OK.
S-User is assigned to a User.
Created a solution using TA code solution_manager.
Defined the product version for the solution created in the TA code
solution_manager.
When creating a Maintenance Optimizer transaction, I select the
product version and its logical component in the Plan Maintenance
(Phase) and click on Continue to go to Select Files Phase, I get below
warning:
Information Procedure 8000000130 Saved
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
I cannot get pass this phase.
I have deleted and recreated the solution, carried out the same
activity again but its giving the same Warning
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
Any help will be appreciated???
Regards,
Satish.Hello Ragu,
Thanks for your response.
As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
I was successful in configuring CRM and SOLMAN.
But when I tried to configure in ECC, it failed due to RFC erros.
So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
Please let me know if you need further information.
Regards,
Satish. -
Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driverHello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments -
Unable to find a qualifications catalog for the root object specified-ESS
Hi SDN,
We are getting following exception Unable to find a qualifications catalog for the root object specified when click on Add New Skill in Skills Profile, ESS . It is working fine , if user is assigned sap_all role. This is issue with permissions. Which role need to be assigned to work with Skills Profile in r3. Please help me out.
regards,
Sree.Have a look in table T77S0 for an entry called QUALI ESSST and make sure the object ID stored there matches the appropriate node in your qualifications catalogue.
This setting is designed to be used for restricting ESS users to a particular part of the Quals Catalogue.
If the table entry was configured in your development system, it may not match the obect numbers in your production system. -
Getting this security exception when trying to pull a message from one weblogic
instance JMS queue, and sending the message (via a MDB) to another machine's JMS
queue.
Ex. Here's the scenario.
Two Windows2000Server machines,
one at ip ... xxx.xxx.x.16,
second machine at ... xxx.xxx.x.17.
MDB pulls message off of a JMS queue on 16. MDB sends the message to .17 box.
ON the .17 machine (the receiver) I get the following exception
weblogic.transaction.internal.CoordinatorImpl@31406b>
java.lang.SecurityException: Authentication for user system denied in realm wl_realm
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.security.acl.internal.Security.verify(Security.java:87)
at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:76)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
ON the sending maching .16, I get the following exception.
####<Apr 3, 2002 9:46:24 AM CST> <Error> <RJVM> <testweblogic> <OptiSoftAppServer>
<ExecuteThread: '96' for queue: 'default'> <> <> <000000> <Unsolicited error response
for: '-1'>
The messages appear to show up on the destination machine, but are these error
messages valid, or just bogus?
Thanks,
Eric.
Why is that? Your suggestion worked but I don't understand why.
When our MDB on machineA did the JNDI lookup to MachineB we set the
credentials to a valid user/password on MachineB.
My speculation: Since the MDB on machineA is already in a transaction
any other JNDI calls use the credentials for the MDB's transactions,
ignoring any other credentials we might try to set explicitly. If my
speculation is correct then that would explain by the passwords for the
user "system" would have to be the same between servers.
Is there a good place to read up on this?
Thanks
Tom
Rajesh Mirchandani wrote:
> Make sure you have the same system password for the 2 instances of WLS on seperate boxes.
>
> Tom Barnes wrote:
>
>
>>Or post to the EJB newsgroup (which "owns" MDBs).
>>
>>Tom Barnes wrote:
>>
>>
>>>I think there is a username/password field configurable in the MDB descriptor that
>>>might help here??? Other than that, I suggest posting to the security newsgroup.
>>>
>>>Tom
>>>
>>>Eric Babin wrote:
>>>
>>>
>>>>Getting this security exception when trying to pull a message from one weblogic
>>>>instance JMS queue, and sending the message (via a MDB) to another machine's JMS
>>>>queue.
>>>>
>>>>Ex. Here's the scenario.
>>>>
>>>> Two Windows2000Server machines,
>>>> one at ip ... xxx.xxx.x.16,
>>>> second machine at ... xxx.xxx.x.17.
>>>>
>>>> MDB pulls message off of a JMS queue on 16. MDB sends the message to .17 box.
>>>>
>>>>
>>>>ON the .17 machine (the receiver) I get the following exception
>>>>
>>>>weblogic.transaction.internal.CoordinatorImpl@31406b>
>>>>java.lang.SecurityException: Authentication for user system denied in realm wl_realm
>>>> at weblogic.security.acl.Realm.authenticate(Realm.java:212)
>>>> at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
>>>> at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
>>>> at weblogic.security.acl.internal.Security.verify(Security.java:87)
>>>> at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:76)
>>>> at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
>>>> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
>>>> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>>>>
>>>>ON the sending maching .16, I get the following exception.
>>>>
>>>>####<Apr 3, 2002 9:46:24 AM CST> <Error> <RJVM> <testweblogic> <OptiSoftAppServer>
>>>><ExecuteThread: '96' for queue: 'default'> <> <> <000000> <Unsolicited error response
>>>>for: '-1'>
>>>>
>>>>The messages appear to show up on the destination machine, but are these error
>>>>messages valid, or just bogus?
>>>>
>>>>Thanks,
>>>>
>>>>Eric.
>>>>
>
> --
> Rajesh Mirchandani
> Developer Relations Engineer
> BEA Support
>
>
>
-
Reason: weblogic.security.SecurityInitializationException: Authentication for user system denied
I tried my user name.But server didn't start.PLz help me and tell me what i have to do.
ThanksHi,
The admin server is also able to start the managed server. The easiest way is
to use a script. The command of starting a managed server is not much different
from the one for the admin server. Just make sure that you reference the admin
server URL (eg. http://localhost:7001). The more production environment way of
managing managed server is to use the notemanger. See the admin guide for more
infos.
Which version are you using?
Kai
"hari" <[email protected]> wrote:
>
Hi!Kai..
I tried with system/weblogic....but same error.Actually i created domain
and managed
server in existing domain throgh config.sh
But the admin server is running properly.But the manager is not starting,user
authentication problem is coming.When i was created domain..i created
a user.I
started admin server with that user...but manged server is not starting.Plz
help
me. -
I am looking for some help to deploy the application in weblogic6.0.
This is what i did during the application deployment.
Create a new directory under config as a new application.
D:\bea\wlserver6.0\config\test
under test created two other directories applications and logs.
Under the applications directory copied .ear and .war files.
Under the test i copied config.xml, all the *.pem starttest.cmd, fileRealam.properties
files. Modified the config.xml with my application, domain and the server. Modified
the settest.cmd with the new domain and server name.
when i do startup, it is prompting for the password and i entered what ever i mentioned
during the installation.
And getting the following error.
Thanks alot for any suggestions.
D:\bea\wlserver6.0\config\test>startTest.cmd
D:\bea\wlserver6.0>set PATH=.\bin;D:\bea\jdk130\bin;C:\RATIONAL\RATION~1\NUTCROO
T\bin;C:\RATIONAL\RATION~1\NUTCROOT\bin\x11;C:\RATIONAL\RATION~1\NUTCROOT\mksnt;
C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Dell\Resoluti
on Assistant\Common\bin;C:\PROGRA~1\MICROS~4\Office;C:\PROGRA~1\ULTRAE~1;C:\Rati
onal\common;C:\Rational\Rational Test;C:\jdk1.3\bin;C:\Ant\bin;
D:\bea\wlserver6.0>set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
D:\bea\wlserver6.0>D:\bea\jdk130\bin\java -hotspot -ms64m -mx64m -classpath .;.\
lib\weblogic_sp.jar;.\lib\weblogic.jar -Dweblogic.Domain=test -Dweblogic.Name=te
stServer -Dbea.home=D:\bea -Dcloudscape.system.home=./samples/eval/cloudscape/da
ta -Djava.security.policy==D:\bea\wlserver6.0/lib/weblogic.policy weblogic.Serve
r
Enter password to boot weblogic server:password
Starting WebLogic Server ....
<Feb 14, 2001 12:13:04 PM EST> <Notice> <Management> <Loading configuration file
.\config\test\config.xml ...>
<Feb 14, 2001 12:13:06 PM EST> <Info> <Logging> <Only log messages of severity "
Error" or worse will be displayed in this window. This can be changed at Admin C
onsole> test> Servers> testServer> Logging> Debugging> Stdout severity threshold
>
<Feb 14, 2001 12:13:08 PM EST> <Emergency> <Server> <Unable to initialize the se
rver: 'Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied in
realm weblogic
java.lang.SecurityException: Authentication for user system denied in realm webl
ogic
at weblogic.security.acl.Realm.authenticate(Realm.java:209)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
at weblogic.security.acl.internal.Security.authenticate(Security.java:11
3)
at weblogic.security.SecurityService.initializeSuid(SecurityService.java
:293)
at weblogic.security.SecurityService.initialize(SecurityService.java:123
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised: java.lang.SecurityException: Authentication for user system de
nied in realm weblogic
java.lang.SecurityException: Authentication for user system denied in realm webl
ogic
at weblogic.security.acl.Realm.authenticate(Realm.java:209)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
at weblogic.security.acl.internal.Security.authenticate(Security.java:11
3)
at weblogic.security.SecurityService.initializeSuid(SecurityService.java
:293)
at weblogic.security.SecurityService.initialize(SecurityService.java:123
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
D:\bea\wlserver6.0>goto finish
D:\bea\wlserver6.0>cd config\test
D:\bea\wlserver6.0\config\test>ENDLOCAL
D:\bea\wlserver6.0\config\test>Seen this, may give a clue?
Server Known Problems Change Request Number Description
042556
The weblogic.Admin command now requires the user and password options. For example:
java weblogic.Admin -username system -password gumby1234
The username "system" is required for most functions (for example: VERSION). If
you do not specify -username system, you will get the following error:
Exception in thread "main" java.lang.SecurityException: Authentication for user
system denied in realm weblogic
<<no stack trace available>>
"lazar" <[email protected]> wrote:
>
I would also like to know, if there is a fix for it.
Thanks
Lazar
Greg Layton <[email protected]> wrote:
Did you ever get an answer to this. If so could you share it with me.ThanksGreg -
We have started getting the above error message in a system that has worked happily
for the past 6 months or so (and continues to work happily from our disaster recovery
environment). I should probably add that this occurs when we are attempting to
write to the database via the connection pool.
Anyone have any ideas?
Thanks
Andrew
The full stack trace is
javax.naming.AuthenticationException. Root exception is java.lang.SecurityException:
Authentication for user system denied in realm weblogic
<<no stack trace available>>
31-Jan-02 00:04:41 GMT Warning Adapter RuntimeException
thrown by rmi server(class com.esure.ibis.a
ccesslayer.sb.useraccess.UserAccessBeanEOImpl)
[265127279722
6064825S:hfxesure17:[7005,7005,7002,7002,7005,7002,-1]:esure
prdwls/296]: [BaseEJBObject]
home: com.esure.ibis.accesslaye
r.sb.useraccess.UserAccessBeanHomeImpl@4b741e
com.esure.ibis.util.IbisException: NamingException occurred in UserAccess Session
Bean::validateUser()
at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBean.validateUser(UserAccessBean.java:192)
at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanImpl.validateUser(UserAccessBeanImpl.java:110)
at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl.validateUser(UserAccessBeanEOImpl.java:31)
at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl_WLSkel.invoke(UserAccessBeanEOImpl_WLSkel.java:202)
at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:118)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)We have started getting the above error message in a system that has worked happily
for the past 6 months or so (and continues to work happily from our disaster recovery
environment). I should probably add that this occurs when we are attempting to
write to the database via the connection pool.
Anyone have any ideas?
Thanks
Andrew
The full stack trace is
javax.naming.AuthenticationException. Root exception is java.lang.SecurityException:
Authentication for user system denied in realm weblogic
<<no stack trace available>>
31-Jan-02 00:04:41 GMT Warning Adapter RuntimeException
thrown by rmi server(class com.esure.ibis.a
ccesslayer.sb.useraccess.UserAccessBeanEOImpl)
[265127279722
6064825S:hfxesure17:[7005,7005,7002,7002,7005,7002,-1]:esure
prdwls/296]: [BaseEJBObject]
home: com.esure.ibis.accesslaye
r.sb.useraccess.UserAccessBeanHomeImpl@4b741e
com.esure.ibis.util.IbisException: NamingException occurred in UserAccess Session
Bean::validateUser()
at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBean.validateUser(UserAccessBean.java:192)
at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanImpl.validateUser(UserAccessBeanImpl.java:110)
at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl.validateUser(UserAccessBeanEOImpl.java:31)
at com.esure.ibis.accesslayer.sb.useraccess.UserAccessBeanEOImpl_WLSkel.invoke(UserAccessBeanEOImpl_WLSkel.java:202)
at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:118)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120) -
Authentication for user system denied in realm weblogic
hi,am using Web Logic 6.1 on hp and all works fine, I've a cron which kicks off
every morn.
This cron stops the web logic app server (admin server), then starts it. The stopping
is done with a shutdown.sh script. I've noticed all the posts here about "Authentication
for user system denied in realm weblogic" seem to be in code. This is diff as
it's on shutdown.
My shutdown script does the below:
#!/bin/sh
JAVA_HOME=/opt/weblogic6.1/jdk131
WL_HOME=/opt/weblogic6.1/wlserver6.1
CLASSPATH=$WL_HOME/lib/weblogic_sp.jar:$WL_HOME/lib/weblogic.jar
JAVA_RUN="${JAVA_HOME}/bin/java -classpath ${CLASSPATH}"
WLS_PW=try_abc
RUNCMD="${JAVA_RUN} weblogic.Admin -url localhost:9100 SHUTDOWN -username system
-password $WLS_PW"
echo $RUNCMD
$RUNCMD
When it's run the below is printed. Any help appreciated on this!!
/opt/weblogic6.1/jdk131/bin/java -classpath /opt/weblogic6.1/wlserver6.1/lib/weblogic_sp.jar:/opt/weblogic6.1/wlserver6.1/lib/webl
ogic.jar weblogic.Admin -url localhost:9100 SHUTDOWN -username system -password
admin2001
Authentication for user system denied in realm weblogic
Start server side stack trace:
java.lang.SecurityException: Authentication for user system denied in realm weblogic
at weblogic.security.acl.Realm.authenticate(Realm.java:195)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:119)
at weblogic.kernel.BootServicesImpl.findOrCreateClientContext(BootServicesImpl.java:203)
at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:148)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
at weblogic.socket.PosixSocketMuxer.deliverGoodNews(PosixSocketMuxer.java:456)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:385)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack traceThis is the way it should be. You should not be able to call from one server into
another using the system user without having to provide a password.
Yeshwant <[email protected]> wrote:
>
Hi Jose
What version of the server are you using . In 6.x this is a known issue
The workaround as you mention is to have the same password for the system
user.
Jose Perez wrote:
Hi all,
I'm having problems when communicating 2 EJBs in different weblogic Serverinstances,
one acts as a "client" and the other as a "server".
The exception is "Authentication for user system denied in realm weblogic".This
only happens if the user system has different password in each server.
Any idea?
Thanks in advance -
Authentication for user System denied
hi,installed weblogic6.0, and everthing seemed to go ok but upon starting the server i get java.lang.securityException authentication for user system denied in realm weblogicI am prompted to enter the system password whilst the server is loading which I enter to be the same as I supplied on the installation when providing a password for the 'System' user. Is it the password that it is objecting to, if so what realm or properties file needs editing and what entry must be supplied ? Any help, much appreciated.Also the 'realm weblogic' file is located ?rob.
Make sure you have provided the right password.
"Vidyananda Eswaran" <[email protected]> wrote in message
news:[email protected]..
Hi,
I get this "Authentication for user system denied" error when i start
the admin server in weblogic. It actually prompts for a password and after
that it just shuts down. Can anyone help me on this.
Eshwar.
Maybe you are looking for
-
Issues installing LMS 3.2 on Windows 2008 R2
I am trying to install LMS 3.2 on W2008 R2 and am getting a platform error saying the operating system is not supported. Has anyone run into this before? Any help would be appreciated. I have attached a screenshot.
-
Hi, I need to find the below field from R/3,but no idea how each means in SAP Field. I am not sure if we find this data in VBAK and VBAP .Could you please advise. Thanks for your help Field Name Name of element tax_auth_poo Tax Authori
-
We are having a requirement (in FDM ) to copy forecast data from one over version to another version. 1) Does FDM has built-in functionality to do data copy? 2) If not, Did anyone do custom scripting to do data copy? Please share if you have done thi
-
GS has some serious bug ( http://bugs.ghostscript.com/show_bug.cgi?id=691733 ) and I have v8 which doesn't. If I upgrade it, I won't be able to print. GS has a lot of dependencies. I thought that if I add GS to pacman.conf to "IgnorePkg", it won't be
-
hi all. i am so new here it is silly, there is soooo much info i started with some searches but cannot find anything here nor on the many tutorials online to solve my issue so here goes. worth mentioning is that i only dabble in flash so i am not ver