SAP R/3 Mapping

Hi,
I need to find the below field from R/3,but no idea how each means in SAP Field. I am not sure if we find this data in VBAK and VBAP .Could you please advise. Thanks for your help
Field Name     Name of element
tax_auth_poo       Tax Authority (based on above address)     Point of order origin
poo_street       Street Name/House No
poo_city            City
poo_statec         Province / State Code
poo_zipcode          Postal Code
poo_country          Country Code
tax_auth_shipto     Tax Authority (based on above address)
ship_to_street             Street Name/House No
ship_to_city             City
ship_to_statec              Province / State Code
ship_to_zipcode     Postal Code     KNA1-PSTLZ
ship_to_country     Country Code     KNA1-LAND1
tax_auth_sfrom     Tax Authority (based on above address)
ship_frm_street     Street Name/House No
ship_frm_city             City
ship_frm_statec     Province / State Code
ship_frm_zipcode     Postal Code
ship_frm_country     Country Code
Regards,
Amy

Are you trying to have a report to check partner address?
Find address number field in VBPA and check in ADRC table.

Similar Messages

SAP:Code area="MAPPING" EXCEPTION_DURING_EXECUTE /SAP:Code

Hi Experts.
I'm tryin to make a JDBC Synchronous escenario, i want to UPDATE data from table in DB2 AS400, and the JDBC Update instruction returns the total of the register updated.
All the configuration It's ready, but when I send the Update instruction, the UPDATE the information in the AS400 DB2 table, but the return message send me the next error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_DAT_RES_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:MT_DAT_RES_0</SAP:P3>
<SAP:P4>2. Values missing in queue context. Target XSD re~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_DAT_RES_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_DAT_RES_02. Values missing in queue context. Target XSD re~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anyone telll me about it?
Thanks.
Kenneth

Hi Rao,
Go to sxmb_moni and open your response mapping and take the payload and test your mapping. It seems the value you are mapping to /ns0:MT_DAT_RES_02 is not there. Can you please check that. You need to make sure step 4 in this blog:
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
Your response always comes up with _response and your message type should be like that only. Also can you give your response mapping payload and the response message type here so that somebody can help you out if this didn't resolve your issue.
Regards,
---Satish

Error in SXMB_MONI: SAP:Code area="MAPPING" EXCEPTION_DURING_EXECUTE /SAP:C

Hi All
When the Idoc is sent from ECC to XI after checking the message in the SXMB_MONI I get an error saying:
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
What is this error and how should I go about resolving it?

Hi,
The most probable reason is that your idoc has failed in the mapping step.
Take the xml payload of your message from SXMB_MONI and paste it the test tab of your Message Mapping.
Then you can run the mapping in the test tab of the message mapping, which will point you to the exact reason for the mapping failure.
Regards,
Ravi Kanth Talagana

SAP business process maps for mySAP ECC6.0?

Any idea how we can get the SAP business process maps for mySAP ECC6.0? Is this imbedded in Solution Manager?
Thanks,
Phani

Hello Phani,
I suppose you are looking for the solution maps for mySAP ERP (which contains SAP ECC as a component). These maps are not contained in the SAP Solution Manager, but they are delivered with the SAP Solution Composer, an offline PC tool which allows you to browse and pre-scope your own solution (evaluating your solution). The tool itself including the latest solution map content is always available for download at the SAP Service Marketplace:
<a href="http://service.sap.com/s-composer">http://service.sap.com/s-composer</a>
You can also view the mySAP ERP - as part of the cross-industry maps - right here:
<a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000338980&">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000338980&</a>
The SAP Solution Manager would then come into play for configuring the respective processes (implementing you solution).
Best regards,
Doreen Baseler

Source code has syntax error in SAP PI7.1 Mapping Test

HI All,
IN SAP P7.1 created simple two data types, message types and Message Mapping with only 2 fields. While testing the mapping in Message Mapping it is giving the error as
Source text of object Message Mapping: MM_Source_to_Target | http://abc.com has syntax errors:
Source code has syntax error:
I am able to activate the Datatypes and Message Types but not able to activate the Messge mapping.
Please if any body faced the same problem please give the solution.
One more thing is I am able to test the Message Mapping available in BASIS 7.1 Software Component objects. It is executing successfully...
but otherthan this SWC it not working success fully.....
Regards
Sridhar Goli

Hi David,
please check the default trace. It may contain the entry:
Error in compiling : java.io.IOException: Not enough space
If that's the case, maybe there's too little space for the swap file/device.
You should ensure that at least 2X (preferably 3X) of Heap (-Xmx) is configured as real swap
Hope that helps.
Regards,
Gábor Klauzer

SAP R/3 Mapping with EDI IDOC's 846 and 852 (Outbound)

Hi:
How are the following EDI IDOC Types mapped in SAP - R/3?
1. Inventory Inquiry / Advice (846)
2. Product Activity Data (852)
What is the basic type, message type, idoc type that has to be used
in both the cases - outbound based ones.
This is a consumer products industry and not a retail industry. This
is a hypothetical scenario where the end customer would like to see
the price and the stock from all the plants and then place an order
(846); and also see what is being planned in aparticaular plant for
a planning period (852). The cycle countings are carried out based
on the type of product in question and SAP-R/3 has been set up for
this. What is the trigger point for the enitre activitiy to take
place. Any valuable suggestions or guidelines are most welcome.
Regards
Rohit

Check this link and see if it leads you somewhere.
http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/information-on-the-edi-idoc-types-1739410
http://www.jt77.com/CRM/related-discussion-1111.html
Regards,
Ravi Kanth Talagana

SAP data extraction mapping, where the JCO files need to be copied?

Hi All,
I have the following environment.
OWB client: Windows7
OWB server: Linux x86_64
SAP Server: Windows Server 2003
I need to create OWB mapping to extract data from SAP to Oracle target.
Please let me know what are the JCO files required and where do i need to copy them?
Do i need to copy them on both the owb client and server or is it enough to copy them on the client machine alone?
Thanks and Regards,
Pnreddy.

OWB client isn't supported on Windows 64-bit, just wanted to let you know since you mentioned Windows 7..
For the windows you will require 3 files sapjcorfc.dll, librfc32.dll and sapjco.jar. You can get them from the SAP install cd or download them from http://service.sap.com/connectors for your SAP version. You will need to have a SAPnet account to do that.
You can place the files sapjcorfc.dll and sapjco.jar in OWB_HOME\owb\lib\int, and librfc32.dll in OWB_HOME\owb\bin and also set the PATH to reference this directories.
For linux you will need librfcccm.so, libsapjcorfc.so and sapjco.jar. Also set the LD_LIBRARY_PATH to reference these files locations.
If you are only extracting metadata from SAP then you need it only on the OWB client but if you plan to execute ABAP programs on the SAP system you will need to set it up on the server side.

SAP defined process maps on SCM

I need SAP business and process maps on following areas for discrete and process industry.
1. Order Management process ( Procurement)
2. Warehouse management
3. Transportaion management
4. Demand planning
5. Inventory planning.
Please inform me the location ( website , sap address etc. ).
Thnaks.
Sumit

Sumit
Typically there is no single process flow defined for any given business scenario within SAP, normally there are a number of alternatives based on industry best practice.
When you have carried out the business blueprint phase and captured these requirements within Sap solution manager you are then able to generate process flows that describe the business scenario.
These are not currently able to generate BPEL or UML models, to do this you would need to use something like ARIS for SAP Netweaver.
Unless the context of the business requirements are understood and without access to SAP Solution manager you might be limited as to the "process flow" view you seem to be after.
Therefore please have a look at the business scenario maps, I would also recommend downloading the solution composer, this should be capable of generating the business scenarios for you.
http://www50.sap.com/businessmaps/91039F49E53F11D3874B0000E820132C.htm
While this may not be exactly what you are after, you could also search the best practice packages components on http://help.sap.com

SAP - BC inboind mapping not working

I have a remote enabled function module in SAP which passes 2 tables to BC and expects one table back. I have created a package on BC which I want to call from my FM, so I've created a mapping in BC admin.
Everything looks fine so far.
I test from BC developer running the flow created automatically by the mapping and it works fine. If I test it from BC admin, I get no data in the response table which should be passed back to SAP but no error. If I run the FM from SAP I get a short dump "Unknown Partner and Message Type. Sender: DEV920 Receiver: SAPBC MsgType:" which isn't very useful.
I've tried increasing the audit level on the automatically generated flow in BC to verbose but this doesn't seem to make any difference so I don't even know if it's being called correctly from either BC admin or SAP.
I've checked the RFC destination in SAP and it's fine, the listener in BC is fine too. I have other packages which are called in the same manner from SAP and their settings look the same as mine so I can't figure out what I'm doing wrong. Is there anything else I can check? Any suggestions welcome.

HI!
Check the port in we21.
jawad

SAP ERP solution map

hi experts
i need information how to use SAP ERP solution map

Please go through the following thread.
Urgent Solution Map for EAM
As such this site helps you to findout which SAP component fits in to your business requirement
Shakti

SAP user in mapping

Hi everyone!
Is it possible to use the sy-uname for the logged on user (XI system) in the mapping? I know I can retrieve it with an ABAP mapping before the XI mapping, but I would like to know if it can be found in a system field or anything...
regards Marianne

Hi Mariane
You can get the user of the HTTPS request
This is possible when you have sap-user in the URL of HTTP.
Set the parameter
Apply URL parameter
Parameter1 - sap-user
Then in mapping just write a UDF
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyURL1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/HTTP", "UrlParamOne");
String ourUser = conf.get(keyURL1);
return ourUser;
You can pass this user to target message. I think this you was looking for.
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 30, 2008 12:45 AM

SAP Capabilities/Functions Mapping

The Enterprise Architecture team I work with is looking for materials that would show the capabilities/functions that SAP provides.
We would like to use this to map our legacy systems capabilities to their potential SAP replacements, for planning purposes.
Anyone aware of any documents that would help us?
How have others handled this?
Thanks.

Hi Mark,
You probably need to get more information on the kind of eleminations/replacements of systems looking for.
As you know, SAP provides wide range of solutions which can be found in the below link. Some solutions are as stated below.. (http://help.sap.com/)
SAP ERP : Provides more of ERP solutions based on specific Industries.
SAP NetWeaver : Technology to iintegrate to formulate business solutions within and outside SAP ERP
SAP Business User: Small business
SAP Business Suite
SAP R/3 and R/3 Enterprise
SAP for Industries: SAP for specific Industries like Pharma, Retail, Oil and others.
Composite Applications
SAP Solution Manager : Management of solutions within SAP.
Do let me know if you need any further information.
Thanks and regards,
madhu

Sap SD Scenario Mapping

Hi Gurus,
My Client us in JD edwards and moving to SAP.We have this scenario.We maintain some warehouses near the ports . After we get an order, we check the inventory in the warehouse . If inventory is available, We basically ask carriers to give freight rates to move the inventory . Inventory is ireleased from the warehouse and the ocean carrier delivers the freight to the final destination.
Could you please help me in this

Hi check this out
<a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LESHP/LESHP.pdf">Logistics Execution - SHIPPING</a>

SAP MDG - SMT Mapping

Dear Guru's,
Have a question specific to MDG -M
I create a new Z field (ZZDISLS) in one of the Z entity type (ex ZMARC) and activated the Entity type & data model.
Later maintained it in the Customer Includes & activated the Structures and generated the structures.
Now when I try to create & Edit Mappings & try to do the mapping of Source & Target structures. I only see the Z field in the source structure but not in the target structure.
am I bypassing some thing here?? Please help me to fix this issue.
Thanks in advance.
MSR

Hi,
there are 2 ways for Z-fields in the model.
ZZDISLS in Model --> DISLS in MARC
Here you have to map ZZDISLS to the standard field DISLS in MARC. You can find the field DISLS in the target structure.
ZZDISLS in Model --> ZZDISLS in MARC
Here you have to extend the MARC. Ensure that the note 44410 (especially the part about the T130F) is executed. Then you can find the custom field ZZDISLS in the target structure.
Regards Elke

RuntimeException in Message-Mapping (com.sap.aii.utilxi.misc.api.BaseRunti)

HI,
We are facing a very strange problem , during runtime we are facing the below mapping problem ,
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_FILE_TO_IDOC_P~</S P:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
But when we have downloaded the XML from SXMB_MONI and tested the mapping it works fine , only in the run time we are facing this problem , funny part is the same scenario worked fine yester day itself (end-to-end).
<b>Note</b>: <b>Chche is uptodate.
Mapped all mandatory fields</b>
Regards,
Vijaya

Hi
please chech whether the data in the input file is according to the format or not.
for this you go to sxmb_moni,take the input payload from the moni and test with that payload and you will come to lnow where is the error.
if you still have the problem please relly me back
Thanks
Rinku

SAP R/3 Mapping

Similar Messages

Maybe you are looking for