Cannot find database login fail.

I had to database one on my local machine (LM) and one on the network machine (NM).
NM had a website where users and had to login to access the data using SQL authentication.
LM uses windows authentication. I updated LM made a backup.
detach NM and delete it. I copied the backup to NW and then Attach it.
now when users login they are seeing the message can't find database.
Even if I know for a fact the database is there with the same name.
Not sure what to do.

If i am guessing correctly then, This is a very common issue :-)
you think that the because you use attached a database with the same user name then this is the same user :-) It is not. two users with the same name and the same password in two instances are not the same user. you should search Google for: sql
server orphaned users. those users that came from the other server named "orphaned users". they seem to be in the login list but there is no real user with the same ID configure in the server (there might be a different use with the same name and
password which is not the same user since the ID is not the same)
Fix the orphaned users as a start step :-)
http://msdn.microsoft.com/en-us/library/ms175475.aspx
[Personal Site] [Blog] [Facebook]

Similar Messages

Cannot verify database login information

We are installing BO BI platform 4.0 SP2 in AIX 6.1
we are using Database Oracle 11.2.0.2
Oracle SID : JBD
During the installation- Configure CMS repository Database - Oracle step,
We have input the correct DB TNSNAMES, user and password
we have error:
"You cannot proceed because the following has failed validation:
Cannot verify database login information. [INS00104]"
We have read Notes 1638205 but it seems not much helps.
we can connect to database using specified user and password.
Any idea?
Thanks,
DJ

Hi,
can you please answer the following Questions:
1. Which Oracle Middleware is installed?
2. Is the Oracle Middleware installed with the same user you want to install BI4?
3. Can you tnsping the Oracle DB from the BI4 Host?
4. Can you connect via sql plus to the Oracle DB from your BI4 Host?
5. Can you ping the Oracle DB Host from your BI4 Host?
Regards
-Seb.

Crystal reports "Database login failed" when using push method

I have a web application (ASP.NET, .NET v3.5), that pushes data to a CR 2008 report. On two servers one of the three reports returns a "Database login failed" error. I am stumped since there is no login, it's push not pull; in addition the problem is hard to debug since it works fine from my developers workstation. I have "updated" the xsd in that report, reinstalled the app, etc., non of which helped. If anyone has a solution or even ideas I'd appreciate the help.

What about following the troubleshooting steps as described in the blog;
Create an XML file off of your dataset. Make sure this is done just before you set the dataset to the report:
rpt.Load(rptPath)
myDataset.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
rpt.SetDataSource(myDataset)
Copy the above created XML to your development system
Open the problem report in the Crystal Reports designer
In the Desigger, go to the Database menu and select u201CSet Datasource Locationu201D
In the u201CReplace with:u201D pane, expand the u201CCreate New Connectionu201D folder.
Double click the u201CADO .NET (XML)u201D icon
Browse to the location of the XML file you created in step (1)
Click on the path to the XML. The <Update> button should enable
Click on the <Update> button
Typically, either of the following will happen:
You will get a u201CMap Fieldsu201D dialog. This indicates that the XML written off of your dataset does not match what the report is expecting. This may be due to incorrect fields name, incorrect field type, etc. You will now need eliminate the difference.
Incorrect data or no data. There is an issue with your dataset and you need to determine why the data is not present in your dataset. Looking at the XML may be a good place to start.
Ludek

CR XI R2 "Database Login Failed" Recycled application pool and now it works

Hello,
I have a web application using CR XI R2 that has several reports which are pushed a dataset. These reports have been runing fine until today when I received an error stating "Database login failed." "Object reference not set to an instance of an object" in the report viewer control.
I recycled the application pool and the reports started working again.
My questions are:
What could be the cause of this and how can it be avoided?
Why does recycling the application pool correct the problem?
Regards.

Hi Tom,
Recycling keeps problematic applications running smoothly, especially when it is not feasible to modify the application code. Recycling helps ensure that problematic applications do not cause other applications to fail, and that system resources can be recovered from unhealthy applications.
Recycling an application pool causes the WWW service to shut down all running worker processes that are serving the application pool, and then start new worker processes. Whether the WWW service starts the new worker processes before it stops the existing one depends on the DisallowOverlappingRotation property in the metabase. Recycling an application pool does not alter any state in HTTP.sys or change any configuration in the metabase.
Note:
When an application pool is serviced by more than one worker process, the recycle operation is staggered in some scenarios. Only when a worker process is recycled on demand or when all of the worker processes hit their memory limits at the same time would they be restarted simultaneously.
For more info regarding this have a look to this [article|http://blogs.msdn.com/david.wang/archive/2006/01/26/Thoughts-on-Application-Pool-Recycling-and-Application-Availability.aspx]
Regards,
Shweta

"Cannot verify database login information. [INS00104]"

Hello,
I installing BObj 4. In step (Configure CMS Repository Database - Oracle) error occurred - "Cannot verify database login information. [INS00104]".
OS: Red Hat Enterprise Linux Server release 5.7 (Tikanga)
DB: Oracle 10.2.0.2
Distr: SBOP BI PLATFORM 4.0 SP02 SERVER LINUX (64B) Number 51041018
log setupengine.log:
11:24:45.556 [run_external_executable] cmdLine: cd "/opt/distr/BI/51041018/DATA_UNITS/BusinessObjectsServer_linux/dunit/platform.services.cms.cpp.dbcheck-4.0-core-64//"; /opt/distr/BI/51041018/DATA_UNITS/BusinessObjectsServer_linux/dunit/platform.services.cms.cpp.dbcheck-4.0-core-64//dbcheck -DBDriver [UsingCMSDBType]databasesubsystem -ConnectionString "DSN=[ExistingCMSDBServer];UID=[ExistingCMSDBUser];PWD=[ExistingCMSDBPassword]" -ClusterKey ******** -DBCheckLogFile "[$logs.folder]dbcheck_log.txt" -loggingPath "[$logs.folder]" -ResetDB [ExistingCMSDBReset] -PrintErrors -defaultlocale [setup.core.prime-4.0-core$setupuilanguage]
11:24:45.557 [run_external_executable] Exit code: 35584
11:24:45.557 [run_external_executable] Produced output:
11:24:45.557 Error: Redirected from stderr
11:24:45.557 Error: sh: line 1: 8874 Segmentation fault /opt/distr/BI/51041018/DATA_UNITS/BusinessObjectsServer_linux/dunit/platform.services.cms.cpp.dbcheck-4.0-core-64//dbcheck -DBDriver oracledatabasesubsystem -ConnectionString "DSN=ESBODEV;UID=ESBOBJDEV;PWD=ESBOBJDEV" -ClusterKey "bobj123" -DBCheckLogFile "/tmp/2012.01.12.11.22.11/dbcheck_log.txt" -loggingPath "/tmp/2012.01.12.11.22.11/" -ResetDB 1 -PrintErrors -defaultlocale en
11:24:45.557 Error:
11:24:45.557 Restored original environment to : BO_TRACE_LOGDIR=
Please, help me.
Best regards,
Sergey.

Hi Sergey,
It seems to be a known issue when special characters are used in the password of your user in Oracle.
https://service.sap.com/sap/support/notes/1638205
Try changing the password so it does not contain any special characters.
Regards,
Julian

Database Login failed for SIDADM

Hi,
I've installed a Solman system & the system starts just fine (even post OS reboots), however the problem is that sidadm is unable to connect to the database.
Administrator is able to connect just fine.
r3trans also ends with the same login failed error:
Login failed for user 'hostname\soladm'. [CLIENT: <local machine>]
Error: 18456, Severity: 14, State: 11.
I can't seem to find anything concrete on this.
Pls. help.
Thanks,
Saba.

Wowie:)
Disable UAC did the trick !!!
Thanks Markus n Sunil )

Lightroom 5 for Mac. Joined CC to install filters but cannot find them or failed to appear.

I have just installed Lightroom 5 to enhance my photographic work and decided to check Adobe for any free presets. Having registered with Cloud to enable download I cannot find either a Zip or link to add it to my application.
Adobes guide to install it reveals nothing installed! :
Where to find it
Make sure you have Adobe's Creative Cloud desktop App (free) installed, log in and sync before clicking the download button. If you experience problems acquiring the product please reboot your computer then re-check your Downloads folder. You can contact me at [email protected] After installation, the ZIP file (PortraitMatteBWStrongbyalwiDesignLR4LR5.zip) containing the LR preset will be available from your computer's Downloads folder. 1. Open Lightroom and click Lightroom then Preferences on a Mac. On a PC, open Lightroom and click on Edit at the top.
2. Go to Preferences and click it   
3. The window that pulls up will show 6 different tabs. Click on Presets and open the box called Show Lightroom Presets Folder... 
 4. A new window pulls up. Double click on Lightroom then double click on Develop Preset(s)
5. Copy the content of the unzipped files you just downloaded into the folder Develop Presets. That’s it. Restart Lightroom and the Presets are available

So a few things:
The "lrcat" folder I specified is really whatever folder you named it when you first set the catalog file location. Whatever you named it, make sure "Wheel" also has read-write permissions, and "Apply to enclosed items".
Check, double check, and triple check that the .plist files in /Library/Preferences continue to exist. Every time this failed on me, I found them to be missing from the global preferences folder. I'm not sure if I was copying them with insufficient permissions, or Gatekeeper blocked it, or something in the OS cleaned them up, but once I was SURE they were sticking around even through a reboot; it seemed to good to go.
Don't "replace" copy the /Library/Application Support/Adobe/Lightroom folder, just delete it first so there's no folder merging going on - then move the one from the User's Library over.
This should always be the last step: Run LR once more when you're satisfied and make sure the key wasn't lost in the shuffle. Just re-enter the key if needed, no need to copy all the files again.
Any other insights, updates, or failures are welcome. Hopefully the next version fixes this as it sounds like is being promised.
Follow Up: Success! I was able to capture a composer package that does suppress all the start screens for all users, including new ones after the installation.

Cannot find database job

Every day I see new data in tables. A specific procedure is running every morning at 5 pm. I cannot find a database job in user_jobs and there is no job in dba_jobs. Yesterday I put a text coding to this procedure. Today I see the in a test-table. But the procedure is running automatically. I do not know what happens. Does anybody have an idea?

Yesterday I noticed that my car wouldn't start can anyone tell me why?
No operating system.
No version number.
Apparently no attempt to ask the DBA managing the system.
No information about where the procedure was put or what it did or why it was written or how you think it was supposed to be run.
This week we are already out of guesses. Please provide all relevant information. The above list is just the first couple of items I wrote down. It is not complete.

Cannot find SECURE LOGIN SERVER software

Hi.
I am trying to setup SAP NW Single Sign On. I have been trying to download Secure Login Server but cannot find it in SAP software download page. I searched for SINGLE SIGN ON, SSO, SECURE LOGIN SERVER, SLSERVER, etc...The SAP download page returned 0 match. Can anyone direct me to the right download link please?
Thank you for your help.
Tuan

Hi Kristen,
Thank you for your prompt reply. I did follow your instruction but Single Sign-On is nowhere to be found in that page. I read the SSO implementation and follow download instruction there as well but again, cannot find it.

Win7 install looking for CD ROM driver (after loading from CD) cannot find it so fails to install.

Product: HP-IQ-775
OS? Gone!- Was WIndows Vista HP-SP2, but System Recovery wiped it out!
Error Msg: Current message that is stopping the installation of Windows 7 is "Missing CD/DVD ROM Driver- Please insert disk, or browse to location of driver" Browse accnot find driver needed (whatever it is... it is running form the bootable CD drive, so obviously it found something!)
Changes? Oh yeah, you bet!! I have had so many problems with this machine, I cannot list them all. After running the Windows 7 Upgrade Advisor, which reported only 2 issues, both software and both resolved, all OS upgrades installed, all drivers updated, ran the MS Malicious Software app, then attempoted an upgrade from Windows Vista- Home Premium, Service Pack 2. Long story short, after 3 days of 'installing Windows 7' on the screen, it failed. No explanation just "update failed, system will rollback to Vista". The rollback was uneventful, but sytem began having problems. Missing drivers, USB ports failed, CPU Fan Failure shut downs, blue screen after blue screen. I sent my system logs to an MCSE 'expert' and he reported " there are so many issues in the logs, that it would be a miracle if the machine ever ran again" He suggested Formatting the drive and instaling Win 7 clean. WIth far too much going on with projects, I could not do this. Ultimately, Updates would not work, A/V software would not update, Vdeo software would not run. I contacted Microsoft, and after a week or so of email volleys, they escalated it to thieir 'expert', who after a few hours troubleshooting remotely, and multiple failed System Restores, said the only hope was a System Recovery.
After backing up everything today, I did the System Recovery from the Factory Image, the result was fatal! It went through the first half, erasing my operating sytem and associated files, drivers etc, it reported "Error found in Sytem Configuration, System Recvovery not completed", leaving me with an X drive, a C: drive tith nothing on it, and between the two, sho about 30GB of space total, on a 500GB drive!
I figured this would be the best time to do a 'clean install' of Windows 7, as I no longer had an OS to upgrade! I ran my Win7 Install disk, which ran fine, loaded its files, then reported "missing CD/DVD driver. PLease insert floppy, CD or flash drive, or browse to external drive with driver location"
Needless to say, I could find noting that it would accept. I even downloaded a driver from TSST (CD OEM) but the installer would not accept it from the flash drive. That is where I am now. No OS loaded, partitions screwed up, command prompt finds noting but X: (Recovery files?)29GB, and C: what is left of it, it shows 9GB. Where is the rest of my disk? Who knows.
I have 5 external drives, full system backup on one, all data files on another, System Recovery Backup on another, but cannot access anything with no OS. I can only use the Win7 install boot disk to access the computer at all, and it has limited functionality.
I am writing from my HP-dv-9720 notebook, which has its own OS issues (still running on Vista basic as it will not install SPs), so it is available for email and driver downloads if necessary.
Anyone want this challenge?
Thanks
Doug

WOW! 9 months later and not a sigle response. And now I am back! (Windows7 worked fine BTW!) Now I have the FAN FAILURE, yet the only thing that works on the computer, IS the FAN!! HP is ware of this problem but has done nothing except post a bunch of unrelatre (to IQ-775) stuff! A replacement fan (not that it is needed) is over $300, almost half of what I paid for the entire system!! BS! This is a latent defect and should be fixed by HP!
I currently have 3 HP computers, 5HP printers and an HP plotter! I have been a loyal HP customer fore over 20 years! IF they do not fix this, FREE, I will NEVER buy another HP product again! That is a promise! This is pure BS! The machine will not boot due to a false "fan failure' report. both fans are running fine, and always have. The defect is in the reporting software or fan firmware, NOT the fan!
I will be back in 9 months to answer myself again!
DN

CRVS2010 Beta - Database login fails after setting select formula

I am working through how to call the report and have it print programatically. I was able to get it to print with the saved data, but as soon as i add a recordSelectionFormula to it, it fails saying the login is incorrect. I have searched the forums and tried the different resolutions some people have used, but it still fails for me. What about the select formula would cause this issue? below is the code i am using. Please let me know what I am missing, thank you.
            ReportDocument crDoc = new ReportDocument();
            crDoc.Load("c:
shipmgmt
reports
PackingSlip.rpt");
            crDoc.SetDatabaseLogon("user", "password", "localhost", "shipmgmt");
            crDoc.RecordSelectionFormula = "{ld_mstr.ldm_nbr} = \"13994\" AND {ld_mstr.ldm_ord} = \"665527\"";
            Object sfVal = new Object();
            sfVal = "R&S COLUMBIA";
            Object prncases = new Object();
            prncases = false;
            crDoc.SetParameterValue("shipFrom", sfVal);
            crDoc.SetParameterValue("prnCases", prncases);
            crDoc.PrintOptions.PrinterName = "
wc-printserver
wccsr";
            crDoc.PrintToPrinter( 1, false, 0, 0 );
            crDoc.Dispose();

Hello,
Copy the record selection formula from the Designer and paste that into your code, then use a report without the record selection formula saved in it and test again.
Next step is what database and driver are you using? Joinbuilder registry keys were for old legacy drivers. This may be an issue with the driver configuration.
ALSO, don't use "localhost" as your Server name or DSN name etc. Try replacing it with the actual DB server/machine name:
crDoc.SetDatabaseLogon("user", "password", "localhost", "shipmgmt");
Thanks again
Don

Database login failed after upgrade to VS 2008

I am having trouble with one of my reports after upgrading a project from VS 2005 to VS 2008. All reports work fine except for one. The one that doesn't work has a subreport and I am assuming that the subreport is the cause of the problem.
My configuration is - using Crystal Reports Professional XI (11.5.8.826)
The web server has Crystal reports server install, but I know very little about it. When I installed it, I had so much trouble configuring it, I don't know what it is that I finally got to work on the server. I think I ended up installing one of the runtimes a while back to get it working.
When I upgraded my project, I simply opened the project in VS 2008, set the target as .net 3.5, built it and everything works except for this one report.
Can someone please tell me what I need to install, or change on the server to make this work properly?
Is there a way that I can determine how my reports are being served up? As I said, I'm not very familiar with the CR server and I had a lot of trouble with it when I did the initial configuration.
Thanks

Thanks for the reply. I got the upgrade complete, but I am still getting the database logon error. I am using Visual Studio 2008, C#, Crystal Reports 2008 (dll version 12.0.2), Sql Server 2000. All of my reports work fine except for this one. The difference in this one is that it has a subreport. The report and subreport are using stored procedures. I have tried using the sa account to login to them. They login to two different databases on the same database server.
Here is the code that I am using to login to the database.
public enum ReportDatabase{MGA, Brokers, Intranet, TimeClock };
        public void SetDBLogonForTables(Tables tables, ReportDatabase database)
            string _userid = string.Empty;
            string _password = string.Empty;
            switch (database)
                case ReportDatabase.MGA:
                    _userid = "abc";
                    _password = "123";
                    break;
                case ReportDatabase.Brokers:
                    _userid = "abc";
                    _password = "123";
                    break;
                case ReportDatabase.Intranet:
                    _userid = "abc";
                    _password = "123";
                    break;
                case ReportDatabase.TimeClock:
                    _userid = "abc";
                    _password = "123";
                    break;
            ConnectionInfo _connection = new ConnectionInfo();
            _connection.ServerName = "123.123.123.212";
            _connection.DatabaseName = database.ToString();
            _connection.UserID = _userid;
            _connection.Password = _password;
            foreach (Table table in tables)
                TableLogOnInfo _logoninfo = table.LogOnInfo;
                _logoninfo.ConnectionInfo = _connection;
                table.ApplyLogOnInfo(_logoninfo);

Pacman cannot find database on repos

Ok, I have no clue what I have done...When I run pacman -Syu here is what I get:
[root@Kolob ~]# pacman -Syu
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from archlinux.unixheads.org : Not Found
error: failed to update core (Not Found)
error: failed retrieving file 'extra.db.tar.gz' from archlinux.unixheads.org : Not Found
error: failed to update extra (Not Found)
error: failed retrieving file 'community.db.tar.gz' from archlinux.unixheads.org : Not Found
error: failed to update community (Not Found)
error: failed to synchronize any databases
I don't really know what to do at this point. Here is my pacman config:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
And my /etc/pacman.d/mirrorlist:
# Arch Linux repository mirrorlist
# Generated on 2009-06-16
# United States
#Server = http://mirror.archlinux.com.ve/$repo/os/@carch@
Server = http://archlinux.unixheads.org/$repo/os/@carch@
#Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/@carch@
#Server = http://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/@carch@
#Server = ftp://mirrors.easynews.com/linux/archlinux/$repo/os/@carch@
#Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/@carch@
Perhaps some other useful info:
-i686
-GNOME
-pacman 3.3.2

It seems as if you have only one mirror enabled in your mirrorlist file. Can you try to enable more mirrors. pacman will try them in the order they appear in the file. Also, I have made good experience with ftp mirrors.
What you also could do is try the rankmirrors script. It will sort your mirrors according to speed. See Beginners Guide.

Cannot find database AIR says was created successfully

Hi,
I'm new to AIR development so maybe I'm not understanding
this correctly.
Following the example at
http://help.adobe.com/en_US/AIR/1.1/devappshtml/WS5b3ccc516d4fbf351e63e3d118666ade46-7d49. html
Does the "DBSample.db" only exist while the application is
running?
I can't find the database anywhere on my system even though I
get the trace message "the database was created successfully"?
I'm using Eclipse Ganymede, FlexSDK3, AIR 1.0 on a Mac OSX
10.5.4
Thank you

Change the creation success message to:
air.trace("the database was created successfully at: " +
air.File.applicationStorageDirectory.nativePath);
to see where the file is. I'm guessing that you just don't
realize how deeply buried the application storage directory
is.

Firefox V4 opens Windows error message "Cannot find...."

I updated Firefox to version 4. Now, every time I open Firefox a Windows Error popup appears stating...
Windows cannot find
'https://login.yahoo.com/config/login_verify2?.intl=us&rand=832809823&i=IWZkZHNKIXRzZnNydEpidXV4dSF0ZEqOZHh4fH5iU356YmNYcnM%3d&.src=ym'
In spite of the error message, Firefox proceeds to open normally and takes me to Yahoo.com. Closing the error message has no affect pro or con...so, the message is merely a nuisance. I've tried everything I can think of to permanently remove it with no success. Running a deep scan to find out if it is a virus didn't find anything. Am using XP Home edition. By the way, I get a similar Windows error message when I try to open GMAIL, and Firefox then opens my GMAIL account. Weird.
Am hoping someone can tell me how to prevent these messages from appearing. Thanks in advance!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

Cannot find database login fail.

Similar Messages

Maybe you are looking for