Cannot find font in numbers for ios

I created a spreadsheet in numbers on my mac and just entered one number in one cell with the font helvetica.
I then opened the spreadsheet on my ipad with no problems. I then closed the spreadsheet on my ipad and reopened it on my mac.
I then went to a neighboring cell and entered another number in the font calibri and saved the spreadsheet to the cloud.
When I opened the spreadsheet on my ipad I get the "Some changes were made to your spreadsheet" message saying the font calibri is missing.
Of ourse I can open the spreadsheet by clicking on open and the calibri text is converted to helvetica(calibri).
I closed the spreadsheet on the ipad and reopened it on the mac and changed the calibri text to helvetica.
No matter what I do, including deleting the column that the calibri cell was in, I cannot get rid of the spreadsheet details and error message. What can I do to be able to open a spreadsheet without getting the missing font message?
Also, I have a spreadsheet with 10 tabs on it that does the same thing. Is there any way to find out which cells have calibri in them.

Hi feaco,
I have a similar issue with a spreadsheet that is mostly used on iOS 7, no iCloud. Since there are other missing fonts I ignore the issue. Sure would like to turn that warning off.
I think this is an iWork for iOS issue. You may have better luck on that forum.
quinn

Similar Messages

Cannot find lib when packaging for iOS

You can see the same question on StackOverflow here:
http://stackoverflow.com/questions/11547515/cannot-find-lib-when-packaging-for-ios
Hi,
I am developping an Air Native Extension (ANE) in order to be able to use the burstly(1) ads on mobile devices.
As for my setup, I am using the FlashDevelop 4.0.4(2) and Adobe Air 3.3 (3). I'm using Flex 4.6.0 SDK. The project is setup on Windows7.
In order to work on iOS devices, Burstly requires a number of frameworks and librares (4)
I managed to write and compile the .a library for iOS. I also have the interface (actionscript code) that will be shared for Android and iOS compiled into a swc and a librairy.swf. All of this is successfully packaged into a .ane which is included in my project.
When compiling a .a library on MacOS, all the framework and library used don't seems to be packaged in the ".a". This is why I had to use Air 3.3, for the -platformsdk option(5).
Since I work on Windows, I followed the instruction in this post to get the iOS SDK (6).
Following (4) and (5), I made a platformConfig.xml file like this, which is packaged in the .ane
    <platform xmlns="http://ns.adobe.com/air/extension/3.1">
        <sdkVersion>4.2</sdkVersion>
        <linkerOptions>
            
            <option>-framework AssetsLibrary</option>
            <option>-framework AudioToolbox</option>
            <option>-framework AddressBook</option>
            <option>-framework AVFoundation</option>
            <option>-framework CFNetwork</option>
            <option>-framework CoreLocation</option>
            <option>-framework MapKit</option>
            <option>-framework MediaPlayer</option>
            <option>-framework MessageUI</option>
            <option>-framework OpenAL</option>
            <option>-framework OpenGLES</option>
            <option>-framework QuartzCore</option>
            <option>-framework StoreKit</option>
            <option>-framework SystemConfiguration</option>
            <option>-framework Foundation</option>
            <option>-framework CoreGraphics</option>
            <option>-libsqlite3</option>
            <option>-libxml2</option>
            <option>-libz</option>
        </linkerOptions>
    </platform>
and this is the line to compile the actuale .ane
    call "%FLEX_SDK%\bin\adt" -package -target ane ../release/burstlyadsextension.ane extension.xml -swc burstlyAds.swc -platform iPhone-ARM library.swf libBurstlyAds.a -platformoptions platformConfig.xml
Problem arises when I try to package the iOS app with ADT:
    call adt -package -target %TYPE%%TARGET% %OPTIONS% %SIGNING_OPTIONS% "%OUTPUT%" "%APP_XML%" %FILE_OR_DIR% -extdir lib/external/ -platformsdk ../Libraries/iPhoneOS5.0.sdk/
this happens:
"ld: library not found for -libsqlite3
Compilation failed while executing : ld64"
frameworks seems to be added fine, but the dylib are not. I tried to add the line:
    <option>-L usr/lib/</option>
before including the lib, but I got this error instead:
"ld: warning: directory not found for option '-Lusr/lib/'
ld: library not found for -libsqlite3
Compilation failed while executing : ld64"
I tried to use the full path, other relative path, but no matter what path I put in the option, I always get a "warning: directory not found for option". Even "<option>-L ../</option>" give me this warning. The only thing that seems to work is "<option>-L /../</option>", but my .dylib obviousle are not there.
So my questions are: What did I do wrong? Any idead what else I could try? Even an explanation as to why it is not working would be helpful!
Links:
#1: http://support.burstly.com/
#2: http://www.flashdevelop.org/
#3: http://get.adobe.com/fr/air/        //Sorry, my OS is in french
#4: http://support.burstly.com/kb/ios/required-compiler-flags-frameworks
#5: http://blogs.adobe.com/rajorshi/2011/11/16/ios5-support-for-airusing-external-sdks-to-pack age-apps/
#6: http://blogs.adobe.com/airodynamics/2012/05/18/using-platformsdk-for-ios-on-windows/

Thanks a lot, that took care of the
"ld: library not found for -libsqlite3
Compilation failed while executing : ld64"
But now, I'm stuck with this error instead:
ld: warning: -ios_version_min not specificed, assuming 4.0
Undefined symbols for architecture armv7:
"_ADBannerContentSizeIdentifier480x32", referenced from:
      +[Burstly_iad_Adaptor initializeContentSizeIdentifiers] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
      -[Burstly_iad_Adaptor supportedSizes] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
"_OBJC_CLASS_$_ADBannerView", referenced from:
      objc-class-ref in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
"_OBJC_CLASS_$_EKEventStore", referenced from:
      objc-class-ref in libcom.bhvr.burstlyads.a(BurstlyORMMAView.o)
"_OBJC_CLASS_$_FlurryAnalytics", referenced from:
      objc-class-ref in libcom.bhvr.burstlyads.a(Burstly_flurry_Adaptor.o)
"_OBJC_CLASS_$_CMMotionManager", referenced from:
      objc-class-ref in libcom.bhvr.burstlyads.a(BurstlyORMMAJavascriptBridge.o)
"_ADBannerContentSizeIdentifier320x50", referenced from:
      +[Burstly_iad_Adaptor initializeContentSizeIdentifiers] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
      -[Burstly_iad_Adaptor supportedSizes] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
      -[Burstly_iad_Adaptor makeSizesSetWithArray:] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
"_MedialetsShouldLogDebug", referenced from:
      -[MedialetsAdServer sendAppPixelWithURL:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer adFitsSlot:adID:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer nextAdFromList:forTargetKey:keywords:andBlockKeywords:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer isAdValidForSlot:forTargetKey:keywords:andBlockKeywords:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer nextAdForAdView:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer startCacheLoad] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer processReceivedData:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
"_OBJC_CLASS_$_EKEvent", referenced from:
      objc-class-ref in libcom.bhvr.burstlyads.a(BurstlyORMMAView.o)
"_ADBannerContentSizeIdentifierPortrait", referenced from:
      +[Burstly_iad_Adaptor initializeContentSizeIdentifiers] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
"_OBJC_CLASS_$_CTTelephonyNetworkInfo", referenced from:
      objc-class-ref in libcom.bhvr.burstlyads.a(BurstlyUtils.o)
"_ADBannerContentSizeIdentifierLandscape", referenced from:
      +[Burstly_iad_Adaptor initializeContentSizeIdentifiers] in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
"_MedialetsShouldLogInternal", referenced from:
      -[MedialetsAdServer init] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer qualifiedAdsFromList:forAdView:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer qualifiedAd:foradSlotKey:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer nextAdFromList:forTargetKey:keywords:andBlockKeywords:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer nextAdForAdView:] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer attemptCacheLoad] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
      -[MedialetsAdServer startCacheLoad] in libcom.bhvr.burstlyads.a(MedialetsAdServer.o)
"_OBJC_CLASS_$_FlurryAppCircle", referenced from:
      objc-class-ref in libcom.bhvr.burstlyads.a(Burstly_flurry_Adaptor.o)
"_OBJC_CLASS_$_ADInterstitialAd", referenced from:
      objc-class-ref in libcom.bhvr.burstlyads.a(Burstly_iad_Adaptor.o)
ld: symbol(s) not found for architecture armv7
Compilation failed while executing : ld64
Which is the same error as when I did not include any library at all.
Any other insight?

I cannot find my serial numbers for installation anywhere on my CS5 box set?

I received my CS5 box set about 3 years ago and installed it all fine to my MacBook Pro then. I recently wiped and reformatted my Mac as it was becoming slow. All the software was backed up on my hard drive, however after reading forums it sounds like Adobe aren't all inclusive style apps, so need reinstalling with a disk. I have my full box set but when it came to install I cannot find my serial numbers ANYWHERE. When I went onto customer care it shows that they should be on the back of the DVD sleeves. I really need to install these programs back and I'm getting quite frustrated, help?!

To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
You might be able to find your serial number thru your Adobe account online if you registered the products when you originally installed them.
Beyond all that your last hope will be in contacting Adobe support thru chat to see if they can assist:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

HT204291 I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for

I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?

If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
Bob G

Content size when creating a PDF in Numbers for iOS

I want to create a PDF document from Numbers for iOS, but it will not allow me to center content on the page or resize it to take the whole page. I can do it if I try to print a document, I can adjust the size of my content, but if I just want to create a PDF, it makes my content small and all bunched up in the top left corner and the document does not look good.

I suspect that even if you could find the mapping information (pass as to where) it would simply tell you that Style A in Fm was mapped to Style B in Rh but not give you any information about how Style A was defined in Fm.
I think your only options are to create a CSS as you suggest or, as I would, create redefine the Word Style Mapping Template to suit. By going to Word first, you can edit the output for better page breaks and other tweaking you might want.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do you create forms in numbers the same as in numbers for ios

I have a Macbook Running Maveriks 10.92 and Ipad running IOS7. I have numbers on both machines. On the Ipad there is a function that allows you to add a form to enter data from a sheet using Popups.
I can not find this function on the Macbook Pro.
All versions are the latest.

Numbers for iOS supports forms.
Numbers for OS X does not support forms (yet).
Make a request for this feature using the Provide Numbers Feedback item in the Numbers menu.
Regards,
Barry

HT4623 i have an ipad2 and cannot find how to upgrade to ios 6, despite visiting apple site, itunes etc. Apple is normally intuitive but this is a real labarynth?

i have an ipad2 and cannot find how to upgrade to ios 6, despite visiting apple site, itunes etc. Apple is normally intuitive but this is a real labarynth?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

SSRS Sharepoint Integrated Mode logs - Cannot find site lookup info for request Uri AND [Forced due to logging gap]

Hi,
Our reports run very slow in SharePoint Integrated mode. I look at the logs and I see that for one report request there are bunch of "Forced due to logging gap" rows. Is it some kind of a configuration issue or is it working as it should. Below
is the full log for one report request. I have no admin experience at all and I am confused what each one in the logs mean. I have made some of them in bold font as I suspect it is some kind of configuration issue there. Could you please help understanding
those logs?
Line 25: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://xxxxx.com:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Streaming/ProcessStreamRequest'
MessageId: 'urn:uuid:10b1c246-8c70-400b-9b62-fe0d87a2ae8c'
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 28: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SQL Server Reporting Services
Report Server WCF Runtime
0
Medium
Entering ExeuteCommand - Command = Render
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 29: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Authentication Authorization
agb9s
Medium
Non-OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 30: 07/29/2014 09:17:34.54
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
adyrv
High
Cannot find site lookup info for request Uri http://xxx:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 31: 07/29/2014 09:17:34.59
w3wp.exe (0x0A6C)
0x070C
SQL Server Reporting Services
Report Server Catalog
0
Medium
RenderForNewSession('https://xxx.com/xxx.rdl')
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 32: 07/29/2014 09:17:34.60
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Authentication Authorization
ajmmt
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.59, Original Level: VerboseEx] SPRequestParameters: AppPrincipal={0}, UserName={1}, UserKye={2}, RoleCount={3}, Roles={4}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 33: 07/29/2014 09:17:34.60
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
8acb
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 34: 07/29/2014 09:17:34.62
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
adyrv
High
Cannot find site lookup info for request Uri http://xxx:32843/6ce1fa50211546eeabe466d78f0d32a6/ReportStreaming.svc.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 35: 07/29/2014 09:17:34.74
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.63, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 36: 07/29/2014 09:17:34.74
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
6t8b
High
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 37: 07/29/2014 09:17:34.85
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Runtime
afu6a
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.77, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 38: 07/29/2014 09:17:34.85
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Runtime
afu6b
High
[Forced due to logging gap, Original Level: VerboseEx] No SPAggregateResourceTally associated with thread.
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 39: 07/29/2014 09:17:34.94
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.88, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 40: 07/29/2014 09:17:34.94
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 103: 07/29/2014 09:18:05.55
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, cached @ 07/29/2014 09:17:34.96, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 104: 07/29/2014 09:18:05.55
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
6t8b
High
[Forced due to logging gap, Original Level: Verbose] Looking up {0} site {1} in the farm {2}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 105: 07/29/2014 09:18:05.62
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
General
6t8h
High
[Forced due to logging gap, cached @ 07/29/2014 09:18:05.55, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 106: 07/29/2014 09:18:05.62
w3wp.exe (0x0A6C)
0x070C
SharePoint Foundation
Database
7t61
High
[Forced due to logging gap, Original Level: Verbose] {0}
894aa99c-9fb3-c007-caf4-32ba68af9901
Line 107: 07/29/2014 09:18:05.62
w3wp.exe (0x0A6C)
0x070C
SQL Server Reporting Services
Report Server WCF Runtime
0
Medium
Processed report. Report='https://xxx.com/xxx.rdl', Stream=''
894aa99c-9fb3-c007-caf4-32ba68af9901
Thank you.

That is likely the case as native mode is quicker than SharePoint-integrated.
A couple of things to check, and perhaps change if you can:
1) Make sure the latest SSRS ReportViewer is deployed to the SharePoint WFEs. This does not have to match your SSRS deployment version. See http://msdn.microsoft.com/en-us/library/gg492257.aspx
for the compatibility table.
2) If possible, move SSRS to the same SharePoint servers that end users interact with (e.g. the "WFEs").
3) Make sure the underlying server hosting SharePoint has C-States disabled (these are Intel C-States, e.g. C1, C2, C3... aka processor sleep states). If the server has any sort of power regulation, make sure it is at maximum performance (rather than some
form of power saving).
4) Make sure the underlying Windows OS has it's Power Management set to Maximum, rather than any sort of power savings.
You can review the execution logs in the Reporting Services database. Take a look at the ExecutionLog3 view. Compare the TimeProcessing (time it takes to process the report) and TimeRendering (time it takes for the processed report to render to the end user).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Is it possible to search for a specific term or data in Numbers for iOS?

I looked for similar questions, but all of the similar questions did not specify if they were talking about the Mac version or the iOS. So I apologize if the question has been asked.
Is there a way to search for a specific term or criteria in Numbers for iOS?
My father owns a small business and has a large inventory of parts. He wants a simple way to search his inventory for a particular part number and see how many of a the specific part number he has in his inventory, while not in the shop or having to call in. He wants to take an iPad along with him.
My first thought was to create an spreadsheet. I have a basic knowledge of how spreadsheets work, and I don't think my father would like anything more complicated.
I was thinking about making the 1st column list the part number, 2nd column list the quantity in the shop, 3rd column list the quantity in the truck.
If Numbers for iOS is not able to do this, suggestions for alternatives are welcome.
Thanks in advance

Hi j4nitor
Would the "Find" option in the "Tools" menu do the job?
If you search for the part number, it will be highlightet, and with your outline for a setup, I guess that would give you the overview you are talking about.
Hope it helps.
Best regards
Ole

Numbers for IOS -- How to paste formulas and/or change formatting

I'm a brand new user of Numbers for IOS (version 5.0.1) on my iPhone... It was suggested in the iWork > Numbers forum that I check in one of the IOS forums for help with this version of Numbers, and the iPhone forum has a comment to the effect that there are more IOS Numbers users in the iPad forum.... So here's my question:
I received an email with a cute countdown formula for the new year, =10*9*8+7+6-5+4*321 so I copied it from my email, and pasted it into a cell in Numbers for IOS. I found that it won't paste at all (the black "Paste" symbol doesn't appear) unless I hit the "T" for text mode, so that's what I did, and I pasted it into the cell of a table. But it shows up simply as =10*9*8+7+6-5+4*321, not the value of that expression, which is supposed to be 2012. So I double-clicked a different cell, and selected the = symbol, and then tried to paste the formula into the green bar at the top, but like I said, the only thing that pops up in that mode is the magnifying glass. So I typed the formula in, using the x in place of the asterisks, and it worked just fine. So I can use formulas, and I can paste text into cells, but I just can't paste text into cells and have Numbers interpret the text as a formula. Any hints? Thanks!

This isn't a pro answer but I found if you use the + cursor and select all cells and the set font, color or whatever you want, when you then go to specific cells, it will be the way you want.

Error message: (translated from Dutch) "Cannot find corresponding style page for media query"

Error message: (translated from Dutch) "Cannot find corresponding style page for media query"(see image)
I cannot find what is wrong with this page: steun sesem
This message does not appear on the other pages of this site..
What do I wrong??
Thanks in advance!
Martien

There are two things that are probably causing this error.
Line 22 in your HTML looks like this:
</style><!--[if lt IE 9]>
You need to remove the closing style tag:
</style><!--[if lt IE 9]>
Also in sesem.css, there's a missing closing brace on line 486:
.footer {
font-size: 1.1em;
line-height: 1.4em;
color: #878787;
text-align: center;
} // <---- Missing closing brace
/* Desktop Layout: 769px to a max of 1232px. Inherits styles from: Mobile Layout and Tablet Layout. */
There are other problems in your CSS, but fixing those two items should put you back on the right track.

I cannot find my original disks for Adobe Web Premium CS4. How do I move the software from my old laptop to a new one?

I purchased a new laptop and am in the process of installing all my software. Due to a recent move, I cannot find my installation disks for Web Premium CS4. Is there a way to move the software from the old laptop to the new one? I am a casual user of the software and do not want to upgrade to a new version.

Download CS4 products
Mylenium

How do I reinstall Lion if I get a new hard drive? My mac came with Leopard and I cannot find my upgrade disk for Snow Leopard

My MacBook Pro originally came with Leopard. I have the OS and Applications disks for Leopard but I cannot find my upgrade disk for Snow Leopard. I would like to perform a clean install of Lion on the new hard drive and restore some data from my Time Machine backup. I am not looking to restore the current image to my new hard drive. I have not yet removed the exisiting hard drive nor have I wiped my data.

The only way to do that is to buy a New SL Retail DVD. Or you could buy the Lion Install USB thumb drive from Apple for $69.
You must have SL installed to then install Lion or have a thumb drive with the Lion installer.
You could also create a Lion USB Recovery thumb drive using Lion Disk Assistant. But you need to have Lion already installed and the Lion RecoveryHD Partition on your drive to make the Recovery thumb drive.
Lion Recovery Disk Assistant

Cannot find "Plug-ins" folder for Photoshop CS6 on my Mac.

I cannot find ”Plug-ins" folder for Photoshop CS6 on my Mac. Path suppose to be Macintosh HD > Applications  > Adobe Photoshop CS6 > Plug-Ins but that folder is missing. Any suggestion on how to find it?

Thank you Hans,
If I understand it correctly, way to install extensions/plugins on Mac is
following
"Quit Photoshop, then copy the desired plug-ins (or extensions) to the
following locations:
Mac OS:
   - Applications/Adobe Photoshop CC/Plug-ins folder
   - Applications/Adobe Photoshop CS6/Plug-ins folder"
In my case it would be the last path, as I have CS6.
However, my problem is that Plug-ins folder is missing
Regards
Goran
2014-06-01 21:42 GMT+02:00 hans-g. <[email protected]>:
    Cannot find ”Plug-ins" folder for Photoshop CS6 on my Mac. created
by hans-g. <https://forums.adobe.com/people/hans-g.> in *Photoshop
General Discussion* - View the full discussion
<https://forums.adobe.com/message/6425830#6425830>

Why Is it that I cannot find my album covers for many of my Itunes for my IPOD? However I find them online with Google or bing but not with ITUNES Store. The thing is I can't drag and drop them into my itunes folder

Why Is it that I cannot find My album covers for my Itunes at the Itunes store? But I can find them online searching with Google or bing/

Hi, I had sometimes (not always) the smae problem. Solved it by saving the pic to my desktop and then opened it from itunes (via ADD pic). That solved my it for me. Rgds

Cannot find font in numbers for ios

Similar Messages

Maybe you are looking for