Cannot find format type named Date/Time

Running latest Dreamweaver on Vista - I get a nasty pop-up
window if I try to edit one of the predefined date formats -
"Cannot find format type named Date/Time."
I've tried deleting configuration setting to no avail. Anyone
else experienced this problem or have any suggestions ?

Hello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
     Logical Form Name    = HR_IN_EPF12A_99M
     Form Variant         = (Leave this field blank)
     End Date             = 31.12.9999
     Start Date           = 01.01.1990
     Form Type            = SAP Script (SSC)
     Def. Type            = (This field should be checke
     PDF Form Name        = HR_IN_EPF12A_99M
     SAP Script Form Name = HR_IN_EPF12A_99M
     Smart Form Name      = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana

Similar Messages

Cannot find the XObject named Fm0003.

I am built a three page AOD report. When I run Test Presentment, the first two pages of the pdf display correctly on the screen, as I page down. When I page down to the third page I get the above message --"Cannot find the XObject named Fm0003". I click OK, and then get the following message --"Could not find font in resource library, using Helvetica instead". The font that I'm using throughout the report is a Times New Roman. The first two pages are in Times New Roman and the third page is in a different font. I welcome anyone who can educate me to what is happening in AOD. Thanks.
Questions:
* How do I find the XObject named Fm0003?
* How do I determine what font is missing from the resource library?

Found this post when troubleshooting the error message "Could not find Xobject named '3'". If anyone else runs into the same issue when creating a PDF by importing from a scanner, my issue was a bad cmos battery that set the incorrect date. I changed the date and time to current and was importing PDFs again.

Cannot find PDL type for output device '(Printer name)'

Hi,
After seeing the statutory reports (PF, ESI etc) in standard format, we try to print form. We get the below error:
Cannot find PDL type for output device '(Printer name)'
Message no. FPRUNX113
Diagnosis
No PDL type has been found for the specified output device.
System Response
Error message
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 685571.
Any input will be off great help...
Regards
Pooja

Hello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
     Logical Form Name    = HR_IN_EPF12A_99M
     Form Variant         = (Leave this field blank)
     End Date             = 31.12.9999
     Start Date           = 01.01.1990
     Form Type            = SAP Script (SSC)
     Def. Type            = (This field should be checke
     PDF Form Name        = HR_IN_EPF12A_99M
     SAP Script Form Name = HR_IN_EPF12A_99M
     Smart Form Name      = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana

Cannot find PDL type for output device LOCL in J1INCRT

Dear all
I am getting error in PRD system. When I am running J1INCRT (Customizing for Certificate Printing) the error
cannot find PDL type for output device LOCL
we are using ECC6 ,oracle 10g and windows 2003
Kernel release    701
Please suggest how to solve
Regards,
Kumar

Hello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
     Logical Form Name    = HR_IN_EPF12A_99M
     Form Variant         = (Leave this field blank)
     End Date             = 31.12.9999
     Start Date           = 01.01.1990
     Form Type            = SAP Script (SSC)
     Def. Type            = (This field should be checke
     PDF Form Name        = HR_IN_EPF12A_99M
     SAP Script Form Name = HR_IN_EPF12A_99M
     Smart Form Name      = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana

Cannot implicitly convert type 'System.Data.SqlClient.SqlDataReader' to 'Microsoft.ReportingServices.DataProcessing.IDataReader'. An explicit conversion exists (are you missing a cast?)

Cannot implicitly convert type 'System.Data.SqlClient.SqlDataReader' to 'Microsoft.ReportingServices.DataProcessing.IDataReader'. An explicit conversion exists (are you missing a cast?)
I am getting the above error in c#. Please help me. Thanks in advance
public IDataReader ExecuteReader(CommandBehavior behavior)
string query = "select * from Sales.Store";
SqlConnection readerconn = new SqlConnection("Data Source=localhost;Initial Catalog=AdventureWorks2000;Integrated Security=SSPI");
SqlCommand readercmd = new SqlCommand(query);
try
readerconn.Open();
readercmd = readerconn.CreateCommand();
readercmd.CommandText = query;
readercmd.CommandType = System.Data.CommandType.Text;
SqlDataReader TestReader = readercmd.ExecuteReader();
return TestReader; //Getting error at this line
readerconn.Close();
catch (Exception e)
throw new Exception(e.Message);

Hi,
Please firstly take a look at the documentation:
IDbCommand.ExecuteReader
Method
Users do not create an instance of a
DataReader class directly. Instead, they obtain the
DataReader through the
ExecuteReader method of the Command object. Therefore, you should mark
DataReader constructors as internal.
You need to use this method to get the IDataReader object, all the IDbCommand and IDataReader are in the Microsoft.ReportingServices.DataProcessing namespace. There's another IDataReader object which is in System.Data namespace, but they're actually two different
objects, that's why you got the exception.
For how to properly implement this Microsoft.ReportingServices.DataProcessing.IDataReader, please check this documentation:
Implementing a DataReader Class for a Data Processing Extension
It also provides code samples there.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot find symbl method update Date(int,java.util.Date)

I get following error
cannot find symbl method update Date(int,java.util.Date) on compling class called GuestDataBean at line ( rowSet.updateDate( 4, guest.getDate() ); ).
GustBean.java. I need help on why I get it.
// JavaBean to store data for a guest in the guest book.
package com.deitel.jhtp6.jsp.beans;
import java.util.*;
public class GuestBean
   private String firstName;
   private String lastName;
   private String email;
   private Date date;
   private String message;
   //Constructors
   public GuestBean(){
        public GuestBean(String firstname, String lastname, String email,Date date,String message){
             this.firstName=firstname;
             this.lastName=lastName;
             this.email=email;
             this.date=date;
             this.message=message;
   // set the guest's first name
   public void setFirstName( String name )
      firstName = name;
   } // end method setFirstName
   // get the guest's first name
   public String getFirstName()
      return firstName;
   } // end method getFirstName
   // set the guest's last name
   public void setLastName( String name )
      lastName = name;
   } // end method setLastName
   // get the guest's last name
   public String getLastName()
      return lastName;
   } // end method getLastName
   // set the guest's email address
   public void setEmail( String address )
      email = address;
   } // end method setEmail
   // get the guest's email address
   public String getEmail()
      return email;
   } // end method getEmail
   public void setMessage( String mess)
      message = mess;
   } // end method setEmail
   // get the guest's email address
   public String getMessage()
      return message;
   } // end method getEmail
   public void setDate( Date dat )
      date = dat;
   } // end method setEmail
   // get the guest's email address
   public Date getDate()
      return date;
   } // end method getEmail
} // end class GuestBean
GuestDataBean.java/**
* @(#)GuestDataBean.java
* @author
* @version 1.00 2008/7/18
// Class GuestDataBean makes a database connection and supports
// inserting and retrieving data from the database.
package com.deitel.jhtp6.jsp.beans;
import java.sql.SQLException;
import javax.sql.rowset.CachedRowSet;
import java.util.ArrayList;
import com.sun.rowset.CachedRowSetImpl; // CachedRowSet implementation
import java.sql.*;
public class GuestDataBean
   private CachedRowSet rowSet;
   // construct TitlesBean object
   public GuestDataBean() throws Exception
      // load the MySQL driver
      Class.forName( "org.gjt.mm.mysql.Driver" );
      // specify properties of CachedRowSet
      rowSet = new CachedRowSetImpl();
      rowSet.setUrl( "jdbc:mysql://localhost:3306/virsarmedia" );
      rowSet.setUsername( "root" );
      rowSet.setPassword( "" );
       // obtain list of titles
      rowSet.setCommand(
         "SELECT firstName, lastName, email,date,message FROM guest" );
      rowSet.execute();
   } // end GuestDataBean constructor
   // return an ArrayList of GuestBeans
   public ArrayList< GuestBean > getGuestList() throws SQLException
      ArrayList< GuestBean > guestList = new ArrayList< GuestBean >();
      rowSet.beforeFirst(); // move cursor before the first row
      // get row data
      while ( rowSet.next() )
         GuestBean guest = new GuestBean();
         guest.setFirstName( rowSet.getString( 1 ) );
         guest.setLastName( rowSet.getString( 2 ) );
         guest.setEmail( rowSet.getString( 3 ) );
         guest.setDate( rowSet.getDate( 4 ) );
         guest.setMessage( rowSet.getString( 5 ) );
         guestList.add( guest );
      } // end while
      return guestList;
   } // end method getGuestList
   // insert a guest in guestbook database
   public void addGuest( GuestBean guest ) throws SQLException
      rowSet.moveToInsertRow(); // move cursor to the insert row
      // update the three columns of the insert row
      rowSet.updateString( 1, guest.getFirstName() );
      rowSet.updateString( 2, guest.getLastName() );
      rowSet.updateString( 3, guest.getEmail() );
      rowSet.updateDate( 4, guest.getDate() );
      rowSet.updateString( 5, guest.getMessage() );
      rowSet.insertRow(); // insert row to rowSet
      rowSet.moveToCurrentRow(); // move cursor to the current row
      rowSet.commit(); // propagate changes to database
   } // end method addGuest
} // end class GuestDataBean

This isn't a JSP question, it better belongs in the JavaProgramming, or JDBC forums.
But the problem is because the updateDate method uses a java.sql.Date object and you are giving it a java.util.Date object. You have to convert from java.util.Date to java.sql.Date. See: [the api for java.sql.Date|http://java.sun.com/javase/6/docs/api/java/sql/Date.html] .
Edited by: stevejluke on Jul 21, 2008 5:43 PM

How to find the last update date time and user of record field peoplecode

how to find the last update date time record field peoplecode?
Thank you.

One can check the last update date time using the following query
SELECT LASTUPDDTTM FROM PSPCMPROG WHERE OBJECTVALUE1 LIKE 'RECNAME' AND OBJECTVALUE2 LIKE 'FIELDNAME'

Error when trying to install the iSCSI target - Cannot find the Windows PowerShell data file 'ImportExportIscsiTargetConfiguration.psd1'

Hi,
I'm just attempting to setup an iSCSI target on a freshly installed Windows 2012r2 box, but I get the following error when attempting to Create and iSCSI virtual disk via the wizard after a successful
installation of the iSCSI target role.
The full error is:
Cannot find the Windows PowerShell data file 'ImportExportIscsiTargetConfiguration.psd1' in directory 'C:\Windows\System32\WindowsPowerShell\v1.0\Modules\IscsiTarget\en-GB\', or in any parent culture.
I tried to uninstall, then reinstall the role but no go.
The Server Locale and UI was all updated to en-GB but this folder does not appear to exist in this location. Rather, the folder I can see is:
'C:\Windows\System32\WindowsPowerShell\v1.0\Modules\IscsiTarget\en-US\'
I'm going to attempt to copy the 'en-US' folder to 'en-GB' to see what happens, but I would like to know why this has occurred in the first place? Other roles have installed (such as AD DS AD CS and
IIS) on other machines with no issue.
Many thanks
Chris
Chris

Hi Chris,
The error "Cannot find the Windows PowerShell data file 'ImportExportIscsiTargetConfiguration.psd1'" occured, because the file 'ImportExportIscsiTargetConfiguration.psd1' can't be loaded under the folder en-GB with current culture.
I recommend you can copy this .psd1 file under 'C:\Windows\System32\WindowsPowerShell\v1.0\Modules\IscsiTarget'. Essentially if PowerShell can’t find the specified data file for the current culture it will “fallback” to the top-level data
file in this case.
For more detailed information, please refer to this article:
Windows PowerShell 2.0 String Localization
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

TOC - Receiving a "Cannot find the file named" error when pressing Ctrl+alt

When I generate a TOC, it comes out beautifully. However, when I press control + alt to check my links, I receive a "cannot find the file named" error message. This happens for the majority of the links. All of the files are present along with the graphics. Everything is in the same folder. They are saved on our network. However, I have packaged and copied the files to my desktop to see if that makes a difference. I am still receiving the same error message.
Has anyone seen this before? Any solutions in Adobe world? All help is appreciated.
Salome

>>> ... avoid using & in your document titles.
>> By that do you mean in your file names?
> Yes. That's correct.
That's not at all surprising. & is commonly found on lists of random "characters to avoid in directory and file names".
A comprehensive list of such characters might be impossible to assemble. Even though FM only runs on Windows these days, it could be in a VM on another OS (with its own restrictions, e.g. Mac), using a CMS (with its own restrictions) and working with virtual directories actually located on completely different operating systems (with their own restrictions, e.g. Unix, Linux/Samba, random cloud).
And then there are naming issues in the FM app itself (and other Adobe apps that might need to process the files, like Distiller), which apparently is the case for the comma problem (it may only pop up during render to PDF).

Configure cannot find FILE type on DragonFly BSD

Around line 28552 in dist/configure, there is an if clause "if (sizeof (ac__type_new_))". Since it is not a defined type in POSIX/SUSv3 (only FILE* is) the check dies in DragonFly with the following message:
error: invalid application of `sizeof' to incomplete type `conftest.c'
Changing "if (sizeof (ac__type_new_))" to "if (sizeof (ac__type_new_ *))" fixes the problem.

As far as I know the structure itself is not defined anywhere (at least I cannot find it), nor is it mentioned anywhere if it should be a complete type or an incomplete type.
An application cannot know what FILE is (is it an incomplete type or even what it contains), that is why I misphrased and said that it is not a defined type (more or less intentionally since knowing nothing about it, it might as well be undefined).
Also searching through the specs, I have not yet found any instance of FILE being returned from a defined function or used as a parameter, only FILE*.

Lost a folder, cannot find under favorites, named for individual and somehow lost. Any thoughts on retrieving?

Folder named Marti, not showing and cannot find prompt to bring it back

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
See also:
*http://kb.mozillazine.org/Lost_bookmarks

Finder and wrong Created dates/times

I've noticed this glitch in Tiger and Snow Leopard, and it has remained in Lion. When I have a Finder window open (whether in List or Column view), I notice that a number of files show the Created date and time as 12-31-69 5:00 PM. Even if I check the file info (Command-I), I get the same results. Yet when I import a photo file with such a date/time into say Aperture or Lightroom, for example, the original created date is proper, which tells me that my Mac isn't corrupting this information, it's just not rendering it properly in Finder.
Anyone else having this problem with Finder? More importantly, does anybody know if there is a fix for this?

Copying files from a backup should not alter the created/modified dates, I just tested that.
Why don't you try a TM restore on one of the files and see if it works.

How to find out the last date & time on which a program has been run

Hi Experts,
Can anybody tell how to find out the last date on which a purticular program has been run.
Valuable answers will be rewarded.
Thanks & Regards,
Satish.

Hi!
Try STAD transaction. Unfortunately it contains a huge amount of data, so it is available only for a few days backwards... Maybe some weeks, but you can't make yearly reports from its data... So it's not useful to see, which program is in use or not...
I planned once to download it weekly, but it was not so important...
Regards
Tamá

Lookout Reports Dynamic File Naming - Date/time format

Looking for any ideas to format the file name of Lookout reports to yyyy-mm-dd-hh-mm-ss
I can get the decimal equivalent of date using a system function such as now(hourly_timer), but can't figure out how to set the display format for such an object into the file name output field of the report object.
Thanks,
Ed

Hi Ed,
Do these have to be PDF files? Can they be HTML files? If HTML (or even BMP) is fine, here's one option:
1. Use the Report Object
2. Note that the generated file's name can be dynamic -- tie in the datetime expression here, for instance.
3. Make the following connection:
Report1.Display1 = Panel1.graphic
Where Panel1 is the panel you want to capture.
4. Use the Generate logical datamember of the Report Object to generate the HTML file. It will copy and paste (will link to, actually) the panel nicely into the HTML file. The actual panel screenshot is saved as graphic1.bmp in the same folder -- which by itself should suffice as a record. But then you would have to make the folder structure based on datetime, etc., to be able to distinguish the screenshots.
By the way, I fail to see why the Panel's title -- which is what gets sent as filename to the printer -- has to be static. It's not the Object name. There's no reason for it to be static.. unless I am missing something. See, we could easily change this if.....
Anyways, hope this gives you some options.
Regards,
-Khalid
Message Edited by Khalid on 11-02-2006 01:02 AM

Finding and showing file date/time i'm referencing on

How can I find and show on page the date and time parameters of file on which i'm referencing with using an JSP? I tried it with java.io.*,
<%@ page import="java.io.*"%>
<%@ page import="java.awt.*,javax.swing.text.*"%>
<%@ page contentType="text/html; charset=windows-1250"%>
<%
File u_file=new File("http://oracle1/pn/index.html");
long dat=u_file.lastModified();
Date u_date=new Date(dat);
%>
<%=u_file.getPath()%>
<%=u_file.getName()%>
<%=u_file.isFile()%>
<%=u_date%>
but the date was always 0(1.1.1970) ,result of isFile was null, but result of Pathname and Name was correct.
What is wrong?

From the JSP, if you say, File file = new File(path);
It will try to search for the file starting from the bin directory (I am using tomcat). So, you need to give the full path to the file from there.
For example, if your file is in, webapps/examples/html/ directory, you need to use something like this,
File file = new File("../webapps/examples/html/index.html");
You can't give URL as the file name/path. You can't access Oracle's file system!!!
Hope this helps.
Sudha

Cannot find format type named Date/Time

Similar Messages

Maybe you are looking for