Cannot find the XObject named Fm0003.

I am built a three page AOD report. When I run Test Presentment, the first two pages of the pdf display correctly on the screen, as I page down. When I page down to the third page I get the above message --"Cannot find the XObject named Fm0003". I click OK, and then get the following message --"Could not find font in resource library, using Helvetica instead". The font that I'm using throughout the report is a Times New Roman. The first two pages are in Times New Roman and the third page is in a different font. I welcome anyone who can educate me to what is happening in AOD. Thanks.
Questions:
* How do I find the XObject named Fm0003?
* How do I determine what font is missing from the resource library?

Found this post when troubleshooting the error message "Could not find Xobject named '3'". If anyone else runs into the same issue when creating a PDF by importing from a scanner, my issue was a bad cmos battery that set the incorrect date. I changed the date and time to current and was importing PDFs again.

Similar Messages

  • Could not find the xobject named '3'.

    i am using Adobe Acrobat 6.0 Professional, and HP scanjet 2400. but after scan display this error "could not find the xobject named '3'." not create pdf file. way.

    Found this post when troubleshooting the error message "Could not find Xobject named '3'". If anyone else runs into the same issue when creating a PDF by importing from a scanner, my issue was a bad cmos battery that set the incorrect date. I changed the date and time to current and was importing PDFs again.

  • TOC - Receiving a "Cannot find the file named" error when pressing Ctrl+alt

    When I generate a TOC, it comes out beautifully. However, when I press control + alt to check my links, I receive a "cannot find the file named" error message. This happens for the majority of the links. All of the files are present along with the graphics. Everything is in the same folder. They are saved on our network. However, I have packaged and copied the files to my desktop to see if that makes a difference. I am still receiving the same error message.
    Has anyone seen this before? Any solutions in Adobe world? All help is appreciated.
    Salome

    >>> ... avoid using & in your document titles.
    >> By that do you mean in your file names?
    > Yes. That's correct.
    That's not at all surprising. & is commonly found on lists of random "characters to avoid in directory and file names".
    A comprehensive list of such characters might be impossible to assemble. Even though FM only runs on Windows these days, it could be in a VM on another OS (with its own restrictions, e.g. Mac), using a CMS (with its own restrictions) and working with virtual directories actually located on completely different operating systems (with their own restrictions, e.g. Unix, Linux/Samba, random cloud).
    And then there are naming issues in the FM app itself (and other Adobe apps that might need to process the files, like Distiller), which apparently is the case for the comma problem (it may only pop up during render to PDF).

  • Send spool as PDF, error in opening PDF- Could not find the XObject '00014'

    Hi
    I am sendind a spool as PDF and when opening the PDF I am getting error saying Could not find the XObject named ‘00014’.
    Please let me know how I can see the PDF contents proerly.
    Regards
    Bala

    Hi Bala
    Check the sample which can be useful for you.
    Pseudo code for sending PDF attachment:
    TABLES: tsp01.
      TYPES: BEGIN OF t_spool,
                          Rqident TYPE tsp01-rqident,
                    END OF t_spool.
      DATA: i_spool TYPE STANDARD TABLE OF t_spool,
                Wa_spool TYPE t_spool.
      SELECT rqident FROM tsp01
      INTO TABLE i_spool
    WHERE rqowner = sy-uname.
      SORT i_spool DESCENDING BY rqident.
      LOOP AT i_spool INTO wa_spool.
      ENDLOOP.
    YPES: l_ty_tab_pdf TYPE tline OCCURS 0.
      DATA: l_pdf TYPE l_ty_tab_pdf,
                l_spool TYPE tsp01-rqident.
    Type for binary attachment table.
      TYPES: l_ty_tab_objbin TYPE solisti1 OCCURS 0.
      DATA: l_objbin TYPE l_ty_tab_objbin.
                l_spool = wa_spool-rqident.
      CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'            
          EXPORTING
            src_spoolid                    = l_spool
            no_dialog                      = ' '
          TABLES
            pdf                            = l_pdf
          EXCEPTIONS
            err_no_abap_spooljob           = 1
            err_no_spooljob                = 2
            err_no_permission              = 3
            err_conv_not_possible          = 4
            err_bad_destdevice             = 5
            user_cancelled                 = 6
            err_spoolerror                 = 7
            err_temseerror                 = 8
            err_btcjob_open_failed         = 9
            err_btcjob_submit_failed       = 10
            err_btcjob_close_failed        = 11
            OTHERS                         = 12.
      IF sy-subrc <> 0.
        WRITE: / 'error', sy-subrc.
      ENDIF.
    **/ Convert the PDF format to the table type required for the attachment.
    CALL FUNCTION 'QCE1_CONVERT'
        TABLES
          t_source_tab         = l_pdf
          t_target_tab          = l_objbin
        EXCEPTIONS
          convert_not_possible = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
        WRITE: / 'error', sy-subrc.
      ENDIF.
    TABLES: soli.
      DATA: v_email TYPE soli-line.  “Manager’s Email
      DATA: l_adrnr LIKE kna1-adrnr. “Address Number
      DATA: l_objky TYPE nast-objky. “Object Key
      DATA: l_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
      DATA: l_objtxt    LIKE solisti1 OCCURS   0 WITH HEADER LINE.
      DATA: l_objpack   LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
      DATA: l_doc_chng  LIKE sodocchgi1.
      DATA: l_objhead   LIKE solisti1 OCCURS   0 WITH HEADER LINE.
      DATA: l_tab_lines LIKE sy-tabix.
      CONSTANTS: k_true TYPE boolean_flg VALUE 'X'.
      DATA: l_mail TYPE somlreci1-receiver.
      l_mail = v_email.
    Creation of the document to be sent as File Name
      l_doc_chng-obj_name = 'SENDFILE'.
    Mail Subject
      l_doc_chng-obj_descr =l_text-001.
    “Here text-001 will contains “Compensation Review Statement for Employee Name”
    Here we can concatenate employee first name and last name to l_text-001.
    Completing the recipient list
      l_reclist-receiver = l_mail. “Manager Email Address
      l_reclist-rec_type = 'U'.
      APPEND l_reclist.
    Mail Contents
      l_objtxt = text-002.
      APPEND l_objtxt.
    Calculate email size in bytes
      DESCRIBE TABLE l_objtxt LINES l_tab_lines.
      READ TABLE l_objtxt INDEX l_tab_lines.
      l_doc_chng-doc_size = (l_tab_lines - 1 ) * 255 + STRLEN( l_objtxt ).
    Creation of the entry for the compressed document for the email text
      CLEAR l_objpack-transf_bin.
      l_objpack-head_start = 1.
      l_objpack-head_num = 0.
      l_objpack-body_start = 1.
      l_objpack-body_num = l_tab_lines.
      l_objpack-doc_type = 'RAW'.
      APPEND l_objpack.
    Creation of the document attachment
    (Assume that the data in OBJBIN is in BMP format)
      DESCRIBE TABLE l_objbin LINES l_tab_lines.
      l_objhead = text-001.
      APPEND l_objhead.
      CLEAR l_objpack.
    Creation of the entry for the compressed/attached document
      l_objpack-transf_bin = k_true.
      l_objpack-head_start = 1.
      l_objpack-head_num = 1.
      l_objpack-body_start = 1.
      l_objpack-body_num = l_tab_lines.
      l_objpack-doc_type = 'PDF'.
      l_objpack-obj_name = text-005.
      l_objpack-obj_descr = text-001.
      l_objpack-doc_size = l_tab_lines * 255.
      APPEND l_objpack. "/ .
    Sending the document
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data              = l_doc_chng
          put_in_outbox              = 'X'
        TABLES
          packing_list               = l_objpack
          object_header              = l_objhead
          contents_bin               = l_objbin
          contents_txt               = l_objtxt
          receivers                  = l_reclist
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          operation_no_authorization = 4
          OTHERS                     = 99.
      IF sy-subrc <> 0.
        WRITE: / 'unsuccessful', sy-subrc.
      ELSE.
        WRITE:  / 'successful'.
      ENDIF.
    *Take note it is a requirement to do a commit work for the email to go into transaction   
      SOST.
    COMMIT WORK.  
    Regards,
    Sree

  • TS2570 Hi, MacBook Pro & Snow Leopard- startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode, and finally trying to get to archive&install the o/s, but it cannot find the destination volume. IsAn erase the only

    (10.6.8 Intel core duo 2009)
    Hi,
    I have a grey screen and grey rotating wheel startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode (which gave a subset of the errors that 'disk repair' did- namely- 'invalid sibling link,invalid record count, invalid node structure, invalid key length)  and finally trying to get to archive&install the o/s, but it cannot find the destination volume. Is an erase the only option? PS I have backed up most files individually, but my daughter did not back up any from her user account. Any help would be appreciated. J

    Gray, Blue or White screen at boot, w/spinner/progress bar
    Why is my computer slow?
    ..Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • The system cannot find the path specified - Problems

    I am having an issue that I am hoping someone can help figure out for me.
    I am currently learning Java, and am working with the Beginning Programming with Java for Dummies book second edition. I have downloaded and am running the Java 6 program and am using the JCreator 3.5Pro that was recommended to run the Practice files for the Dummies book.
    I have the practice files here:
    C/Program Files/Xinox Software/JCreatorV3/My Projects
    While trying to compile one of the practice files, I get this error message:
    --------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
    javac: file not found: src_mynewproject.txt (The system cannot find the path specified)
    Process completed.
    **When I try to execute, I get this error message:**
    --------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
    java.lang.NoClassDefFoundError: EchoLine
    Caused by: java.lang.ClassNotFoundException: EchoLine
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
    Could not find the main class: EchoLine. Program will exit.
    Exception in thread "main"
    Process completed.
    When I set up the new file, and the new class, I confirmed the file path.
    I know most people will ask if I am absolutely certain I put in the code in properly, and yes I did. It was a matter of copying word for word, and punctuation. I did it 100% correctly. About 12 times. I have NO idea what this means, but I would REALLY REALLY appreciate any help on this.
    Please keep in mind, I am slightly clueless, and really need to have any help dumbed down a bit. Lol.
    As a side note, this isn't my first project, and I haven't had this problem before now.
    thanks in advance. =)

    So I wanted to clarify what I've done a bit more since I decided to redownload the dummies programs for the program and try again.
    I will try to list my steps in order of what I did and see if I've gone wrong somewhere along the line.
    I downloaded my project files from here: http://ca.dummies.com/store/product/Beginning-Programming-with-Java-For-Dummies-2nd-Edition.productCd-0764588745,navId-322469,descCd-DOWNLOAD.html
    I unzipped them this time here: C:\Program Files\Java\jdk1.6.0_21\MyProjects\
    I opened JCreator 3.5 and starting fresh, with all previous projects deleted and clicked on "Open Workspace". I chose "MyWorkspace.jcw". Right clicked MyWorkspace and chose "Add new Project" and then chose "Empty Project". As per the books instruction for the first project, I named it "MyFirstProject". My file path was: C:\Program Files\Java\jdk1.6.0_21\MyProjects\MyFirstProject. Which is where I upzipped the files. I added it to current workspace and clicked finish.
    I then added a new class. As per the books instructions, I right clicked "MyFirstProject" and selected Add New Class. For the name, I used MyFirstJavaClass, which is what the book told me to do. My locations are the exact same as above. and I clicked on Generate new Method, as it told me to. Which it doesn't in the next few lessons, so I know this has nothing to do with it. For that and a few other reasons. Lol.
    I clicked on Finish.
    All I had to do was replace a single line of code. Not type it all in this time.
    Here is what shows up on the screen:
    class MyFirstJavaClass {
         * Method main
         * @param args
         public static void main(String[] args) {
              // TODO: Add your code here
    I need to change the : // TODO: Add your code here
    with the line:
    System.out.println.("Chocolate, royalties, sleep");
    When I do this, and compile project, I get this:
    --------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
    javac: file not found: src_myfirstproject.txt (The system cannot find the path specified)
    Process completed.
    AGAIN! But it worked a few days ago.
    And when I execute, I get this:
    --------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
    java.lang.NoClassDefFoundError: MyFirstJavaClass
    Caused by: java.lang.ClassNotFoundException: MyFirstJavaClass
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
    Could not find the main class: MyFirstJavaClass. Program will exit.
    Exception in thread "main"
    Process completed.
    I really hope the extra info helps someone help me!
    thank you!
    Edited by: MissPamela on Jul 19, 2010 3:23 PM

  • The system cannot find the file specified error in ftp upload

    Hi,
    i am using filezilla ftp server and apache common ftp client and while uploading a file i am getting below error:
    code to call ftp client
    String local_file ="D:\\home2.JPEG";
    String remote_file ="\\abc";
    ApacheFTPClient apacheFTP = new ApacheFTPClient();
    String[] abc ={"-s", "127.0.0.1", "Manender", "Manender", remote_file, local_file};
    apacheFTP.main(abc);
    error log:
    220-FileZilla Server version 0.9.31 beta
    220-written by Tim Kosse ([email protected])
    220 Please visit http://sourceforge.net/projects/filezilla/
    Connected to 127.0.0.1.
    USER Manender
    331 Password required for manender
    PASS Manender
    230 Logged on
    SYST
    215 UNIX emulated by FileZilla
    Remote system is UNIX emulated by FileZilla
    java.io.FileNotFoundException: D:\home2.JPEG (The system cannot find the file specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
         at com.po.ApacheFTPClient.main(ApacheFTPClient.java:152)
         at com.po.sample.main(sample.java:120)
    i have file in my d directory with same name.
    please help me in this.
    thanks in advace..

    i have file in my d directory with same name.Doesn't look like that? Are you sure that it isn't named e.g. home2.jpg?

  • System error 3 has occurred. The system cannot find the path specified

    Enterprise Manager 12c Release 2 - 12.1.0.2.0
    Agent Deployment Failed - host agent for Windows 32 bit, version 12.1.0.2
    Deployment Phase Name: Secure Agent
    Error: Execution of command C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent' on host myhost.mydomain.com Failed
    Cause: Error Message: System error 3 has occurred. The system cannot find the path specified. Exit Code :2
    Recommendation:
    Fix the cause of the error and retry the operation (or) manually run the following commands on the remote host
    C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat secure agent'
    C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent'
    C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat config agent addinternaltargets'
    Any ideas? thanks

    I installed Cygwin, and it's working fine I suppose. From my EM12c host I can connect to the Windows host via SSH:
    ssh WinHost
    The authenticity of host 'WinHost (XXX.XXX.XXX.XXX)' can't be established.
    RSA key fingerprint is XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX.
    Are you sure you want to continue connecting (yes/no)? yes
    Warning: Permanently added 'WinHost' (RSA) to the list of known hosts.
    oracle@WinHost's password:
    Last login: Wed Sep 19 17:26:40 2012 from SomeHost
    oracle@WinHost ~
    $ cygrunsrv -h
    Usage: cygrunsrv [OPTION]...
    Main options: Exactly one is required.
    -I, --install <svc_name>  Installes a new service named <svc_name>.
    -R, --remove <svc_name>   Removes a service named <svc_name>.
    ----------------- blah blah blah ------------------------------------
    Report bugs to <[email protected]>.
    oracle@WinHost ~
    $ date
    Thu, Sep 20, 2012 10:10:01 AM
    oracle@WinHost ~
    $ cd /cygdrive/c/oracle/product/emagent12/ - this is the folder where I try to install the agent
    oracle@WinHost /cygdrive/c/oracle/product/emagent12
    $ ls -la
    total 0
    drwx------+ 1 oracle None 0 Sep 20 09:55 .
    drwx------+ 1 WinHostAdmin None 0 Sep 19 12:31 ..
    Thanks

  • Cannot find format type named Date/Time

    Running latest Dreamweaver on Vista - I get a nasty pop-up
    window if I try to edit one of the predefined date formats -
    "Cannot find format type named Date/Time."
    I've tried deleting configuration setting to no avail. Anyone
    else experienced this problem or have any suggestions ?

    Hello
    It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
    If you need the output as a sapscript then please do the sollowing steps:
    (1) Execute transaction SM30
    (2) Enter 'Table/View' as V_T5F99OCFT
    (3) Select 'Maintain' option.
    (4) Select 'New Entries' option from the Application Too
    (5) Enter following entries:
         Logical Form Name    = HR_IN_EPF12A_99M
         Form Variant         = (Leave this field blank)
         End Date             = 31.12.9999
         Start Date           = 01.01.1990
         Form Type            = SAP Script (SSC)
         Def. Type            = (This field should be checke
         PDF Form Name        = HR_IN_EPF12A_99M
         SAP Script Form Name = HR_IN_EPF12A_99M
         Smart Form Name      = (Leave this field blank)
    (6) Save the entries
    The above example I have given you is only for the form 12A.
    You have to make entries for all the reports sapscript in this table.
    Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
    all the sapscripts you require.
    Regards
    Ramana

  • Find the VI named

    Hi
    I have a new Labview 2009 suite set up for me by IT (I am a programmer new at Labview) and I have been given a Labview program (also in 2009) to modify for a project.
    Unfortunately, the program keeps asking me to 'Find the VI Named "....vi"'.  I have searched my PC and the other guy's directory (he is out of contact) and cannot find any of the .vi files requested.
    So far I can only guess that:
    1/ Labview wasn't set up with all the required modules (but which ones do I ask for?  'All of them' seems a bit unprofessional)
    2/ the .vi files are inside .dlls or similar
    3/ I need a patch or update for 2009 SP1
    4/ The guy didn't give me everything (ie it's on his USB key or something)
    If I hit 'ignore' for all the requests, the block diagram comes up with some greyed boxes with question marks in them.  I have googled this question but I must be the only one too stupid to work this out myself...
    Is there a master list of the NI .vi files so I can say something like 'I need the 'NI-Borg Assimilator' module', which contains the .vi I need?
    Examples of .vi needed:
    "kcm fund distort.vi"
    "label to port bit number.vi"
    "load select to port bits.vi"
    "ULx Write (Digital 1D U8 NChan 1Samp).vi"
    "ULx Write.vi"
    "ULx Stop Task.vi"
    "ULx Create Channel (D0-Digital Output).vi"
    There are others, but hopefully this will twig for someone...
    Thanks
    Brendon

    I don't think you are missing any LabVIEW modules.  But you might be missing some third party drivers.
    Any chance you are using a Measurement Computing DAQ device?
    The ones starting with UL... sound like ones in the MCC Universal Library.  You can dowload and intall their driver from here http://www.mccdaq.com/software.aspx.
    KCM fund distort sounds rather odd.  I have no clue as to what that is supposed to mean.
    The label and load might be a part of the MCC library, but I'm not sure.
    Start by downloading and installing the MCC Universal Library, then try again.

  • Help: why I cannot find the weblogic.mycluster.properties file

    When I first config the cluster. While Setting up the weblogic.properties
              Files, Open and read the cluster properties file (installed by default as
              weblogic/mycluster). Any properties set in the cluster properties file will
              override the same properties that were set from the global properties file.
              But I cannot find this file, Also I copy the weblogic.properties to
              weblogic.mycluster.properties,Also,I cannot find the
              weblogic.cluster.enable=true,etc.
              thanks
              

    It is required to put it in command line.
              Cheers - Wei
              Atish Ray <[email protected]> wrote in message
              news:[email protected]...
              > What happens if I set this property thru the properties file ? It still
              > works. Is there a known problem on this ?
              >
              >
              >
              > Wei Guan wrote in message <[email protected]>...
              > >Yes, the default cluster name is mycluster.
              > >
              > >Create an directory named 'mycluster' under your weblogic home, copy
              > >weblogic.properties to mycluster/weblogic.properties will do the trick.
              > >
              > >weblogic.cluster.enable=true has to be set via command-line. That is, add
              > >'-Dweblogic.cluster.enable=true' in your startup script.
              > >
              > >--
              > >Cheers - Wei
              > >
              > >
              > >
              > >hhb <[email protected]> wrote in message
              > >news:[email protected]...
              > >> When I first config the cluster. While Setting up the
              weblogic.properties
              > >> Files, Open and read the cluster properties file (installed by default
              as
              > >> weblogic/mycluster). Any properties set in the cluster properties file
              > >will
              > >> override the same properties that were set from the global properties
              > >file.
              > >> But I cannot find this file, Also I copy the weblogic.properties to
              > >> weblogic.mycluster.properties,Also,I cannot find the
              > >> weblogic.cluster.enable=true,etc.
              > >>
              > >> thanks
              > >>
              > >>
              > >>
              > >
              > >
              >
              >
              

  • E63 cannot find the bluetooth icon.

    Hi all,  this will be something stupid (yeh I know). I am trying to pair up my bluetooth headset with the E63 but cannot find the bluetooth icon anywher. I have found the one in connectivity but this has no options just states that I have done the usual switch on and naming of the phone. I have benn trying fo the last 4 hours, anyone please help......

    just try as follow as below
    Bring your bluetooth headset in pairing mode (different bluetooth different ways ex long press of power on key the light starts blinking very quickly)
    connectivity>bluetooth> scroll right and select pair new device
    This will search your bluetooth headset u just select BT Headset and password will be asked just '0000".
    and oolllaaaa ur done.
    regards

  • In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

    in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

    Hi Bruce and fruhulda,
    ok, I found the keyboard viewer, it only shows the traditional symbol 'return'.  something like a sideway u-turn continued with the arrow under.  This is the Canadian or US keyboard. 
    btw thanks for your suggestion.

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

    I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file.  I have run a number of searches and  cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
    Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps.  The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members.  I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
    Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

    My apologies Eadeszoo I believe our support agents are unavailable on January 1.
    Are you able to copy the contents of the DVD to your computer?  Are you receiving any particular error messages when you are trying to install?  Finally which operating system are you using?

Maybe you are looking for