Cannot find result area for a query

I have 4 queries in a workbook, all on separate sheets. I usually refresh all queries at once from a fifth worksheet. I started getting this error when the first query is refreshed that says "Cannot find the result area for a query - probably all its cells were deleted. Please define a new location for the result area!"
If I refresh each query individually, I do not get this error. But I want to refresh all at once, which had always worked in the past. If I play along with the error and try to select a cell to put the results, it still does not solve the issue. Any ideas why suddenlt started receiving this error?
Thanks.

Try going through all the tabs on the workbook and ensure that you place the cursor within one of the cells of the query, then resave, close and open. See if the message still occurs.
I know it sounds silly but we have had this issue in the past with multi tabbed workbooks and this, simple as it sounds has been the cause.

Similar Messages

[SOLVED] internal error Cannot find suitable emulator for x86_64

Hi,
After a reboot due to unrelated issues, virt-manager is not showing any of the VMs I had configured via qemu:
I checked connection properties, and everything else is showing up correctly, like the networks and storage. I tried to create new VMs out of existing storage and got this message:
Googling it suggested this happens when KVM module is not loaded. I modprobed kvm, kvm_intel and still got same result.
Systemd gave me the following:
% systemctl status libvirtd
libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled)
Active: active (running) since Sat 2013-06-08 08:55:19 IST; 29min ago
Main PID: 1499 (libvirtd)
CGroup: name=systemd:/system/libvirtd.service
├─ 834 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
├─ 863 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/nat_static.conf
├─ 881 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/closed_dhcp.conf
└─1499 /usr/bin/libvirtd -p /var/run/libvirtd.pid
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Googling that seems to indicate that this happens when virtualization is disabled by BIOS. But cpuinfo tells me that vm is supported:
% grep vmx /proc/cpuinfo | uniq -c
8 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
Can anyone help me? Has anyone else faced a similar problem?
Here are some version info:
local/libvirt 1.0.6-1
API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)
local/qemu 1.4.2-1
A generic and open source processor emulator which achieves a good emulation speed by using dynamic translation.
Of which, qemu got updated just today. I will try rolling back to older version and post and update.
Ninja edit: Looks to be qemu. Just running qemu gives me this error:
% qemu-system-x86_64
qemu-system-x86_64: error while loading shared libraries: libiscsi.so.1: cannot open shared object file: No such file or directory
EDIT: The resolution was
pacman -S libiscsi libaio
systemctl restart libvirtd
EDIT2: Made subject line better searchable
Last edited by railmaniac (2013-06-08 04:19:24)

HI,
First of all thanks a lot for this post. I am facing the same issue since yest.
After reboot, my VMs gone missing and even virt-manager was not working (as shown in the screenshots which you have pasted in your post).
Now after trying out the workout which you had mentioned, I am able to get the virt-manager working.
But I am not sure if I can get back my missing VMs .
I am new to linux. Kindly guide me on how I can get back those VMs.
[root@skoduri lib64]# ls /etc/libvirt/qemu/
networks rhel6-vm2.xml rhel6.xml
[root@skoduri lib64]#
[root@skoduri lib64]# ls /etc/libvirt/storage/
autostart default.xml storage_1.xml
[root@skoduri lib64]#
[root@skoduri lib64]#
Thanks,
Soumya

I cannot find the icon for office:mac 08 word on my doc, where did it go?

I cannot find the icon for Office: mac 08 word on my doc. I downloaded the whole Office: mac 2008 Home & Student Edition about a year ago and just recently the word icon disappeared. The other Office icons are still visible and i am able to use them but i cannot find the word application anywhere.

Have you used spotlight search? Typed "word" and the application doesn't appear? If it doesn't then it probably isn't around anymore.... so hit command + space ... and type "word"... what happens?

Cannot find PDL type for output device LOCL in J1INCRT

Dear all
I am getting error in PRD system. When I am running J1INCRT (Customizing for Certificate Printing) the error
cannot find PDL type for output device LOCL
we are using ECC6 ,oracle 10g and windows 2003
Kernel release    701
Please suggest how to solve
Regards,
Kumar

Hello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
     Logical Form Name    = HR_IN_EPF12A_99M
     Form Variant         = (Leave this field blank)
     End Date             = 31.12.9999
     Start Date           = 01.01.1990
     Form Type            = SAP Script (SSC)
     Def. Type            = (This field should be checke
     PDF Form Name        = HR_IN_EPF12A_99M
     SAP Script Form Name = HR_IN_EPF12A_99M
     Smart Form Name      = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana

I cannot find my receipt for my ipod how can i prove it isnt a year old

I cannot find my receipt for my ipod and its under a year old how can i prove this

Hi cantfindanything,
I am gathering you are trying to get an iPod repaired by Apple.
In the US for iPod Touch Generation 5:
Every iPod comes with a one-year limited warranty and 90 days of complimentary telephone technical support.
If you are trying to get a replacement or repair job, Apple will just need your Serial Number, found on either the back of your iPod Touch or in: Settings, General, About, Serial Number.
When Apple receives this number, their database will be able to show up your information including device purchase and activation.
To get a repair job/replacement, it is best to talk to Apple on the phone or go to your nearest Apple store to find out possible resolutions.
To contact Apple call:
1-800-MY-APPLE
You can also take the iPod into your closest Apple Store and give them your serial number and they will be able to help you: http://www.apple.com/retail/storelist/
Many Thanks for your question and Happy New Year!
iBenjamin Crowley

Satellite L500-1XD - cannot find an update for PC health monitor

This TBS advises updates to PC health monitor and HDD/SDD alert.
HDD/SDD alert has a published update in the relevant downloads section but I cannot find an update for PC health monitor.
Any one got any bright ideas ?
Otherwise this seems quite a balanced system.

Hi Paolo30,
Thanks for your contribution. I agree with your model designation
I would like to download ver 1.5.6.0 but it does not seem to be listed on the download list (Two and a quarter pages long) for the L500-1XD on the Toshiba-Europe website. I am using I.E.8
Where are you seeing this listed ? Could you give me a URL please ?
It is an important update as it resolves a conflict between video streaming from HD and SMART HD messages as described in the TSB.
The only upgrade that is tagged as 1.5.6.0 is the Bullitin Board and this does not sound like the correct type of application. There was obviously a major update on 21/6/2010 there are 30 odd updates with that date.
Kindest Regards

Cannot find a report for SQL Server monitoring

We installed a SCOM 2012 environment recently and imported the SQL Server Management packs successfully. SQL Servers are being monitored.
However, in the reporting section, i cannot find a group for SQL Server Reporting. All other show up ( Active Directory, Appication Monitoring, Web monitoring, etc) Just none for the SQL Reporting.
Please help

Hi,
I assume that you miss some SQL management packs, would you please re-download the management pack here and import it:
https://www.microsoft.com/en-hk/download/details.aspx?id=10631
After successful importing, you should see it under reporting workspace:
If you still cannot see it, please check operation manager event logs for more information to help to troubleshoot this issue.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'name'. Make sure it exists and that its name is spelled correctly.

When I run the code below I get the following error:"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'False'. Make sure it exists and that its name is spelled correctly. Note that I do not call
anything by the name of "false" anywhere in this code.
The subject code (the underscored line of code is highlighted in the debugger when the error occurs):
Option Compare Database
Private Sub JobAssign_Click()
MatLotListAvail_openform
End Sub
Function MatLotListAvail_openform()
Dim dbsAPIShopManager2010 As DAO.Database
Dim rstMaterialLotJobJoint As DAO.Recordset
Dim strSQL As String
Set dbsAPIShopManager2010 = CurrentDb
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID" = "tempvars!JobID" And "MatLotID" = "tempvars!MatLotID"
Set rstMaterialLotJobJoint = dbsAPIShopManager2010.OpenRecordset(strSQL, dbOpenDynaset)
If rstMaterialLotJobJoint.EOF Then
DoCmd.OpenForm "JobAssignMatConf", acNormal, "", "", acEdit, acNormal
Forms!JobAssignMatConf!PartapiIDVH = TempVars!PartapiID
Forms!JobAssignMatConf!JobapiIDVH = TempVars!JobapiID
Forms!JobAssignMatConf!JobIDVH = TempVars!JobID
Forms!JobAssignMatConf!MaterialLotIDVH = TempVars!MatLotID
Forms!JobAssignMatConf!Desc = TempVars!MatDesc
Forms!JobAssignMatConf!recdate = TempVars!recdate
DoCmd.Close acForm, "MaterialLotListAvailable"
Else: MsgBox "This material lot has already been assigned to this job."
DoCmd.Close acForm, "MaterialLotListAvailable"
End If
End Function

I think the SQL statement should be
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID=" & _
tempvars!JobID & " AND MatLotID=" & tempvars!MatLotID
This assumes thatJobID and MatLotID are number fields.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Cannot find the classfile for javax.mail.internet.AddressException

Hi,
Scenario is SAPCRM 7.0/ECC.
We are trying to extend the EmailAction class.
The error bieng faced is
Cannot find the classfile for javax.mail.internet.AddressException.
We have added crm/isa/lwc to the used Dcs but still this error is there.
Mail.jar is also present in the system.
We are not able to make out what exactly the issue is.
Please help.
Thanks,
Rohit

Hi Rohit,
Did you ever find the solution to this problem? We're encountering the same error message.
Thanks!
Joe

Q30: Cannot find sales order for a committed stock item

I have a few item numbers which show committed stock in item master data/stock but I cannot find an open sales order or even with an open line on a closed sales order. I have tried various query reports without success.
Does anyone have a key to unlock this problem?
Thanks,
Robin

Hi,
Sorry but I am pretty new to SAP and on a learning curve so no idea what note 999124 is or even where/how I would use it.
Can you explain further please?
Robin
Lakshmipathi
Posts: 17,513
Registered: 8/9/07
Forum Points: 34,462
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
   Re: Q30: Cannot find sales order for a committed stock item
Posted: Jan 12, 2011 3:18 PM    in response to: Robin Bellion           Reply
Check Note 999124 - Incorrect committed\On order quantity when changing orders
thanks
G. Lakshmipathi

I have to unistall my adobe cs5 [s/n removed by moderator], and a trial for Photoshop cc and I cannot find the download for those. Can you help me?

I have to unistall my adobe cs5 serial number [], and a trial for Photoshop cc and I cannot find the download for those. Can you help me?

CS5 product downloads are available thru the following page:
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
Photoshop CC trial download is available thru its product page:
Download Photoshop CC by joining Creative Cloud today | Adobe Photoshop CC

Cannot find CFML template for custom tag

Why am I getting this error when my code looks like this?
Cannot find CFML template for custom tag UPSPrice.
ColdFusion attempted looking in the tree of installed custom tags but did not find a custom tag with this name. If you are using per-applica
<Cfif NOT form.shipzip IS "">
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.shipzip#" WEIGHT="#getshipweight.totwei#">
<cfelse>
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.zip#" WEIGHT="#getshipweight.totwei#">
</cfif>

UPSPrice.cfm file:


<CFSET proceed = "Yes">
<CFSET error_message = "">

<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.service")>
<CFSET product = ATTRIBUTES.service>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "SERVICE must be specified!">
</CFIF>
</CFIF>

<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.to")>
<CFSET destPostal = ATTRIBUTES.to>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "TO postal code must be specified!">
</CFIF>
</CFIF>

<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.from")>
<CFSET origPostal = ATTRIBUTES.from>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "FROM postal code must be specified!">
</CFIF>
</CFIF>

<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.weight")>
<CFSET weight = ATTRIBUTES.weight>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "WEIGHT postal code must be specified!">
</CFIF>
</CFIF>

<CFIF proceed>

<CFSET destCountry = "US">
<CFIF IsDefined("ATTRIBUTES.tocountry")>
<CFSET destCountry = ATTRIBUTES.tocountry>
</CFIF>

<CFSET oversized = "0">
<CFIF IsDefined("ATTRIBUTES.oversized")>
<CFIF ATTRIBUTES.oversized>
   <CFSET oversized = "1">
</CFIF>
</CFIF>

<CFSET cod = "0">
<CFIF IsDefined("ATTRIBUTES.cod")>
<CFIF ATTRIBUTES.cod>
   <CFSET cod = "1">
</CFIF>
</CFIF>

<CFSET hazard = "0">
<CFIF IsDefined("ATTRIBUTES.hazard")>
<CFIF ATTRIBUTES.hazard>
   <CFSET hazard = "1">
</CFIF>
</CFIF>

<CFSET handling = "0">
<CFIF IsDefined("ATTRIBUTES.handling")>
<CFIF ATTRIBUTES.handling>
   <CFSET handling = "1">
</CFIF>
</CFIF>

<CFSET calltag = "0">
<CFIF IsDefined("ATTRIBUTES.calltag")>
<CFIF ATTRIBUTES.calltag IS "BASIC">
   <CFSET calltag = "1">
<CFELSEIF ATTRIBUTES.calltag IS "ELECTRONIC">
   <CFSET calltag = "2">
</CFIF>
</CFIF>

<CFSET saturdaydelivery = "0">
<CFIF IsDefined("ATTRIBUTES.satdeliv")>
<CFIF ATTRIBUTES.satdeliv>
   <CFSET saturdaydelivery = "1">
</CFIF>
</CFIF>

<CFSET saturdaypickup = "0">
<CFIF IsDefined("ATTRIBUTES.satpickup")>
<CFIF ATTRIBUTES.satpickup>
   <CFSET saturdaypickup = "1">
</CFIF>
</CFIF>

<CFSET response = "0">
<CFIF IsDefined("ATTRIBUTES.response")>
<CFIF ATTRIBUTES.response IS "BASIC">
   <CFSET response = "1">
<CFELSEIF ATTRIBUTES.response IS "SIGNATURE">
   <CFSET response = "2">
<CFELSEIF ATTRIBUTES.response IS "ALTERNATE">
   <CFSET response = "3">
<CFELSEIF ATTRIBUTES.response IS "ALL">
   <CFSET response = "4">
</CFIF>
</CFIF>

<CFSET vcd = "0">
<CFIF IsDefined("ATTRIBUTES.verbconf")>
<CFIF ATTRIBUTES.verbconf>
   <CFSET vcd = "1">
</CFIF>
</CFIF>

<CFSET firstshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot1")>
<CFIF ATTRIBUTES.shipnot1 IS "DOMESTIC">
   <CFSET firstshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot1 IS "INTERNATIONAL">
   <CFSET firstshipnotify = "2">
</CFIF>
</CFIF>

<CFSET secondshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot2")>
<CFIF ATTRIBUTES.shipnot2 IS "DOMESTIC">
   <CFSET secondshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot2 IS "INTERNATIONAL">
   <CFSET secondshipnotify = "2">
</CFIF>
</CFIF>
</CFIF> 

<CFIF proceed>
<CFHTTP
URL="http://www.ups.com/using/services/rave/qcostcgi.cgi"
METHOD="POST"
>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="accept_UPS_license_agreement" VALUE="yes">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="10_action" VALUE="3">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="13_product" VALUE="#product#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="15_origPostal" VALUE="#origPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="19_destPostal" VALUE="#destPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="22_destCountry" VALUE="#destCountry#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="23_weight" VALUE="#weight#">
<CFIF IsDefined("ATTRIBUTES.value")><CFHTTPPARAM TYPE="FORMFIELD" NAME="24_value" VALUE="#ATTRIBUTES.value#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.length")><CFHTTPPARAM TYPE="FORMFIELD" NAME="25_length" VALUE="#ATTRIBUTES.length#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.width")><CFHTTPPARAM TYPE="FORMFIELD" NAME="26_width" VALUE="#ATTRIBUTES.width#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.height")><CFHTTPPARAM TYPE="FORMFIELD" NAME="27_height" VALUE="#ATTRIBUTES.height#"></CFIF>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="29_oversized" VALUE="#oversized#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="30_cod" VALUE="#cod#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="33_hazard" VALUE="#hazard#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="34_handling" VALUE="#handling#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="35_calltag" VALUE="#calltag#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="37_saturdaydelivery" VALUE="#saturdaydelivery#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="38_saturdaypickup" VALUE="#saturdaypickup#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="39_response" VALUE="#response#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="43_vcd" VALUE="#vcd#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="44_firstshipnotify" VALUE="#firstshipnotify#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="45_secondshipnotify" VALUE="#firstshipnotify#">
</CFHTTP>

<CFIF ListFirst(CFHTTP.FileContent, "%") IS "UPSOnLine3">

<CFSET CALLER.UPS_Success = "Yes">
<CFSET CALLER.UPS_Service = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_FromPostal = ListGetAt(CFHTTP.FileContent, 3, "%")>
<CFSET CALLER.UPS_FromCountry = ListGetAt(CFHTTP.FileContent, 4, "%")>
<CFSET CALLER.UPS_ToPostal = ListGetAt(CFHTTP.FileContent, 5, "%")>
<CFSET CALLER.UPS_ToCountry = ListGetAt(CFHTTP.FileContent, 6, "%")>
<CFSET CALLER.UPS_ToZone = ListGetAt(CFHTTP.FileContent, 7, "%")>
<CFSET CALLER.UPS_Weight = ListGetAt(CFHTTP.FileContent, 8, "%")>
<CFSET CALLER.UPS_BaseCharge = ListGetAt(CFHTTP.FileContent, 9, "%")>
<CFSET CALLER.UPS_OptionalCharge = ListGetAt(CFHTTP.FileContent, 10, "%")>
<CFSET CALLER.UPS_Charge = ListGetAt(CFHTTP.FileContent, 11, "%")>
<CFSET CALLER.UPS_GuaranteedBy = ListGetAt(CFHTTP.FileContent, 12, "%")>
<CFSET CALLER.UPS_Error = "">
<CFSET CALLER.UPS_ErrorCode = "">
<CFELSE>

<CFSET CALLER.UPS_Success = "No">
<CFSET CALLER.UPS_Service = "">
<CFSET CALLER.UPS_FromPostal = "">
<CFSET CALLER.UPS_FromCountry = "">
<CFSET CALLER.UPS_ToPostal = "">
<CFSET CALLER.UPS_ToCountry = "">
<CFSET CALLER.UPS_ToZone = "">
<CFSET CALLER.UPS_Weight = "">
<CFSET CALLER.UPS_BaseCharge = "">
<CFSET CALLER.UPS_OptionalCharge = "">
<CFSET CALLER.UPS_Charge = "">
<CFSET CALLER.UPS_GuaranteedBy = "">
<CFSET CALLER.UPS_Error = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_ErrorCode = ListGetAt(CFHTTP.FileContent, 3, "%")>
</CFIF>
<CFELSE>

<CFOUTPUT><H1>Error: #error_message#</H1></CFOUTPUT>
<CFABORT>
</CFIF>

Cannot find CFML template for custom tag SELECTDATE

Hi,
I am not a ColdFusion developer and just moved a site from one server to another. That site is developed by someone else not me and I just moved the site to ColdFusion server. Site is working fine except a few pages where I am getting this error:
Cannot find CFML template for custom tag SELECTDATE
I read a little bit about custom tags. These are files that needs to be placed in a certain folder from where ColdFusion reads them.
So that means I will need to ask the developer who developed this site to provide me with this custom tag file, which when I will place in appropriate folder, this page will start working? And without that file I cannot do anything about it?
Thanks

As Dan says, they're just CFM files. Usually one can identify them as follows:
* they're in the same directory as a file calling <cf_somefilename[...]>, wherein there is a somefilename.cfm is the name of the file
* they're in one of the directories set as custom tag directories (in CFAdmin, or Application.cfc)
* they have references to "thistag" or the attributes scope in them (although the latter can produce false positives on Fusebox sites)
By the sounds of it, your issue is - like I said before - you haven't got your custom tag dirs set up in CFAdmin (or in Application.cfc, which I didn't mention before). Investigate that.
Adam

My lap top with Adobe Premiere Elements 8 had a hard drive crash and I cannot find the download for it?

My laptops hard drive crashed and I lost this program. I still have the serial number but cannot find the download for it.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Error "Document splitting cannot find a distribution for currency type 00"

Hi All,
We are using ECC 6.0 version nAfter uploading a MT940 bank statement thru FF_5 we usually go to FEBA and check if there are any unposted items and we post them manually. And while doing so I am getting an error as "document splitting cannot find a distribution for currency type 00". But when i simulated the same scenario in my QA system the document is getting posting of without any issue. If any one has come across this situation, let me know how to over come the same.
Thanks and Regards
Srihari Bolla

Hi
Check and implement notes - 888389, 1000955, 1268620, 925221
Cheers!
Zub

Cannot find result area for a query

Similar Messages

Maybe you are looking for