Cannot get DAC Assistant Wizard to pop up

I am trying to interface my PC running LabView 7.1 with a SC-2345 DAQ. I cannon get the DAQ Assistant to pop up. It works on my desktop PC, but not on the laptop that the DAQ is connected to. I inherited the project, so I am not sure what changes to the settings/perferences were made to LabView.
thanks.

Do users need to be an administrator/power user to run the DAQ
Assistant Wizard?  Or can permissions be changed on the driver
only to allow regular users to run this wizard?
I'm having problems w/my users not being able to run this wizard unless they are at least members of the Power Users.
Thanks,
Tim

Similar Messages

  • I cannot get backup assistant to work on my Cosmos 2. It keeps saying that I entered an invalid pin (but I've been entering the pin that it tells me to enter). I'm in the process of transferring phones.

    I cannot get backup assistant to work on my Cosmos 2. It keeps saying that I entered an invalid pin (but I've been entering the pin that it tells me to enter). I'm in the process of transferring phones.

    JWensley,
    Sorry to hear about the trouble with the PIN! Let's get you past that so you can complete the transfer process. Are you receiving that PIN by pressing the # key as outlined here: http://vz.to/1zINyY8 . Is this the initial backup on the old device?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • HT2518 Cannot get Migration Assistant to load on PC - keeps saying "repair"

    In trying to set up a migration from PC to Mac I cannot get Migration Assistant to load on the PC (XP).  It keeps saying I have to repair the MA and try again.  I have tried everything I can think of: clear caches, delete and reload MA, shut down virus software and firewall, reboot, etc.  Any ideas or direction would be appreciated.  Thank you.

    Have you looked at these directions?
    http://support.apple.com/en-us/HT4796
    Ciao.

  • How can I cancel my adobe subscription? I am in the trial period and cannot get any assistance online. This is really annoying

    How can I cancel my adobe subscription? I am in the trial period and cannot get any assistance online. This is really annoying.

    Hi tokhouse,
    Please refer to the help document below:
    Cancel your membership or subscription | Creative Cloud
    In case of any issues, please contact the support:
    Contact Customer Care
    Regards,
    Sheena

  • Cannot get migration assistant working from PowerBook to MacBook Air - what am I doing wrong?

    Hello out there,
    I am proud possessor of a new MacBook Air with Mac OS X 10.7. Up to now, I used a PowerBook with Mac OX X 10.4.11. Although the two macs - old and new one - are connected via the same WLAN network, I cannot get the migration assistant going. The two cannot find each other, although they are only 5 centimetres apart....what am I doing wrong? Do I need an update for the PowerBook? And if yes, which one? Or should I give up?
    Thank you so much for your help, greetings from sunny Munich, Evelyn

    Have a read here http://support.apple.com/kb/HT4818.
    Maybe you need this update for 10.4.11 http://support.apple.com/kb/HT3174
    You should also read this Basic Guide https://discussions.apple.com/docs/DOC-2295 from one of local Gurus.
    Stefan

  • Cannot get mozilla uninstall wizard

    cannot uninstall firefox, cannot get to firefox uninstall wizard.version3.6.3, Vista
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

    cannot uninstall firefox, cannot get to firefox uninstall wizard.version3.6.3, Vista
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

  • Cannot get migration assistant to work on my mac pro

    I cannot get migration to work from my sony vaio to my mac pro, the pc shows up on my mac, but it keeps saying it looking for other sources, what gives ?

    Have you looked at these directions?
    http://support.apple.com/en-us/HT4796
    Ciao.

  • Cannot get Download Assistant to stop, Acrobat did not load, need to try again

    For 15 hours the Download Assistant has been trying to load Acrobat XI Pro Mac.  Under the status bar is the message "Extracting...this might take a while".  Also, a warning message appeared during download stating, "The following disk images couldn't be opened"; (Image) AcrobatPro_11_Web_W, (Reason) error -4960.  How do I get Download assistant to quit so I can reload the Acrobat download?

    Use this:
    Direct Download Links for Adobe Software
    And use a decent browser...
    Mylenium

  • Cannot get past strtup wizard...

    I have ichat 3.0 and haven't been able to get past the startup yet....
    I have tried a few of the common responses to this:
    1. my address-book 'me' data is the same as the data entered into the fields of wizard.
    2. no NAT/Firewall issues to speak of... sufficient bandwidth (other chat apps work fine)
    3. Regular disk utility permission repair
    4. I used app-zapper to completely remove ichatav twice and reinstalled twice
    5. I regularly dump the existing .plist files associated with ichat before I vainly attempt to reinstall
    6. I've even created a new user and tried to install ichat to no avail.
    7. finally, I've gone through the postings pretty thoroughly and haven't found the answer yet.
    Thanks in advance for any help. Sorry for the redundancy of the post.
    dual 2.5 G5(ppc)_2.5gb   Mac OS X (10.4.8)   isight

    Tony-
    I had installed the combo update (as opposed to the delta?) when I went from 10.4.7 to 10.4.8. However, I believe that was after I had erased IChat AV. Then I reinstalled IChat from my tiger upgrade dvd. I'm currently re-dwnlding the 10.4.8 combo... should I attempt to reinstall over the existing update?
    Thanks for the assistance.

  • Cannot get emails after changing to pop account

    Telstra, my internet provider, required me to change my email settings to a pop account. I had no choice in this matter.
    I am told that this will gradually happen to all users over the next 12 months....!
    BUT..... now  my ipad will not receive or send emails! 
    I copied over new settings from laptop to ipad as advised.  This did not work. 
    I then re--synced ipad to laptop....this did not work. I have since found 'online' that there is a problem with ipads
    and 'pop' accounts
    Further contact with Telstra informed me that  they are not responsible for other devices and
    I will have to pay to get this problem  fixed.  This is a $99 set rate!
    Can anyone help me to reconfigure my ipad to receive and send emails?

    Did you already try the Mail assistant for iPad?
    On thing to keep in mind:
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    What to ask if you're having issues sending, receiving, or configuring Mail
    iOS: Unable to send or receive Mail
    I have no problems using my POP Mail account on my iPad.
    If you have copied the settings from your computer, make sure that all passwords have been added again by you, they might have been removed for security reasons during copy process.
    I started from the scratch by adding a new account, to be sure all settings were correct.
    Some accounts don't work using SSL, in that case set it up without using SSL
    Message was edited by: Ingo2711

  • Plug in fails to activate and window suggests validation code priated. Repurchased software but cannot get plug in activation. Pop up suggests validation code still not functional but I am not sure.

    I tried to download my old lightroom and for some reason it no longer registered, which I found strange. So I went to the local dealer and he put in Adobe 5, which I thought was a good deed. Yet, as I now try to create a webpage with lightroom photos, I find they do not upload properly--if at all. Upon further research, it turns out that I need some sort of plug in.
    So OK I get the plug in and attempt to attach it's location to the program. The program pops up a box which suggested "commonly used pirated program". Therefore I repurchase this program and download it.
    I try again and it still pops up--pirated version. This time I know it is not since I repurchased the lightroom product yesterday.
    How do I get this plugin to operated? It is crucial to uploading this program to Google.
    Thanks.
    Sam C

    And where did you buy Lightroom 5 from?
    Are you using the same serial number you bought, here are instructions on how to find it depending on the method you used to buy it: Find your serial number quickly

  • No matter what I do I cannot get the uninstall wizard to come up. How do I uninstall Mozilla Firefox?

    Program uninstall doesn't work, helper.exe doesn't bring up the uninstall wizard. I'm tired of the problems from it even though we don't have it as our default browser. I just want it gone! I've tried the suggestions in the chat forum to no avail.

    #close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    Try to start Windows Explorer as administrator by right-clicking its icon. Go to those folders and right-click them. Click Properties and under "Permissions" make sure all read/write permissions are checked. If Windows doesn't allow to enable them, start Windows in Safe Mode.
    Starting Windows in Safe Mode may prevent your computer from running any malware or tool that may be blocking some administration actions such as removing a folder, modifying a system file, uninstalling a program, etc.
    To start Windows in Safe Mode under Windows XP, Vista or 7, press F8 repeatedly during reboot until a menu appears, and choose Safe Mode. Under Windows 8 you should start (Windows+R) msconfig, go to Boot and mark "Start on safe mode". Reboot your computer and Windows 8 will run safe mode.
    Once on Safe Mode try to perform the action you were trying to do and check if it now works.
    You should delete the following folders if present:
    C:\Program Files\Mozilla Firefox
    C:\ProgramData\Mozilla Firefox
    C:\ProgramData\Mozilla
    C:\Users\username\AppData\Local\Mozilla
    C:\Users\username\AppData\Local\Mozilla Firefox
    C:\Users\username\AppData\Roaming\Mozilla
    C:\Users\username\AppData\Roaming\Mozilla Firefox
    Also cleanup your temporary and rubbish files with Windows built-in hard disk cleaner or alternatives such as CCleaner or TuneUP utilities.
    *https://support.mozilla.org/en-US/questions/937103

  • Cannot get Win8 Pro computer run the Connect a Computer to the Server Wizard (computerconnector) of Essentials 2012

    I've spent 1/2 the day trying to troubleshoot this problem and finally give up.
    My client has a Windows Server 2012 Essentials server (with all updates installed - no errors in error logs nor SFC /SCANNOW).  Purchased a new Windows 8 Pro computer, which we installed all the updates from Windows Updates and are now trying to join
    the domain using the "Microsoft way" (i.e.:  http://[servername]/connect).
    The site comes up and it prompts us to download the software and run... so far so good, but when we get to the screen where it asks, "Type your new network user name and password" - the next screen after that we get the error, "Cannot connect
    this computer to the network...". 
    I've been looking at cases all day long through Microsoft and Google - all pointing to problems with the SSL on the server - that's not the problem here (as other workstations have, in the past, successfully connected and we verified today that the local
    server certificate is what is the default, as it should be).
    I've tried just about everything I can think of and cannot get this silly wizard to work (why Microsoft, WHY!??!?!).  Yet, I can join this domain just fine doing it through normal means.  I've even tried joining the domain this way, and tried installing
    the software afterwards (as the Essentials Console won't reflect the new workstation, thus it won't add it to group policies etc... though yes, I could manually do that and have - but we'd still like to get it to show up in the console).  I even
    tried the trick noted in a KB talking about running the connect software without joining the domain (registry key that gets added) - that didn't work either.
    I'm out of ideas - and at this point had to get the client online and working today - so we joined it manually, configured it and left it.  But I would like to get this fixed the "proper" way.  Help?
    I do have the clientdeploy.log file - which only points out an internal error, but I'm unsure how to enable the improved logging it suggests (I'll gladly post the logs if someone tells me how - I'll skip posting the log file here for now):
    [1544] 140204.203620.0794: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
    BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.FaultException: The server was unable to process the request due to an internal error.  For more
    information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on
    tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
    Suggestions?  Thoughts?  I hope Essentials 2012 R2 improves this - as I've had this error for other various reasons with other clients (and spent 1/2 days troubleshooting to clear those up).  Essentials Connect, IMHO, needs a re-write - as
    it's been nothing but a hassle... miss the SBS connect.

    Hi slemay,
    Before going further, please uninstall the Connector software from Control panel. Then connect again, will
    the same issue persists? Would you please use another client to connect with the Server 2012 Essentials by using this way? Then monitor the result. Please make sure the computer has a physical connection to the local network.
    Please refer to the TechNet article (Here)
    and troubleshoot, then check if can help you to solve it.
    In addition, please refer to the following articles and enable
    WCF tracing to go further. Please check if you can find some clues.
    How to enable WCF tracing
    http://blogs.msdn.com/b/madhuponduru/archive/2006/05/18/601458.aspx
    [wcf: solution] The server was unable to process the request due to an internal error.
    http://blog.bitlinkit.com/wcf-solution-the-server-was-unable-to-process-the-request-due-to-an-internal-error/
    Hope this helps.
    Best regards,
    Justin Gu

  • Cannot get smtp online, all info for email provider correct

    I cannot get SMTP online on a POP email accout. All settings confirmed with email provider....any ideas?

    Hello,
    Who is your eMail provider, the part after the @ sign?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.

  • I cannot get my pop account e-mail to work

    I cannot get my pop account to work at all on my I-phone 4s.
    I have an I-Pod touch, with the same settings this works fine?

    Hope you a having a great day, steviev23; Welcome to the forum.
    I am reaching out to probe if you still experience this issue. If you are, I will do my best to assist you.
    This article will help on "The printer is not found" error GO HERE 
    If you are not experiencing this issue any longer you may disregard this post, although I will appreciate if you can take I little bit of your time and let me know.
    Let me know if I can help in any way; 
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Maybe you are looking for