Cannot get past admin console login with Apache plug-in

I am running Weblogic 8.1 Express (evaluation download) on a RedHat 7.3 host with
Apache 1.3.27. There is a single admin server and no managed servers. I am able
to connect to and use an application (e.g. http://ashish/weblogic/survey_web)
with no problems, but receive a 503 error when I connect to the console (http://ashish/console)
and submit my login information. The relevant section of httpd.conf is:
<VirtualHost default:80>
<IfModule mod_weblogic.c>
WebLogicHost ashish
WebLogicPort 7001
ErrorPage /weblogic_error.html
MatchExpression /console
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
</IfModule>
</VirtualHost>

Little strange. But just want to be clear - you tried http command and with valid username/password you are not able to run "ping" http command - right?  Can you juct check your Admin Server configuration and restart Admin server once and see if it helps. Also do you see any errors in logs - say master, admin logs?

Similar Messages

  • AMS 5.0 on Amazon: Fresh install can't get past admin console login

    Hi there,
    I created a fresh Adobe Media Server 5.0 instance on Amazon EC2 AWS and followed all instructions in this document:
    http://help.adobe.com/en_US/flashmediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2926 bcf-7ff4.html
    - I added the admin user to ams.ini
    - created a user password using ./amsadmin -console -user <username>
    - opened all necesarry ports.
    - tested port 1111 using telnet successfully
    However I still can't login.
    I did the ping test using:
    <ipaddress>:1111/admin/ping?auser=username&apswd=password
    when using an invalid username/password this returns:
    <result><level>error</level><code>NetConnection.Connect.Rejected</code><description>Admin user requires valid username and password.</description><timestamp>Sun Nov 18 15:02:59 2012</timestamp></result>
    but with a valid username/password combination it just redirects the page endlessly until the browser stops.
    Is there anybody out there who can give me a hint?

    Little strange. But just want to be clear - you tried http command and with valid username/password you are not able to run "ping" http command - right?  Can you juct check your Admin Server configuration and restart Admin server once and see if it helps. Also do you see any errors in logs - say master, admin logs?

  • Another iBook cannot get past the grey screen with spinning gear

    I have read the other posts on iBooks not starting up. I too have used Onyx recently but this was to cure the problem of a freeze. Now start up cannot get past the grey screen. PRAM has been zapped and safe mode will not work. Worse, the CD drive will take CDs so cannot go back to start up disk.
    Bizarrely, a visit to the Apple Store and the iBook started no problem. System was reinstalled using archive option and various health checks apparently showed no problems. But then got back home and again start up froze at grey screen with spinning gear. I have left it on this for over 15 minutes but to no avail. I have tried to connect to another ibook using T key to get target mode. I'm not sure if I am doing this right. I have started up working iBook plugged in the firewire to both machines and then started up ailing iBook holding down T key. 2nd iBook wont start at all.
    Any suggestions?

    An Archive and Install will preserve you user settings and data. You will need a minimum of 5 GB free on the hard drive to perform an A&I; you can reduce the space required by about 1 GB by selecting the option to install language support only for the language you use (assuming you don't need multiple languages).
    However, after seeing your other post (BTW, it'll be easier to keep track if relted issues are in the same thread), you do not want to try an A&I if Disk Utility is reporting anything about 'could not be repaired'. Doing so will would ensure problems down the road, if it worked at all. It's possible for one disk problem to mask another. Whenever Disk Utility (or any other repair utility) reports making repairs, it's good practice to repeat the repair until it reports no problems found or it becomes clear it cannot repair the disk.
    DiskWarrior has an excellent track record at repairing problems that Disk Utility cannot (especially Disk Utility versions prior to OS X 10.4.2).
    If the drive cannot be repaired, you may be able to keep it by doing an erase install with the write zeros (one pass) option. That will update the hard drive firmware record of bad disk sectors to avoid using. If there are only a few bad sectors, that may let you keep using the hard drive for several more years. An erase install will do just that to your data, through. If you have access to another Mac with either a large amount of free disk space of a DVD burner, you can try using the other Mac as host and the eMac as target in FireWire target disk mode. You can run the host's copy of Disk Utility on the eMac hard drive, and hopefully be able to mount the emac HD so that you can back up the data in your Home directory.

  • How do I get access to Mobile documents admin console login with SAP HANA Cloud cockpit?

    Hi All,
    I am trying to launch SAP Mobile Documents from my trail version of SAP HANA Cloud.
    The Help link which I had followed  via link:
    https://help.hana.ondemand.com/help/frameset.htm?dc618538d97610148155d97dcd123c24.html#concept_0B49F10346C94249845EC16364FFF66D_76
    In SAP Cloud HANA Cockpit Using the link available in Authorization>Authorization Management
    I had created an user assigned to a Group, and Group has been assigned to a  Role ODP-OPERATOR,
    Next step, when I am trying to assign a token, I could not able find a token. How to get a token from here?
    My intention of creating user, group, role and token is for getting access to Mobile documents admin console.
    However I have also tried to access the mobile documents admin console via link
    https://smd-p1886950994trial.hana.ondemand.com/mcm/admin
    When I browse the above link, It shows HTTP 503 the requested service is not currently available.
    I am not sure, How to get access Mobile documents Admin page from here
    Could someone clarify on this please?
    Regards,
    Saravanan.R

    Hi,
    I have managed find an answer from this link SAP Mobile Documents on SAP HANA Cloud saying, SAP Mobile documents trial is not available in SAP HANA Cloud cockpit.
    Regards,
    Saravanan.R

  • Cannot get past login screen

    I cannot get past the login screen. I ran the disk utility to verify/repair my hard drive. The tool fixed a minor sequencing issue which resulted in a "The volume Macintosh HD appears to be ok. That did not fix the problem. Next, I tried booting in safe mode. I cannot. I'm thinking my next step is to reinstall the OS X from the Mac Utilities Suite. My fear is that it is going to erase my Hard Drive. True? Will performing this function erase my locally stored data (files, photos contained with iPhoto)?

    Start up in Safe Mode.
    http://support.apple.com/kb/ph14204

  • IMac G5 running OS 10.4.11. Started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup. I can get into safe mode. Tried install disc for disc utility and reloaded OS. Still get blue screen.

    I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
    I can get into safe mode. But no regular startup.
    I tried disabling bluetooth, thinking that might be related. It didn't help.
    I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
    But I still get hung on the blue screen when trying a normal startup.
    All help would be appreciated.

    Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
    http://support.apple.com/kb/HT1436
    http://support.apple.com/kb/HT1939
    http://support.apple.com/kb/HT1767
    http://support.apple.com/kb/HT1379
    I hope this solves your problem.

  • I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    Hey Dpcupcake,
    If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • Trying to install lion purchased from app store.  alert says software cannot be verified and may be tampered with.  Cannot get past alert.  help?

    I have a Mac Pro 10.6.8.  I purchased Lion from app store.  Download went well.  Am trying to install but getting an alert that says software cannot be verified.  It may b e corrupted or have been tampered with.  Cannot get past the alert.  Help?

    I have a Mac Pro 10.6.8.  I purchased Lion from app store.  Download went well.  Am trying to install but getting an alert that says software cannot be verified.  It may b e corrupted or have been tampered with.  Cannot get past the alert.  Help?

  • I have an iMac with Safari; will i be able to run LiveCycle and Designer?  I cannot get past acceptance page.

    I have an iMac with Safari; will i be able to run LiveCycle and Designer?  I cannot get past acceptance page.  I want to use and update forms and it says I need Designer.  I was trying the trial version but am having problems.

    Is there an actual individual who can give me guidance?  This "leave a question and come back days later" does not help.

  • Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

    Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

    Try these two steps:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Resetting your Mac's PRAM and NVRAM

  • When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

    When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

    The system on the original install dic is probably looking for the original video card.
    It may be possible for someone with the right skills to make an install disc for you with the driver for your new card.
    As I recall from my early days of being a Macuser, If you held down a key, (spacebar?), while starting it would open a dialog to take you through a monitor setup.

  • Installing Elements 10 cannot get past setup wants to make changes to my password

    I am installing Elements 10 to my macbook but cannot get past setup wants to make changes   type my password but goes no ferther

    Hi martha ross,
    The installer is requiring the Admin permissions to write the system files.
    Please enter the Mac password that you use to login on the Mac to continue with the installation.
    Regards,
    Rave

  • Homesharing problems cannot get past sign in

    Always having problems with the homesharing on apple tv.  States turn on home sharing but it is already on.  Brings up the log in and we cannot get past the sign in.

    Hello maxfromchesapeake,
    Welcome to Apple Support Communities.
    Sorry to hear about your difficulties with Home Sharing on your Apple TV. You can start with this article to troubleshoot Home Sharing:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Regards,
    Jeff D.

  • Can't get past Darwin console

    I just installed some Quicktime add-ons, and I restarted my Mac. It goes to a Darwin console, I can log in to the console, if I exit, it takes me back onto the startup user menu, and if I select my user account, I'm right back into Darwin, being prompted to login.
    I've never used Darwin. How can I get past this console and onto my graphic interface/desktop?

    Andy
    The first thing to do is to look at your logs, to see the cause of being unable to start up. But rather than point you at some other threads, let's do it from scratch here. You may want to print this post out, preferably in a largish mono-spaced font.
    Since you are able to log in at the prompt, this simplifies things. After logging in, let's look at the system log—type carefully, spaces and punctuation are important:
    tail -20 /var/log/system.logThis command combination looks at the last 20 lines of your log which should be enough.
    Look especially for messages saying something like "login authorization failed", "exiting to console" or something similar. Copy the lines above that and post them here. If you don't see this specific message, post some of the lines at the end of the log.
    We'll take it from there when I see your output.

  • Cannot access the Admin Consol Tasks

    Hi,
    When I go into the Admin Screen on SAP BPC I cannot access the Admin Consol Tasks but I can access the Web Admin Tasks and my excel is working fine. 
    Logoffed and retried, same problem.
    Working on Version 5.1 SP4, Excel 2003.
    Regards
    Dean

    Hi,
    There can be 2 reasons for you not being able to access the Admin Tasks. I would request you to check the below things.
    1. You need to check the Task Profile for your user ID and verify that you have all the necessary accesses.
    2. When you login to the Admin screen, make sure that some Application is selected.
    Hope this helps.

Maybe you are looking for