Cannot get remote app to work

Downloaded app and synced to phone. However no devices are listed in iTunes unless I physically connect the iPhone to the pc. I went into the advanced settings and verified that iTunes will look automatically for remote and speakers. Any suggestions on how to get iTunes to see my iPhone wirelessly? iPhone 3g 16gig.

Update again.... Aside from this I have been having some Airport Express issues. So the other day I take the Airport, Laptop and iPhone upstairs to where the Netgear router is. I plugged the laptop and airport express into the router and Voila... The remote app worked. I unplugged laptop and AE brought all back downstairs and it was working great... the remote app is great... For about an hour. Then all was dropped again.
I dialed in to my router, The router had all devices listed above as showing attached to it- plus my wifes iphone as well.
So... Remote only works for me for an hour at a time after I connect all to the router- then disconnect.
I turned off all firewalls (windows, McAfee, Netgear)
Assured that my router can have and allows mulitple MAC address. (it sees all fine)
Drivers are all current for windows (sp3)...
Help...
Thanks
Suggestions?
Dell Inspiron

Similar Messages

HP Photosmart Printer-cannot get the apps to work with a USB hook up

I purchased a HP Photosmart Printer C310 and hooked it up to a USB, not wireless. The apps on the printer will not work, says it has to be on wireless for those features to work. When I purchased it the guy said I could use those apps even if it was on a USB hook up? Any ideas of how to get the apps to work without the wireless?

Make sure you have done this to reset the iPod
http://support.apple.com/kb/ht1320
and that you have restarted your computer since this problem occurred. You should also try disconnecting all USB devices from your computer including hubs (except standard keyboard and mouse if normally used), and connecting the iPod by itself to a direct USB port.
There are no iPod viruses. But data corruption on the iPod's storage is possible.
If doing the above does not help, you may want to do a Restore on the iPod, from the iPod's Summary tab in iTunes. This will erase the iPod, re-install its software, and set it to default settings. If data corruption or a software glitch is causing the problem, a Restore should fix it.

Cannot get Remote Desktop to work on Windows 7

Ok. I am having issues trying to connect remotely using RDP. From what I know, the network was pre-configured from another IT group and was able to get it up and running. My company was commissioned to migrate his old PC (WINXP) to Windows 7. I have gone
through the steps of allowing remote desktop and following instructions:
To configure remote access, follow these steps:
1. In Control Panel, click System And Security, and then click System.
2. On the System page, click Remote Settings in the left pane. This opens the System Properties dialog box to the Remote tab.
3. To disable Remote Desktop, select Don’t Allow Connections To This Com¬puter, and then click OK.Skip the remaining steps.
4. To enable Remote Desktop, you have two options. You can:
Select Allow Connections From Computers Running Any Version Of Remote Desktop to allow connections from any version of Windows.
Select Allow Connections Only From Computers Running Remote Desktop With Network Level Authentication to allow connections only from Windows 7 or later computers (and computers with secure network authentication).
5. Click Select Users. This displays the Remote Desktop Users dialog box.
6. To grant Remote Desktop access to a user, click Add. This opens the Select Users dialog box. In the Select Users dialog box, click Locations to select the computer or domain in which the users you want to work with are located. Type the
name of a user you want to work with in the Enter The Object Names To Select field, and then click Check Names. If matches are found, select the account you want to use and then click OK. If no matches are found, update the name you entered and try searching
again. Repeat this step as necessary, and then click OK.
7. To revoke remote access permissions for a user account, select the account and then click Remove.
8. Click OK twice when you have finished.
One thing that I found odd when he launched Remote Desktop from his home laptop is the IP entry:
Computer> [Public Router IP]:49250
Login> Domain\Admin
Password> *****
From the odd port number I would assume that was for port forwarding so I logged into his router and found exactly that. In port forwarding, he had the in/out as 49250 TCP to 192.168.30. I went into the firewall and enabled Remote Desktop in the inbound
rules.
As of right now, I can use Remote Desktop to remote into the server, and withing their server, I cam use Remote Desktop to remote into the workstation. I just can't remote into the workstation directly using the port 49250. Any suggestions on this, something
I have missing?
He has Norton Security installed on this computer and I tried adding Inbound/Outbound rules to its 'Smart Firewall' to allow remote desktop and the port.

Thanks for the reply.
When I use Remote Desktop and use the Public IP of the router without the port number (49250), I am able to get into the server. However, when I try to use RDP with the [Public IP]:49250, it will not connect to the 192.168.0.30 workstation.
Right now the router is program to forward port 49250 requests to the 0.30 workstation.
I am going to work on the Inbound/Outbound Firewall settings today and see if this will resolve the issue.

CanNOT get Remote application to work properly!!!

I give up! I have tried e/thing... turning off/ on router; turning off firewall, security software, have set in preferences to look for other remote, etc... nothing! Specifically, this is what happens: I download application and in itunes my phone is not recognized in the device list... so I can not enter the password/code. Another PC in my house running identical software as this PC has no problems at all using his application! Of course, both pcs are on the same network!
I am lost Any help? ThxS!!

Registry cleaners don't remove everything. Many files are in hidden folders within the user accounts on the operating systems. Have you tried the clean tool?
http://www.adobe.com/support/contact/cscleanertool.html
Also, something else to consider, try making another user account on the computer and see if that helps. I've seen user profiles on computers become corrupt and can cause this issue as well.

Cannot get screen sharing to work long distance...

I set up an AIM account for my mother-in-law so that I could remote screen-share her MacBook and help her with learning how to use it and trouble shoot it (it's a Late 2008 Aluminum MacBook hand-me-down from my wife).
I've set up the account, but cannot get remote screen sharing working. Screen sharing works fine over bonjour, but no go over the internet using AIM. I can control my wife's MBA from my iMac and vice-versa, but neither of us can control her MacBook. When we choose "Ask to share users screen...", we get the pop up window stating "Waiting for response from user", along with the spinning gear icon. If she chooses "Share my screen with...", the pop up window appears on our Macs and we're able to choose accept. But then the pop up window switches to "User would like you to share his or her screen" and just sits there. Nothing happens. On her screen, she gets the message "waiting for response from user" and nothing else happens.
After a long wait, my screen will say, "There was a communication error during your chat. Messages didn't receive a response from..." and gives me the option to report the details to Apple.
What am I doing wrong?
Her MacBook is running Mavericks, as are our machines.
Message was edited by: pmpknetr21
Message was edited by: pmpknetr21

Hi,
@mac.com and @me.com ID works as AIM Screen Names (you add them like they are and existing name) but only if you are using Messages 7 or 8 plus later versions of iChat 6 in Lion.
You should be able to use the Apple Issued IDs in Mavericks.
If you using an AIM Registered name try using it without the @AIM.com or @AOL.com suffix (User Name only)
As AIM can "read" the Apple Database it will think the Apple IDs exist already but may not tell you that is the reason you can't re-register them.
Can you post the info being sent to Apple here ?
However stop the log after about 10 lines of the Binary Images (I will not need it all).
9:28 pm Sunday; August 3, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation. It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0. How can I get this to work?

I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation. It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0. How can I get this to work?

Oaky, at least we got that far. Next step is to determine if all those "numbers" are really numbers. Changing the format to "number" doesn't necessarily change the string to a number. The string has to be in the form of a number. Some may appear to you and me as numbers but will not turn into "numbers" when you change the formatting from Text to Number. Unless you've manually formatted the cells to be right justified, one way to tell if it is text or a number is the justification. Text will be justified to the left, numbers will be justified to the right.
Here are some that will remain as strings:
+123
123 with a space after it.
.123

I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

You can go to the Apple online store and purcahse a copy of Mountain Lion. This will give you a redemption code, which you can use to download Mountain Lion from the App Store. Unfortuantely, I'm not aware of any other way to legally purchase it. I have never seen Apple release Muontain Lion on DVD.
In terms of Apple Service, they just need the serial number of the machine to check the purcahse date. It is usually correct, to within a few weeks. A quick Google search should give you the correct number to dial.
I hope this helps.

IPhone 4 Remote App Not working

Hello,
Sorry for posting another 'not working' thread, but having searched the forum I cannot find my answer.
I am not very technical, but I have iTunes and an iPhone 4.
I have the remote app and the app has worked perfectly up until recently.
I have upgraded iTunes to 10 and also my antivirus.
Now I know alot of these things could be caused by the firewall, but I have allowed iTunes to be let through the firewall and I have switched off the firewall in the past to ensure it was not this.
When I switch on the computer and open iTunes then go to the remote app it works. It is when the iPhone 'sleeps' that the library wont re connect, OR if i have been using iTunes and then try and start the remote that it will not work.
Any ideas at all as it is so frustrating. I am not technically minded, so switching router channels etc and proxy settings/DHCP etc dont really make sense to me.
I have tried rebooting everything including the router, but believe it is something simple as it was working prior to iTunes 10.
I am running a PC on Vista
Thanks
Steve

no I use both ipad2 iphone4 with remote app and have no issues with ios
try removing the setup and start over

Cannot Get Animated Buttons to Work in DPS (InDesign 6.0) Help Please!!

In DPS tips, using the iPad app, some of the navigational buttons appear like SWF buttons, but, I cannot get SWF buttons to work in DPS. I have been trying with Multi-States, but, cannot get that to work either. Can you tell me how to get a SWF like button to work in DPS - I'm working with ID 6.0.
Do you have an eaasy answer? Is there a tutorial out there I can view? Is their a step-by-step I can read?
BTW, I do understand how buttons work and the types of events that work in DPS.
Thank you
Lain Kennedy

Hi Uwe,
First, let me say "I cannot even believe all the wonderful information I have recieved from my original post," and, I want to thank you for your understanding.
I have been a designer for many years, working before the computer, and, since the mid 80's working with a variety of software to produce both print and web projects. I must say, I am biased on the Adobe Creative Suite, and, have had amazing success with these tools.
Nonetheless, I have been working with DPS for about a month now (and a month does not make a career), and, have to admit, I am looking at DSP as a Hybrid between Print and Web. Yet, it is neither print or wed, it is it's own element, and, I'm just having growing pains learning, especially the terminology.
Yes, I am trying to explain SWF Buttons, when in reality, it is DPS Buttons, and, my thinking is based on print and web. Now, it is - in some ways - like going back to school learning DPS and DSP terminology. It is a bit frustrating, but, I know I will get it.
Now that I have looked at my first MSO test, I followed the instructions in DPS Tips, I realize that the Button is in the "Normal State" as I (interact, this is my terminology) touch or hover to make the button work. It is in the "Click" state that the Button triggers the MSO to work, and, I finally get that now - okay, I'm slow to learn. And, I will be building a complex MSO to prove the point to myself.
I was wondering, besides DPS Tips, are there any books, apps, specific sites that are very specific on "ALL" the things one can do with DSP?
Again, thank you and, all the folks who have taken their time to respond to my post. All the information is truly appreciated.
Sincerely,
Lain Kennedy

Cannot Get Remote to Connect to Library

I am trying to get the Remote app to work with iTunes on my iMac. I keep getting a box pop up on the iPhone that says "Remote could not connect to your library." and then it goes on to say a few lines about firewalls, but I am not using any. I have checked the wifi IP address listed in settings on the iPhone and it is different than the one listed in Preferences/Network/Advanced/TCP/IP.
I suspect that if I could get the IP addresses to match I would be able to use the Remote on the iPhone, but I have no idea how to change the addresses and what might happen to my wireless connections if I did. There are all these options like DCHP, BootP and Static and I don't know which to even attempt to go into to alter.
Any insight to this problem would be appreciated.

Hi SwellMax,
I think you seem to be on the right track here, however you don't want the IPs on your iPhone and Mac to match exactly. This would be an IP conflict.
What you do want is those IPs to be in the same subnet. Really this means be on the same logical network, regardless of how the network is built.
Let's do this test:
1. Have a look at the IP address on both the iPhone and Mac. Hopefully the first few set of numbers (octets) will match. Example: in my case, my Mac is 192.168.0.100 and my iPhone is 192.168.0.107. The "192.168.0." part matches. If they don't match this is likely the problem!
If they do match, we'll make some assumptions here and jump to testing connectivity.
2. Open the Terminal application on the Mac.
3. While your iPhone is awake, type in the following (without quotes and replace the IP): "+ping <my iPhone's IP address>+"
in my case, the above command would look like "+ping 192.168.0.107+"
if you are contacting the iPhone you'll see something like "+64 bytes from 192.168.0.107: icmp_seq=30 ttl=64 time=597.941 ms+"
If you are not contacting the iPhone you'll see something like "+Request timeout for icmp_seq 19+"
NOTE: btw... the ping will go on forever until you hit the key combination control+C on your keyboard
If the above works, then likely your network connection is OK, and there is something else, not your network. Make sure the iPhone is awake and the screen is lit when doing this test! I noticed my iPhone won't respond to pings if the screen goes dark.

[svn] 3256: More changes to get remote browser functionality working for MXUnit.

Revision: 3256
Author: [email protected]
Date: 2008-09-18 09:14:24 -0700 (Thu, 18 Sep 2008)
Log Message:
More changes to get remote browser functionality working for MXUnit.
Need to copy http client jars from trunk/lib to trunk/qa/lib as part of the build. The http client jars are used by MXUnit when the remote browser, browser factory is being used.
Also need to copy xalan.jar from trunk/lib to trunk/qa/lib now as William recently made changes to MXUnit that added a dependency on xalan.jar.
In mxunit/build.xml made the browserFactory class for the MXUnit task use a property called mxunitBrowserFactory so different browser factories can now be passed in.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/build.xml
blazeds/trunk/qa/build.properties
blazeds/trunk/qa/resources/frameworks/qa-frameworks.zip

Ah, interesting. Here's what I get when I boot with the old GeForce 7300 plugged in.
System Profiler shows no extensions with "ATI" in the name. I'm not sure if this is to be expected though. Does System Profiler -> Software -> Extensions display the kexts installed on the system, or only those that the kernel decided to load at boot time? If the latter, I guess I wouldn't expect to see them. If the former, then might there be some registration step I need to do to tell the system that the ATI kexts are present and able to be loaded?
As for the presence of the extensions, if I look in /System/Library/Extensions, I find the following files when I do an 'ls -lF | grep ATI'...
ATI1300Controller.kext
ATI1600Controller.kext
ATI1900Controller.kext
ATI2400Controller.kext
ATI2600Controller.kext
ATI3800Controller.kext
ATI4500Controller.kext
ATI4600Controller.kext
ATI4800Controller.kext
ATI5000Controller.kext
ATIFramebuffer.kext
ATIRadeonX1000.kext
ATIRadeonX1000GA.plugin
ATIRadeonX1000GLDriver.bundle
ATIRadeonX1000VADriver.bundle
ATIRadeonX2000.kext
ATIRadeonX2000GA.plugin
ATIRadeonX2000GLDriver.bundle
ATIRadeonX2000VADriver.bundle
ATIRadeonX3000.kext
ATIRadeonX3000GA.plugin
ATIRadeonX3000GLDriver.bundle
ATIRadeonX3000VADriver.bundle
ATISupport.kext
So lots of ATI-related goodies. The dates are all either Aug 2 or Aug 6, so I'm guessing they came with the Snow Leopard Graphics Update, which I think was released just after those dates.
I'm getting ready to return the card and try another, but will hold off another day or two, since it still seems plausible that there might be a software issue lurking...
Thanks again for your help,
Jerry

I cannot get Copy & Paste to work in iOS 5

I cannot get Copy & Paste to work on my iPhone or my iPad since updating to iOS 5.1
I can copy and paste within an app, buy copying from one app, then going into another, Paste is not available.
Anyone one else having this isuue? I have tried rebooting both devices but no change.

I just checked this out by opening a doc in PlainText and copying some sameple text that I typed. I hit enter a couple of times, pressed on the screen, the paste button appeared and I was able to paste no problem.
I then opened a fresh document in Pages and pressed on the screen to open the paset button and got the text to paste into the Pages doc with no problem.
You may have a glitch in your iOS 5.1 update. You might try doing a reset all settings reset and set the phone as a new one (You should not lose any data, or media) You will need to go in and reset any changes you may have made in settings as this set all of them back to factory defaults but your music, pictures, data, email accounts etc. will not be erased.
If this doesn't work you may need to reinstall the iOS again.I think you can do this through iTunes but am not 100% sure. You may need to take it to your local genius bar (Hope you have one close to your house) and ask them to reinstall the OS for you.

I cannot get folio builder to work in CS6 InDesign.

I cannot get folio builder to work in InDesign. I have updated InDesign and uploaded a new all language CS6 plugin for InDesign apps but still the program says I don't have the necessary files and redirects me to the plugins I already downloaded. I am not certain what is wrong.

DPS questions should be asked in the DPS forum. I've moved your question there.

Is it possible to get Remote Desktop to work from my Surface 2 to a local PC running Vista?

Is it possible to get Remote Desktop to work from my Surface 2 to a local PC running Vista?
I keep getting "cannot find PC" entering IP or PC name
but as a test I have set up my PC to do web hosting, and I can browse to the IP address using desktop IE and see my local web pages.
I've just found a reference that says it has to be Business Vista.
Why would Microsoft put such a STUPID restriction in?
I think this Surface thing is going to go back if so.
What about Win8 64 Pro? Will that work?

Hi,
Thank you for posting in Windows Server Forum.
Yeah, windows 8 pro can connect to surface 2. There is detailed article guide for it, please check below link.
Your Complete Guide to Using Remote Desktop on the Microsoft Surface and Windows 8
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I cannot get new apps on my iPad 1

I cannot get new apps on my iPad 1

Ok...... Do you have a question for us? Perhaps you could start by explaining what's happening when you try to download apps. What error messages are you getting? What troubleshooting steps have you already tried?
Please note that the original iPad can't be updated beyond iOS 5.1.1. Apps that require a later version of iOS won't work on your device.
Best of luck.

Cannot get remote app to work

Similar Messages

Maybe you are looking for