Cannot Get USB Slot to Work

I have a 2011 MacBook Pro.
All I remember doing was accidently unplugging my Wacom 4 Drawing tablet.
(I am really thinking about getting one of those Wireless ones... hopefully that's provide a bit more comfort.)
Anyways. I go to plug it back in as I have always done.
Then a flash message popped up and the the system stopped allowing me to use the USB port.
The other port works just fine.
I can switch to bootcamp and then both USBs work again.
(I only use bootcamp if I want to play a game that requires Windows to run it. Otherwise I prefer my Mac Side for things like drawing, editing, animating, etc.)
I haven't a clue where to navigate to.
My first choice was system preferences. But there isn't even a hardware option.
Any clues would be great.

Hello
Try to disable USB Error Detection:
1. Right-click My Computer and then click Properties.
2. Select Device Manager to view the Device Manager
3. Locate and click the Universal Serial Bus Controller entry.
4. Double-click Universal Host Controller and then click the Advanced tab of the Universal Host Controller Properties.
5. Put a checkmark in the box for Disable USB Error Detection. Click OK.
6. Restart the computer to see if "Bandwidth Exceeded" message occurs again
Did you use recovery media to reinstall WXP? When someone write it worked before and now not it is really not easy to say why this happen. Try to configure notebook as before and maybe it will work again. Behringer BCD2000 is not known to me and I dont know how it works and which software must be preinstalled there.
Can you use different USB devices like external HDD, USB mouse, USB memory stick or printer?

Similar Messages

Cannot get USB port to work after re-installing of SP2 on Satellite Pro L20

After re-installing XP Home SP2 and downloading all the updates & Drivers from here I cannot get my USB port to work properly, if I have more than one peripheral plugged in it says "Bandwidth Exceeded".
I have a Behringer BCD2000 which is a souncard/midi controler for DJ mixing, it worked fine before i reinstalled windows, now it clicks and pops when playing tunes, also the ASIO doesn't work when I run Traktor (Dj software) and the program freezes. Any other external sound card wont work either. I've been all through the device manager no conflicts apart from an ! over Serial under hidden devices.
I'm lost, is my only option buying a PCMCIA sound card, it worked fine before so surely there is a software solution to this?
If anyone can help I'd be most appreciative.

Hello
Try to disable USB Error Detection:
1. Right-click My Computer and then click Properties.
2. Select Device Manager to view the Device Manager
3. Locate and click the Universal Serial Bus Controller entry.
4. Double-click Universal Host Controller and then click the Advanced tab of the Universal Host Controller Properties.
5. Put a checkmark in the box for Disable USB Error Detection. Click OK.
6. Restart the computer to see if "Bandwidth Exceeded" message occurs again
Did you use recovery media to reinstall WXP? When someone write it worked before and now not it is really not easy to say why this happen. Try to configure notebook as before and maybe it will work again. Behringer BCD2000 is not known to me and I dont know how it works and which software must be preinstalled there.
Can you use different USB devices like external HDD, USB mouse, USB memory stick or printer?

I am on my 2nd time capsule and cannot get usb port to work

I have replaced my old Airport Extreme with an with a 2TB Time Capsule. Everything worked except the USB port. I worked with Apple Tech Support and we determined the USB Port wasn't working so I took the 2TB Capsule back and they were out of 2TB models, so I came home with a 3TB Time Capsule. Everything works except the USB Port. I have tried printers, USB hard drives, Flash Drives, etc. to no avail. What am I missing? I know I didn't get two Time Capsules with defective USB ports.

The port is under powered.. this is often the experience people have.. you need to use a powered hub to get things to work. Why they worked on Gen1 and not Gen4 no idea.. but your experience is not unusual.
The TC is also pretty picky when it comes to hubs.. so not everything works even then.
Are you running SL as per your info..? That should be no problem but for Lion you need to download airport utility 5.6 to even see what is connected. There also could well be some issues in 7.6 firmware for the TC.

Equium A200-196: Cannot get all speakers to work with Creative T7900 home cinema system

I run windows Vista home premium, on my Toshiba Equium A200-196, and i have a 7.1 Creative T7900 system.
I cannot get all speakers to work. Only the woofer and two front speakers are currently playing sound.
The sound option in the control panel doesn't give me any options besides stereo speakers.
I have no option of selecting 5.1 or 7.1 speakers and i need to know do i need a software driver (all drivers are showing up as up-to-date), or do i have to change some other option, or purchase an external sound card?
I only have two jack inputs, a mic in and headphone out. How can i get all speakers to work and achieve the home cinema experience?

Hi there,
I dont think that the sound card is capable to do 5.1/7.1 since there are many more jacks required then only one "sound-output".
If I were you I would purchase a external USB-soundcard which is capable to do 5.1 or 7.1 to deliver you the full home-cinema experience.
Another solution is not existent. Sorry mate.
greets

I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

You can go to the Apple online store and purcahse a copy of Mountain Lion. This will give you a redemption code, which you can use to download Mountain Lion from the App Store. Unfortuantely, I'm not aware of any other way to legally purchase it. I have never seen Apple release Muontain Lion on DVD.
In terms of Apple Service, they just need the serial number of the machine to check the purcahse date. It is usually correct, to within a few weeks. A quick Google search should give you the correct number to dial.
I hope this helps.

I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I would delete the account and try to re-enter it. Also, you have to let your firm's IT department know that you want to sync work email on your personal devices before they actually work.

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

HT2240 I cannot get my registration to work for QuickTime Pro for Mac OS X 10.6.8 using QT 7.6.6

I cannot get my registration to work for QuickTime Pro for Mac OS X 10.6.8 using QT 7.6.6 I have copied and pasted exactly as require (I don't have an organization). Any suggestions? Thank you!

There is no QuickTime System Preferences pane in 10.6.8 or later.
You enter the registration under the player 7 menu.

I cannot get airport extreme to work. Can you help me?

I have a G5 Power PC. I recently purchased a macbook and an Airport Extreme. I cannot get the airport to work. Can somebody help me please??
G5 Power PC and macbook Mac OS X (10.3.9) new OS X on Macbook

I plug the ethernet from the airport to the back of the modem (a Webstar unit) from my cable provider. Then I plug the other cable from the back of the airport into my G5. Then plug in the power cord. I get lots of flashing lights - "thinkin & blinkin", but then I get a message that it cannot locate the server. Even rebooted. I've been waiting for the IT guy to call/email me back me back but no response yet. I'm guessing I may just need a new location, but I'm not wired to think IT-like (I'm a very right brained graphic designer), I I don't want to screw anything up.
Do I need to just go through a new internet setup?
G5 Power PC and macbook Mac OS X (10.3.9) new OS X on Macbook

I cannot get wireless mouse to work in windows 7 using bootcamp

I cannot get wireless mouse to work in windows 7 using bootcamp

OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

Cannot get exception-type to work

          WLS 60 SP1 (#101616)
          Cannot get <exception-type> to work. WLS shows standard “Internal error
          500” page instead of a custom error page. The custom error page is shown
          if <error-code> is used instead of <exception-type>.
          Any ideas? Thanks


Hi @utopian,
Welcome to the HP Forums!
I understand that you cannot scan with your HP Officejet Pro 8500 on Windows 7 using a wireless network. I am happy to look into this issue for you!
Please take a look through this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning for HP Officej....
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot get iTunes DJ to work

No doubt it is something really obvious that I'm missing, but I cannot get iTunes Dj to work. If I click on iTunes DJ in the left column, right section of the window says "iTunes DJ" and explains that I can make a continuous mix, but there is no list of music. The play button is greyed out.
The help file says "To select a specific playlist (instead of your library) for the live mix, choose an option from the Source pop-up menu at the bottom of the iTunes window."
but there is no Source pop-up menu at the bottom of the iTunes window.
Any ideas?

Do you see the grey bar at the bottom of the screen when you select iTunes DJ, the one with the Settings and Refresh button, as seen in the picture on this web page? If not, then the bottom of the window may just be off the screen on your system so you don't see the Source selector. If that does seem to be the problem, try changing the resolution of your Mac's screen (Displays system preference) to the highest resolution. If it already is, try changing it to a lower resolution, then back. That may get the iTunes window to reappear..
If not, open the Script Editor application, paste in the following text (up to and including the line that says "end tell") and click the "Run" button:
tell application "Finder"
set {d1, d2, d3, d4} to (get bounds of window of desktop)
end tell
tell application "iTunes"
set margins to {d1 + 10, d2 + 54, d3 - 10, d4 - 148}
set bounds of window 1 to margins
end tell
If the iTunes window is running off the screen, that should restore it.
Hope this helps.

Cannot get wireless scanner to work

wireless printing to my HP Officejet Pro 8500 works fine but I cannot get the scanner to work - it fails to even communicate with the HP device. My operating system is Windows Vista. The error message I get when trying to use the scanner by clicking on the "HP Officejet Pro 8500 A910 Scan" icon is "Scanner communication cannot be established."
Thank you for your help
This question was solved.
View Solution.

Hi @utopian,
Welcome to the HP Forums!
I understand that you cannot scan with your HP Officejet Pro 8500 on Windows 7 using a wireless network. I am happy to look into this issue for you!
Please take a look through this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning for HP Officej....
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,

Cannot get screen sharing to work long distance...

I set up an AIM account for my mother-in-law so that I could remote screen-share her MacBook and help her with learning how to use it and trouble shoot it (it's a Late 2008 Aluminum MacBook hand-me-down from my wife).
I've set up the account, but cannot get remote screen sharing working. Screen sharing works fine over bonjour, but no go over the internet using AIM. I can control my wife's MBA from my iMac and vice-versa, but neither of us can control her MacBook. When we choose "Ask to share users screen...", we get the pop up window stating "Waiting for response from user", along with the spinning gear icon. If she chooses "Share my screen with...", the pop up window appears on our Macs and we're able to choose accept. But then the pop up window switches to "User would like you to share his or her screen" and just sits there. Nothing happens. On her screen, she gets the message "waiting for response from user" and nothing else happens.
After a long wait, my screen will say, "There was a communication error during your chat. Messages didn't receive a response from..." and gives me the option to report the details to Apple.
What am I doing wrong?
Her MacBook is running Mavericks, as are our machines.
Message was edited by: pmpknetr21
Message was edited by: pmpknetr21

Hi,
@mac.com and @me.com ID works as AIM Screen Names (you add them like they are and existing name) but only if you are using Messages 7 or 8 plus later versions of iChat 6 in Lion.
You should be able to use the Apple Issued IDs in Mavericks.
If you using an AIM Registered name try using it without the @AIM.com or @AOL.com suffix (User Name only)
As AIM can "read" the Apple Database it will think the Apple IDs exist already but may not tell you that is the reason you can't re-register them.
Can you post the info being sent to Apple here ?
However stop the log after about 10 lines of the Binary Images (I will not need it all).
9:28 pm Sunday; August 3, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Cannot Get USB Slot to Work

Similar Messages

Maybe you are looking for