Cannot input new number for depost

Hi,
My client cannot input new deposit.
When input new deposit, deposit # : 520900001 is appear on the screen.
When click add, the following message appear :
"This entry already exist in the following table 'Deposit' (ODPS)."
On document numbering screen, it shows 520900001 is the next no.
Also, Check into ODPS file there's no. deposit # : 520900001.
SAP version : 2005, SP 01, PL 39
Thank you very much in adavance.
Best regards,
Surya

Hi Surya,
Please perform the following first;
Goto> Administration> System Initialisation>General Settings>Services--> Perform Data Check
Check this, log out of sap and log in again. Let me know if the problem still persists.
Regards,
Joseph

Similar Messages

HT1918 cannot input security code for credit card

cannot input security code for credit card update

Where are you doing this? Go to your account in the Apple store and re-enter (not just verify) all of your account information and be sure one click ordering is on and try again
LN

Cannot find serial number for PSE 10 for new computer

Hi,
My laptop had water spilled on it and I was able to save the hard drive. I have the setup file for re-installing my PSE 10 software onto my new laptop, but can't find my serial number. In my order history, PSE 9 is the latest one on the list, so I can't find my serial number for PSE10.
Where can I find it? Is it in a file somewhere in my hard drive because I can't find it there either. If anyone can help I would sure appreciate it!
Thanks,
Wendy

Welcome to our community, Wendy
Unfortunately, although this forum name is Installation/Licensing, it's really for these issues as related to Adobe Captivate. Not just any Adobe product.
I do understand Adobe has created a new forum for general issues related to installing and whatnot. It may be found here:
http://forums.adobe.com/community/download_install_setup
So you might try clicking that link above and posting your issue there.
Sorry we couldn't help you here, but best of luck to you with solving your issue! Rick

Repost, any ideas?: Cannot save new number to phone

I've attempted to save 2 numbers directly to my phone since turning on the synch with my Outlook contacts via Exchange, and they just disappear. Shouldn't it simply save the number and put it into my Outlook contacts? Or will it only overwrite from Exchange to my iPhone?

What method of syncing are you using? Are you set up for Exchange (ActiveSync) over-the-air or are you syncing using iTunes?
The ActiveSync method works just fine for me. I'm on version 2.2 of the firmware. I just tap Create New Contact for a number and type in a name -- it gets added and syncs with Outlook/Exchange.

Cannot save new number to phone with Exchange contact synch enabled

I've attempted to save 2 numbers directly to my phone since turning on the synch with my Outlook contacts via Exchange, and they just disappear. Shouldn't it simply save the number and put it into my Outlook contacts? Or will it only overwrite from Exchange to my iPhone?

What method of syncing are you using? Are you set up for Exchange (ActiveSync) over-the-air or are you syncing using iTunes?
The ActiveSync method works just fine for me. I'm on version 2.2 of the firmware. I just tap Create New Contact for a number and type in a name -- it gets added and syncs with Outlook/Exchange.

I cannot load newer version for my iPhone 3GS.

Hey, I cannot load the newer versions for my iPhone 3GS for some time now. Somehow it says there is a problem with the i-net connection, but that can't be it. Please help me someone!
Thank you!

Have you tried to diable or even uninsall your antivirus software. Also you might want to try this article http://support.apple.com/kb/ts3297

After upgrade cannot input serial number

I cloned our existing 10.4.11 Tiger Server to allmost identical hardware to test the migration to 10.5.4 Server. After the upgrade through the install DVD, I cannot input anything at the first screens after the first reboot. Mouse is working, capslock light is working, I also can turn the volume up and down. But I cannot type and numbers or letters.
I tried different keyboards, different usb ports. I used the server assistent to upgrade, did it localy. Nothing worked. Everytime I come to the serial number screen, the keyboard stops working.

I just had this problem. What I finally did was install the admin software on another computer on the network and logged in remotely. I was then able to enter the serial number.

New number for a workflow template

Hi all,
do you know if it's possible in 4.7 to change the number of a workflow template, for example from WS90000017 to WS90000007. After some technical problems I need this kind of operation but I've seen that after a copy the number is automatically created by the system using an ordered sequence.
Thanks in advance, best regards.
Angelo

Hi Anjelo,
Number of workflow template is generated automatically by the system based on Workflow customization settings.
And the very intension is to have each workflow template a unique number across the system.
By the way, what was the reason, you needed a diferent number for same template?
Regds,
Akshay Bhagwat

Cannot submit serial number for iwork 06

Inactive submit button for serial number for iwork 06. the button is "ghosted" grey and does not respond

larry,
There's really only one reason the button would stay
gray, and that's if the serial number you've entered
is invalid. Most of the serial number-entering
problems were with iWork '05, so I'm surprised to
hear of a problem with '06. My suggestion:
carefully reenter the number, making sure you don't
confuse zeros with capital ohs- or the number 1 with
a small L. If you're absolutely certain you've
entered the number correctly, and it still won't
cooperate, you may need to call Apple tech support.
We've heard of cases where the serial number was
just plain defective. Sorry I can't be more help.
-Dennis
Thanks. I've re-entered the number many times and the problem persists. I think the problem is the button window itself . Normally the submit button is active but since I upgraded my operating system to Tiger I have notice a similar problem in Quicken download. Is it a glitch in the upgrade?
Larry

Cannot find serial number for existing LR 5 in order to install LR 6. where can I find it?

where can I find the serial number for an existing installed version of LR 5?

Trials do not have serial numbers, so if you have a serial number you oughta try it and see. If you use a serial number on a trial version it will activate it to full version status.

Require input agreement number for new defined PO document type

Hi guys,
We have defined a new purchase order type.
This order type can only be converted from contract.
How can we process that? I cannot find this setup neither in documen type nor screen layout.
Jason.

Hi
If you feel that system should not allow you to proceed further wihtout without flagging the return check box at line item level, you have set it in configutaion and the step is as follow..
First you have to creeate a new field selction key under Materiaal Management --> Purchasing >Purchase Order>Define Screen Layout at Document Level
Select NBF field selection and click on Copy icon
Change the Field slection key code and description as you like, say for example ZNBF
Now double click on created field selection by that you will get list of field selection group
Double click on GR/IR Control, system displays list of fields with different options of selection and by default you can find all the fields are have been checked under optional entry
Check on Requried Entry check box of field "Return Indicator" and save it.
Now the next step is assigning the newly created field selection key (ZNBF) in to docuemnt type
For this, click on Define Document Type, select the newly created field slection key for the newly created PO document type for return and save.
Now when you try to create PO with the newly created document type, system will not allow you to save the document until unless you check the retrun item check box.
I hope this will help..
Best Regards..

IPad - Unable to complete cellular data setup, cannot input phone number.

Hi,
I purchased my iPad two days ago, it's been brilliant excluding the fact I can't activate my 02 micro-sim. When I'm obliged to input my details e.g. name, telephone and registration details, I can do so, excluding my telephone number as such I cannot complete the registration process.
I've tried copying/pasting in the data, doing a hard reset and restoring the device entirely. I'm running iOS 4.2 beta 3, all to no avail.
Any advice?
Best,
Grant

It may be a problem with the beta, report it to the developer you are working for, or if you are the developer report it over on that site which you should have access to.
If you are neither of the above you will just have to wait until the issue is resolved.

Can't input Serial number for Apple Remote Desktop 3

I've just finished installing a new MacPro with OSX 10.4.8 and all software updates. Hardware includes wireless keyboard and mouse otherwise it's a vanilla machine. I installed ARD 3 and attepmted to input the serial number. The field will only accept lower case letters and numbers but the serial is listed in all upper case. ARD says invalid serial number. I tried with a USB keyboard as well but "no-go." Will someone please help me. Thank you

Thank you for your reply... I resolved this issue about 5 minutes before I saw your response. When I had installed ARD3, ARD2.2 remained installed rather than being overwritten as I expected. When I started ARD, it was ARD2 that actually started and it did require lower case serial number. I removed all ARD instances, reinstalled and it took the correct SN. Dumb Technician error. Thank you.

Cannot recover serial number for stolen MacBook

My wife just had her MacBook stolen. She registered her MacBook when she bought it, but we cannot find the serial number under her accounts. We have checked both under her Apple ID and iCloud ID and the computer is not showing up. This is an older model, 2010, so am not having much luck with finding the receipts or box.
Any ideas on how we might find the serial number?

Unfortunately I did not register the laptop, nor did I save the box it came in. I found my receipt - it shows the model number only, no serial number. So my only recourse is to the store where I bought it (Best Buy). I have sent them all the info from my receipt ... we'll see if they can find it for me.
Thanks for all your help.

Cannot validate serial number for PS elements 13

I recently purchased PS Elements 13. I installed succesfully from DVD on Windows 8,1. It's first installation,no previous versions. Also created Adobe-ID succesfully.
But... I cannot validate my serialnumber, preventing me to use the software obviously. During validation process a message is shown: "Connect to internet to validate serialnumber" (Translated from Dutch). I'm 100% sure I do have internet-connection during this process.
So currently I'm stuck with this problem.
Hope anyone can help.

Community volunteers can’t really help with serial number issues. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

Cannot input new number for depost

Similar Messages

Maybe you are looking for