Cannot install Web Management Gateway (KB968934) on Windows 2003 SP2 Enterprise

I have installed the following prerequisites:.Net Framework 3.5 SP1, KB969166 and KB969429.
I also update my Windows Installer to 4.5.
Installation of the Web Management Gateway is failing saying I don't have a prerequisite. I don't know what else it is looking for. The server is a domain controller, running SP2 and fully patched with the exception of Silverlight and .Net Framework
4.0. Below is the log file from the attempted installation. Any help would be greatly appreciated.
0.046: ================================================================================
0.046: 2011/01/06 08:15:10.078 (local)
0.046: d:\a8bdf6e05ac0f8597b\update\update.exe (version 6.3.15.0)
0.046: Hotfix started with following command line:
0.046: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.093: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.093: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.093: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.093: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.093: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
0.093: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
0.093: C:\WINDOWS\system32\netlogon.dll is Present
0.093: FileVersion of C:\WINDOWS\system32\netlogon.dll is Greater or Equal To 5.2.3790.4482
0.093: Condition succeeded for section Prereq.CheckDCLocatorQFEInstalled.Section in Line 3 of PreRequisite
0.093: C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Present
0.093: FileVersion of C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Greater or Equal To 3.5.30729.4126
0.093: Condition succeeded for section Prereq.CheckSDSAMQFEInstalled.Section in Line 4 of PreRequisite
0.093: InstallerVersion is Present
0.093: SOFTWARE\Microsoft\Updates\Windows Server 2003\SP10\KB968934\InstallerVersion is Greater or Equal To Specified Value
0.093: Condition Check for Line 5 of PreRequisite returned FALSE
0.093: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.093: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.109: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
3.984: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
3.984: User Input: OK
3.984: Update.exe extended error code = 0xf0f4
3.984: Update.exe return code was masked to 0x643 for MSI custom action compliance.

I appreciate you guys taking the time to respond, I just wonder if you read the details of my question? I have specifically stated that the above hotfix
is installed along with the other prerequisite that the Install Guide mentions. Furthermore I have not only checked the log but posted it for review.
I'm thinking the above advice is almost automated, it is the same as I found in numerous searches. The problem I have here is I DID read the manual, have done what it says and still get this error.
This morning I reinstalled the hotfixes and tried the install again. Here is the log from today:
Please note the bolded line, it seems there is some registry value being checked but I don't know what so I can fix it.
0.219: ================================================================================
0.219: 2011/01/07 06:23:18.359 (local)
0.219: d:\de2e5a04497c892e775b9e2d1a85b1\update\update.exe (version 6.3.15.0)
0.266: Hotfix started with following command line:
0.282: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.313: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.313: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.313: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.328: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.328: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
0.328: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
0.328: C:\WINDOWS\system32\netlogon.dll is Present
0.328: FileVersion of C:\WINDOWS\system32\netlogon.dll is Greater or Equal To 5.2.3790.4482
0.328: Condition succeeded for section Prereq.CheckDCLocatorQFEInstalled.Section in Line 3 of PreRequisite
0.328: C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Present
0.328: FileVersion of C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Greater or Equal To 3.5.30729.4126
0.328: Condition succeeded for section Prereq.CheckSDSAMQFEInstalled.Section in Line 4 of PreRequisite
0.328: InstallerVersion is Present
0.328: SOFTWARE\Microsoft\Updates\Windows Server 2003\SP10\KB968934\InstallerVersion is Greater or Equal To Specified Value
0.328: Condition Check for Line 5 of PreRequisite returned FALSE
0.328: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.328: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.344: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.344: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
2.016: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
2.016: User Input: OK
2.016: Update.exe extended error code = 0xf0f4
2.016: Update.exe return code was masked to 0x643 for MSI custom action compliance.
Can either f you or anyone else help me identify what it is trying to get from the registry and what the proper value needs to be?

Similar Messages

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue. I've removed all the services, tried moving the dll files as suggested, but I still have no success. Spent all day on this issue. I am running windows 7.

Sorry to hear this isn't going smoothly for you. Try Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
tt2

Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KC

Hi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC

Cannot install Application Manager: "Installer failed to initialize"

Hello,
Cannot install Application Manager. I get this error message: "Installer failed to initialize".
Please help,
g2598m

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Cannot install HP Photosmart 2610 Driver with windows xp

cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

Hello,
Please check if you have an ADMIN rights to log into your PC.
Else, create an ADMIN user account and then run the installation ,
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Cannot install LR5 due to not having Windows 7.

I purchased an update of LR5 and cannot load it because I do not have Windows 7. Is there anything I can do other than buying a new computer?

From what I conclude, it is not an upgrade to 4.4, but a stand alone program that all of a sudden needs windows 7, which I do not have. After downloading windows 7 test program to see if I can have windows 7 and it's compatibility, it turns out my machine is not compatible or many issues with warning symbols. I am in the process of purchasing a new laptop with 12GB ram and 1TB hard drive, windows 8, with NVIDIA G Force video card just so I can play with LR5. All I am saying is, if it's an upgrade, fine, don't change the operating system requirements. Make it a stand alone program. Then, previous owners of LRxx have the option of buying LR5 at a reduced rate rather than paying full price. Then everyone is aware of the incompatibilities.
Thx for listening to my rant and I appreciate Adobe to offer to repurchase the software. I just hope I can re-load LR4.4 on this new laptop and accept LR5 without having to pay again for LR4.4.
Rémi Villars Jr.
[email protected]
Date: Fri, 14 Jun 2013 16:50:13 -0700
From: [email protected]
To: [email protected]
Subject: Cannot install LR5 due to not having Windows 7.
    Re: Cannot install LR5 due to not having Windows 7.
    created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussion
You're welcome Rémi,
Unfortunately, purchasing software, much like anything else you buy online, is pretty much on the buyer to beware. The vendor cannot know the intended use, whether the software is being purchased for the machine at hand, or another machine, or as a gift for someone else. They provide a list of system requirements in the product pages but don't intrude into your machine to determine whether or not it is a suitable match.
It looks like Jeff might have provided a reasonable recourse for you. Hopefully you won't run into a problem there.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5410551#5410551
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5410551#5410551
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5410551#5410551. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Applications are updating but cannot install Application Manager?

Applications are updating but cannot install Application Manager? Each time I try to open Application manager it tries to install every time.After installing several times I was able to finally see the problem. It says it cannont install because some Adobe program is running. I donot see anything Adobe running except for Application Manager in TaskManager.

Ok, here is what the box that comes up says:
We've encountered the following issues:
Other instances of Adobe Application Manager are currently running which must be closed before installing this product. Please close or wait for them to complete.
I checked control panel and only see the CS6 Master suite and Adobe Help Manager listed, not the Application Manager. Before I reinstalled I used The Adobe Clean tool to remove all programs and all but this one installed fine.

AD Management Gateway Service for Windows Server 2008 SP2

Hey,
I'm having the same issue as in this thread.
https://social.technet.microsoft.com/forums/windowsserver/en-US/93be1866-8aa8-4004-be95-113b7a4faef2/ad-management-gateway-service-for-windows-server-2008-sp2
And trying to follow the 5 step procedure listed in the 3rd post, but am stuck on step 5, getting the hotfix from Microsoft. The link posted from the Hotfix page is just a generic Microsoft Support page. Which is not helpful. How do I actually contact them
(phone # or email address) to get the software?
Thanks In Advance,

No luck. I've tried the chat which asks which Windows version Im using and there's no Server 2008 only desktop versions. I called and after talking with 3 people I got cut off. There has to be an easier way to get a simple file downloaded.
You can hire me to do it for you. I am always successful at contacting MS Support.
You didn't follow the instructions I posted.
Reach us over the phone at 1-800-642-7676 (TTY: 1-800-892-5234)
http://smallbusiness.support.microsoft.com/en-us/contact/
Click Technical Support for Chat.
GREAT BIG BLUE BUTTON SAYS "Technical Support" - CLICK IT AND SELECT WINDOWS SERVER AT THE BOTTOM OF THE LIST.
It is really that easy.
¯\_(ツ)_/¯

Install Active Directory Domain Controller on Windows server 2008 enterprise, dont login on Sql Server 2008 R2

I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!

Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support

Install oracle E-business suite on windows 2003 server

hi ,
i am trying to install oracle EBS on windows 2003 server enterprise edition , i have installed these prerequisites :
1 - MKS Toolkit version 7.0
2 - JDK 1.3.9
3 - Visual C++ 2005 express edition
while checking the system with the startup disk , it is giving me an error :
system utilities check : - check system for make , id , ar , and cc
system utilities check : command : cmd.exe/c D:\rapidwiz\bin\checkutil.cmd C:\program files\mkstoolkit C:\program files\microsoft visual studio 8\VC
D:\rapidwiz>echo off
'which' command is not available. Check MKS installation
ERRORCODE=1 ERRORCODE_END
Error- System Utilities Availability test has returned an error: 1
anybody can help please
Regards,
Chady

What is the application release you are trying to install? Please note that 11.5.10.2 RapidWiz automatically installs JDK 1.4.2 on the Solaris, Linux, and Windows operating systems.
system utilities check : - check system for make , id , ar , and cc
system utilities check : command : cmd.exe/c D:\rapidwiz\bin\checkutil.cmd C:\program files\mkstoolkit C:\program files\microsoft visual studio 8\VCInstall all pre-req. software (i.e. Visual C++, MSK, Gnumake, ..etc) in directories which contain no space in name (i.e. C:\VC, C:\MKS, ..etc. Do NOT install it under C:\Program Files). Also, when RapidWiz prompt to enter MSK directory, type "C:\MKS\mksnt".

How to install the SAPRouter service on a Windows 2003 Server?

Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
This is fairly urgent so your assistance here would be much appreciated.
Many thanks
Sharon

I tried this and I get the following error...
'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
Any further suggestions?
S

Problem in installing Oracle 9i R2 on Windows 2003 Server Enterprise

We are having problem installing the Oracle 9i R2 Server on Windows 2003 Server Enterprise Edition. During installation, it generates error saying "The IP Address of the machine not found". When clicking the "Continue" button, it tries to install other things but few minutes later it asks to stop complete installation or installation of that feature.
But when we installed it on Windows XP it works fine and we have no problem in configuring it. What's the problem with Windows 2003 Server?
If we drop the idea of installing it on Windows 2003 Server, can we make Windows XP maching as a Server?

ORACLE asumes that the first network device you have on your server has a fixed IP address.
Is this the case?
If not so you should install a loopback adapter as network device with a fixed IP.
Does this help?
Regards,
Lutz

Error HTTP Status 500 after installing DS Management Console and IPS Services on BI Enterprise Server

The following error
HTTP Status 500 - while trying to invoke the method java.util.Properties.entrySet() of an object loaded from local variable 'globalProperties'
occurred after installing DS Management Console and IPS Services on BI Enterprise Server
BI Enterprise Edition 4.1 SP1 and BODS 4.1 SP1

Hi,
If you can't see the login screen of the CMC then it's a problem of webapps and not EIM services.
Try cleaning the Tomcat cache for the BOE webapps and let Tomcat re cache it. Often it does the job.
- Stop Tomcat
- Rename the BOE folder to BOE-OLD in C:\Program Files (x86)\SAP BusinessObjects\tomcat\work\Catalina\localhost\
- Start Tomcat
When the Tomcat process in task manager is done working (it can take 10-20 min+) then try again.
When you're done, you can delete the BOE-OLD folder.
Let me know!

Can Install & Configure Forms & Reports 11g on Windows XP SP2 (32-bit)

Hi All;
can install & configure forms & reports 11g on windows xp sp2 (32-bit)
regards

Yes, Oracle Fusion Middleware (Forms/Reports) 11g is certified for Windows XP. Check out Oracle Fustion Middleware Supported System Configuations for more information.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Windows 2003 R2 Enterprise SP2- File Share suddently no one can access. After reboot, it is back normal. Why?

We have file server, which is using windows 2003 R2 Enterprise Edition, Service Pack 2. Today suddently no one can access its file share. I try to login to the server and open services, but it is so slow to respond. I have to reboot the machine. After the
server reboot, it is back normal. Any one know why?
Here are the system errors shown before the machine rebooted. First question, I am not sure which error really causes the problem. The machine is set to use WSUS to get windows update. On the automatic updates, it is set to "Download updates
for me, but let me choose when to install them." Second question, why the machine is still trying to install update without permission? Please help. Thanks.
Event Type: Error
Event Source: Windows Update Agent
Event Category: Installation
Event ID: 20
Date:  12/13/2013
Time:  12:55:58 PM
User:  N/A
Computer: CHCDSSRV1
Description:
Installation Failure: Windows failed to install the following update with error 0xfffffbf8: Automatic Updates.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 57 69 6e 33 32 48 52 65   Win32HRe
0008: 73 75 6c 74 3d 30 78 66   sult=0xf
0010: 66 66 66 66 62 66 38 20   ffffbf8
0018: 55 70 64 61 74 65 49 44   UpdateID
0020: 3d 7b 44 36 37 36 36 31   ={D67661
0028: 45 42 2d 32 34 32 33 2d   EB-2423-
0030: 34 35 31 44 2d 42 46 35   451D-BF5
0038: 44 2d 31 33 31 39 39 45   D-13199E
0040: 33 37 44 46 32 38 7d 20   37DF28}
0048: 52 65 76 69 73 69 6f 6e   Revision
0050: 4e 75 6d 62 65 72 3d 30   Number=0
0058: 20 00                      .
Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 46
Date:  12/13/2013
Time:  1:23:58 PM
User:  N/A
Computer: CHCDSSRV1
Description:
The time service encountered an error and was forced to shut down. The error was: 0x800706BB: The RPC server is too busy to complete this operation.

Hi,
As you mentioned, users suddenly cannot access file share, the issue most likely caused by third party software, such as antivirus software. Please refer to the thread below to troubleshoot the issue:
File share become inaccessible
http://social.technet.microsoft.com/Forums/windowsserver/en-US/19205ea0-3efe-4c9c-a625-8ccf93744948/file-share-become-inaccessible?forum=winserverDS
For your second question, you can Configure Automatic Updates group policy and choose
Auto download and notify for install. This option automatically begins downloading updates and then notifies a logged-on administrative user prior to installing the updates
For more detailed information, please refer to the article below:
Configure Automatic Updates by Using Group Policy
http://technet.microsoft.com/en-us/library/cc720539(ws.10).aspx#WUS_ConfigureAutomaticUpdates
Please also refer to the article below to troubleshoot the error message:
The Windows Time service may generate event ID 7023 after you upgrade to Windows Server 2003 Service Pack 1
http://social.technet.microsoft.com/Forums/en-US/a86b4b3f-044a-499d-ba2f-d817931de6a0/windows-2003-r2-enterprise-sp2-file-share-suddently-no-one-can-access-after-reboot-it-is-back?forum=winserverfiles
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot install Web Management Gateway (KB968934) on Windows 2003 SP2 Enterprise

Similar Messages

Maybe you are looking for