Cannot link tables in Crystal Reports 2013

Hi Forum,
We upgraded to CR 2013 from old 8.5 and i cannot link tables anymore.
I disable Smart Linking and work ok now but i really don't want to keep it disable because some users are used to smart linking.
Is there a seeting or something in the registry that i can add or change to make the smart linking work?...
the error that i was getting is attached:
Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: crw32.exe P2: 14.1.5.1501 P3: 54616206 P4: StackHash_ba3d P5: 6.1.7601.18247 P6: 521ea91c P7: c0000374 P8: 000c3873 P9: P10: Attached files: These files may be available here: C:\Users\TGHAZAL\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_crw32.exe_9cb4f582e912c9a7d84acec8103b1fec3cc260e_121d946b Analysis symbol: Rechecking for solution: 0 Report Id: 9ca8bfab-e867-11e4-8ffc-904ce5e0a392 Report Status: 0
Regards,
Manuel Roman

Hi,
Rearrange links and then try.
Thanks.

Similar Messages

  • Link Tables in Crystal Report

    Hi
    I am using Crystal report2008 in SAP Business One.
    I have made links between OCRD(BP Record) and ORCT(incoming payment). I want to display BP data Opening balance as well as Incoming payment document total. It displays nothing.
    Can anyone help me how to display both in a report?
    By
    Kalai

    Hi
    Thanks for all who made efforts.
    Yes these are the only tables. Account balance from OCRD.Balances
    Invoice totals from OINV.DocTotal and Incoming payment total from ORCT.DocTotal.
    Now the issue is am getting results, But it gives repetition of vlaues
    Eg.
    A customer has 1500, 2000, 4000 of Invoice total and 1500, 2000 of Incoming payments.
    It gives results like
    Cardname OINV.DocTotal ORCT.Total
          A            1500              1500
          A            2000            
          A            4000
          A            1500              2000  
          A            2000            
          A            4000
    What will be problem, Plaz give me a solution
    By
    Kalai

  • Cannot load report from server in Crystal Reports 2013 Viewer

    Hello,
    I am having trouble opening a report that is hosted on a Crystal Reports Server (2013) from the Crystal Viewer.  I've created and uploaded the reports using the report designer (version 2013).  The reports have been uploaded using the "Save As -> Enterprise" to save to my enterprise server.  This part works fine.  I then navigated to the Crystal Reports Viewer to open my report (that I just uploaded w/ the designer) from the server.  Depending on the report, one of two things happens:
    1.) I get a loading bar at the bottom right of the screen that says "Operation in progress . . ." followed by an error message:
    Unable to Refresh Report
    A problem occurred while refreshing on the server. The report may not be configured properly for refresh.
    Please contact your server administrator. (me)
    2.) I get a loading bar at the bottom right of the screen that says "Refreshing <file name of the report> (<server name>)" followed by... nothing.  The loading bar goes away and nothing happens.  It goes back to the screen that shows when the application first loads (blank canvas).
    I've taken some basic troubleshooting steps to try and rule out any potential issues that came to mind, but I've not been successful.
    Any help would be appreciated, thanks!

    Hi
    Check the below thread
    Crystal Reports 2013 data didn't refresh using OLE DB Provider for SQL Server
    With Regards
    Balaji Sampath

  • Cannot connect Crystal Reports 2013 to ERP

    When I try to connect Crystal Reports 2013 to ERP I am getting ABAP short dump. I have imported the all needed transports. I enclosed the file with dump.

    Hi Daro,
    Did you try creating a WebI report against the same Universe?
    What is the datasource for the Universe?
    -Abhilash

  • SAP Crystal Report 2013 SP03 - Connection error with SAP ECC tables, clusters

    Hi,
    I'm trying to connect SAP Crystal Report 2013 with SAP ECC but I'm getting below error. I've read some where that We need to install SAP integration kit but SAP BI 4.1 it comes default, also had to install the ABAP cystal report transport - How to do Install this on SAP side -
    and on the ECC side we had to develop Crystal Authorization - how to develop this?
    Can someone screenshot of these steps and please suggest if something else can be done.

    Hi Pawan,
    Search for the error and you should see many threads for this issue.
    Anyway, this is what I found:
    logon failed. you do not have the necessary rights to design reports
    Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
    The wiki should have answers to all your questions regarding Transports, Authorization et al.
    -Abhilash

  • SAP Crystal Report 2013 on Windows 2012 and Lotus Notes Databases

    Hi everybody, does someone already try to use version 2013 of Crystal Report to report Lotus Notes databases content?
    We have been used older version for about 10 years without any difficulties as a native driver exist for Lotus Notes.
    But installing the version 2013, we have discovered that lotus Notes is not anymore present int the list of database to connect to...
    Can anyone provide sonme help?
    Many thank in advance
    Dominique Anderegg
    Insentia SA
    Lausanne - Switzerland
    [email protected]

    See the SAP Crystal Reports 2013 Product Availability Matrix (PAM), page 9 and download the doc linked to there. According to that doc, Lotus Notes is now only supported via ODBC only.
    Also, the search string 'lotus crystal 2013' (search box in top right corner) brings up the following KBA:
    1238167 - Cannot create new report off the Lotus Notes Domino native driver in Crystal Reports
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
      Follow us on Twitter

  • SAP tab in Crystal Reports 2013 issue

    We are using SAP Crystal Reports 2013 SP3 to build reports on BEX queries (BW 7.2). Creating a report via 'File' --> New connection --> BW MDX driver works fine, I can select bex queries & cubes and see the data. However SAP provided tab 'SAP' does not work as expected. When adding a new bex query using SAP--> Create new report from a query, I can see the list of queries and select one but it does not open and throws the following error -
    "An error occurred while generating a new report templete.
    No error"
    Using the "File" option any change to the .rpt file forces BO admin to update "DB logon" information in CMC (currently i cannot save .rpt file directly on enterprise from Crystal client due to some issue)  and we want to avoid this kind of maintainence using SAP authentication provided by using SAP tab, also the Crysal report prompts when run from BI launch pad request for prompt values twice (once for the report and once to pull list of values for each prompt) which can be avoided using SAP tab. I thought access to dev BW server is fine since the "File" tab works fine. Our BASIS team confirmed BOBJ dev servers have access to BW gateway. Am I missing something here, please help me with your experience and ideas to troubleshoot this as the only solution i could google was from a 2012 SAP recommended article to fix reginfo configuration files on SAP server
    I reinstalled Crystal Reports client twice to make sure intallation was not the issue.
    Thanks
    GORO.

    Hi Abhilash,
    Thanks for your response.
    Yes reports are working in CR 2013 designer.
    Getting Alignment and long spaces between the paragraphs issues even though report has properly designed on designer.
    After exporting to pdf getting above errors...
    -Srinivas

  • How to Create a Linked Subreport in Crystal Report for Enterprise

    Hi All
    I am developing a monthly report grouped by cost centre, I want to create a second table for each cost centre showing year to date, underneath the monthly data for that cost centre.  My thoughts on how to achieve this is to create a linked subreport in the group footer of the cost centre grouping.  However every time I try to set this up the report crashes.  Am I doing something wrong, can this be done in crystal reports for enterprise?  Can anyone give me a pointer on how to set up a linked subreport so that it passes the particular cost centre the report is grouped upon into the subreport so it only shows data relevant to that cost centre?
    Any help will be appreciated as I am going in circles at the moment.
    Thanks
    Neil
    Edited by: SmiddyLad on Feb 6, 2012 2:49 AM

    Hi Neil,
    You are doing right. You can create linked subreport in crystal report for enterprise.  Please refer below link to see the elearning tutorial  in which a simiar scenario is explained step by step. Here its an unlinked subreport. Enable subreport filter to make it linked and try. It should work.
    [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/200c56fc-5a02-2e10-36a1-ba3d28e31fc2]
    Hope it helps you.
    Regards,
    Nikhil Joy

  • Regarding Crystal Reports 2013 SP1/SP3 runtime distribution clafrifications

    Hi,
    We are in process of migrating exsisting Crystal Reports from CR 2008 SP4 to CR 2013 SP1/SP3.
    Iam unable to find the corresponding msms for the same for runtime distribution (to install on end user Boxs).
    Can see latest as v.13.0.13.1597 (_http://scn.sap.com/docs/DOC-7824)
    Please help out link where I can download msi (or msms) for Crystal Reports 2013 SP1/SP3 runtimes that need to be deployed on user PCs.
    Also need advise
    ( i ) Can we install both runtimes (CR 2008 SP4 and CR 2013 SP1) on user PC at same time? 
    ( ii ) We have already deployed CR 2008 SP4 runtimes on user PCs, is that sufficient? or do we need to install any other runtime?
    ( iii ) Will CR 2013 SP1 support old CR 2008 SP4 ?
    Thanks & Regards,
    Rajeshwar Rao

    Crystal 2013 does not come with the SDK, instead you have to download Crystal for Visual Studio  AND update your code to use it.  You can't just install one of the .msi  files or the .msm file (which are all available at the link you show above) and expect it to work with existing code.
    -Dell

  • Modify SQL query in Crystal Reports 2013

    Bonjour,
    Je voulais savoir s'il était possible de modifier la requête SQL dans Crystal Reports 2013, car les bases de données de notre application pour bibliothèque utilise un format de date particulier qu'il nous faut corriger directement dans la requête SQL.
    Merci pour vos informations.
    Cordialement
    Claude Marcilly
    Cannes - France
    Hello,
    I wanted to know if it was possible to modify the SQL query in Crystal Reports 2013. Databases of our application library indeed use a particular date format that we need to fix directly into the SQL query.
    Thank you for your information.
    Best regards
    Claude Marcilly
    Cannes - France

    Hi Claude,
    If you are creating reports using tables then go in Database menu and click on show SQL query, this will show the SQL generated by crystal reports.  Now go in database expert and expend your connection and double click on Add Command and past the query which was generated by Crystal and try to modify the date format and click OK.
    Now you need to redesign your reports based on Add command.
    or
    If your reports datasource is Add command you can directly go in add command and change it.
    -Sastry

  • Make CFL for user defined tables in Crystal Report 8.8 ?

    Hi Experts
    Use Follwing qry for CFL ( user defined tables) in Crystal Report But its not Show CFL after run the Report in SAP B1 8.8
    Period@Select T0.*  from @OICC T0
    Thanks & Regards
    Dinesh Lade

    Hi,
    As far as i know, SBO can't figure out in such instance what are you doing, try linking it to an original table.
    I usually use OADM for this purpose.
    Hope this helps.
    Regards,
    Daniel

  • How to Save/Transport Crystal Reports 2013 reports in ECC (not BW)

    Hi,
    we are using Crystal Report 2013 and have reports which are based on ALV´s and SAP Tables directly.
    I want to know if it´s possible to save the reports directly in the ECC system, with transport connection etc. and maybe the possibility to translate the reports later in another language.
    I know the way when we have reports based on a BW system, there it is really easy and integrated.
    But in this case we are on a normal ECC System, not a BW Enviroment.
    At the moment we have the report rpt files locally.
    Has someone already done this and or knows a tutorial what steps are to do? (connection, package, roles)
    Kindly regards
    Max

    Hi Max,
    Please have a look at this document from Tammy Powlas.
    -Abhilash

  • Desgin a smple table in Crystal reports

    Hi,
    I am trying to design a simple table in crystal reports 2008. like this
    |__________________________|____________________________|
    |__________________________|____________________________|
    |__________________________|____________________________|
    |__________________________|____________________________|
    is there  a way to do it without trying to arange each field for hours?
    And when viewing in the crstyalviewer (winforms) (for VS2010) kills once again all formatting and looks terrible.
    Please help
    Edited by: sadenick on Feb 18, 2011 5:11 PM

    As I read this post, I see two queries.
    1) report design in CR 2008
    2) formatting issue when using the report in VS2010
    The former question shoud be posted to the [SAP Crystal Reports Design|SAP Crystal Reports, version for Visual Studio;
    For the latter; what version of CR are you using in VS2010?
    and
    "...formatting and looks terrible" does not tell me much. A picture is worth a thousand words and more in this case. Please provide a link to a screen shot of what you expect and what you get.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • How to configure crystal report 2013 with oracle 11g

    hey all,
         i download trial version SAP Crystal Report 2013 and i have Database with 11g and i want to connect with my database and try to develop reports
    but my issue is that i'm not able to connect with database. Can anyone please help to connect with database.
    i am new be with oracle database so it will help me if any one go thru step by step or any link,

    Hi Sandip,
    All you need is a 32-bit Oracle driver to be installed on the machine you're developing the reports on.
    If you already have both the 64-bit and the 32-bit drivers, make sure the Path variable under 'system variables' points to the 32-bit home.
    You can then either create an ODBC DSN or use the 'Oracle Server' native driver that shows under 'Database Expert' to create the report.
    -Abhilash

  • How to connect crystal report 2013 using sap business one data source

    hello Professionals .
    when i try to use data source sap b1 in crystal report 2011 or 2013 i got no list in company database,
    when i try to write it manual i got error "Connection failed".
    I tried to connect OLE DB and ODBC all work fine with me.
    i attached some snapshots .
    Any Advice Please ?

    Hi Mohamed,
    Please check below link.
    SAP Crystal Reports 2011/2013 doesn't show Company Data Base
    SAP Business One Data Source in Crystal
    Crystal Reports - How To - Connecting to your SAP Database - YouTube
    Migrating Crystal Reports of SAP Business One from SQL Server to SAP HANA
    Hope this helps
    Regards::::
    Atul Chakraborty

Maybe you are looking for