Cannot load mod_bonjour.so in apache2

* I am running apache2 on tiger. I copy mod_bonjour.so from /private/....(cant remember) to /opt/local/apache2/modules/
* sudo apachectl restart, then it cannot find the mod_bonjour.so. Error: no such symbol...
* I assume I need to recompile the mod_bonjour with apache2 or something
any idea?

I have the same problem. It seems some of the modules are not available.
Dani

Similar Messages

Cannot Connect to Oracle, PHP cannot load oci dlls

Hello,
I have installed wamp on windows server, and oracle 9, When I try to connect to oracle in php I get:
Fatal error: Call to undefined function oci_connect() in C:\wamp\www\project2\index.php on line 3
Also when I start wamp, it cannot load the oci dlls found on:
C:\wamp\bin\php\php5.3.0\ext
I have configured the php.ini file and commented as much options
extension_dir = "C:/wamp/bin/php/php5.3.0/ext/"
extension=php_oci8.dll ; Use with Oracle 10gR2 Instant ...
extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
extension=php_oracle.dll
extension=oci8.so
I am unable to either connect to the database through php, also when I start wamp, i get pop up windows that it cannot load the dynamic procedures related to oracle: php_oce.dll, php_oce8.dll, php_pdo_oci,
I have even eddited the http.conf file
Also have done this:
•Add the following entries to the "C:\Apache\Apache\conf\httpd.conf" file:
LoadModule php4_module c:\php\sapi\php4apache.dll (approx line 193)
AddModule mod_php4.c (approx line 241)
AddType application/x-httpd-php .php (approx line 851)
I have included the phpinfofile attached as well, part of it below is:
System Windows NT SELECAO 5.2 build 3790 (Windows Server 2003 Standard Edition Service Pack 2) i586
Build Date Jun 29 2009 21:23:30
Compiler MSVC6 (Visual C++ 6.0)
Architecture x86
Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--disable-isapi" "--enable-debug-pack" "--with-pdo-oci=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=D:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared"
Server API Apache 2.0 Handler
Virtual Directory Support enabled
Configuration File (php.ini) Path C:\WINDOWS
Loaded Configuration File C:\wamp\bin\php\php5.3.0\php.ini
Configuration
apache2handler
Apache Version Apache/2.2.11 (Win32) PHP/5.3.0
Apache API Version 20051115
Server Administrator admin@localhost
Hostname:Port localhost:80
Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100
Timeouts Connection: 300 - Keep-Alive: 5
Virtual Server No
Server Root C:/wamp/bin/apache/Apache2.2.11
Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_dir mod_env mod_include mod_isapi mod_log_config mod_mime mod_negotiation mod_setenvif mod_php5

I get this error, i decided to change directory for oracle_home
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1/bin");
to
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1");
it functioned.
my code
<?php
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1");
putenv("ORACLE_SID=PLSExtProc");
$user ="name"; // set user
$senha="password"; // set password
$banco="(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)
(HOST=127.0.0.1)(PORT=1521)
(CONNECT_DATA=(SERVICE_NAME=orcl))
)"; // configuracoes do banco (isso muda um pouco no oracle)
if ($conexao = OCILogon($user,$senha,$banco))
echo "Conexão bem sucedida.";
else
echo "Erro na conexão com o Oracle.";
?>

Apache cannot load mod_jk.so

Wondering if anyone has bumped into this?
I did a vanilla install of cf10 on mac 10.5.8 on top of the mac-installed apache webserver (i.e. the one that comes stock with the OS, not a macports version or custom compile) ... a few vhosts are defined. cf9 is already installed and working peachy. Install goes fine but the 'switch to the web admin' stage fails and the webserver doesn't restart. Running an apache configtest barfs out the following;
Syntax error on line 509 of /private/etc/apache2/httpd.conf: Syntax error on line 2 of /private/etc/apache2/mod_jk.conf: Cannot load /Applications/ColdFusion10/config/wsconfig/1/mod_jk.so into server: dlopen(/Applications/ColdFusion10/config/wsconfig/1/mod_jk.so, 10): no suitable image found. Did find:\n\t/Applications/ColdFusion10/config/wsconfig/1/mod_jk.so: unknown required load command 0x80000022
Commenting out the httpd.conf include to mod_jk.conf allows the webserver to start up again.
I've read that the mac hack of apache webserver includes 'apxs' in a manner that won't compile correctly but I'm a bit out of my depth with the apache stuff. Any ideas would be really appreciated

I compiled mod_jk from source, pointed the mod_jk.conf at this, retstarted apache and this time got a clean configtest, However, I'm still but unable to get the webserver to respond, despite it retsarting okay

Using Firefox to access facebook chat Button or online friiend chat button generates a Black screen with CANNOT LOAD IMAGES and no chat window opens.

This does not happen in other browsers and it happens on a variety of computers I have access to and would seem to be a common problem but I can find no identical cases in my searches of
Firefox , Facebook or windows help or Google search. My home machine is only a P2 with WINXPCORP but works fine and I have done all updates but still have this continuing problem every time I try to use Firefox
to access Facebook chat but it does not happen with IE or chrome
The response to clicking on chat button or friend chat is a black screen with small center square box with blue title bar that says
'' VIEW IMAGE FULL SCREEN - (42) FACEBOOK X""
center of box is ""! "" mark in yellow triangle and wording
"" CANNOT LOAD IMAGES ''' OK
clicking on OK returns to facebook page but no chat opens.
Some times |VERY RARLEY if as the page loades you click on
chat button with 1/2 second of it appearing chat will open.

Hi,
Please also see [https://support.mozilla.org/en-US/kb/Problems%20using%20Facebook%20in%20Firefox this.]

Error while starting essbase after Installation: Cannot load $DM_APP$

Hi,
I have installed Essbase on solaris. After installation when I start Essbase it started successfully but with an error:
[Mon Sep 19 09:52:22 2009]Local/ESSBASE0///Error(1052003)
Timed out reading from server
[Mon Sep 19 09:52:22 2009]Local/ESSBASE0///Error(1054001)
Cannot load application $DM_APP$ with error number [1052003] - see server log file
[Mon Sep 19 09:52:22 2009]Local/ESSBASE0///Warning(1051221)
Creation of Datamining Object Management Application Fails with status [1054001]
I have verified all the evnironment variables they are set correctly same as one of our other environments.
I would really appreciate if some can help me troubleshoot this.
Thanks and Regards,
Vamshi

Finally Found that the JVM path is set inccoretly.This should be the path to be set: $HYPERION_HOME/common/JRE/Sun/1.5.0/lib/sparc/server
Thanks and Regards,
Vamshi

Error message: Cannot load the rpt file

Can anyone please help.
I created a Crystal Report which I deployed into Business One. Tested this report on about 13 machines running Business One and all running well except one machine where it comes up with the following error messages:
1: Cannot load the rpt file
2: Object reference not set to an instance of an object
3: Invalid report file path
I have tried logging into Business One on that machine as a different user and encountered the same issue. Then logged onto another machine as the user who uses the machine with the error message and her profile works well on another machine.
This is leaving me with concluding this problem could be down to the machine but cannot figure out how to fix it.
Does anyone have any ideas to solving this?
Thanks
Tony

Hi Tony,
On the troubled computer, check in Control Panel whether Crystal Report Runtime is installed. If not, un-install client app and re-install from B1_Shr client's folder. The first thing that it will do is to instal Crystal Report Runtime.
Source: when I did an upgrade on a client recently this happened. After troubleshooting everything I found that this issue is a hit-and-miss as some PCs had it some don't. I started comparing between working and non-working PC and found this is the only difference I could found.

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

Internal error, cannot load engine Number 2 due to error 5

I have had a StartStop transcription program for several years. I bought my Dell computer with Windows 8 (now 8.1) in late 2014. I had no problems running the StartStop program until it got a tune-up by my regular tech. Since then, when I click to
open it, I get the message: "##### Internal error, cannot load engine Number 2 due to error 5." My tech couldn't figure it out and another tech couldn't fix it either after looking at it for hours. StartStop could not figure it out either.
Since then, I bought a Digitope digitalizer, which converts cassette tapes to CD's. When I try to open that program the exact same error message comes up!
So I am thinking there is something awry with certain audio programs. I am able to run another transcription program, Express Scribe.
Any thoughts!
The 2nd tech suggested rebooting the entire computer and reinstalling all programs, but I'm not sure I can find all my original programs.
Thanks!

Hello Silent Fisher,
What StartStop transcription program do you mean?
Please share me a screenshot.
If it is a third-party software, it is recommended to contact the support of the software.
If the issue occurs after your change, please use the system restore to restore your computer’s system files to an earlier point in time.
http://windows.microsoft.com/en-HK/windows-8/restore-refresh-reset-pc
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I rented a film on my iPad but when I try and watch it I get a message 'cannot load video' as soon as I get to around 15 minutes. The film is fully downloaded and paid for.

I Rented the film inhale on my iPad a few nights ago, this is not the first time I've rented from I turnes, I've don't it many times before and never had any problems. This time I cannot get the film to load. Every time I try to play the video it comes up with a message saying 'cannot load video' as soon as I reach around 15 minutes of the movi. and then shuts the video down. I'm annoyed because having got 15 minutes in my film will now expire in 48 hours even though I can't actually watch it. I'd like to see it tonight if anybody can help please, thanks.

Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
Using current version IPad mini.
Ios7 is HUGH PIECE OF CRAP!!!!

MDB cannot loads enitities if more than 10 concurrent messages are sent tog

Hello,
I have seen a weird behavior of the MDB in Jboss or perhaps in transaction management.
Here is a my scenario
I have a session bean sb, an entity bean e and a message driven bean mb
When a request comes to sb , it persists a new entity e and send a message (primary key) to mb
mb then loads e from the database using one of the findByXX method and does something else.
If 10 concurrent request comes to sb, 10 different entities are persisted and 10 different messages are sent to mb
mb are able to load 10 different e from the database
Everything works fine as long as there are 10 concurrent request. If there are 13 concurrent request, then one or two mb
cannot load e from the database. It seems that the session bean has persisted the entities but some of them are still unload able from mb. They have been persisted , (I saw in the logs), but mb cannot load them.
Initially I thought that a transaction mishap might be happening, so instead of persisting the entity and sending the message in one method in sb , I separated these two tasks in two methods a and b, in which both a and b uses RequiresNew transaction attribute. But the problem still remains. Please note if the number of parallel request are less than 10 then everything works fine. Is there something I am missing or is Jboss doing something buggy?
The above situation is reproducible .
Here is some more information about the problem along with some code snapshots. Note that the code is trimmed for clarity purposes.
Request is a simple entity (e as mentioned in the problem before) that is persisted in session bean . Here is a trimmed snapshot
Request.java
package gov.fnal.ms.dm.entity;
import java.io.Serializable;
import javax.persistence.Column;
import javax.persistence.Entity;
@Entity
@NamedQueries({@NamedQuery(name = "Request.findById", query = "SELECT r FROM Request r WHERE r.id = :id"),
@NamedQuery(name = "Request.findAll", query = "SELECT r FROM Request r"),
@Table(name = "cms_dbs_migration.Request")
@SequenceGenerator(name="seq", sequenceName="cms_dbs_migration.SEQ_REQUEST")
public class Request implements Serializable {
private String detail;
@Id
@GeneratedValue(strategy = GenerationType.AUTO, generator="seq")
@Column(nullable = false)
private Long id;
private String notify;
.....The session bean is MSSessionEJBBean.
MSSessionEJBBean.java
@Stateless(name="MSSessionEJB")
@WebService(endpointInterface = "gov.fnal.ms.dm.session.MSSessionEJBWS")
public class MSSessionEJBBean implements MSSessionEJB, MSSessionEJBLocal, MSSessionEJBWS {
@PersistenceContext(unitName="dm")
private EntityManager em;
.......    The methods that is called concurrently in this bean is
@TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
public Request addRequest(String srcUrl, String dstUrl, String path,
String dn, String withParents, String withForce, String notify) throws
Exception {
Request r = addRequestUnit(srcUrl, dstUrl, path, dn, withParents, withForce, notify);
if (r != null) sendToQueue(r.getId());
return r;
}    It first adds the request entity and then sends a message to the queue in separate methods each using TransactionAttributeType.REQUIRES_NEW (I don't think this TransactionAttributeType is needed . I was just playing to see if this resolves the problem)
Here is the method that actually persist the entity
@TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
public Request addRequestUnit(String srcUrl, String dstUrl, String path,
String dn, String withParents, String withForce, String notify) throws
Exception {
....// Does something before persisting
Request r = new Request();
r.setNotify(notify);
r.setPath(path);
r.setPerson(p);
r.setWithForce(withForce);
r.setWithParents(withParents);
r.setProgress(new Integer(0));
r.setStatus("Queued");
r.setDetail("Waiting to be Picked up");
em.persist(r);
System.out.println("Request Entity persisted");
System.out.println("ID is " + r.getId());
return r;
}I can see that the log files has messages
*{color:#800000}"Request Entity persisted" "ID is " 12 (or some other number){color}*
. So it is safe to assume that the request entity is persisted properly before the message is sent to the queue. Here is how the message is sent to the queue
@TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
private void sendToQueue(long rId) throws Exception {
QueueSession session = null;
QueueConnection conn = null;
try {
conn = factory.createQueueConnection();
session = conn.createQueueSession(false, QueueSession.AUTO_ACKNOWLEDGE);
MapMessage mapMsg = session.createMapMessage();
mapMsg.setLong("request", rId);
session.createSender(queueRequest).send(mapMsg);
} finally {
if (session != null) session.close();
if(conn != null) try {
conn.close();
}catch(Exception e) {e.printStackTrace();}
System.out.println("Message sent to queue");
}I can see the message
{color:#800000}*"Message sent to queue"*{color}
in the log file right after I see the
*{color:#800000}
"Request Entity persisted"{color}*
message. So it correct to assume that the message is infact sent to the queue.
Here is the md bean that gets the message from the queue and process it
@MessageDriven(activationConfig =
@ActivationConfigProperty(propertyName="destinationType",
propertyValue="javax.jms.Queue"),
@ActivationConfigProperty(propertyName="destination",
propertyValue="queue/requestmdb")
public class RequestMessageDrivenBean implements MessageListener {
@EJB
private MSSessionEJBLocal ejbObj;
public void onMessage(Message message) {
try{
System.out.println("Message recived ");
if(message instanceof MapMessage) {
System.out.println("This is a instance of MapMessage");
MapMessage mMsg = (MapMessage) message;
long rId = mMsg.getLong("request");
List<Request> rList = ejbObj.getRequestById(new Long(rId));
System.out.println("rList size is " + rList.size());
for(Request r: rList) {
//Does something and print something in logs
System.out.println("Finsihed onMessage");
}catch(Exception e) {
System.out.println(e.getMessage());
}    One thing to note here is that getRequestById is another method in the same session bean MSSessionEJB. Can that be the reason for not loading the request from the database when many concurrent request are present? Here is what it does
@TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
public List<Request> getRequestById(Long id) throws Exception {
System.out.println("Inside getRequestById id is " + id);
return em.createNamedQuery("Request.findById")
.setParameter("id", id)
.getResultList();
}    In the logs I do see
{color:#800000}*"This is a instance of MapMessage"*{color}
and I do see the correct Rid that was persisted before in the log
*{color:#800000}
"inside getRequestById id is 12"{color}*
. Finally I do see
*{color:#800000}
"Finsihed onMessage"{color}*
for all the request no matter how many are sent concurrently.
*{color:#ff0000}Here is where the problem is . rList size is 1 for most of the cases but it returns 0 when the number of concurrent message exceeds 10.*
*{color}*
So you see there is no exception per se, just that entity does not get loaded from the database. I would like to mention this again, it does work properly when the number of concurrent request are less than 10. All the invocation of onMessage in MB are able to load the entity properly in that case. Its only when the number of concurrent request increases more than 10, the onMessage is unable to load the entity and the rList is 0.
FYI I am using jboss-4.2.2.GA on RedHat enterprise linux 4 with jdk1.6.0_04
Please let me know if there is more information required on this.
Thank you

Hello,
I have seen a weird behavior of the MDB in Jboss or perhaps in transaction management.
Here is a my scenario
I have a session bean sb, an entity bean e and a message driven bean mb
When a request comes to sb , it persists a new entity e and send a message (primary key) to mb
mb then loads e from the database using one of the findByXX method and does something else.
If 10 concurrent request comes to sb, 10 different entities are persisted and 10 different messages are sent to mb
mb are able to load 10 different e from the database
Everything works fine as long as there are 10 concurrent request. If there are 13 concurrent request, then one or two mb
cannot load e from the database. It seems that the session bean has persisted the entities but some of them are still unload able from mb. They have been persisted , (I saw in the logs), but mb cannot load them.
Initially I thought that a transaction mishap might be happening, so instead of persisting the entity and sending the message in one method in sb , I separated these two tasks in two methods a and b, in which both a and b uses RequiresNew transaction attribute. But the problem still remains. Please note if the number of parallel request are less than 10 then everything works fine. Is there something I am missing or is Jboss doing something buggy?
The above situation is reproducible .
Here is some more information about the problem along with some code snapshots. Note that the code is trimmed for clarity purposes.
Request is a simple entity (e as mentioned in the problem before) that is persisted in session bean . Here is a trimmed snapshot
Request.java
package gov.fnal.ms.dm.entity;
import java.io.Serializable;
import javax.persistence.Column;
import javax.persistence.Entity;
@Entity
@NamedQueries({@NamedQuery(name = "Request.findById", query = "SELECT r FROM Request r WHERE r.id = :id"),
@NamedQuery(name = "Request.findAll", query = "SELECT r FROM Request r"),
@Table(name = "cms_dbs_migration.Request")
@SequenceGenerator(name="seq", sequenceName="cms_dbs_migration.SEQ_REQUEST")
public class Request implements Serializable {
private String detail;
@Id
@GeneratedValue(strategy = GenerationType.AUTO, generator="seq")
@Column(nullable = false)
private Long id;
private String notify;
.....The session bean is MSSessionEJBBean.
MSSessionEJBBean.java
@Stateless(name="MSSessionEJB")
@WebService(endpointInterface = "gov.fnal.ms.dm.session.MSSessionEJBWS")
public class MSSessionEJBBean implements MSSessionEJB, MSSessionEJBLocal, MSSessionEJBWS {
@PersistenceContext(unitName="dm")
private EntityManager em;
.......    The methods that is called concurrently in this bean is
@TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
public Request addRequest(String srcUrl, String dstUrl, String path,
String dn, String withParents, String withForce, String notify) throws
Exception {
Request r = addRequestUnit(srcUrl, dstUrl, path, dn, withParents, withForce, notify);
if (r != null) sendToQueue(r.getId());
return r;
}    It first adds the request entity and then sends a message to the queue in separate methods each using TransactionAttributeType.REQUIRES_NEW (I don't think this TransactionAttributeType is needed . I was just playing to see if this resolves the problem)
Here is the method that actually persist the entity
@TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
public Request addRequestUnit(String srcUrl, String dstUrl, String path,
String dn, String withParents, String withForce, String notify) throws
Exception {
....// Does something before persisting
Request r = new Request();
r.setNotify(notify);
r.setPath(path);
r.setPerson(p);
r.setWithForce(withForce);
r.setWithParents(withParents);
r.setProgress(new Integer(0));
r.setStatus("Queued");
r.setDetail("Waiting to be Picked up");
em.persist(r);
System.out.println("Request Entity persisted");
System.out.println("ID is " + r.getId());
return r;
}I can see that the log files has messages
*{color:#800000}"Request Entity persisted" "ID is " 12 (or some other number){color}*
. So it is safe to assume that the request entity is persisted properly before the message is sent to the queue. Here is how the message is sent to the queue
@TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
private void sendToQueue(long rId) throws Exception {
QueueSession session = null;
QueueConnection conn = null;
try {
conn = factory.createQueueConnection();
session = conn.createQueueSession(false, QueueSession.AUTO_ACKNOWLEDGE);
MapMessage mapMsg = session.createMapMessage();
mapMsg.setLong("request", rId);
session.createSender(queueRequest).send(mapMsg);
} finally {
if (session != null) session.close();
if(conn != null) try {
conn.close();
}catch(Exception e) {e.printStackTrace();}
System.out.println("Message sent to queue");
}I can see the message
{color:#800000}*"Message sent to queue"*{color}
in the log file right after I see the
*{color:#800000}
"Request Entity persisted"{color}*
message. So it correct to assume that the message is infact sent to the queue.
Here is the md bean that gets the message from the queue and process it
@MessageDriven(activationConfig =
@ActivationConfigProperty(propertyName="destinationType",
propertyValue="javax.jms.Queue"),
@ActivationConfigProperty(propertyName="destination",
propertyValue="queue/requestmdb")
public class RequestMessageDrivenBean implements MessageListener {
@EJB
private MSSessionEJBLocal ejbObj;
public void onMessage(Message message) {
try{
System.out.println("Message recived ");
if(message instanceof MapMessage) {
System.out.println("This is a instance of MapMessage");
MapMessage mMsg = (MapMessage) message;
long rId = mMsg.getLong("request");
List<Request> rList = ejbObj.getRequestById(new Long(rId));
System.out.println("rList size is " + rList.size());
for(Request r: rList) {
//Does something and print something in logs
System.out.println("Finsihed onMessage");
}catch(Exception e) {
System.out.println(e.getMessage());
}    One thing to note here is that getRequestById is another method in the same session bean MSSessionEJB. Can that be the reason for not loading the request from the database when many concurrent request are present? Here is what it does
@TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
public List<Request> getRequestById(Long id) throws Exception {
System.out.println("Inside getRequestById id is " + id);
return em.createNamedQuery("Request.findById")
.setParameter("id", id)
.getResultList();
}    In the logs I do see
{color:#800000}*"This is a instance of MapMessage"*{color}
and I do see the correct Rid that was persisted before in the log
*{color:#800000}
"inside getRequestById id is 12"{color}*
. Finally I do see
*{color:#800000}
"Finsihed onMessage"{color}*
for all the request no matter how many are sent concurrently.
*{color:#ff0000}Here is where the problem is . rList size is 1 for most of the cases but it returns 0 when the number of concurrent message exceeds 10.*
*{color}*
So you see there is no exception per se, just that entity does not get loaded from the database. I would like to mention this again, it does work properly when the number of concurrent request are less than 10. All the invocation of onMessage in MB are able to load the entity properly in that case. Its only when the number of concurrent request increases more than 10, the onMessage is unable to load the entity and the rList is 0.
FYI I am using jboss-4.2.2.GA on RedHat enterprise linux 4 with jdk1.6.0_04
Please let me know if there is more information required on this.
Thank you

Error while creating database - Cannot load backend library 'oci.dll'

Hi all,
I am newbie to Timesten imdb (in memory database). I do not wish to use oracle rdbms.
I have installed the Timesten IMDB on Win2003.
E:\TimesTen\tt70_32\bin>ttVersion.exe
TimesTen Release 7.0.5.0.0 (32 bit NT) (tt70_32:17000) 2008-04-05T00:54:16Z
Instance admin: m4sadm
Instance home directory: e:\TimesTen\tt70_32
Daemon home directory: e:\TimesTen\tt70_32\srv\info
While installing, I followed the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_install_win_viewlet_swf.html]
Now, I am planning to create a database, and so following the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_create_db_win_cc_viewlet_swf.html]
However, when I give the command (according to the viewlet), I get the following error:
Command> select * from v$version;
5102: Cannot load backend library 'oci.dll' for Cache Connect. OS error message '<empty>'.
The command failed.
Can anyone provide pointers to resolve this?

I'm guessing you chose No to the install question about using Cache Connect to Oracle? This would cause certain libraries not to be installed at install time, specifically libraries that would enable you to use TimesTen Cache Connect to cache data from Oracle tables.
The table "v$version" that you use in your select
select * from v$version
only exists on an Oracle RDBMS. It doesn't exist on TimesTen. Moreover the second viewlet you refer to is about using the TimesTen Cache Connect feature to cache tables from Oracle RDBMS. If you're not interested in using Oracle RDBMS, as you say, it would be my assumption that you're also not interested in using the TimesTen Cache Connect feature? So I'm a little confused here about your intentions. Are you interested in using TimesTen as a standalone datastore, or do you want to use it to cache data from tables located in an Oracle RDBMS?
Thanks.

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Error while invoking onHeartBeat() method, exception is "Cannot load header

I have a problem that when I read out an IMAP mailbox I sometimes get the above problem, and sometimes I don't get the problem.
Below I attached the main parts of my environment to get an insight within the code:
bpel.xml of process that is reading out the IMAP mailbox
<activationAgents>
<activationAgent className="com.collaxa.cube.activation.mail.MailActivationAgent"
heartBeatInterval="60">
<property name="accountName">account</property>
</activationAgent>
account.xml
<mailAccount xmlns="http://services.oracle.com/bpel/mail/account">
<userInfo>
<displayName>Eneco Process lAyer</displayName>
<organization>iFactory</organization>
<replyTo>[email protected]</replyTo>
</userInfo>
<outgoingServer>
<protocol>smtp</protocol>
<host>10.126.16.73</host>
<port>25</port>
<authenticationRequired>false</authenticationRequired>
</outgoingServer>
<incomingServer>
<protocol>imap</protocol>
<host>10.126.20.8</host>
<port>143</port>
<email>IFACAORTA</email>
<password>CRYPT{IB3B7SrA3kMYHoBDzWwsEg==}</password>
<folderName>InBox</folderName>
</incomingServer>
</mailAccount>
The domain.log of the appserver
<2006-12-04 15:08:25,546> <ERROR> <default.collaxa.cube.activation> <HeartBeatListenerJob::execute> Error while invoking onHeartBeat() method, exception is "Cannot load header".
<2006-12-04 15:08:25,562> <ERROR> <default.collaxa.cube.activation> <HeartBeatListenerJob::execute> Error while invoking onHeartBeat() method, exception is "No content".

This problem is occuring only on BPEL release 10.1.3.
I retested this again on BPEL 10.1.2, but there the problem did not occur.

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
You can get 10.6.8 here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Cannot load mod_bonjour.so in apache2

Similar Messages

Maybe you are looking for