Cannot open certain Numbers '09 files

I have just upgraded all the macs in my company with 14 brand new iMac and a MacPro as server.
All the iMacs are updated to latest Yosemite (10.10.1) and latest Numbers application.
I'm not able to open some Numbers '09 files on the new iMac while some others open without any problem.
On an old Mac with 10.7 these files open and saves correctly with Numbers '09.
The only workaround I found is to export it to excel from Numbers '09 and then import it in the new Numbers (loosing all the formatting typical for Numbers document as tables inside a sheet).
This is not acceptable since I have too much document to convert to new format.
Does anyone had my same problem?
Does anyone with my same problem found a solution (not a workaround)?
Awaiting any suggestion.
Thank to anyone could help.

Dear Badunit,
thank you for your reply.
Numbers tell that's impossible to open the file while Numbers '09 opens without any problem.
Don't have any doubt about what i'm doing; i'm a system master and mac user since 1989.
For being more specific: these files are on a raid 5 datastore connected to a MacPro with Yosemite 10.0.1 and Server 4.0.3 and connected through thunderbolt.
I've tried to:
- open through the network as network user logged in SMB or AFP
- copied locally as administrator user of the iMac
- tried to open in pacifist to have a look if i could open the data fork
None of these solved the problem; i suppose there a function or a formatting i used in these files that are not compatible with the new Numbers and prevent it to be opened but the error message is too generic and i didn't find up to now any advise of incompatibility; seems that everything should go strait but this isn't happening for me.
I enclose here the message i have:
Awaiting any help. Thanks.

Similar Messages

  • Cannot open older Numbers files since update

    Cannot open any Numbers files that were created before an update, but can create new files, close them, and reopen them. When I try to open the file it says "Numbers quit unexpectedly. Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple." I've sent reports to Apple several times, and have installed all updates that are available. I noticed this problem before I updated my other computer and can still open the files on that computer.

    Hello
    It seems that something works sadly because you aren't the first one with this problem which I already reported to Apple.
    May yo pack one or two sample files as .zip archive
    create a "System profile"
    attch both of them to a mail and send it to:
    koenig PERIOD yvan AT tele2 PERIOD fr
    I would be able to look if I may revive your file or send it to Apple's bugs hunters.
    Yvan KOENIG (from FRANCE lundi 10 mars 2008 09:46:32)

  • HT1338 i cannot open my numbers spreadsheet on my mac after downloading the latest numbers update.

    I cannot open my numbers spreadsheet after downloading the lastest version of numbers on my mac.  help.

    Same here. I'm able to open the files on my iPad but this is not acceptible.
    Files are located on iCloud and the previews show up when sellecting the files
    I really want to drink the kool-aid but getting more and more tempted to just load Office and be done with iWork

  • TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

    Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
    Please!
    Thanks!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Cannot open .xls or .doc files

    I have office 2008 updated to the latest version operating on a mac osx 10.5.8. I cannot open xls or doc files. I get the messages "file cannot be opened" and "file blocked".
    Have tried
    - opening via right click and through the programs themselves
    - installing updates
    Any suggestions welcome.

    Hello,
    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office. Please post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums
    Good luck...

  • I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

    I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Kernel Upgrade Error :Cannot open or remove a file containing a running prg

    Hello All,
    I have installed ECC 6.0 on DB2 /AIX and now trying to apply Kernel Patch 75 but after Uncar of SAR files and moving the same to EXE (/sapmnt/PRD/exe) I am nota ble to copy few files, Follwoing error is coming.
    As a reuslt of this error Dispatcher is not starting in PRD.
    cp -p /sapinstdir/kernelpatch/indep/dw_gui.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_gui.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/libregex.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/libregex.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/db/dbdb6slib.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dbdb6slib.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/dw_stl.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_stl.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/dw_xml.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_xml.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/dw_xtc.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_xtc.o: Cannot open or remove a file containing a running program.
    Plesae help me to resolve this issue.
    Regards & Thanks,
    Ankita.

    Hi All,
    When a shared library with read-other permission is loaded, it remains loaded (and available) even if no processes are currently using it. This allows faster execution, but may result in a message like "Cannot open or remove a file containing a running program" on installs or rebuilds of application libraries.
    Refer to the man page for subroutine dlopen and command slibclean.
    Regards,
    Mukul SHarma

  • Mac OS 10.9.4 cannot open the NEF/RAW files from the new Nikon D810 Camera

    I have a new Nikon D810 camera. My new iMac cannot open the NEF/RAW files from it...Anyone have any knowledge of this?

    If you will take the time to send Apple feedback, they will add RAW support - when I got my Canon, it wasn't supported either. I filed feedback and, two months, later, there was an update which included my camera model.
    http://www.apple.com/feedback/macosx.html

  • Error Happened at RFC Server Cannot Open the Job Batch File.

    We have BW 7.0  and Data services 12.1. We are scheduling a Infopackage in BW that triggers a job in Dataservices server.
    We had checked the connection between Dataservices source system in BW and RFC server on Dataservices side and these connections are good. on the 3rd party sellections tab in infopackage we specify the batch file name that we exported in Dataservices server. When we execute the infopackage we get the following error.
    Error Happened at RFC Server Cannot Open the Job Batch File.
    This error started occuring from yesterday and prior to that it was working fine. We are not understanding what changed in the system to cause this error.
    Can anyone suggest any solutions for the above issue.
    Thanks,
    Naveen.

    I'm not sure what the root cause would be here. Is the file still available ? Did file permissions change ? ...
    But I wanted to point your attention to the fact that in Data Services/Data Integrator XI 3.2 (=12.2) we significantly enhanced the integration with BW. In XI 3.2, the RFC server is now integrated into the Data Services Management Console (so no need to start as a seperate executable) and you can start jobs from BW by just specifting the job's name in the repo (no need anymore to export execution commands to .bat files). So if upgrading to XI 3.2 is an option, things should go much smoother.
    More details on the wiki  : http://wiki.sdn.sap.com/wiki/display/BOBJ/Loading+BW
    Thanks,
    Ben.

  • Cannot open a downloaded pdf file..."The file couldn't be opened because it isn't in the correct format."

    I have had this problem several times lately: I cannot open a downloaded pdf file. The error message reads: "The file couldn't be opened because it isn't in the correct format." But, of course, it is a pdf file.

    My MacBook Pro (2.5 Ghz Intel Core i5) is running OS X 10.9.4. Here is what happens when reading an online user manual that I want to save to the Desktop and read later as a PDF file on my iPad or phone. With Safari I will select "Export As PDF" and the file shows up on the desktop. Even after multiple trials, there will be a dialogue box indicating the file cannot be opened. If I check the file info, the size is "zero." Trying to save the file as a pdf using the Print menu yields the same results. I have tried both of these methods using Preview, Adobe Reader, and PDF Pen Pro. This strange behavior also occurred several weeks ago and I finally abandoned the effort. But when the same thing happens twice, it becomes an issue that needs to be resolved.

  • I cannot open all email attachment files(pdf, doc, etc) in Mail on my New IPad.

    I cannot open all email attachment files(pdf, doc, etc) in Mail on my New IPad. I installed all viewer apps but I am not able to click and hold to select the option of viewer apps to open the files. I dont get the "open with" option when I click on the arrow in the menu bar. I can open attachment files on G-mail website from Safari though. It is really ridiculous that I cannot open the files from Apple Mail app! What's wrong with it!!

    We cannot possible know what's wrong with it. But we can offer suggestions that might help.
    Try resetting the iPad - its like rebooting a computer.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This might help as well.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again

  • ORA-00210: cannot open the specified control file

    Hi all,
    Initially we faced the following error:
    ORA-00214: control file '+DBDG/dws/controlfile/current.256.638648487' version
    75647 inconsistent with file '+FLASHDG/dws/controlfile/current.256.638648489'
    version 75645
    Then the following action:
    RMAN> restore controlfile from autobackup;
    Starting restore at 05-DEC-07
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=997 devtype=DISK
    recovery area destination: +flashdg
    database name (or database unique name) used for search: DWS
    channel ORA_DISK_1: autobackup found in the recovery area
    channel ORA_DISK_1: autobackup found: +flashdg/DWS/AUTOBACKUP/2007_12_04/s_640476511.697.640476513
    channel ORA_DISK_1: control file restore from autobackup complete
    output filename=+DBDG/dws/controlfile/current.256.638648487
    output filename=+FLASHDG/dws/controlfile/current.256.638648489
    Finished restore at 05-DEC-07
    RMAN> recover database;
    Starting recover at 05-DEC-07
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 12/05/2007 15:16:10
    ORA-00210: cannot open the specified control file
    RMAN>
    Any idea why this is happening?
    Regards,
    Soma Sekhar Karri

    Something which you should have looked up prior to posting
    00210, 00000, "cannot open the specified controlfile"
    // *Cause:  Cannot open the controlfile.
    // *Action: Check to make sure the controlfile exists and is not locked by
    // some other program.
    Sybrand Bakker
    Senior Oracle DBA

  • Cannot open Nikon 1V2 Raw files in CS5

    Hello!
    I cannot open Nikon 1V2 Raw files in CS5
    Camera Raw Version is 5.0.0.178, PS CS5 Version 11.0.2
    Anyone have a suggestion that does not involve upgrading to a newer version of Photoshop?
    Thanks!
    Kelly

    Does this mean that I can't get Camera Raw 7.3 with Photoshop CS5?
    Naturally.
    Photoshop CS5 does not use ACR 7.
    I did read about using the free DNG Converter but that seems like an extra step I would prefer to avoid if possible.
    Either upgrade Photoshop or use another means to process the RAW files, and cost-wise DNG Converter can hardly be beat.

  • Cannot open Canon CS2 Raw files in Bridges and Photoshop

    I cannot open Canon CS2 Raw files in Bridges and Photoshop. I have never been able to open it.

    Here are what cameras are supported by what version of the ACR plug-in and Lightroom:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Here are what Adobe programs use what version of the ACR plug-in:
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.

    Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.

    The only thing I can think of is if you got a replacement D610 as rumored here:
    http://nikonrumors.com/2014/01/27/nikon-is-replacing-some-d600-cameras-with-new-d610-model s.aspx/
    In that case, you would need the new version of Camera RAW or DNG converter as per Camera Raw plug-in | Supported cameras .
    The other thing to check is if the files open in the Nikon native ViewNX software. If they don't it's time to call the service center.

Maybe you are looking for