Cannot open database due to incorrect file size

Hi,
we have a oracle database 8.0.5 and it crashed yesterday. now we cannot open the database (only mount readonly) due to an incorrect filesize of usr1orcl.ora. is there a simple way to open the database?

i'm sorry but it wasnt in archivelog mode.
the ora error codes are:
ORA-01122: datafile name - failed verification check
Cause: The information in the datafile is inconsistent with information from the control file. This could be for any of the following reasons:
The control file is from a time earlier than the datafiles.
The datafile size does not match the size specified in the control file.
The datafile is corrupted.
Action: Make certain that the datafiles and control files are the correct files for this database, then retry the operation.
ORA-01110: datafile name: str
Cause: This message reports the filename involved with other messages.
Action: See the associated messages for a description of the problem.
ORA-01200: actual file size of num is smaller than correct size of num blocks
Cause: The size of the file, as returned by the operating system, is smaller than the size of the file as indicated in the file header and the control file. Somehow the file has been truncated.
Action: Restore a good copy of the datafile from a backup and perform recovery as needed.

Similar Messages

Same message 2 dnld Plugin, (Java), and Adobe Reader: Error 2203.Database: C:\Windows\Installer\ced2e.ipi. Cannot open database file. System error -2147287035.E

Spent all afternoon downloading Java plugiins and Adobe reader; each with the following "failure message."
Error 2203.Database: C:\Windows\Installer\ced2e.ipi. Cannot open database file. System error -2147287035.Error 2203.Database: C:\Windows\Installer\ced2e.ipi. Cannot open database file. System error -2147287035.

This is going to sound lame, but... have you shut down and restarted Windows since this problem began? Sometimes the Windows Installer starts behaving erratically, perhaps due to a backlog of deferred updates, and the only way to get around it is to reboot.

The Microsoft Access database engine cannot open or write to the file in Report Builder 3.0

I am trying to build a report in Report Builder 3.0. I created the Data Source to point to my Excel file and the Data Set. I drag a couple of fields on to the canvas and then choose Run. I get the error: "The Microsoft Access
database engine cannot open or write to the file. It is already opened exclusively by another user". I am using the Excel driver. Why am I getting this message? How can I fix this?

No, now I am getting the error message again. It is quite long:
ERROR [HY000] [Microsoft][ODBC Excel Driver] The Microsoft Access database engine cannot open or write to the file '(unknown)'. It is already opened exclusively by another user, or you need permission to view and write its data.
ERROR [01S00] [Microsoft][ODBC Excel Driver]Invalid connection string attribute Trusted_Connection
Please help

The Microsoft Access database engine cannot open or write to the file \\fileserver\db\access.mdb

Hi,
I have Windows Server 2012 with SQL 2012 Standard SP1. I am using linked server, and Access Database Engine 2010 Redistributable to access my database file made in Microsoft Access (.mdb) from network file server.
EXEC master.dbo.sp_addlinkedserver @server = N'MyLinkedServer', @srvproduct=N'MyLinkedServer', @provider=N'Microsoft.ACE.OLEDB.12.0', @datasrc=N'\\myfileserver.mydomain.com\files\mydatabase.mdb'
My SQL service is running with domain service account MYDOMAIN\SQL1$ , i have added Full control for file share and NTFS permission on my file server folder (C:\Files).
When I open (as domain admin with UAC elevated permissions) on my DB server SQL Management studio, I can browse tables and everything works.
The problem is, if I open SQL management studio (as domain admin with UAC elevated permissions) on my File server or any other computer, when trying to browse my linked server i got error:
TITLE: Microsoft SQL Server Management Studio
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Synesis_3PRO2013". (Microsoft SQL Server, Error: 7303)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.00.3000&EvtSrc=MSSQLServer&EvtID=7303&LinkId=20476
When I try to place simlpe Select SQL query I got error:
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "MyLinkedServer" returned message "The Microsoft Access database engine cannot open or write to the file '\\myfileserver.mydomain.com\files\mydatabase.mdb'. It is already opened exclusively by another
user, or you need permission to view and write its data.".
I do not have any other program using my access database, and user has full control. I am trying to use in security mode - "For a login not defined in the list above, connections will be made without using a security context", i have also tried all four options.
I am confused becouse it works from SQL server but from any SQL client domain member computer/server it does not work.
I have same problem in another environment where I have Windows Server 2008 R2 and SQL 2008 R2 SP2.
Please help.
-- Hrvoje Kusulja

NTFS must be fine since it works from same server using same accounts.
As I understand, adding my access file to Access trusted location could be a problem. I have tried now to add my access database file location to trusted locations for user which is my SQL service user (Windows Service - AD managed service account MYDOMAIN\SQL1$)
and my test user which I use to connect to sql server as a client from sql management studio. (Account is Domain Admins and have full permissions on SQL server also)
I have added this .reg:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security]
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security\Trusted Documents]
"LastPurgeTime"=dword:01592874
"DisablePromptOpenNetworkTrustedDocuments"=dword:00000000
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security\Trusted Locations]
"AllowNetworkLocations"=dword:00000001
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security\Trusted Locations\Location0]
"Description"="My file server"
"AllowSubFolders"=dword:00000001
"Path"="\\\\myfileserver.mydomain.com\\files\\"
I have done this for SQL service account user and my personal test account as I said. I have tried to logoff and restart sql service and all servers also.
The same problem still persists.
Anyway, thank you for giving me a hint.

I cannot open photoshop due to file damaged by disc error

I cannot open CS5 due to this message "could not initialize photoshop because the file has been damaged due to disc error

JJ,
I tried everything you mentioned but to no avail, still getting the same response "could not initialize photoshop because the file has been damaged by
disc error. I did run the Chkdsk and it didn't help, I still can't open CS5, not even to check updates....
Thank you,
Kelli Herring
Kelli Herring Photography

SCOM not generating alerts & The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager

Hi Anyone can assisting on this. The SCOM 2007r2 i managed suddenly do not pump out alerts.
I have perform full scom service restart(data access, agent, config). it no load up related datawarehouse like(stored, write)
I also restarted my sql db services. It show me the error like this. Anyhow i can fix it
The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager" requested
by the login. The login failed.
Login failed for user 'HK\svc-scomsdk'.
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at System.Data.SqlClient.SqlConnection.Open()
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at System.Data.SqlClient.SqlConnection.Open()
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
   at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
   at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".

Hi,
I would like to suggest you reset the SDK account password (in this case, it seems like that the account is 'scomsdk'). And change the password for the account in service configuration.
Please go through the below article for details:
How to change the credentials for the SDK Service and for the Config Service in Microsoft System Center Operations Manager
http://support.microsoft.com/kb/936220/en-us
Regards,
Yan Li
Regards, Yan Li

Install Lightroom on a new computer - error message 2203.database Cannot open database file system error 2147287037. Can anyone help me with this?

I am trying to install lightroom on a new computer and am getting error message 2203.database Cannot open database file system error 2147287037. Can anyone help me with this?

This site has some info
Error 2203 | Install | Creative Suite 4, 5, or 5.5 products or updates

[ERROR] [DAAPI] iso=-1:[I2C] cannot open /dev/i2c-1 bus file

I am running the TemperatureSensor project from lesson 2
I can detect the BMP180
pi@raspberrypi ~/javame81ea/bin $ sudo i2cdetect -y 1
     0 1 2 3 4 5 6 7 8 9 a b c d e f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- 77
I can retrieve the I2CDeviceConfig info
Controller Name:   null
Controller Number: 1
Address:           0x77
Address Size:      7
Clock Frequency:   3400000
My API permissions are
jdk.dio.DeviceMgmtPermission "*:*" "open"
jdk.dio.i2cbus.I2CPermission "*:*"
But when I attempt
myDevice = DeviceManager.open(config);
I get
[ERROR] [DAAPI] iso=-1:[I2C] cannot open /dev/i2c-1 bus file
Any suggestions?

Hi Tom,
I stepped back and removed the BMP180 entirely. The UU remained.
Googling "raspberry pi UU" yielded
https://github.com/raspberrypi/linux/issues/581
which referenced
http://www.raspberrypi.org/forums/viewtopic.php?f=44&t=31420&p=612513#p612513
which referenced
https://www.hifiberry.com/forums/topic/i2cdetect/
which reccomended blacklisting snd_soc_wm8804
Googling "what is snd_soc_wm8804" yielded
http://www.raspberrypi.org/forums/viewtopic.php?f=44&t=81750
which explained the whole matter
Anyhow the UU is gone. Only 77 is detected now. The mystery continues which I accept as an interesting challenge.
Victor

Reader Error: There was an error opening this document. The file size exceeds the limit allowed...

The full error is: There was an error opening this document. The file size exceeds the limit allowed and cannot be saved.
I didn't think Reader had a size limit? The file is only a couple of hundred MB.
Does anyone have an idea what could be causing this error?
-Richard.

Is that an online document, or a local one?
If online, see http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/error-0x800700df-the- file-size-exceeds-the-limit/d208bba6-920c-4639-bd45-f345f462934f

Cannot open database " " requested by the login. The login failed. SQL Server 2008 Express

I am getting this message when I try to create a path to a work file from my application.
Cannot open database " " requested by the login. The login failed.
SQL Server 2008 is installed. I have placed the computer name and instance in the application's config file as connection source.
The database is also not showing up in SQl Server Management Studio in list of databases.
Thanks.

Hello,
Can you please confirm login exist in the sql server and its mapped to particular database.
Are you directly connecting to SSMS?
Or using any 4 part query?
Please share how you are accessing the DB and screen hots of error messages.
Thank You.
Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

(0x80131904): Cannot open database "SUSDB" requested by the login.

Hi everybody,
Currently i have the following error in the WCM.log file and WSUS synchronization failes as well:
System.Data.SqlClient.SqlException (0x80131904): Cannot open database "SUSDB" requested by the login.
The login failed.~~Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.~~ at Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow(SoapException soapException)~~ at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetComponentsWithErrors()~~
at Microsoft.SystemsManagementServer.WSUS.WSUSServer.get_ComponentsWithErrors()
Current environment:
- SCCM 2012 SP1 and WSUS 3 SP2 on the same server.
- WSUS is using the windows internal database.
any advise??
thanks

Check these steps.
go to Sql Server Configuration management->SQL Server network config->protocols for 'servername' and check TCP/IP is enabled.
Open SSMS in run, and check you are able to login to server using specfied username/password and/or using windows authentication.
repeat step 1 for SQL native client config also

Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'

I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message:
"Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB.
Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
Thanks much! - Rookie DBA

Hi IWAR,
The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
Expand the database in which to create the new database user.
Right-click the Security folder, point to New, and then click User.
On the General page, enter a name for the new user in the User name box.
In the Login name box, enter the name of a SQL Server login to map to the database user.
Click OK.
Reference:
http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Incorrect files sizes displayed in the finder

My early 2009 iMac with 4GB Ram, 650Gb HD, running OSX Snow Tiger (latest version) is showing incorrect file sizes for many things. For example, a 4.21GB DVD will show on the desktop as being 4.58GB... any thoughts??

Snow Leopard misrepresenting file sizes: Apple Support Communities

System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for user 'NT AUTHORITY\SYSTEM

Dear ALL
After successfully shifting the CRM from 2011 to 2013 i found a problem in Reporting section none of the report is working after some finding i conclude that MSCRM_FetchDataSource is not able to connect successfully
Through my report manager i tried to test the connection of MSCRM_FetchDataSource but i got the following error
System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for
user 'NT AUTHORITY\SYSTEM'.
I already add the NT Authority \ System as a db_owner under my database user of MSCRM_CONFIG
But still no success any one have any idea why it's happaning
Regards
RB

I found a solution I hope my post will help other
I gave the db_owner to 'NT AUTHORITY\SYSTEM' and 'NT AUTHORITY\NETWORK' and assigned with both CRM and Config database
It resolved my issue
RB

Why I cannot open a restored domain.sites2 file with iweb?? Message: "

Why I cannot open a restored domain.sites2 file with iweb?? Message: "domain.sites2 couldn't be opend"

Please supply screen shot when it is asking for updates. (Do not send as email, use CAMERA icon). This is important, there are many fake updates.

Cannot open database due to incorrect file size

Similar Messages

Maybe you are looking for