Cannot open or create files in PSE 11
For some reason my elements has decided to stop opening files. I've done a search and tried the few suggestions I found but they did not work.
I am running windows 7 64-bit OS
I cannot get the program to open any files or create new ones. It will let me go into my file explorer and choose a file to open, then it never opens. I've even tried files I've had open in the past thinking there may be something wrong with the file I was attempting to open. The weird thing is, if I go into the recently edited area, it will show the file name as though it had opened it.
I've cleared the preferences, I've tried opening from the folder and from in the program. I'm pretty tech savvy, so if someone could give me a basic rundown on what to do or even point me in the right direction to find out how to fix it, I would greatly appreciate it since the search function on this site brings up all of the elements versions when I specify 11.
Thanks in advance.
Can you open the application at least? By this I mean when you double-click on the desktop icon (or by going to start (windows ORB) >> All Programs >> Adobe PhotoshopElements11)?
If so then to open the file click on the Editor tab and then go to:
file >> Open
OK this is one method but there are many ways to open the file)
So when you do this, do you get any error message?
Similar Messages
-
Can't Open NEF RAW files in PSE 6
I cannot open NEF RAW files in PSE 6. I downloaded the plugin but that didn't fix it. Any suggestions?
There is another choice.
You can download the free Adobe DNG Converter, then convert your RAWs to DNG, and then open them in the PSE6 Adobe Camera Raw editor. This doesn't require you updating your software to PSE9, or purchasing anything. -
I had the problem before. Reinstalled Photoshop CS5 and updated again.
Clicking a file starts Photoshop but does not open the file.
If I click "new" to make a new file, nothing happens.
Help....!!!!!!Hi PE
Yes, but nothing happened.
I was instructed to press some key during startup of Photoshop, and it should reset the program.
However, it did not work.
Br
Lars Hansson
Den 29/10/2013 kl. 11.49 skrev PECourtejoie <[email protected]>:
Re: After updating photoshop CS5 to 12.0.4 x32 (windows) I cannot open my documents/files or create new
created by PECourtejoie in Photoshop General Discussion - View the full discussion
Hansson, did you get a window asking you if you wanted to reset your preferences.
Maggedotno, is it the english version? Do you have third party plug-ins? Can you post the contents of help>system info?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5796463#5796463
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5796463#5796463
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5796463#5796463. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Photoshop CS6 cannot open or create new file. This happened after running CCleaner
Photoshop CS6 cannot open or create new file. This happened after running CCleaner
Hi, I've been asked to join this discussion. CCleaner is a nice tool, but if you used the Registry Cleaner that came with it, it might have done something to Photoshop's registry entries. There is that danger in using them.
One thing CCleaner does is leave a backup of the registry, or you can use Windows System Restore to go to that point before you ran the Cleaner. Let's go with System Restore. Review the instructions.
System Restore - Microsoft Windows
If you suspect a virus, I'd like to direct you here http://bleepingcomputer.com/
That would be the "Am I infected?" forum.
They have the tools, you run them, and copy and paste the logs that are generated. They are very good at this, but it is super important you follow directions and don't leave until the process is completed.
Gene -
IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open
Hi there,
i hope i'm in the right board.
I recently tried to compress avi-files i collected from various cameras throughout the last years.
At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
So i gave it a last, let's call it fail-proof, try:
I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
Thanks in advance
Markus
P.S.
I'm using LabView 2010 and VAS of 02/2014.Hello Markus,
have you had a look at this:
Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
Compressing avi files-Discussion Forums
Regards,
eletra -
Cannot open QB 2007 file after installing R7 upgrade
I installed the Quickbooks Pro 2007 "upgrade" and then tried to open my old Quickbooks Pro 2007 for Mac company file.
1.) It asks me if I want to Upgrade the file (no choice)
2.) Then it simultaneously says "Working" and gives me a warning about the file not being able to be renamed and that I have to rename it and save it in the QB folder.
3.) Then - whatever name I give it - it says it could not create the upgraded file.
4.) It also says that it could not open the existing file.
I'm not sure what to do - the file is only 4.7MB and I've tried every combination to get it to open.
Is there some trick? Nothing about this on the Intuit Forum. Nothing on Google either.
Help would be greatly appreciated as I cannot open my business file!I guess what is happening is that I originally installed quickbooks and the company file on my macMini and I suspect that it is not opening it on my iMac because of a sharing violation.
I did unlock both the application and the files but they still won't open.
Any suggestions would be appreciated. -
Mac Word 2008 - hyperlink message "Word cannot open the specified file"
I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj -
Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AMa step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed. -
I just downloaded the trial version of Photoshop CS6. And cannot open adobe eps files ?
I have installed Photoshop CS6 and cannot open adobe eps files? any Ideas
Hi there
When you say that you can't open eps files, are you getting an error message?
Photoshop CS6 has the ability to open both .eps and .ai files. However, opening by going to File > Open... will rasterize the image - meaning that it is no long a vector so you can't scale it up and down without losing quality. To open an .eps or .ai file in Photoshop and maintain its vector capabilities, try the following:
Create a new canvas in Photoshop. Then, go to File > Place...
After selecting your file from the Place dialog box, your image will be placed into your canvas. Resize accordingly, and then hit Enter on your keyboard.
The image you just placed is a Smart Object, meaning that it has retained its vector capabilities and can be resized without losing image quality. If you ever need to rasterized this image, just right click on the layer and select Rasterize Layer.
If you are still having trouble, please post here again so that we can provide additional assistance.
Cheers!
Kendall -
Why I cannot open raw files (NEF) from camera Nikon D3200 through Adobe Bridge and/or Photoshop ?
Thanks for the tip. It worked out perfectly.
De: ssprengel [email protected]
Enviada em: terça-feira, 14 de janeiro de 2014 19:14
Para: Aecio Paes Leme
Assunto: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
Re: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
created by ssprengel <http://forums.adobe.com/people/ssprengel> in Adobe Camera Raw - View the full discussion <http://forums.adobe.com/message/6012775#6012775 -
Why Adobe Reader XI cannot open a pdf file that can be opened with Reader 9?
Why Adobe Reader XI cannot open a pdf file within a browser that can be opened with Reader 9?
Hi Steve,
Sorry, I cannot post a URL to the file because it is for intenal use only.
I noticed that the pdf file can be opened outside of IE browser if I disable the Adobe Reader add-on (active-X) in IE browser. If I enable the Reader add-on, the Reader cannot complete the file download. The progress bar goes in a half way, and stays there.
Just FYI, the pdf file was created by Distiller 7. Do you think it is the issue of Reader add-on? Thanks. -
What is wrong with Reader? Having loaded it I now cannot open any .pdf file in my computer or on email.
Wallabykangaroo wrote:
I gave up loading then scouring out Adobe products each time it told me Flash Player was loaded but was nowhere to be found on my system. I have now done what I expect is the intention in that I have downloaded the full Adobe trial pack, which they then expect me to purchase.
Cannot get over the impression that the fault is deliberate. Building in the requirement for all users then loading a weak link, that drives you to purchase.
Shockwave is FREE... Flash Player is FREE.... Adobe Reader is FREE... Adobe AIR is FREE... Those four products are, and always have been, FREE... Flash Professional, which is for creating and editing Flash animation and video files, is a paid licensed product. Acrobat Professional, which is for creating and editing PDFs, is a paid licensed product. Neither Flash Player nor Adobe Reader have any links to prompt an upgrade to the professional version of software for the file format. Never have. Viewing Flash content and PDFs needs to be universally available to the public who receive such content over the Internet. Creating and editing Flash files and PDFs is not something that everyone needs, so it's only available at a cost for those who need it and choose to use Flash Pro or Acrobat.
There are Creative suites with several Adobe applications for everything from photo and graphic editing, to video editing, to making e-readers, to web design, but those are for developers of the individual media. -
Greetings,
So today I decided I'd play an old windows game with my son. It's been a while since I've played wine game with him... since my last reinstallthat I did just for the S&G to play with the new install method.
Anyways, I go through the motions, installing wine and all that. Then I go and click on the game to run. Nothing.
So, I go and try to run it through command line. I get this fun stuff:
wine H5_Game.exe
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
err:module:load_builtin_dll failed to load .so lib for builtin L"winex11.drv": libSM.so.6: cannot open shared object file: No such file or directory
err:module:load_builtin_dll failed to load .so lib for builtin L"winex11.drv": libSM.so.6: cannot open shared object file: No such file or directory
Application tried to create a window, but no driver could be loaded.
Unknown error (127).
I search the mighty internets and try many different things. But I cannot seem to find the file that gives "libSM.so.6" or whatever is needed to make this work. So defeated, I come to you to ask that you please give me a leg up here.
Thanks, in advance, for any and all help!
Last edited by mythus (2012-10-14 18:16:48)Honestly, I did not know about pkgfile.
So, I installed it and determined that while I have libsm, I was missing lib32_libsm. So installing that fixed my issue with WINE.
Thanks for the leg up Trilby! Most appreciated! -
Linux - libnqwebibotapi.so Cannot open shared object file
BI is running on my Linux box (Redhat). I have configured and started BI Scheduler. It starts without an issue.
When I create an iBot to be delivered immediately I get the error:
libnqwebibotapi.so: cannot open shared object file: No such file or directory [nQSError: 77002] Could not load iBot library libnqwebibotapi.so.
My LD_LIBRARY_PATH is pointing to the location of the file: /opt/oracle/oraclebi/web/bin
declare -x LD_LIBRARY_PATH="/opt/oracle/11.2.0/client_1/lib:/opt/oracle/oraclebi/server/Bin:/opt/oracle/oraclebi/web/bin"
Any ideas? I am not sure what step I am missing.
Thanks!
EricCan you post the full error log from Delivers please
You've not told us OS, versions, etc
http://catb.org/~esr/faqs/smart-questions.html#beprecise -
While updating, I got:
[2013-05-05 19:31] [PACMAN] upgraded cups-filters (1.0.34-2 -> 1.0.34-3)
[2013-05-05 19:31] [ALPM-SCRIPTLET] gtk-update-icon-cache: error while loading shared libraries: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-05 19:31] [PACMAN] upgraded dia (0.97.2-4 -> 0.97.2-5)
[2013-05-05 19:32] [ALPM-SCRIPTLET] gtk-update-icon-cache: error while loading shared libraries: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-05 19:32] [PACMAN] upgraded firefox (20.0.1-2 -> 20.0.1-4)
[2013-05-05 19:32] [PACMAN] upgraded gcc-multilib (4.8.0-3 -> 4.8.0-4)
[2013-05-05 19:32] [PACMAN] upgraded gd (2.0.36RC1-5 -> 2.0.36RC1-6)
[2013-05-05 19:32] [ALPM-SCRIPTLET] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-05 19:32] [PACMAN] upgraded gdk-pixbuf2 (2.28.1-1 -> 2.28.1-2)
[2013-05-05 19:32] [PACMAN] upgraded gegl (0.2.0-7 -> 0.2.0-8)
[2013-05-05 19:32] [PACMAN] upgraded ghostscript (9.07-1 -> 9.07-2)
[2013-05-05 19:32] [ALPM-SCRIPTLET] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-05 19:32] [PACMAN] upgraded libwmf (0.2.8.4-9 -> 0.2.8.4-10)
I opened the /var/lib/pacman/local/*/files of the mentioned packages and ran the mentioned commands with sudo. Today I got the following error while starting Wireshark (and gnuplot):
(gnuplot:8581): GdkPixbuf-WARNING **: Error loading XPM image loader: Image type 'xpm' is not supported
Segmentation fault (core dumped)
(wireshark:8440): GdkPixbuf-WARNING **: Error loading XPM image loader: Image type 'xpm' is not supported
ERROR:stock_icons.c:229:stock_icons_init: assertion failed: (pixbuf)
Aborted (core dumped)
It turns out that /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders.cache was created with permissions 640 (due to my umask). The solution was to chmod 644 it.
(similarly, gtk-update-icon-cache created /usr/share/icons/hicolor/icon-theme.cache with wrong permissions (640). This did not seem to cause issues though.)
Hopefully it will be of help to someone.
Last edited by Lekensteyn (2013-05-06 14:57:47)I also got into problems after a pacman -Syu today.
I believe removing cleartype-cairo and installing cairo instead fixed the problem
Hope this helps.
As a reference, here are some troubleshooting steps I did:
sudo pacman -S gdk-pixbuf2
warning: gdk-pixbuf2-2.28.1-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Packages (1): gdk-pixbuf2-2.28.1-2
Total Installed Size: 3.67 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [###################################################################################] 100%
(1/1) checking package integrity [###################################################################################] 100%
(1/1) loading package files [###################################################################################] 100%
(1/1) checking for file conflicts [###################################################################################] 100%
(1/1) checking available disk space [###################################################################################] 100%
(1/1) reinstalling gdk-pixbuf2 [###################################################################################] 100%
g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
$ pkgfile /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so
extra/librsvg
$ yaourt -Sb librsvg
CCLD rsvg-view-3
/usr/bin/ld: warning: libpng15.so.15, needed by /usr/lib/gcc/x86_64-unknown-linux-gnu/4.8.0/../../../../lib/libcairo.so, not found (try using -rpath or -rpath-link)
$ pkgfile libcairo.so
extra/cairo
multilib/lib32-cairo
[nemo@ilnwadz ~]$ sudo pacman -S cairo
resolving dependencies...
looking for inter-conflicts...
:: cairo and cairo-cleartype are in conflict. Remove cairo-cleartype? [y/N] ^C
Interrupt signal received
Maybe you are looking for
-
MPEG2 Video is not smooth in Quicktime Pro Player
I have a MBP with Core2 2.4Ghz (2GB RAM, 250GB SATA HDD). I have a bunch of mpeg2 files downloaded from my Canon HV20 HiDef camcorder. When I play the files with Quicktime Pro with MPEG2 Component, the video looks very very jerky. The CPU usage is no
-
How to disable localization without a password
On my Ipad I am trying to change the Icloud account which is no more valid to a new Icloud account , however when I go to Icloud to delete the old account I am asked to disable localization service which I can't because the password asked refers to t
-
Flash cs5 swf not running properly in captivate 5
Hi, I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly o
-
Are switches Catalyst 2960S series supported in LMS 2.6?
Hello, I have a CiscoWorks LMS 2.6 and i would like to know if the new Switches Catalyst 2960-S Series are supported with this LMS version? Thanks, Alejandro
-
Folks, We have 2 6500's working in failover mode at the core. They are running CATOS at the present time. My question is can i implement IOS modularity on them at the present time. I have SUP 720's. Would i have to move to Native for IOS modularity o