Cannot open / process more than 30 BMPs

I want to open about 50 small .BMPs (88x88) so I can create a master palette that I will then batch apply to all these images. The problem is that Photoshop CS3 (10.0.1) will open 30 of them and then just stop. No crash, no error message; it just stops opening up any more of the .BMPs. At that point, I can then go to File/open and try to open up the next image in the sequence by itself, and sometimes it will open, sometimes it won't. But trying to open up all of the rest of the images at the same time just doesn't do anything.
So I thought I'd batch convert to .TIFFs just to see if that would help at all. But trying to batch convert the .BMPs does the same thing -- it goes for a while and then just stops after processing 30 of them. This time, however, I get an error: "The command 'convert mode' is not currently available."
So I'm having to batch convert to .TIFFs in another program. Frustrating.
It looks like I might simply be up against an honest-to-goodness bug (more on that below), but I thought I'd ask here in case there might be something I'm doing wrong.
It doesn't appear to be memory related (before loading the images, I might be using about 700MB of RAM; after the (failed) load, it's only about 750MB (and this is out of 3GB of RAM with Photoshop set to use the default 70%). There is plenty of free space on the scratch disk (121GB).
Interestingly, I've been able to tie this behavior into a bug that's been annoying me for some time but until now could never figure out how to reproduce -- when working for a while with .BMPs, occasionally I'd get Photoshop into this mode where saving out .BMPs creates 0 KB, invalid files. And if I don't check now and then as I'm saving, I can really screw myself because I have to go back and re-save all those invalid files (after closing and re-opening Photoshop to get it out of this "mode"). Well, I discovered that after trying to open the 50 files I want but Photoshop stops at 30, it is now in unable to save valid .BMPs. If I try to save a new .BMP from one of the open files to some other location (or as a copy to the same location), it will almost always save a 0 KB file. I've reported this behavior to the bug report link.

Hi Cedric,
try it with transaction sicf -> Edit -> Debugging -> Deactivate Debugging.
Regards,
Rainer

Similar Messages

Java.sql.SQLException:Cannot open any more tables.

I have such exception(java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Cannot open any more tables.) when I try to make request to database:
if(null!=con)
try{
Statement stmt;
stmt = con.createStatement ( ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_UPDATABLE);
ResultSet rs= stmt.executeQuery(quary);
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
ex.printStackTrace();
}//try
But exception occurs after several requests(about 20). First 20 requests work fine. What is it? Thanks.

Statement stmt;
stmt = con.createStatement ( ResultSet.TYPE_SCROLL_INSENSITIVE,
try{
ResultSet.CONCUR_UPDATABLE);
ResultSet rs= stmt.executeQuery(quary);
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
ex.printStackTrace();
}//tryyou should reuse the statement rather than opening it for every query
Good Luck

File open on more than one computer at a time

I maintain a network of four Macs (Cube, G4 Tower, Mini, and G5 Tower) all running OS 10.4.11. Recently two people working on the network discovered that they both had a certain file open at the same time. In order to determine the extent of the problem, on each computer I created and kept open a TextEdit file. I then attempted to open each TextEdit file from the three computers on which the file was not stored. To my dismay I received no error or warning message of any sort. I was able to open all four files on all four computers at the same time!
Each of the computers has a single user, and each computer is logged into the other computers as the user on that computer (i.e., each guest is logged in as the host). I wonder if that might be the source of the trouble.
I never noticed any file being open on more than one computer at a time when all the computers were running 10.3.9, only after I upgraded to 10.4.
Any ideas?

This is absolutely standard behavior and I don't expect this to change any time soon.
Let me try to explain based on a model of a file stored on Server1 and being accessed by Client1 and Client2:
Here's what's happening:
Client1 connects to the server and opens the file for reading.
Client1 reads the file and closes it
Client2 connects to the server and opens the file for reading.
Client2 reads the file and closes it
Since Client1 closed the file there's nothing to indicate to Client2 that the document is in use anywhere else because, in fact, it isn't.
There's nothing on the server that knows whether Client1 opened the file to look at it, to copy it, to back it up to some other media or to actually edit it. It is only that last step that should prevent another client from opening the file.
If you think about it, that makes perfect sense. If you copy the file over the network to Client1 you do not want the server to think that Client1 has an exclusive hold on that file and to prevent Client2 from opening it.
The only time the file is in use is a) when the file is being read, and b) when the file is being saved. When it's just being viewed the client doesn't have an active hold on the file.
The actual fix here is for the application to set a flag that the file is in use and for the server to honor that flag. It's supported by the networking protocols but it's rarely implemented in applications except those that expect a multi-user setup.

My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time.

My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time. Help anyone?

Is there a crash log? If so post the first 100 or so lines o fit
Do you know what the ofending plugin is? and where it came from?
LN

Iphoto won't stay open for more than a second

My iphoto won't stay open for more than a second. What could be wrong?

You can see more than any of us here. If there is no other indication beyond what you have described, then it could be anything. We don't even know if you have somehow deleted the application.

PL cannot be taken more than three occasions in a calendar year

Dear All,
I am new in SAP-HR TIME MANAGEMENT. My client was implemented negetive time management. I need to configure the leave rules . .My first issue on "PL cannot be taken more than three occasions in a calendar year". Please help me if anybody had the same prob.
Thanks & Regards
SR

In my opinion.....
To check if an employee has taken PL 3 or more than 3 times in a year should be done at the infotype level, that is when the infotype 2001 is being saved.
At this level you can think about three options, configuration, dynamic action and user exit.
it is not possible to check no of times through configuration.
Dynamic Action I dont think (I am not 100% Sure) it is possible to check the no of times.
So the option left is to create a User Exit. User Exit is a program which will be based on the Infotype. And will restrict saving the infotype if the condition is not met, condition in your case, PL not availed greater than 3 times in calendar year.

Why does does my MacbookPro screen keeps shutting off when I open it more than halfway?

I Have a very new Mac, and for some reason, the screen goes black when I open it more than halfway. It happens to all the users, and even if it is or isn't charging. The brightening keys also doesn't do anything for it. I don't know if this is connected, but I also have half of the lights on at the dock, it kind of looks like lights on a stage.......
please help if you can. i can't live like this anymore!

Anything that is repeatable can be fixed at the genius bar.
You appointment for an evaluation is free at an Apple store, in warranty or out.

How to close open POs which are open for more than two month

I am new to MM please somebody help me with this
Thank you

there is NO STD SAP program which will help u closing the open PO (more than two months)
you need to go each and every PO and mark it as Del completed (item level in deleivery tab)
but this is only stastestical indicator. System wont stop you creating further GR against such PO if any Qty leftout.
for example - PO order 10EA, you recd 8EA and marked the indicator , still you can make the GR for 2EA
there is SPRO setting as well to mark the PO as delivery completed once PO Qty and MIGO QTy is equal or with some variance . but this will work on real time
Another way to set the final invoice indicator in invoice tab
system will allow you to post the further invoices but all be blocked.
somebody need to go and verify the blocked invoices and take necessary action
This is again a manual activity, there is no such STD setting or T code exist
Another way is you can create a program with the help of abaper
built a logic on date / QTy and Amount and update the PO for del complete ( EKPO-ELIKZ) and final inv indicator (EKPO-EREKZ) by using BAPI PO change
hope this will help you

PSE-7 won't allow opening of more than one file at a time.

I can only open one file at a time in PSE-7. I just downloaded the trial upgrade from PSE-6. If I try to open more than one file, PSE crashes and windows wants to send a report to Microsoft. Elements works fine with only one file. Anyone got any idea's ?

Try to exit out of Elements 7 and go back in to your Organizer. Open a file and choose to edit it in full edit. Then leave it there and go back to Organizer and choose another picture to go through the same process. Now you should have both pictures showing in your bin at the bottom of the edit screen which you can toggle back and forth to as you edit each. If you want them both in the edit window itself you can you to the Window tab - Image - and choose to tile them or cascade them. Good luck, hope this works.

How to keep a CD or DVD open for more than 1 burning

Hi,
In Windows, CD/DVD burner software allowed one the option to keep the disk "open", so that one could burn more than once. I don't find this option in the Mac. Is it impossible?
Thanks,
Juan Dent

it's possible but tricky and not convenient. windows implementation of multi-session burning is WAY better.
From disk utility help:
Recording on a recordable CD more than once
Normally, you can burn items to a recordable CD, such as a CD-R or CD-RW, only one time. However, if you use Disk Utility to burn the disc, you can burn items to a disk in more than one session as long as space is available. This is also called multisession burning.
To burn a disc, you need an optical drive in your computer or connected directly to your computer. You can’t burn a disc using a remote optical drive.
To burn to a recordable CD so you can burn to it again:
In Disk Utility, create a disk image that contains the files you want to burn to the disc.
The files must be from a volume with a Mac OS Extended disk format. To check a volume’s disk format, select the disk in Disk Utility, and look at the information at the bottom of the Disk Utility window.
Select the disk image in the Disk Utility list, and then choose Images > Burn.
Select the “Leave disc appendable” checkbox. If you don’t see this option, click the triangle in the top-right corner.
Insert a blank recordable CD in the optical drive and click Burn.
To add more files to the disc later, follow the steps above. You can continue this process until all available space on the disc is used.
There is also 3rd party software which supports multi-session burning on macs like [BurnAgain|http://www.macworld.com/article/133462/2008/05/burnagainfs.html]

Cannot work on more than one page and menu shifting problems

I downloaded Muse CC 2014 when it first came out, and now I find myself no longer able to edit more than one page without having to completely shut down the application and start it again. Here's what happens:
I open a page to edit, and then anything else I try to double click on (or right click and choose open page) does absolutely nothing. Any ideas why this is occurring?
Also, I've noticed a strange phenomenon where my menu has completely shifted its menu contents - pushing everything down. Nothing I did - wondering why this is happening. This has pretty much rendered Muse unusable to me and I am becoming more and more frustrated since I'm paying good money for this....please help.
Here's a screenshot of the messed up menu (all text should be located in between the green dots and not so spread out):
Also, if I try to create a border around a text box with just the bottom border showing (i.e. the other 3 sides are set to 0), that bottom border also shifts down as if the text container has suddenly expanded.
This happens with both my Macbook Air and my MacPro.
Thanks in advance for any help. I'm kind of at my wit's end....I really need to be able to update my website as this is the face of my business.
-Kristine

You could look at using a template. Create your master template, create editable and non-editable regions, then use this template create all the child pages. When you need to make a change to the menu, make it in the template and the changes will flow down to all the pages created from the template.
Using DW Templates:
http://www.adobe.com/devnet/dreamweaver/templates.html
http://www.adobe.com/devnet/dreamweaver/articles/dw_templates.html
The other option would be to create the Navigation item as a server side include...
More about this:
http://kb2.adobe.com/cps/143/tn_14380.html
http://www.entheosweb.com/website_design/server_side_includes.asp
Difference between using a template and server side includes.
When you make a change to a template, you need to re-upload all the pages created from the template.
Using a SSI, you make the change in the ssi file, upload it and all pages are automatically updated.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap

ORA-00604 & ORA-30512 CANNOT MODIFY TABLE MORE THAN ONCE IN A TRANSACTION

We have a requirement where two tables should be in sync at any given point
in time with respect to the structure of the tables.
Any change on table/column via ALTER (MODIFY, ADD, RENAME COLUMN, DROP
COLUMN) on the parent table should be replicated to the replica table.
I created a DDL_TRIGGER on the schema and the desired result is achieved but
for the following one scenario for which its failing.
The issue is, if we try to reduce the width of the column (via ALTER ..
MODIFY) it fails with the following error
ORA-00604: error occurred at recursive SQL level 1
ORA-30512: cannot modify DEVTESTF_OIM.REPLICA_ABC more than once in a
transaction
Please follow the steps to reproduce the issue (the issue is across the DB
version checked on 10.2, 11.1 and 11.2 DB version)
-- Step1 Create Parent Table
CREATE TABLE abc (col1 VARCHAR2(10))
-- Step2 Create Replica Table
CREATE TABLE replica_abc (col1 VARCHAR2(10))
-- Step3 Create DDL Trigger
CREATE OR REPLACE TRIGGER ddl_trigger
AFTER ALTER ON SCHEMA
DECLARE
operation VARCHAR2(30);
object_name VARCHAR2(30);
l_sqltext VARCHAR2(100);
i PLS_INTEGER;
l_count NUMBER:=0;
sql_text dbms_standard.ora_name_list_t;
BEGIN
i := dbms_standard.sql_txt(sql_text);
SELECT ora_sysevent, ora_dict_obj_name, UPPER(sql_text(i))
INTO operation, object_name, l_sqltext
FROM dual;
IF ora_dict_obj_name = 'ABC' THEN
l_count := INSTR(l_sqltext,'ADD CONSTRAINT',1,1);
l_count := l_count + INSTR(l_sqltext,'DISABLE',1,1);
l_count := l_count + INSTR(l_sqltext,'DROP CONSTRAINT',1,1);
l_count := l_count + INSTR(l_sqltext,'PRIMARY KEY',1,1);
l_count := l_count + INSTR(l_sqltext,'ADD CHECK',1,1);
IF (l_count = 0) THEN
l_count := INSTR(l_sqltext,'ADD',1,1);
l_count := l_count + INSTR(l_sqltext,'MODIFY',1,1);
l_count := l_count + INSTR(l_sqltext,'DROP COLUMN',1,1);
l_count := l_count + INSTR(l_sqltext,'RENAME
COLUMN',1,1);
IF (l_count >0) THEN
l_sqltext := REPLACE(l_sqltext,'TABLE ABC','TABLE REPLICA_ABC');
execute immediate l_sqltext;
END IF;
END IF;
END IF;
EXCEPTION
WHEN OTHERS THEN
RAISE ;
END;
-- Step 4 Issue the following ALTER command on the Parent table 'ABC'
ALTER TABLE ABC MODIFY COL1 VARCHAR2(9);
will show the following
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-30512: cannot modify DEVTESTF_OIM.REPLICA_ABC more than once in a
transaction
ORA-06512: at line 34
whereas the following commands works fine
ALTER TABLE ABC MODIFY COL1 VARCHAR2(11);
and also the rest of the operations
ALTER TABLE ABC ADD COL2 VARCHAR2(20);
ALTER TABLE ABC RENAME COLUMN COL2 TO COL3;
ALTER TABLE ABC DROP COLUMN COL3;
The issue is while reducing the size of VARCHAR2 columns, while the rest of
option works fine.
Any suggestion or workaround please.

It looks like a bug to me. The failing statement from the SQL trace is
PARSE ERROR #12:len=77 dep=3 uid=0 oct=3 lid=0 tim=1263332549608656 err=30512
select /*+ first_rows */ 1 from "TIM"."REPLICA_ABC" where LENGTHB("COL1") > 9and exception cannot explain it.

Hi first time mac user here, how can i open up more than one email account (hotmail) without merging them? I have merged 2 already Th.

Hi, how can i open up more email accounts (hotmail)? I have accidentally merged 2 - not sure how but urgently need to access others and cannot run this risk! thx

Hotmail is not part of the Mac OS - I'd check their website (Hotmail or Microsoft) to see how to do it.

Increase # of open terminals (more than 16)

I'm working with CDE and 8 virtuals desktops on a Sparc based machine. My main problem is, that the count of open / active terminals is limited to 16 terminals. How can I increase this number ?
Thanks in advance. George.

Hi,
Firstly, please get rid of the term VST. Logic only uses Audio Units, and they work a little differently "behind the scenes".
Ok. Now that you said the magic "only internal" synths phrase:
In the current Environment, I've made a separate "midi instrument" for each "audio instrument" device. I'm using the "midi instrument" to set the port and channel of each separately.
You do not need to do this. Because you are using internal synths (If you clue us in on WHICH ones....that could help too...unless that is a State Secret)
Somehow, I've managed to get the problem down to one annoying item: I have a chimes part that has some sustained notes that are being CUT OFF in mid-note. There is nothing in the Event List for that track that would explain this, so I'm guessing that the track must be receiving some midi data from someplace else.
My best guess is that you are playing back a Midi note that is, say XXX length, and the SAMPLE is only XX length. That would explain immediately why it is being "cut off".
OR...there is simply too much midi data at that point that the track....no that can't be because the music is thin there. I don't know. I just can't find it.
THAT is a delicious piece of speculation. Please inform yourself about what is really going on. Your posted question is totally misleading.
You don't need 16 tracks of Midi because ONE sound is not playing back the way you want. Your problem has NOTHING to do with the question that you put forth:
More than 16 midi tracks....best way to configure?
Where is the cut-off chime sound sample in this question??? Nowhere... and nowhere is the answer...oops...
I can't help you further, as I already spent a long time helping you set up an imaginary Midi setup that does not even exist, nor even solves your issue.
Cheers
Brought to you by the wise noeqplease, sans caffeine

System.ArgumentException: Illegal characters in path. When Processing More than 1 lakh records.

Hi ALL,
I am Having a trouble with processing the files using c# language. as it's giving the error saying that Illegal character into the path.
although i am using below regular expression for checking and removing the illegal character by another method.
Regex pattern = new Regex("\\/:*?\"<>|");
Some of the records are being processed correctly that means , records are being fetched from the database and written to the file system correctly by using BinaryWriter class.
Can anybody help me for this error to resolve.
Note:- There are more than 1 lakh records to be processed.

Hi Michael Taylor,
I have used the log4net to catch the errors while my loop was
continuing till the end of the processing of those many records.
Also System.IO.Path.GetFileName(filename) was throwing the error ,
so i have check the filename with regular expression and replace illegal character from there and then
call the System.IO.Path.GetFileName(filename) method.
i have use Regex illegalInFileName = new Regex(@"[\\/:*?""<>|]");
this regular expression to replace illegal character.

Cannot open / process more than 30 BMPs

Similar Messages

Maybe you are looking for