System.ArgumentException: Illegal characters in path. When Processing More than 1 lakh records.
Hi ALL,
I am Having a trouble with processing the files using c# language. as it's giving the error saying that Illegal character into the path.
although i am using below regular expression for checking and removing the illegal character by another method.
Regex pattern = new Regex("\\/:*?\"<>|");
Some of the records are being processed correctly that means , records are being fetched from the database and written to the file system correctly by using BinaryWriter class.
Can anybody help me for this error to resolve.
Note:- There are more than 1 lakh records to be processed.
Hi Michael Taylor,
I have used the log4net to catch the errors while my loop was
continuing till the end of the processing of those many records.
Also System.IO.Path.GetFileName(filename) was throwing the error ,
so i have check the filename with regular expression and replace illegal character from there and then
call the System.IO.Path.GetFileName(filename) method.
i have use Regex illegalInFileName = new Regex(@"[\\/:*?""<>|]");
this regular expression to replace illegal character.
Similar Messages
-
WLI problem when processing a high number of records - SQLException: Data e
Hi
I'm having some trouble with a process in WLI when processing a high number of records from a table. I'm using WLI 8.1.6 and Oracle 9.2.
The exception I'm getting is:
javax.ejb.EJBException: nested exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.
I think the problem is not with the table because it's pretty simple. I'll describe the steps in the JPD below.
1) A DBControl checks to see if the table has records with a specific value in a column.
select IND_PROCESSADO from VW_EAI_INET_ESTOQUE where IND_PROCESSADO = 'N'
2) If there is one or more records, we update the column to another value (in other DBControl)
update VW_EAI_INET_ESTOQUE set IND_PROCESSADO = 'E' where IND_PROCESSADO = 'N'
3) We then start a transaction with following steps:
3.1) A DBControl queries for records in a specific condition
select
COD_DEPOSITO AS codDeposito,
COD_SKU_INTERNO AS codSkuInterno,
QTD_ESTOQUE AS qtdEstoque,
IND_ESTOQUE_VIRTUAL AS indEstoqueVirtual,
IND_PRE_VENDA AS indPreVenda,
QTD_DIAS_ENTREGA AS qtdDiasEntrega,
DAT_EXPEDICAO_PRE_VENDA AS dataExpedicaoPreVenda,
DAT_INICIO AS dataInicio,
DAT_FIM AS dataFim,
IND_PROCESSADO AS indProcessado
from VW_EAI_INET_ESTOQUE
where IND_PROCESSADO = 'E'
3.2) We transform all the records found to and XML message (Xquery)
3.3) We update again update the same column as #2 to other value.
update VW_EAI_INET_ESTOQUE set IND_PROCESSADO = 'S' where IND_PROCESSADO = 'E'.
4) The process ends.
When the table has few records under the specified condition, the process works fine. But if we test it with 25000 records, the process fails with the exception below. Sometimes in the step 3.1 and other times in the step 3.3.
Can someone help me please?
Exception:
<A message was unable to be delivered from a WLW Message Queue.
Attempting to deliver the onAsyncFailure event>
<23/07/2007 14h33min22s BRT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction
Xid=BEA1-00424A48977240214FD8(12106298),Status=Rolled back. [Reason=javax.ejb.EJBException: nested
exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.],numRepliesOwedMe=0,numRepliesOwedOthers= 0,seconds since begin=118,seconds left=59,XAServerResourceInfo[JMS_cgJMSStore]=(ServerResourceInfo[JMS_cgJMSStore]=(state=rolledback,assigned=cgServer),xar=JMS_cgJMSStore,re-Registered =
false),XAServ erResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(ServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=
(state=rolledback,assigned=cgServer),xar=weblogic.jdbc.wrapper.JTSXAResourceImpl@d38a58,re-Registered =false),XAServerResourceInfo[CPCasaeVideoWISDesenv]=
(ServerResourceInfo[CPCasaeVideoWISDesenv]=(state=rolledback,assigned=cgServer),xar=CPCasaeVideoWISDesenv,re-Registered = false),SCInfo[integrationCV+cgServer]=(state=rolledback),
properties=({weblogic.jdbc=t3://10.15.81.48:7001, START_AND_END_THREAD_EQUAL=false}),
local properties=({weblogic.jdbc.jta.CPCasaeVideoWISDesenv=weblogic.jdbc.wrapper.TxInfo@9c7831, modifiedListeners=[weblogic.ejb20.internal.TxManager$TxListener@9c2dc7]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=
(CoordinatorURL=cgServer+10.15.81.48:7001+integrationCV+t3+,
XAResources={JMS_FileStore, weblogic.jdbc.wrapper.JTSXAResourceImpl, JMS_cgJMSStore, CPCasaeVideoWISDesenv},NonXAResources={})],CoordinatorURL=cgServer+10.15.81.48:7001+integrationCV+t3+): javax.ejb.EJBException: nested exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.
at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1844)
at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:227)
at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:197)
at com.bea.wlwgen.PersistentContainer_7e2d44_Impl.ejbStore(PersistentContainer_7e2d44_Impl.java:149)
at weblogic.ejb20.manager.ExclusiveEntityManager.beforeCompletion(ExclusiveEntityManager.java:593)
at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:744)
at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1069)
at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:118)
at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1202)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2007)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:257)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2610)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Caused by: javax.ejb.EJBException: nested exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.
at com.bea.wlw.runtime.core.bean.BMPContainerBean.doUpdate(BMPContainerBean.java:2021)
at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1828)
... 18 moreHi Lucas,
Following is the information regarding the issue you are getting and might help you to resolve the issue.
ADAPT00519195- Too many selected values (LOV0001) - Select Query Result operand
For XIR2 Fixed Details-Rejected as this is by design
I have found that this is a limitation by design and when the values exceed 18000 we get this error in BO.
There is no fix for this issue, as itu2019s by design. The product always behaved in this manner.
Also an ER (ADAPT00754295) for this issue has already been raised.
Unfortunately, we cannot confirm if and when this Enhancement Request will be taken on by the developers.
A dedicated team reviews all ERs on a regular basis for technical and commercial feasibility and whether or not the functionality is consistent with our product direction. Unfortunately we cannot presently advise on a timeframe for the inclusion of any ER to our product suite.
The product group will then review the request and determine whether or not the functionality/feature will be included in a future release.
Currently I can only suggest that you check the release notes in the ReadMe documents of future service packs, as it will be listed there once the ER has been included
The only workaround which I can suggest for now is:
Workaround 1:
Test the issue by keep the value of MAX_Inlist_values parameter to 256 on designer level.
Workaround 2:
The best solution is to combine 'n' queries via a UNION. You should first highlight the first 99 or so entries from the LOV list box and then combine this query with a second one that selects the remaining LOV choices.
Using UNION between queries; which is the only possible workaround
Please do let me know if you have any queries related to the same.
Regards,
Sarbhjeet Kaur -
For the past 60 days I've experienced Main Menu freeze when running more than one application at a time. iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily. No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen). I've tried booting is Safe Mode and I don't seem to have a problem. I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items. Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem. I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options. Do I have any more options?
Question: Everytime an app crashes I have the option to report it to Apple - which I usually do. But I've NEVER reported a Main Menu freeze because it never asks me to
There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
This sure sounds like a resource problem...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts? -
when using more than one tab, once I have opened a .pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the .pdf into it's own window? not a major problem just irritating.
I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier... -
Rendering Error when using more than one DataSheetView on a Enterprise Wiki-Page
Hi Experts,
how to reproduce:
Add two Custom Lists with some Fields (Add Lookup-Columns to both Lists).
Add a DataSheetView to each List and mark it as Default-View
Create a Enterprise Wiki-Page
Add a WebPart (Custom-List-1)
You will see the Content from List 1 as DataSheet-View (because it is the Default-View)
Add another WebPart below the previous added WebPart (Custom-List-2)
You will see the Content from List 2 as DataSheet-View (because it is the Default-View)
Notice that the First DataSheet has faulty Rendering. The Lookup-Columns having more than one 'Arror-Down' Image and it is even on the left. If you click into different Column, different row you get the same.
I can reproduce this behaviour anytime.
Environment: SharePoint 2013 Enterprise, IE10
If you use Development-Tools to identify first datarow of first DataSheet you can see that it has to do something with the related <Input>-Tags:
<div class="combobox-placeholder" id="jsgrid_combobox" style="left: 27px; top: 32px; width: 117px; height: 29px; border-top-color: currentColor; border-right-color: currentColor; border-bottom-color: currentColor; border-left-color:
currentColor; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 0px; border-left-width: 0px; border-top-style: none; border-right-style: none; border-bottom-style: none; border-left-style: none; visibility: inherit; ; direction: ltr; min-width:
117px; background-color: transparent;">
<input class="cb-textbox " style="width: 156px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown" class="combobox-img" style="height: 29px;"
dir="ltr" type="button" value="▼"/><input class="cb-textbox " style="width: 84px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown"
class="combobox-img" style="height: 29px;" dir="ltr" type="button" value="▼"/>
Please have a look into it. Current Workaround for me is to have a Default-ListView in first WebPart. But then Customer has to click the Edit-Button to Change the Item in the releated EditForm. This is a Show-Stopper here!
With Best Regards,
RonnyHi Ronny,
According to your description, the lookup column would render incorrectly when adding more than one datasheet view in the Enterprise Wiki page.
I tested the same scenario per your post, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Error using pretrigger when capturing more than one channel
I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so. -
Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple? -
Syntax issue when having more than 20 warnings
Hello,
when having more than 20 warnings in a compilation unit (package, procedure ...),
SQL Developer ( version 1.5.0.53)
doesn't always flag an error (like, for example, a misspelled local variable),
so instead of a compile-time error a runtime error is generated.
I tried to reproduce the situation and here is a simplified case where i've
encountered the same error.
Best regards
Alexander Andris, Prague
[email protected]
CREATE OR REPLACE
PROCEDURE PROC AS
l_arg1 pls_integer;
l_arg2 pls_integer;
-- declarations which issue PLW-07204 warnings ...( 20 or more ...)
cursor c1 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c2 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c3 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c4 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c5 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c6 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
procedure proc1 is
begin
null;
end;
BEGIN
l_arg_notdef := 42;
-- next line would not be displayed.
dbms_output.put_line (
'Error in SQLDev 1.5.0 - error on the assignment line not flagged '
|| ' by the compiler when preceded by > 20 warnings ...' ||
' (Error not shown in navigator.Same behavior also in SQLDev 1.21 ...).');
-- So, when lines 5 - 23 are commented out then line 31 is flagged as an
-- error (PLS-00201), otherwise not (runtime error only).
-- When working on a large package with more than 20 warnings and a lot of
-- code, to find an error like a misspelled local variable one would need to
-- a different IDE.Hope it is not difficult to fix this quickly ...
-- Details:
-- client platform: Windows XP
-- SQLDev: Version 1.5.0.53 Build MAIN-53.38
-- db.: Oracle 10.2 on Windows
END PROC;Unfortunately, that's the intended behaviour.
After complaining about errors not being reported in previous versions, they did add the "Only first 20 issues are reported" warning, but unless you know that can happen, almost nobody will notice.
I keep advocating for reporting errors on top, next any warnings, until having used up the 20 spaces. If necessary, they could compile first with warnings turned off, then again with warnings turned on.
I don't think I ever put a request for this on the SQL Developer Exchange, so take a look there if you're up for it.
Also mind you can turn the warnings off yourself inside the preferences, so they won't bother (nor help) you again.
Regards,
K. -
Startup issue when having more than one database on machine
Startup issue when having more than one database on machine:
I’ve installed two databases.
When I shutdown one of the database and try to start it up using
Startup pfile=’…location..’;
I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
Anyone know how to get this working, i.e. starting and stopping DB without issues?
Using oracle 11gR2 on Windows 7 64bit, all is working normal.
Thanks,
Ayman
Edited by: aymanzone on Jun 15, 2011 9:27 AMaymanzone wrote:
my oracle_sid is set to the name of one of my databases
echo %oracle_sid%
shows me the name of my first database.
Still not working though.
When I start the services of both databases using Services, I can connect and run queries from both of the database.
Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
Next ... from the command prompt:
set oracle_sid=<Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
From the same command prompt session or other ....
set oracle_sid=<Other_Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Edited by: Srikanth on Jun 16, 2011 12:27 AM -
Elements 6 editor crashes when opening more than 1 file
elements 6 editor crashes when opening more than 1 file
It may be a lack of available memory (RAM). Open the Editor and click the menu:
Edit >> Preferences >> Performance
Photoshop Elements >> Preferences >> Performance (on Mac)
You can increase the amount of RAM available to elements, but never go above 90% otherwise you will have nothing left for running other open applications.
You can also allocate other volumes or an external hard drive as scratch disks which elements can then use in place of a shortage of RAM.
Click to view -
My MacBook Air shuts down when its more than half way charged and won't turn on unless I plug it in to the adapter? Why is this happening and how can I fix it?
If you really do have a Mid 2013 Mac Air model then it is still in warranty, as the standard Apple warranty is one year from date of purchase. So take it into an Apple store and have it diagnosed and fixed under the warranty. There is some type of hardware problem that only Apple can fix.
-
DOI - I_OI_SPREADSHEET, poor performance when reading more than 9999 record
Hi,
Please read this message in the [ABAP Performance and Tuning|DOI - I_OI_SPREADSHEET, poor performance when reading more than 9999 record; section and see if you have any advise.
Best Regards,
MarjoHi,
I met this issue when I tried to write vaule to massive fields of excel range.
And I solve this issue by using CL_GUI_FRONTEND_SERVICES=>CLIPBOARD_EXPORT.
So, I think you may fix it in the same way.
1. Select range in by the I_OI_SPREADSHEET
2. Call method I_OI_DOCUMENT_PROXY->COPY_SELECTION
3. Call method CL_GUI_FRONTEND_SERVICES=>CLIPBOARD_IMPORT
Cheers, -
Network or database calls are made when joining more than one table
Hi Friends,
could anybody please let me know how may networks are called when joining more than one table.
Thanks
RinkyHi Rinky,
Normally when a JOIN between two database tables is made then following steps occur:-
1) The control goes to database. Based on the JOINING and WHERE condition, an internal table is created in the DATABASE only which is filled. So here the computation is done at DATABASE level.
2) Once the internal table is filled at database level, it is sent back to the application level.
A Join operation normally minimizes the round trips to the database as most of the computation is done at database level only and results sent back to the Application layer.
<b>Thus for a simple JOIN OPERATION makes a single DATABASE call.</b>
NOTE: If you are satisfied with the explanation, then please reward points
accordingly :).
Thanks and regards,
Ravi . -
Error when inserting more than 500 characters
Hello all,
I am not sure if I should be posting here or in the Flex
Forum, so I apologize ahead of time if I am in the wrong place.
I am Using a Flex frontend and a ColdFusion backend to edit
data in a simple Access Database (for testing). I have a ColdFusion
CFC on the backend that handles everything just fine until I enter
in more than 500 characters (Actually 510) into my text area and
then I get the error "Unable to invoke CFC - Error Executing
Database Query.". Now you might be saying that either the database
field is not set to handle that many characters or the CFC is
restricting more than 500 characters, but they are not. The
database field is set to "memo" and the maxlength in the CFC is set
to 5000. I am wondering if has something to do with Access
databases I do not know because I don't use them that often.
I have tested this over and over and it only throws the error
if I exceed 510 characters in the Flex TextArea.
Any thoughts are appreciated.
The CFC code is below I didn't add the MXML because I figured
there was nothing special about the TextArea block:Very strange as to why this worked but just in case someone
else has the same problem here is how I got it to work.
I just changed this line:
rss_copy = <cfqueryparam value="#arguments.rss_copy_edit#"
cfsqltype="cf_sql_varchar" maxlength="5000">
to this:
rss_copy = '#arguments.rss_copy_edit#"'
and it worked just fine. -
Error when sending more than 500 Characters
Hello all,
I am not sure if I should be posting here or in the
ColdFusion Forum, so I apologize ahead of time if I am in the wrong
place.
I am Using a Flex frontend and a ColdFusion backend to edit
data in a simple Access Database (for testing). I have a ColdFusion
CFC on the backend that handles everything just fine until I enter
in more than 500 characters (Actually 510) into my text area and
then I get the error "Unable to invoke CFC - Error Executing
Database Query.". Now you might be saying that either the database
field is not set to handle that many characters or the CFC is
restricting more than 500 characters, but they are not. The
database field is set to "memo" and the maxlength in the CFC is set
to 5000. I am wondering if has something to do with Access
databases I do not know because I don't use them that often.
I have tested this over and over and it only throws the error
if I exceed 510 characters in the Flex TextArea.
Any thoughts are appreciated.
The CFC code is below I didn't add the MXML because I figured
there was nothing special about the TextArea block:The code should be in my initial post.
Very strange as to why this worked but just in case someone
else has the same problem here is how I got it to work.
I just changed this line:
rss_copy = <cfqueryparam value="#arguments.rss_copy_edit#"
cfsqltype="cf_sql_varchar" maxlength="5000">
to this:
rss_copy = '#arguments.rss_copy_edit#"'
and it worked just fine.
Not the best solution but it works fine now all the
same.
Maybe you are looking for
-
In a single line - More than one value in script
Hi, In script, I have to print 3 materials in each line. For example, if I have 10 entries in an internal table GT_MARA. I need to print as below. 1. Material A 2. Material B 3. material C 4. Material D,,,,,, 10. Material K At the moment I a
-
Need solution for using Symbol LRT3840 with Apps 10.7 and/or 11i?
Any suggestions for using Symbol's scanner/terminal with Oracle 10.7 and/or 11i? The symbol unit runs a telnet session (with a 1/4 viewable area). I'm looking for some alternate screen templates and/or a software solution that will allow me to remap
-
Need profit center HIERARCHY FM
Hello Experts, I know the profit center and profit center group. Could you tell me which function module i have to use to get the complete hierarchy? Regards, Amit
-
Anyone know anything about BLENDER (3d app)
Hi I'm wondering, Does anyone know anything about Freeware 3d App Blender? does it Run on the new Intel Mac Mini Machines running Tiger 10.4.5 ? I've tried there boards but got no response.... Cheers Keiran
-
Device Central will not load web pages
Started using Device Central to view a web site I'm designing for a client. Loading within Dreamweaver and Device Central, pages will not load, the program stalls. I have had no luck in finding information on-line and cannot re install the applicatio