Cannot receive workitems after workflow has triggered

Hi experts,
I've met a problem that after a workflow has triggered, no one can receive the workitem. I check workflow log via SWIA and it shows that for example Paul has received it. But when Paul goes to SBWP the workitem doesn't exist.
The same thing happens when forwarding workitem to others.
Pls help. Thanks in advance!
Wang

Hello,
"I check workflow log via SWIA and it shows that for example Paul has received it. But when Paul goes to SBWP the workitem doesn't exist. "
This shouldn't happen. What does SWI5 say?
I doubt it has to do with SWWCOND but I would fix that in any case (using debug, as suggested by Rob).
regards
Rick Bakker
hanabi technology

Similar Messages

  • Workflow Shows as 'In Progress' after Workflow has been completed.

    Hello All,
    I have created a custom workflow using SharePoint Designer. Within this workflow I have multiple 'approval process' tasks. In theory this was so that once the first user had approved the item then the next would be prompted to approve the item, and
    so on. The users that the item must be approved by are set when the item is submitted initially.
    Just so anyone reading this knows I have no formal experience/education in SharePoint workflow design, but I would like to think I know my way around SharePoint(in general) at this point.
    My problem is, the company I work for is just starting out using SharePoint workflows, and from what I understand workflows that are 'In Progress' are related to server performance. I noticed today that there are 5 items in the list which
    under the 'workflow status' column display that they are 'In Progress' which is entirely correct. However, when I go to -> 'List Settings' -> 'Workflow Settings' this workflow is showing 8 workflows 'In Progress'.
    Thank you to anyone who is able to help me with this,
    James

    Hi,
    According to your post, my understanding is that workflow shows as 'In Progress' after Workflow has been completed.
    To send the task one by one, you can select one at a time(serial) when you select Task Process Participants.
    Per my knowleadge, when you go to -> 'List Settings' -> 'Workflow Settings', it show all the workflows you associated to the list.
    To see the running workflow, you need to select an item, right click the title, and then select the workflow.
    However, each workflow enstance can only start once on an item.  In other word, you can not start the same workflow again untill the previous one is completed.
    As you said, workflow shows as 'In Progress'.
    Please make sure all the users have approved the tasks.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • TS3276 cannot receive mail after i sent a large photo.   A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out.  i have read apple support and done everything they suggest.  Help!

    I cannot receive mail after i sent a large photo.   A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out.  i have read apple support and done everything they suggest.  Help!

    How large is 'large'?

  • Cannot receive faxes after upgrading to 10.5.8

    Since upgrading, I cannot receive faxes on either powerbook. Sending works fine.

    I too am having this problem under 10.5.8
    Apple would appear to not know about it because they will only provide help under a warranty, Applecare or on an incident subscription basis.
    Forget the Apple help documentaion. It just suggests that you reinstall the System software. That doe not help. Been there, done that. Further documentation suggests contacting Smith Micro, the purveyors of Fax Stf. They had me look in the Applications folder to see if FaxStf was lurking there. It is not. SM say the last time that they supplied Fax software was as part of Jaguar.
    You can purchase Stf from Smith Micro for $49.00 $20.00 if you have a registered earlier version. That would have the benefit of tech support and full fax controlling options. smithmicro.com

  • Missing ObjectKey OCCATIONALLY after workflow is triggered

    System is ECC 6.0.
    We have a customer workflow works fine most the time, but fails OCCATIONALLY with following message in workflow log:
    Start Event Received                                     No errors 
    (Sub)workflow created                                 Variables of the work item text cannot be generated  
       GET_VALUE_REF                                       Error in the evaluation of expression '<???>&BUS1505.IDENTKEY&' for item '1' 
          EVAL_CONTAINER_ACCESS_CODE       Unable to determine the value of component '' 
    (Sub)workflow created                                  No errors occurred -> Details in long text 
    Workflow started                                           No errors occurred -> Details in long text 
    Exception occurred                                        Error when starting work item 000000966301 
       PROCESS_NODE                                         Error when processing node '0000000969' (ParForEach index 000000) 
          CREATE                                                   Error when creating a component of type 'Step' 
              CREATE_WIM_HANDLE                       Error when creating a work item 
                 CREATE_VIA_WFM                    Error within method CL_SWF_RUN_WIM_BATCH->_CREATE_WORKITEM_CONTAINER 
                     EXECUTE                                Source (expression '&BUS1505.CONTRACTNUMBER&') of binding assignment is not available 
                         CL_SWF_BND_BINDING->EXECUTE Source (expression '&BUS1505.COMPCODE&') of binding assignment is not available 
                              GET_VALUE_REF                         Error in the evaluation of expression '<???>&BUS1505.COMPCODE&' for item '1' 
                                   EVAL_CONTAINER_ACCESS_CODE Unable to determine the value of component '' 
                         GET_VALUE_REF Error in the evaluation of expression '<???>&BUS1505.CONTRACTNUMBER&' for item '1'
                             EVAL_CONTAINER_ACCESS_CODE Unable to determine the value of component '' 
    Checked contain for BUS1505, it does have proper value in the key:14003000000000344
    Anyone have experience this in their system? what is the solution?
    Best Regards,
    Jimmy Sun

    Hi,
    Got the same issue. Get the messages below for BOR ZKNA1 (copy of KNA1)
    Workflow System            GET_VALUE_REF
    Workflow System            EVAL_CONTAINER_ACCESS_CODE\
    Strange thing is that it works in development but not in Quality. All config was transported though.
    Any help appreciated since I am not very familair with WF.
    Thanks

  • No WorkItem, No Workflow is Triggered in HR Process and Form Sceniro

    Hi
    Iu2019ve an issue in triggering a workflow on HCM (i.e.) HR Process & form scenario. Initially the workflow is worked fine when the HCM application is in Dynpro for Java tech. But after the installation of  Enchance.pack 2 where the same Std.application is replaced with Dyn pro for ABAP, but the same workflow is not working.
    Is there any addition setting do I need to perform to make the workflow to be triggered from application.
    I've checked all the pre-requisites(i.e.) Event linkage..etc, everything is fine
    Does anyone come cross this scenario? I would really appreciate for any good suggestion. Definitely I will reward a points for any good solution.
    Thanks
    Kamalbabu

    Hi KB,
    dont knw on Dynpro side,
    but u cld ask BASIS on whether the services are active from SAP side.
    Aditya

  • Substitute not receiving workitem for Workflow WS20000075 - TS20000166

    Hello Friends
    With rgeard to the Workflow WS20000075 and the task  TS20000166  , we find that the substitutes are not receiving the workitem .
    only the agents determined from the PO release strategy are getting the workitems.
    But the substitutes of these agents are not receiving the workitems.
    I checked the table HRUS_D2 which is valid and also active.
    i also notice that in table SWWORGTASK , the ORG_OBJ field is set for the POSITION .  does this mean , personal substitue will not work  as the agent determination is on POSITION level ?
    Please assist.
    thanks
    Raghu V
    Edited by: Raghunandan Vasudevarao on May 2, 2011 8:28 PM

    "In release strategies, what is the object type maintained ? Maintain the same object type when assigning substitutes. "
    Hello Suresh ,
       In the release strategy  , we have assigned the Object as " S "  which is a position and assigned the corresponding POSITION ID .  So does this mean the substitute assignment should be on a POSTION level rather than  a user specific level ?  If yes , How do we do that ?
    " Please check whether the substitution maintained is ACTIVE or PASSIVE.  "
    Hello Guddan ,
    The substitution is ACTIVE  , Iahev confirmed.
    thanks,
    Raghu V

  • Cannot receive texts after new iOS 7 , checked everything help section told me to do!

    Messaging to other iPhone users is not working after ios7 upgrade. I receive them on my ipad but not phone. I have a 4s. I have followed all suggested troubleshooting and still not working!  Any ideas?

    The same issue I had for an iPhone4.
    During iOS7 upgrade connection to iCloud was always failing so after many retries I skipped it thinking it can be done later when upgrade has been completed.
    But no. I am wrong.
    Even connection to apple store is no longer possible after I signed out and tried to sign in again. Getting error about failed to contact server.
    I was trying since last night 10 hours ago and trying again now for many times with no success.
    Why is that Apple?

  • Check that GI cannot be cancelled after GR has been done.

    Hi,
    The user is complaining that even though he has posted goods receipt for the delivery of a stock transfer order, he is able to cancel the goods issue using 'VL09'. The system should block cancellation of goods issue after goods receipt is complete. Any special setting for this?
    Thanks and regards,
    Kasturi

    hi friend
    tell me clearly
    with regards
    dinesh

  • Cannot receive iMessages after update to iOS7

    After updating my iPhone 5 to iOS7, I can receive iMessages only on my phone number and not on my main email.
    Hellp!

    Where are you stuck?
    1. Settings>General>Software Update
    2. Download software
    3. Agree to Terms and Conditions
    4. Select "Install"
    5. Verifying update
    6. Apple Logo + progress bar
    7. Black screen
    8. Apple Logo
    9. Apple Logo + progress bar
    10. Apple Logo
    11. Slide to setup
    12. Update completed
    13. Tap "Continue"
    14. Choose a Wi-Fi Network
    15. Update iCloud; enter iCloud password
    16. You will be prompted to setup iCloud Keychain
    17. You will be prompted to "Create a Passcode"
    18. Select "Don't Add Passcode"
    19. Welcome to iPad (Get Started)
    20. Home Screen

  • Ask user for input after Workflow has already started?

    I am in the process of creating an "expense report" declarative workflow in Designer. I want to have it start automatically when a new document (here, an Excel file) is uploaded to the Library. I also want some user input (e.g. "Is this
    ER urgent?"). Is there a way to this without requiring the workflow to start manually?

    You can have required information as metadata on your library and user needs to fill those information. You read that information in your workflow.
    Amit

  • X200 cannot sleep/hibernate after WWAN has been used

    Since upgrading to Windows 7 I experience problem using Sleep or Hibernate.
    If I have been using WWAN (the Ericsson card) the computer will not Sleep or Hibernate afterwards (sometimes it will work, maybe 1 out of 10 times). The computer will start preparing for Sleep/Hibernate and will switch off the screen. But it never finished (caps lock will not work, but the HD LED can be seen blinking every 3 second or so) and will stay on until the battery is drained or a hard reset is performed.
    It was working ok in the beginning after installing Window 7, but stopped working somes in june/juli this year.
    /MF

    HI, thanks, but I know I can set a new password. I just wanted to get my old one back cos I have used it a long time & can therefore remember it.

  • IPhone vs Android.  Cannot receive texts after having iPhone now switched to Android.  Unregistered device, turned off iMessage, what now?

    I had an iPhone for 1 week.  Switched from an Andriod to Apple for 1 week. Went back to Android.  Turned off iMessage, unregistered the device...  STILL CANNOT GET TEXTS FROM APPLE USERS!  Advice?

    ALSO!  Had everyone double tap on the message they sent and confirmed that they sent it via SMS.

  • CANNOT RECEIVE MESSAGES AFTER UPDATE iOS5

    this is soo frustrating....any help will be much appreciated!!!!

    OK, I've discussed this problem extensively with my brother who is somewhat of a Mac expert (30 years in his Mac based recording studio). He thinks there might be a link between the Quicktime update and the mail problem, since mail uses quicktime (quicktime messages open right in the mail window).
    I wasted a whole day on this yesterday and even reinstalled Tiger from my original disk, then did the updates. Tried mail, same problem. Something in my mail on that ONE computer is telling my server to reject my outgoing mail attempts. Finding someone in Roadrunner (my isp) tech who knows anything about Macs is virtually impossible.
    I'm on my eMac at home right now. We moved to the country last March and I have not done any of the updates since then because dial up won't stay connected long enough for Apple's HUGE update files. Guess what.... no problems with my mail (or anything else) on this Mac.
    Today I will start over by reinstalling my original Tiger, then go through the painfully slow process of downloading and installing the system updates UP TO the one that came out last week. I guess I could buy some Apple tech support and try to solve the problem THEY created! I'm trying to run a freakin' business here... I really don't have time for this! Thanks a lot Apple!
    eMac   Mac OS X (10.4.7)   Once threw an iMac off the 2nd story balcony.
    eMac   Mac OS X (10.3.9)  
    eMac   Mac OS X (10.4.7)  
    eMac   Windows XP   How come when I go back and edit, it keeps putting more stuff down here?

  • Cannot receive voicemails unless I call my number

    Cannot receive voicemail after I deleted old messages I have to call my phone number to get voicemail

    voicemail is a carrier feature, give them a call to resolve.

Maybe you are looking for