Cannot record vocal from interface  help!

Im using logic pro 8 on an imac 2.66 ghz dual core with a m audio pro fire 610.. for some reason im not getting signal from the pro fire into the logic record enabled channel. it shows up strong in the mixer section of the pro fire but nothing on the logic screen.  I did upgrade to snow leopard before i have done and vocal work but the main thing is that it looks strong at the outputs of the pro fire.
I'm using a Nady vacuum mic with it's own transformer and a M audio pre amp before it gets into the pro fire and again everything looks good coming out of the pro fire.
I'm creating the track as an audio track. The pro fire is configured in the audio preferences of logic as required.
I'm stumped!! 

my m audio tampa pre amp has a very nice compressor set up so i go from there into the line in's of the pro fire and as i said the signal shows up just fine on the pro fire mixer software, but i agree with you, i must not have the right input selected on logic.
Here's what I do:
I hit the + sign which creates a new track
I choose it to be an audio trac in mono
i've record enabled it as well as monitor enabled it
I  click the red R on the track and click the round record button in the transport
all i get is a flat line in the region when recording.
I've done all this on my existing project as well as creating a new project just with vocals
but still nothing.
I really believe it has to do with logic... I'm stumped, I've recorded vocals so many times this way but now nothing
I appreciate all suggestions.  thanks,

Similar Messages

  • How do I record vocals from a USB mic on logic pro x

    How do I record vocals on Logic Pro x using a USB mic

    Honestly... have you bothered to read any of the Logic manual?
    First you have to configure Logic's audio Preferences to set the USB Mic as the Input device, then create a few audio tracks.
    There a plenty of online help videos on You Tube.

  • HT4059 my iPad mini cannot download books from iTunes - help

    my iPad mini cannot download books from iTunes - help

    Hi, debikay45. 
    Test to see if you can download a free application from the App Store.  If this was successful, test downloading the book again.  Try closing all open applications and power cycling the device, test the results.  Make sure you have an active Internet connection.  If these results were unsuccessful, see the steps in the article below that refer to iOS. 
    Isolate the issue: (Mac OS X, Windows, iOS)
    Make sure the issue is with the iTunes Store only. (You need an Internet connection to access the iTunes Store).Open a secure website to test if you are online as is necessary for the iTunes Store. This also tests if the main ports 80 and 443 are accessible. If the website works but the iTunes Store does not, it is most likely a firewall blocking the iTunes software or servers. If this is the case, follow the steps in the "Blocked by software firewall" section below.
    Test using another device.If possible, another device, ideally on a different network, would help troubleshooting any iTunes Store issues most efficiently. If another device on another network has issues, the iTunes Store may be undergoing maintenance, and will be available soon.
    Test using another network.
    Connect your computer or device to another network and testing helps determine the next step. This is also helpful if multiple devices are affected.
    If your device can connect to Wi-Fi and a cellular network, larger downloads may not be possible over the cellular network.
    If the issue disappears while connected to another network, you may need to work with your support options to open access to:
    itunes.apple.com
    ax.itunes.apple.com
    ax.init.itunes.apple.com
    albert.apple.com
    gs.apple.com
    ax.phobos.apple.com.edgesuite.net
    mzstatic.com
    Note: iTunes may use the fully qualified version of these addresses for additional security.
    iTunes uses well known ports and these ports may need to be opened for iTunes: 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999.
    It is critical that your date, time, and time zone be correct:Windows:
    Click Start and then click Control Panel.
    Click "Date, Time, Language, and Regional Options" and then click Date and Time.
    Click the Date & Time tab.
    Make sure that the date and time settings are configured to use the current date and time and then click OK.
    Mac OS X:
    From the Apple () menu, choose System Preferences.
    In System Preferences, click Date & Time.
    Enable the option to "Set date and time automatically" if it is not.
    Click the Time Zone tab and adjust the time zone to match your current location.
    iOS:
    From the home screen, tap Settings > General > Date & Time.
    If the option exists, turn off Set Automatically.
    Verify the time zone and time (in the status bar) are correct for where you are currently.
    If not, adjust the incorrect setting accordingly.
    If everything was correct and the option exists, turn on Set Automatically.
    Remove any restrictions that may be causing the issue:
    Windows:
    It is recommended you use iTunes from an administrator account.
    Refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
    You can also check using iTunes Diagnostics if you are recognized as an administrator by iTunes.
    Mac OS X:
    It is recommended you use iTunes from an administrator account. To become an administrator account, from the Apple () menu, choose System Preferences.
    In System Preferences, click Accounts.
    You may need to unlock the lock in the bottom-left corner of the window to make changes. If you can unlock the lock, you are already an admin user.
    Under the account you are using, it may say "Standard." Enable the option to "Allow user to administer this computer" to make the user an admin account user.
    From the Apple () menu, choose Log Out.
    Log back in and return to using iTunes. Test to see if the issue is resolved.
    iOS: Restrictions can limit your ability to purchase some content. Check restrictions via Settings> General > Restrictions if you're unsure about those settings.
    After isolating the issue to iTunes by following the above steps:
    If the issue still occurs and iTunes displays an alert message with a specific code, please see the section below titled "Specific Conditions and Alert Messages" for additional troubleshooting steps.
    If the issue is still not resolved and there is no specific code or alert message, you can visit the iTunes Store Discussion Board to try to find additional information for help resolving your issue:
    You can also contact AppleCare to discuss your support options. Depending on your product’s coverage status, you may need to pay for support.
    iTunes Store Discussion Board (Mac)
    iTunes Store Discussion Board (Windows)
    New routers or a new Internet Service Provider (ISP) may limit your ability to connect to iTunes Store. Let your router manufacturer or your ISP know about the ports and servers in this article and confirm that they are compatible.
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • How to Hear Metronome in Headphones While Recording Through Audio Interface - Help!

    Hey everybody,
    So I've been trying to work through this problem for 3+ hours now and I'm stumped. It's very frustrating as it is such a simple problem. Right now I'm recording acoustic guitar through an audio interface - guitar sound goes to microphone, microphone goes to interface, interface goes to audio jack in Macbook. Pretty simple setup. I can even insert a splitter into the audio jack on the Macbook which will allow me to hear what I am playing through the interface in my headphones, which is what I wanted. However, when I hit record and the metronome starts playing, as I want it to, I can't get the metronome to play through my headphones - they will only play through the speakers. How can I get around this? Is it even possible, or do I need an audio to USB interface so I can have a set audio in (through the USB) and a set audio out (through the audio port)? Again, your help would be much appreciated as I am completely stumped.
    Cheers!

    In Logic Pro 9 (and X) you can assign different devices to the In- and Output, so I don't understand why you wouldn't be able to get sound in through the microphone and out through the headphones. You can even combine the ouputs into a Multi-Output device to send the same sound simultaneously to all outputs.
    You can also aggregate all your in- and outputs into an Aggregate Device, then you can use any of your outputs and any of your inputs inside the same Logic project (on the channel strips).
    Setup in Audio MIDI Setup (separate app, part of any OS X install, can be found in the Applications>Utilities folder)
    Setup in Logic Pro>Preferences>Audio>Devices (apart from colorscheme, it's the same in LP 9 and LP X)

  • Clicks and popping with recording and USB interface-HELP!!!

    I've submitted this twice, got some responses, but has twice been ignored into oblivion. I apologize for the reposts, but this is VERY IMPORTANT, and I've been struggling with this issue for MONTHS now dealing with countless hours of lost time trying to fix it to no avail.
    I'll try to include as much detail as possible.
    I use:
    MacPro 2 x 2.66 Dual-Core Intel Xeon
    3 GB memory
    Logic Express 8.0.2
    245.13 GB empty space on Hard Drive
    THE PROBLEM:
    When I record, I get computerized clips/pops
    http://www.moogiex.com/clickpop.mp3
    http://www.moogiex.com/morecackling.mp3
    I record via a PreSonus Audiobox USB. This problem did NOT start when I got the AudioBox, but several months after.
    When I simply monitor the sound going through the box, the sound is fine.It's something between the Box, and the computer output. My guess is some incompatibility with Logic Express or Core Audio and the AudioBox.
    It is NOT the microphone or the cable (the pops occur with anything going in, 1/4", XLR, different inputs).
    The clicks START with Logic Express. If there are any recording program open when Logic Express is open, and I record, I get the SAME pops.
    It did this both under 10.5.6, 10.5.7, and now 10.5.8.
    It is NOT clipping.
    When I'm recording with LE:
    —There's 1.27 GB of FREE Memory while I'm recording.
    —Logic Express is only using 6.7% of CPU while recording (of only one of the four processors), and about 90-95% of CPU space is free on all four processors.
    —This happens on ANY audio input, and it doesn't matter how many other tracks, how long it is. I just started a brand new file and it does it.
    —This happens when I use ANY input into my computer, but is STARTED by LE.
    Here are my Logic Preferences
    Core Audio- ENABLED
    System Memory Requirement 66.0 MB
    Device: AudioBox USB
    I/O Buffer Size: 1024
    I/O Safety Buffer- UNchecked
    Recording Delay: 0 samples
    Universal Track Mode- CHECKED
    24 Bit Recording- CHECKED
    Software Monitoring- CHECKED
    Independent Monitoring Level- Checked
    Process Buffer Range: Large
    ReWire Behavior: Live Mode (Higher CPU Load)
    Maximum Scrub Speed: Normal
    Scrub Response: Normal
    There is *no* driver with PreSonus' AudioBox. It is simply "compatible." Here's what System Profiler says:
    AudioBox USB (plugged into my Mac Pro's front bottom port):
    Product ID: 0x0301
    Vendor ID: 0x194f
    Version: 1.08
    Speed: Up to 12 Mb/sec
    Manufacturer: PreSonus Audio
    Location ID: 0x00200000
    Current Available (mA): 500
    Current Required (mA): 500
    Here's what I've tried:
    —Disabling CoreAudio, shutting LE 8 off, restarting LE 8, enabling CoreAudio again. This worked ONCE. It hasn't worked since.
    —Disabling CoreAudio, shutting LE 8 off, SHUTTING DOWN, RESTARTING, opening LE 8, enabling CoreAudio again. This also worked ONCE. It hasn't worked since.
    —"CPU Saving Mode"
    —I/O Buffer to 256, 512, and 1024 (default) (IMPORTANT?—speed of popping actually INCREASES with larger buffer?)
    —I/O Safety Buffer checked and unchecked
    —Changing Recording Delay samples
    —Pretty much fiddling with any of the controls
    —Disabling Airport does nothing (was previously working fine with Airport running)
    —Quit all applications, open up QuickTime (pro) or Audacity, and record something. It records perfectly. I go back to LE and the clicks and pops are gone, but only until I use anything with effects, then the clicks and pops return. This works SOMETIMES.
    —Reset the preferences, and that has worked ONCE, and then the clicks and pops came back (albeit not as prominent, but they were still there).
    —I trashed all files related to Logic and reinstalled. Worked ONCE.
    —Restarting does help, but only temporarily, as soon as any pull is put on Logic, the problems return.
    —Using a different USB port. I thought this was the solution because the problem shortly went away with regular use of Logic, but problem came back.
    —Uninstalling Logic, Reinstalling Logic Express, same deal.
    PLEASE, PLEASE, PLEASE HELP. I have a lot of money sunk into all this equipment that's practically useless with this recording issue.

    Man, I feel for you on this.
    I would love to see what your pops and clicks look like in your waveform. If you can take a snapshot of it and post the pic here that might help the diagnosis.
    Your audio files certainly SOUNDS like you have a clocking problem. It really sounds like your CoreAudio driver/MacPro and your USB interface are not locked up in sync - as in: which is master and which is slave? I know some interfaces include a software control panel that allows you to set the status of the interface clock to slave to the computer or to be the master. It sounds like yours doesn't come with drivers but is there any control panel for this Presonus device?
    Another place to check is in Applications>Utilities>Audio Midi Setup
    On the left under "Properties for <your interface>" what does it say for the clock source?
    Also in this panel, to the right it should have a button for "configure device". What happens when you click it? For example in my case it automatically launches my Apogee Duet Maestro control panel. In your case it might launch something similar, although I think you mention that you never installed anything, which I find strange to begin with - that this thing should just work out of the box with no driver at all.
    I've struggle with w similar problem with my Apogee Duet, although nothing of this magnitude, maybe 4 or 5 clicks per 3 minutes of audio and these turn out to always be sample drops where 5-10 samples in a row are all the same in the waveform, as if my interface and computer stopped talking for a milli second. I did find that if my Apogee Duet was chosen as the default or system output in the Audio Midi Control Panel I mentioned above then the clicking was more frequent, as if choosing the audio interface for any system output caused a conflict with choosing it for Logic. I thought this was strange but you might want to investigate that further too.
    At any rate, it does sound like a digital clock syncing issue to me by the sound of your audio. What effect does changing the sample rate of the recording have on the problem?
    Let me know if any of this leads to anything.

  • Cannot record audio from wave on Satellite A100-PSAA9

    Why I can not record realtime Audio Conference with the included RealTec Driver on my Toschiba A100?
    Record Options given just, "Microphone-Line In-CD" but Wave is Missing, why?
    I have another Notebook from Asus with RealTec Driver and there is it possible, on my Toshiba not, why?

    Dear all,
    I've read so many posts where people want to record music they hear on their Satellite Notebooks (either wave, or sounds from the internet) and it seems that cornelius solved the "realtec driver" problem - that doesn't meen that it's really a problem of realtec - (where there are only three mixer categories) quite well. But I tried a little - because I don't want to spend 30$ for a new driver and found a cheaper solution (finally I hope, it works at least on my Satellite A100-PSAA9).
    What you need is:
    first, a program that may record your sounds to mp3 or wave or whatever, I use No23Recorder - but there are lots of other programs working very well. Second you need to buy (mine cost 1) a jack plug (in german: Klinkenstecker) with one male and two female slots. Third, a stereo cable with one jack plug at each end of it (2)
    Than you can start recording by putting the jack plug into the headphone slot of your Notebook; than putting the stereo cable into one of the female slots of the jack plug and the other one into the microphone slot of your Notebook. To listen to the things you want to record, put a headset into the free slot of the jack plug - and start recording ;-) !
    So if you have enough money and you don't like a bit of cable salad, than I suggest you choose cornelius's way. If you are a poor student like me, perhaps you should try mine?
    Cheers, Kat

  • Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings

    Hi All, 
    I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated. 
    Best regards,
    Rajiv Arora. 

    ra33,
    I am very glad to help you with this. 
    According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode.  You can manually select to record to the SD cards, but only in the Manual or Cinema modes.  If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
    If there is anything else I can help you with, please let me know.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • TS5459 How do you get vocals from an ext mike/amp to record onto an audio track?

    How do you get vocals (from an ext mike/amp setup to record decently onto an audio track? I had no problems doing this with my 2008 IMAC & Logic Pro  Studio 8, but can't seem to do it with my new IMAC & Logic X. Very frustrating.

        The Korg 1600 doesn't seem to have a USB connection. It does have S/P DIF "IN" & "OUT", (which I have never used) and a SCSI site. With my older system, I had the IMAC 1st jack go directly to the Peavey or sometimes to one of the 8 imputs on the KORG 1600......so whatever I had prepared on LOGIC &/or ITUNES would play out. The 2nd IMAC jack connected to the  MASTER OUT jacks on the back of the KORG 1600. The KORG 1600 acted as an interface. Vocals via microphone, or guitar, or instruments from the Triton Synthesizer went into the 1600 & recorded onto the Logic project  Also on the back of the KORG 1600 was   MONITOR "RT & LT"  output jacks that are connected to my Peavy mixer that in turn plays out through speakers.
        The Logic Preferences/Audio is as follows:        Devices is highlighted
                                                                              Output device: ;Built-in output
                                                                              Input device: Built-in microphone
                                                                              I/O buffer size: 128
       Thank you for trying to help me with this and for your patience. . (I'm good with music & other things, but not with computers.)

  • Open script cannot get connection from the brower helper after 15 seconds.

    Error:
    ===
    Open script cannot get connection from the brower helper after 15 seconds. Do you want to continue waiting for the browser to load?
    Please Note:
    ========
    1. I have tried this only on IE
    2. I am running OATS on a Remote desktop
    Situation:
    ======
    Trying to stop the recording
    Try to get xpath of an object using Inspect Path
    Setup details
    ========
    Windows XP 5.1 Service Pack 3, x86
    OpenScript 12.1.0.1.383
    Internet Explorer 8.0.6001.18702
    FireFox 13.0.1
    Mitigation steps done till now:
    ==================
    1. Disabled windows firewall
    2. Disable XSS filter setting
    3. Restarted the ATS services (3 of them)
    4. Run the Open Script Diagnosis Tool (PS: There are 3 errros even after running it. The 3 errros are listed in the workspace_log log file snippet below...)
    Error in worspace_log:
    =============
    To Change setting:
    Go to Tools > Internet Options and Choose Security Tab
    Select the Zone to modify and Press Custom level
    Find Enable XSS filter Setting - Select Disable and click Ok
    !ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
    !MESSAGE Failure found when diagnosing Oracle EBS/Forms Load Testing Forms LT Diagnoser
    !ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
    !MESSAGE Did not auto-fix the problem.
    !ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
    !MESSAGE Suggestion for fixing: Please change your Java proxy setting to Use Browser Settings
    Aprreciate help on this.

    To resolve this, you need to reconfigure the "Oracle Application Testing Suite Helper Service" (OATSHelperSvr) to start as a user who has privledges to run open script tests rather than the default SYSTEM user.
    Reconfiguring the OATSHelperSvr Service:
    1. Open the services panel (Start > Run > services.msc)
    2. Find the Oracle Application Testing Suite Helper Service
    3. Right Click > Properties then select the Log On Tab
    4. Specify an interactive user that has rights to run OpenScript (test by logging in as that user and running tests):
    5. Click OK
    6. Restart the service after dialogs are closed by Right Click > Restart
    7. You should now repeat this process for the "Oracle Application Testing Suite Agent Service" (eLoadAgentMon) Service (Two services in
    total)
    You should now retry running the test in Oracle Test Manager

  • Recording vocals seperate from main music Mac

    I do most of my music on a Mac Pro, running Logic Studio 9, but the location of the computer really isn't a suitable space for recording vocals in.
    I can't keep lugging the Mac Pro about, so ideally I'd like to record the vocals in a suitable (different) space on to a laptop, then import the resulting audio files to the main project on my Mac Pro.
    The idea is that I'd do a stereo reference mix of the music in Logic Pro, bounce it and copy that audio file to a project on the laptop (using Garageband or Logic Express to save cost).
    With that project set up at the same tempo and sampling rate, I'd then record the vocals using the laptop. From there I'd copy the vocal audio file(s) and drop them into the music project on the Mac Pro, where I'd add any effects, processing and do the final mix.
    First question - would this work? As long as I recorded the vocals in a project set to the same tempo and sampling rate as the music, would I have any timing or sync problems when adding the vocal audio files to the original music project?
    Second question - if so, can anyone recommend any portable, Firewire 800 audio interfaces which would be suitable for recording the vocals on to the laptop? It would ony need to be 2 input channels maximum, but with at least one XLR input and phantom power.
    Any advice gratefully received!

    but the location of the computer really isn't a suitable space for recording vocals in.
    Is there any other room that would work better at your location? If so, consider buying a snake.
    The idea is that I'd do a stereo reference mix of the music in Logic Pro, bounce it and copy that audio file to a project on the laptop (using Garageband or Logic Express to save cost).
    Or reinstall Logic Pro on your laptop, but without all the content. Your license permits this, as you're not using two copies at the same time.
    First question - would this work?
    Yes. I do this often. Just be sure that both files begin at 1 1 1 1. Additionally, as I usually have many takes tracking o'dubs, I always record to WAV (BWF) files so I can use the 'move to original record position' command to align less than complete audio files.
    Second question - if so, can anyone recommend any portable, Firewire 800 audio interfaces
    Most FW interfaces are FW400. Just get an [adapter.|http://www.sonnettech.com/product/fw_adapter.html] and buy an interface which can be separately powered. There are dozens of suitable FW interfaces: one inexpensive box which I like is the [AudioFire4|http://www.echoaudio.com/Products/FireWire/AudioFire4/index.php] which is 6in/6out - they make an Audiofire2 but that doesn't have XLRs. Apogee, Focusrite, Presonus etc. all have small interfaces which you might like - just [search around|http://www.sweetwater.com/c683--FireWireAudioInterfaces/low2high]. Personally, I would avoid M-Audio.
    Good luck.

  • Cannot found url error when i try to play my camera recorded video from my iphone 4S running ios 5.01

    I got an error cannot Find url when i attempt to play my camera recorded video from my iphone 4S 32 gig. I try to restart my phone but still no luck. There was no problem previously, but suddenly i got this problem with no reason. I also unable to copy the video to my computer using itunes. So please helppp...
    Thanks a ton!!
    Note: My iphone 4S is running ios 5.01.

    See if it helps to delete the firmware file and download a new one:
    Rename, move, or delete the iOS software file (.ipsw)
    iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
    Mac OS X
    iPhone
    ~/Library/iTunes/iPhone Software Updates
    iPad
    ~/Library/iTunes/iPad Software Updates
    iPod touch
    ~/Library/iTunes/iPod Software Updates
    Note: The tilde "~" represents your Home directory.

  • Record Movie from Digital Camcorder and Audio Interface

    I need to find an easy way to record from outboard audio and video equipment, keep it in sync and create a movie file like iMovie out of it. I have a Digital Camcorder I would like to use, and I have my mic interface and I would like to record from both of those at the same time, without needing to sync it together later. iMovie will let me do this, however it will only let me record audio from an outboard device, not video (or at least, not iMovie '08); it requires use of the internal camera. Does anyone know if iMovie 09 will do this, or another Apple program that will work? I'm also running Logic Studio so I have access to Logic and Soundtrack Pro.

    With HD being the new standard, do you imagine that they might make QT able to acquire HD soon? Seems that since it plays HD, it should be able to acquire HD too. thanks for your help!

  • I had a power failure 2 days ago, have power now, but cannot send email from my iPad. Everything was fine before that. The box says cannot send mail, the user name or password for Gmail is incorrect. I haven't changed anything. I need help. Thanks

    Hi
    I had a power failure 2 days ago, my computer is running again, but now I cannot send email from my iPad using Cox or my gmail account. I am receiving mail in my Cox account but not my gmail account.It was working fine until the power failure. It keeps telling me, the user name or password for Gmail is incorrect. I have not changed anything. I don't know what is wrong. Can anyone help me? Thanks

    I agree, unplug and replug your router, then reset your iPad by holding down the sleep and home buttons, ignore the red power down slider, and wait til you see the silver apple. let it reboot and then try your connection.
    Chances are rebooting the router will help. You may also need to talk to cox. They may need to reset something on their end.

  • "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    lots of people seem to be havgin a problem sending email from iCloud webmail.
    does your email address have uppercase characters in it?
    if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

Maybe you are looking for