Cannot running the file suddenly

i can run any file before, but i dont' know why i cannot run the file suddenly. i just running a simple file as follow:
public class h {
public static void main(String[] args) {
// Display "Hello World!"
System.out.println("Hello World!");
i compile file successfully, but when i run the file , it display the following error:
Excepting in thread "main" java.lang.NoClassDefFoundError: h

bet your h.class file is not in classpath.

Similar Messages

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

Start-Process : This command cannot be run due to the error: The system cannot find the file specified.

Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
Dimitri

Hi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Error when running Get-DatabaseAvailabilityGroupNetwork "The system cannot find the file specified."

Exchange 2013 CU7 on Windows 2012.
I have a 3 server DAG (newly created) and the EAC lists each server with Is Operational = Yes.
When I run Get-DatabaseAvailabilityGroupNetwork on any of the 3 servers I get:
[PS] C:\>Get-DatabaseAvailabilityGroupNetwork
Could not load file or assembly 'Microsoft.Exchange.Data, Version=14.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
    + CategoryInfo          : NotSpecified: (:) [Get-DatabaseAvailabilityGroupNetwork], FileNotFoundException
    + FullyQualifiedErrorId : [Server=<servernameremoved>,RequestId=11e182c9-cb4a-4f48-b985-dc4be7ef97ef,TimeStamp=2/23/20
   15 10:00:53 PM] [FailureCategory=Cmdlet-FileNotFoundException] 586ECE82,Microsoft.Exchange.Management.SystemConfig
urationTasks.GetDatabaseAvailabilityGroupNetwork
    + PSComputerName        : <servername FQDN removed>
Any suggestions?

Try to run below command and see what it shows.
Get-DatabaseAvailabilityGroupNetwork -server node1.domain.com
BR/Deepak

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

Cannot run the bcp_extract.bat file OMWB created

Hello Everyone,
I am working on transferring data offline using the OMWB.
In OMWB ORACLE Model pane, i selected a user schema object, a table, and i chose Object<Generate SQL*Loader script.
Now that i was able to find my bcp_extract.bat file, i copied the contents of the directory where OMWB generated the data unload scripts onto the computer that my source database, SQL SERVER 7, is installed.
Per OMWB documentation, I modified the bcp_extract.bat file to include the source database Server Name. And I did remove the angle brackets as well. I double clicked the bcp_extract.bat file and a command window poped up and went down immediately. No data file was generated nor anything was added to the sql_load_script.bat file in the Oracle directory that was creatd by the Generate SQL*Loader Scripts.
Is there any other information that i need to modify/add in order to be able to run the bcp_extract.bat file. In fact, i thought about adding the password after -P switch and see if i can run the file, but after adding the password i still could not get the bcp_extract.bat file running.
I appreciate if someone can help me out to get the bcp_extract.bat file running.
Thank you so much!
Mitra

Hello Everyone,
I am working on transferring data offline using the OMWB.
In OMWB ORACLE Model pane, i selected a user schema object, a table, and i chose Object<Generate SQL*Loader script.
Now that i was able to find my bcp_extract.bat file, i copied the contents of the directory where OMWB generated the data unload scripts onto the computer that my source database, SQL SERVER 7, is installed.
Per OMWB documentation, I modified the bcp_extract.bat file to include the source database Server Name. And I did remove the angle brackets as well. I double clicked the bcp_extract.bat file and a command window poped up and went down immediately. No data file was generated nor anything was added to the sql_load_script.bat file in the Oracle directory that was creatd by the Generate SQL*Loader Scripts.
Is there any other information that i need to modify/add in order to be able to run the bcp_extract.bat file. In fact, i thought about adding the password after -P switch and see if i can run the file, but after adding the password i still could not get the bcp_extract.bat file running.
I appreciate if someone can help me out to get the bcp_extract.bat file running.
Thank you so much!
Mitra

When downloading my printer, I get "the system cannot find the file specified

My printer all of a sudden did work. So I decided to update. Someting went goofy. So I tried reinstalling, and now when it get to applying updates, I get the notice "The system cannot find the file specified" HELP

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists run the following tool:
ftp://ftp.hp.com/pub/printers/datfileremover/installdatfileclean.exe
And then run the installation file and check for any difference
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Excel Automation with Interop - Windows Service - Microsoft Excel cannot access the file

I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
the following error when trying to open the excel file:
Unhandled exception Occured : 'Microsoft Excel cannot access the file 'bla.xls'. There are several possible reasons:
The file name or path does not exist.
The file is being used by another program.
The workbook you are trying to save has the same name as a currently open workbook.'.'
The code snippet used to open the file:
xlApp = new Application();xlApp.Visible = false;xlApp.UserControl = false;xlApp.Application.ScreenUpdating = false;xlApp.DisplayAlerts = false;xlWorkbook = xlApp.Workbooks.Open( Filename: filePath, UpdateLinks: 2, IgnoreReadOnlyRecommended: true, Editable: false);
The console app and windows service are running on a Win Server 2008 64-bit OS with Excel 2013 32-bit installed. The service is running with a special user account, which has all the right permissions on accessed files and folders. The excel process is also
started with the same account (I cheched that one).
I already tried to do the following, but to no avail:
Run excel.exe /automation -> worked fine
Created the folders and also gave full control to the account under which the service is run (even gave full control to Everyone)
C:\Windows\SysWOW64\config\systemprofile\Desktop
C:\Windows\System32\config\systemprofile\Desktop
Configured DCOM
Excel Application -> Identity -> Specific user account
Excel Application -> Identity -> Interactive User
Excel Application -> Security -> Launch permissions -> Everyone full control
Several combinations of the above
So I really am stuck with this problem right now. Any input on this is appreciated.

I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
the following error when trying to open the excel file
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office
may exhibit unstable behavior and/or deadlock when Office is run in this environment.
If you are building a solution that runs in a server-side context, you should try to use components that have been made safe for unattended execution. Or, you should try to find alternatives that allow at least part of the code to run client-side.
If you use an Office application from a server-side solution, the application will lack many of the necessary capabilities to run successfully. Additionally, you will be taking risks with the stability of your overall solution.
You can read more about that in the
Considerations for server-side Automation of Office article.

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Office 365 App using NAPA - "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

Hello,
I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code (jquery code) in content editor web part on a page, its working fine, but when I am adding
the same code in an app, its giving me error : "The system cannot find the file specified. (Exception from HRESULT:
0x80070002)" - 500 Internal Server error.
(function () {
// This code runs when the DOM is ready and creates a context object which is
// needed to use the SharePoint object model
$(document).ready(function () {
//alert('In doc ready');
$('.attachmentButton').change(function(event){
var listName = 'UploadTest',
itemId = 2;
handleFileChange(listName,itemId,event.target.files);
function handleFileChange(listName,itemId,files){
alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
alert('files.length :=' + files.length);
var filereader = {},
file = {},
i=0;
//loop over each file selected
for(i = 0; i < files.length; i++) {
alert('In for loop');
file = files[i];
filereader = new FileReader();
filereader.filename = file.name;
alert('filereader.filename :=' + filereader.filename);
filereader.onload = function() {
var data = this.result;
var n=data.indexOf(";base64,") + 8;
//alert('n :=' + n);
//removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
data= data.substring(n);
//alert('data :=' + data);
alert('Above SPServices this.filename :=' + this.filename);
$().SPServices({
operation: "AddAttachment",
listName: listName,
asynch: false,
listItemID:itemId,
fileName: this.filename,
attachment: data,
completefunc: function (xData, Status) {
console.log('attachment upload complete',xData,status);
alert('Status :=' + Status);
if (Status.toLowerCase() == "error"){
alert(xData.responseText);
alert(xData.status);
alert(xData.statusText);
filereader.onabort = function() {
alert("The upload was aborted.");
filereader.onerror = function() {
alert("An error occured while reading the file.");
//fire the onload function giving it the dataurl
filereader.readAsDataURL(file);
alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
alert(xData.status); - gives error - "500"
alert(xData.statusText); - gives error - "Internal server error"
Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
Any suggestions, why I am getting this error in NAPA ?

Hi,
According to your post, my understanding is that you have an issue about adding attachments to list items in app.
To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
There are two articles about retrieve the list and list items in the host web, you can refer to them.
http://www.dotnetcurry.com/showarticle.aspx?ID=1028
http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
What’s more, we can also use the REST API to achieve the same scenario.
http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Java.lang.Error: java.util.zip.ZipException: The system cannot find the fil

I got maven 221 installed
i got jdk 1.6 and 1.5 installed (have tested both)
I have a strange error. All my co-workers can build but I cant. The only thing I can find is that I dont have installed BEA Weblogic but I dont want to have that installed. It should be able to run anyway.
Could someone tell me what is wrong? If you need pom.xml I got that one as well.
process-classes:
[copy] Copying 4 files to C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content
[mkdir] Created dir: C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-jar
[java] Creating an MJF from the contents of directory C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content...
[java] Compiling the files...
[java] Creating the list.
[java] Doing the compile.
[java] WLMaker-SubProcess: : Exception in thread "main" java.lang.Error: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:93)
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.main(BeanGenDriver.java:117)
[java] WLMaker-SubProcess: : Caused by: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.open(Native Method)
[java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.<init>(ZipFile.java:203)
[java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:132)
[java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:97)
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:90)
[java] WLMaker-SubProcess: :      ... 1 more
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] BeanGen code generation failed
[HUDSON] Archiving C:\hudson\jobs\albpm_ip-identity-asserter_-Build\workspace\pom.xml to C:\hudson\jobs\albpmip-identity-asserter_-Build\modules\dk.skat.ip.integration.albpm$ip-identity-asserter\builds\2010-11-2213-41-28\archive\dk.skat.ip.integration.albpm\ip-identity-asserter\1.2\pom.xml
[INFO] ------------------------------------------------------------------------

from my experience, using weblogic jars can be a pain if the full install is not on the local box.
Note that you dont have to 'install' it. Just copy the directory.
Reason is that the jar files have manifests with relative classpaths.
For an example of horror take a look at the weblogic.jar MANIFEST's classpath entry.
-Fred

SSIS package "The Microsoft Jet database engine cannot open the file"

Dear all,
I am trying to import data from an excel spreadsheet which is save on application sharing server. When I try to save same file locally (On my desktop) my package has no problem to read it. Problem comes when I change the file path to the share location
I am getting below error message,
"Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 13:26:46 Error: 2014-12-05 13:26:50.30 Code: 0xC0202009 Source: Incremental MasterStyle DL
Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database
Engine" Hresult: 0x80004005 Description: "The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data.". End Error Error:
2014-12-05 13:26:50.30 Code: 0xC020801C Source: Data Flow Task 1 Excel Source [36] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection
manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-05 13:26:50.30
Code: 0xC0047017 Source: Data Flow Task 1 SSIS.Pipeline Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-05 13:26:50.30 Code: 0xC004700C
Source: Data Flow Task 1 SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-12-05 13:26:50.30 Code: 0xC0024107 Source: Data Flow Task 1
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 13:26:46 Finished: 13:26:50 Elapsed: 3.401 seconds. The package execution
failed. The step failed."
I am trying to run this package as an sql server agent job and server is installed on my Machine. I have created proxy account with my own credential to execute it. I have full excess to the spread sheet and can open it in an excel program. Please
suggest what could be the reason why sql job is not able to access this spreadsheet. I can think of below reasons
File is password protected and I am not using its password to unlock it?
My domain account is a part of It Admin group with high previllages
when I installed my SQL server I installed it as a standalone instance of SQL server?
please advise.
regards
JKH

Hi Jahangir,
Based on the error message that "The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data.", there are two causes:
The account that SQL Agent is using does not have the correct permissions for the file or for the folder that contains the file.
Another process or user has the file open.
The following resolutions correspond to the previous list of causes:
Since you use a network path to the file (UNC), check the account permissions on the share, the file, and the folder.
The "another user" may be Microsoft Visual InterDev. Close any Visual InterDev projects that contain a data connection to the file. Please close all instances of excel file and re-run the package.
Besides, we can use a tool like
SQL Server Profiler to see what is happening when you run the package.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Recurrent error in Win32 install logs (The process cannot access the file..

hi forum !
I'm already on my third installation of Hyperion Essbase and still getting the same error within the logs :
(Jan 31, 2008 1:48:29 PM), essbaseServer7_0_0Suite, com.installshield.wizard.platform.win32.WindowsSharedFiles, err, ServiceException: (error code = -30016; message = "The process cannot access the file because it is being used by another process.
(32)"; severity = 0)
STACK_TRACE: 23
ServiceException: (error code = -30016; message = "The process cannot access the file because it is being used by another process.
(32)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32FileServiceImpl.win32SetFileModified(Native Method)
     at com.installshield.wizard.platform.win32.Win32FileServiceImpl.setFileModified(Win32FileServiceImpl.java:115)
     at sun.reflect.GeneratedMethodAccessor272.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
     at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
     at com.installshield.wizard.service.file.GenericFileService.setFileModified(GenericFileService.java:185)
     at com.installshield.product.actions.Files.setFileTimes(Files.java:1608)
     at com.installshield.product.actions.Files.install(Files.java:460)
     at com.installshield.wizard.platform.win32.WindowsSharedFiles.install(WindowsSharedFiles.java:87)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
     at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
     at java.lang.Thread.run(Unknown Source)
can use the products but this shouldn't be fine... do I have to stop a service or grant some permission ? any help is appreciated.
thanks & regards,

not having any JAVA_HOME env var. Did some checkings and :
- one machine was having Java libraries because of DB2
- the other machine was a fresh Win2003SP1 with SQL Server 2005
guess can set JAVA_HOME to C:\Hyperion\common\JRE\Sun\1.5.0 before installing Essbase, but also guess it's a documented/automatic step... wonder what I'm missing ?
doing the most basic-mode installations (defaults, automatic deployments), once I get them clean will perform more sophisticated ones. Searched the 9.3.1 doc PDFs without useful findings.

Cannot running the file suddenly

Similar Messages

Maybe you are looking for