Cannot see ACR 5.3 update in the Camera Profiles on CS4

I'm using CS4 on Windows Vista 64. I have tried the manual installation process multiple times before and after re installing CS4. I've tried the AUM with no results good or bad. I know there are two Camera Raw.8bi files that have to be installed in Vista 64 and I've been very careful to get both of the correct files to the correct destinations - I've gotten a lot of practice at this. There have been no error messages. One thing Bridge is doing now is that when I open an image, it opens it in Elements 7, which I upgraded from. When I close PSE7 and reopen the RAW file, it then opens in CS4. My big concern however is not seeing ACR 5.3 in my Camera Profiles. Any thoughts for a non-techie?

Robert, I am having a similar problem with Elements 6, in my case I have installed the 8BI file on my desktop, and I can see all the options Jim describes in camera profile My camera is Nikon, so those are the options I should get. But on my new laptop, all I get in camera profiles is ACR 4.4. I originally downloaded the most recent camera raw update to the laptop, but when that didn't work, I copied the 8BI file from the desktop to the laptop with a memory stick, and I still get the same results - no options. Camera raw on the laptop does recognize my camera, and lists it at the bottom of the preview screen, but it does not populate the options in camera profile.
I distrust the answer you got from FAQs, because my camera did not exist at the time ACR 4.4 was released, and it really does not explain why I can't get the same camera profile selections on the laptop as I do the desktop. Both are Dell, Vista 32. Both are PE 6. Both are the same camera, and now, the same 8BI file. And both show ACR 4.4, The 4.4 doesn't bother me, but I want the camera options on my laptop.

Similar Messages

We have 3 computers that have been authorized to home share but we cannot see eachothers library since updated to the latest version. Is there something I am misssing?

We have 3 computers that have the latest itunes version and now we cannot see eachothers library anymore. All of them are authorized. I unauthorized, reauthorized, in both the store and itunes to no avail. Is this just the way the new version is designed or is there something we are missing? I recently wiped the computer clean of all Itunes songs/files after several years of my son managing his itouch on it, so we are all clean of previous files. What is the deal?

It most definitely is the browser that is causing most of the problems. I have used Firefox so long, I can't even remember. Maybe since its beginning. But today is a sad day. I gave up on it. I can't accomplish anything and end up spending hours troubleshooting. I see I am not alone. I am so sick of it "not responding." It's simply not worth it to spend so much time trying to make the thing work, so I can actually do something. Installed, removed, reinstalled numerous times, and I can't fix your software on my Win 7 Pro machine. No problems with IE or Chrome. So. as much as I hate Google Update, Chrome has won the test. Sad, sad day for me to lose Firefox, but it just does not work on the Win 7 machine. I don't have the same issues with the XP machine and have exactly all the same add-ons. Keep it up developers and you will have no Win 7 users at all.

Cannot see Cookies with new update of firefox. I recently updated firefox, but when I look on the PRIVACY window, where websites store cookies, I am no longer a

Cannot see Cookies with new update of firefox. 
I recently updated firefox, but when I look on the PRIVACY window, where 
websites store cookies, I am no longer able to see any cookies that 
are being stored, and I am not able to delete the cookies as soon as I leave 
their site, as I had been doing for a long time prior to updating. 
So I am wondering where the heck are the cookies being stored now, with the 
new update? I like to be able to delete their cookies immediately, and 
I also wonder why firefox does not make it much easier for us to see 
all the cookies and delete them with one click, instead of having to 
use the <<TOOLS<<OPTIONS<<PRIVACY way of looking at and deleting cookies. 
The option to delete the cookies when firefox closes is not as efficient 
and I will get tracked until I close firefox, and I prefer to not be tracked 
so I like to just delete their cookies as soon as I am no longer using their 
site anymore.

(my question was not fully showing so I added this here)
way of looking at and deleting cookies.
The option to delete the cookies when firefox closes is not as efficient
and I will get tracked until I close firefox, and I prefer to not be tracked
so I like to just delete their cookies as soon as I am no longer using their
site anymore. So I need to know how to make the cookies visible again, so I can immediately delete them. thank you

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

Hey there MattSK123,
Thank you for your question. It sounds like you are unable to see either of your devices in the sidebar of iTunes after a recent update. A number of issues could cause this type of behaviour, and would recommend starting with the troubleshooting from the article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If the issue is not resolved, I would next re install iTunes from either of the following articles depending on the version of Windows you have:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Or
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thank you for using Apple Support Communities.
Take care,
Sterling

I have bought a Macbook Pro Retina, and the iPhoto which comes with it, has a different iPhoto Book menu. I cannot see how to put text at the bottom of the pages of photographs, instead of the default place in the middle. Is there a way to do this?

I have bought a Macbook Pro Retina, and the iPhoto which comes with it, has a different iPhoto Book menu. I cannot see how to put text at the bottom of the pages of photographs, instead of the default place in the middle. Is there a way to do this?

There are different templates for iPhoto books and they differ from version of iPhoto to iPhoto, so explore the other options.

I am trying to attach multiple photos to an email from my ipad 2. I can see how to do it from the camera and camera roll option,but not from the photos program. What am I missing? Thanx so much!

I am trying to attach multiple photos to an email using ipad 2. I can see how to do it using the camera and camera roll ap...
But not using the photos ap..which is where the photos are. Any help would be appreciated.!

In an album in Photos touch the Edit button and then touch the desired photos (up to 5). A blue check appears in each selected photo. Next touch the Share button at the upper left and select Mail. This starts a email with the photos attached.

TS1702 My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

What model iPod do you have? If yo have a 2G iPod. many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.

Nikon P7700 not listed in the camera profile directory

Why is the Nikon P7700 not listed in the camera profile dirctory of Lightroom 4.2, and not selectable in calibration menu?

Just to clarify again, what has already been stated. There IS a calibration profile for your camera. The name of that profile is Adobe Standard. The only profiles that display are profiles for the specific model that took the picture. Every camera that Adobe supports, even the digital SLR cameras, has an Adobe Standard profile. That is the "standard" profile that Adobe created for the camera. A camera will either be supported and have at least a profile with that name, or it will not be supported at all.
Asking when the other profiles will be provided is futile. I can only guess, but the answer will probably be, never. If you want to create additional profiles you can download the DNG Profile Creator and create your own. But I suspect you are getting all that you're going to get from Adobe. I have a Fuji camera, an older one, and I have three Adobe Standard profiles for it. Two of them are designated with numbers corresponding to older versions of ACR/Lightroom.

How can i add the Sigma 10mm 2.8 Fisheye lens profile from the camera profile in windows to lightroom 5?

It only seems to give me a 15mm fisheye option for Sigma and not the 10mm even though it is a profile in the camera profiles folder.
Can anyone help with importing this profile into Lightroom?

nickpearse wrote:
Just so it is black and white for my sake. I am shooting with a Nikon D7100 using a Sigma Fisheye 10mm 2.8 and using the Lens Profile of the Sigma 15mm 2.8mm on Lightroom.
Then the correct profile to use is the Sigma 10mm F2.8 if you want proper Vignetting correction and matching Distortion correction, but you'll need to shoot camera raw images (i.e. no JPEG lens profile). This is also why you are only seeing partial correction. As I said, "With a crop factor camera only the central crop area of the full-frame Sigma 15mm lens profile will be applied."
That said there is absolutely nothing wrong with using the Sigma 15mm lens profile with your crop factor Nikon D7100 if you are happy with the partial correction results, but you can also do this using the correct Sigma 10mm lens profile (set less than 100). There is a fisheye correction plugin called Fisheye-Hemi that works very similar in that it only applies partial correction. You're getting about the same results as Fisheye-Hemi for free using partial correction with the LR lens profile tool. That should make you happy! I suggest experimenting with both the 15mm and 10mm lens profiles and start shooting camera raw image files. Your're not realizing the camera's full capability shooting JPEGs!
In the DSC_7098 images posted none of them look very sharp (slow shutter speed?). Other than geometric correction I can't judge the posted images for "sharpness" in the corrected areas, which is the major concern. The biggest issue with rectilinear correction of fisheye images is loss of detail in areas with the most correction (edges and corners). If that were not the case people would use fisheye lenses for ALL wide-angle images and simply correct them inside LR. Sadly that's not the case and using LR's Lens Profile Distortion and other transform tools to correct fisheye images considerably softens the corrected areas (sides and corners).
Fisheye geometric distortion with some subjects is almost undetectable. So how much correction you need will vary by subject type and what the end use for the image. Any fisheye image that has correction applied will lose sharpness in the corrected areas, which may be fine for most purposes other than large prints.So it's best not to strive for 100% rectilinear correction–Just the correction needed to make the image look better.
Canon 8-15mm F4L FE on 5D MKII Full-Frame @ 15mm (No correction)
Looks good to me with no correction!
For more flexibility and better results PS's Wide Angle Adaptive filter and content aware fill tools will retain more image detail in the corrected areas. Here's the same lens and camera with an image processed in PS:
15mm Full-Frame Fisheye
LR Distortion = 50 (partial) PS Adaptive Wide Angle Filter + Content Aware Fill
The corner image detail is about the same in both of the above images at 1:1 view. Partial LR Distortion correction is good!
So what happens if I apply 100 Distortion correction to the image inside LR?
1:1 Compare View (lower-left) with LR Distortion = 100
100% LR Distortion correction of fisheye images is NOT good IMHO!

Where are the camera profiles? Not showing up in LR 4

The camera profiles are not visible in the camera calibration menu in the develop module of Lightroom 4. I installed them using the installer that came with the profiles. What folder are they supposed to be in so I can use them (Windows 7 x64)? Where is the documentation? Why isn't Adobe answering the phone?

Thanks for your quick reply! I have the 4.1 update installed. I have a Sony SLT A57. It is not inC\Program Files\Adobe\Adobe Photoshop Lightroom 4.1\Resources\CameraProfiles
The actual path there looks like:
C\Program Files\Adobe\Adobe Photoshop Lightroom 4.1\Resources\CameraProfiles\lens profiles\camera\adobe standard (empty)
However, I installed rc 4.2 after I wrote to you, and the path to the (Sony) camera profiles is now:C\Program Files\Adobe\Adobe Photoshop Lightroom 4.2 RC\Resources\CameraProfiles\Adobe Standard. There is another folder named Camera, under Camera Profiles, in which are Canon, Nikon, and other camera folders - with several different profile choices within each folder. In this other "Camera" folder there are some Sony cameras with different profile choices for each camera in the folder, ie portrait, landscape, vivid, standard. Can I try one of those, or does the program automatically go to my camera model? Are they planning to add these other profile choices for my Sony SLT a57?
The one profile listed in the development menu is "embedded". What is that?
Thanks, Joanne

How can I see ACR is busy (updating the screen)

Hi,
I use an older PC with Win XP, PS CS6 and ACR 7.3
When I've made several modifications the pc is getting slower and slower.
I've read when ACR is working, there appears an icon like this:
But that is only in the beginnning when ACR is starting....so far I know.
Suggestion for next version of ACR:
Is it possible to change the mouse indicator in something like :
Why this .....than there is an visual working-indicator .....if you make little changes you can positioning the mouse on that aera .... and waiting....when the icon changes back to normal.... the screen-update is finished.......so you can better toggle between "before" and "after"

First, thanks for the answer.
Jeff Schewe wrote:
I think you are misunderstanding what the icon warning is telling you...ACR shows that yellow triangle when first opening a raw image in ACR...............
Ok I understand, the ICON was not clear to me.
The fact remains that ACR is busy updating.
..............Thereafter, depending on your cpu speed, and changes should update very quickly so there is no need for a any additional warnings.
This second reason is not clear to me.
In my case it takes 5-8 seconds before the screen is updated.
But I can NOT see exactly when ACR is ready (especially with small changes), I have to guess when it's done ............
I can see something in the histogram, but not always, and it is also not synchronized (with ACR's updating) .......
And not everyone has the latest / fastest model PC ......
And another mouse icon programming is peanuts (only 1 system call, isn't it) .....
And there are more programms that have a hourglass.....
So I do not agree with this argument.
But.............Maybe there are more people with a similar problem....or have an other suggestion for it?
Other suggestion: Now ACR is updating the histogram first and after that the screen is updated.
How about to exchange those two ? ...so that the histogram is (always) the final action that ACR does when it is updating the midifications that are made.

Cannot see offline folios after updating to iOS8

Hi guys, since i’ve updated my ipad to iOS version 8, i’m experiencing some issues with the adobe content viewer app.
The problem is that i cannot open the editions created before the update. The status bar keeps working but nothing happens. Differently, if i reupdate the folio by updating manually its articles, i get a duplicate edition on the content viewer app that works perfectly.
This only relates to offline folios uploaded trough the ipad’s cable.
Although it seems the problem is solved for me by redoing the update of every single articles, there’s a friend of mine (which seems had already posted the same question here) who cannot open his offline folios even when he do the articles update again.
Another strange issue, when i try opening the content viewer's default folio, i get a blank document and the app suddenly crashes.
i’m using Indesign cc 2014 with the latest update and a 2013 ipad mini retina.
*UPDATE*
Announcement: Latest Digital Publishing Suite Update Includes iOS 8 Support and More « Adobe Digital Publishing
As i've seen on the adobe blog, on iOS8 you cannot view apps (and then folios) made under version v31. This would have answered my question, but i've tried making another folio in v32 and i get the same error.
I suppose it's something related to the iOS update, since i've tried on the Android version on my galaxy note and everything works just fine.

Hi
I've just experienced exactly the same. I made a v32 folio but once I go back to the library and try to re open it....nothing happen. I mean I see the status bar working but it doesn't open.
I'll wait for the fix.

Cannot see Transaction replication with updatable subscription in new publication wizard-sqlserver 2005 standard edition

Folks,
I am planning to implement transactional replication with updatable subscription between two sql2005 Instance .I am surprised that i cold see this type of replication in the new publication wizard in the source server instead i see peer-to-peer replication.
Could you please help me in understanding how to setup transactional replication with updatable subscription in sqlserver 2005 standard edition.
Thanks.

Hi soories,
In addition to Ashwin’s post, peer-to-peer replication is available only in SQL Server 2005 Enterprise Edition. Please
execute ‘Select @@version’ in SQL Server to verify the version and edition of your SQL Server instance.
Also if you cannot see the option “Transaction replication with updatable subscription” in New Publication Wizard, you can use T-SQL to achieve this requirement.
How to: Create an Updatable Subscription to a Transactional Publication (Replication Transact-SQL Programming)
https://technet.microsoft.com/en-us/library/ms146922(v=sql.90).aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Cannot see my external hard drive on the desktop

Hi,
I am at the tail end of a large documentary project on FCP. Suddenly, this evening my external hard drive (Maxtor One Touch III, Turbo Edition, 1.5TB) becomes sluggish. I shut down (all properly) and restart and the external hard drive is no longer on the desktop (does not mount and cannot be seen anywhere).
I change ports (from one FW400 to another), try connecting to a different Mac (was running on an iMac, try connecting onto a G5) and still cannot see the hard drive. I try connecting using USB2 and still cannot see it on the desktop. I run disk utility and the hard drive shows up in menu on the left, I am able to run "verify disk" as well as "repair disk" - hard drive is fine, no errors no problems. However, I still am not able to access the drive - just does not show up on the desktop or anywhere else where I can get into it. I run the install disk that came with the hard drive (Maxtor) and a backup utility can detect the drive and shows that 1.37 TB of data is safe (so no data loss) but I can still not detect the Hard drive. I also noticed that the light on the hard drive is active indicating that the drive is being accessed.
Problem is simply that both my Macs do not show the drive regardless of how I connect them to the drive (FW400, FW800, USB2 and every port has been tried).
Need help here...please....
I realize this might be more suited for a general OSX or Hard drive issue, but since I have always got great answers from FCP users that I am posting this question here.

Hello all,
Thank you for all your comments and suggestions. I downloaded Disk Warrior 4 from Alsoft - paid $108, followed the instructions to the letter (after reading and rereading sevral times) and ran the utility...it detected the Maxtor HD, pointed out several errors, repaired the errors, and then gave me the option to preview the new and compare to the old HD...this is where things went wrong. There was no HD to be seen - new or old...same problem. HD is not visible on my Finder, on the Disk Warrior Preview or on the desktop. I went ahead and rebuilt the HD...all errors fixed, Disk Warrior states that all is fine and dandy and that my hard drive should be perfect and I can access it...BUT its still not there, I cannot see it on the desktop nor anywhere else.
It shows up in Disk Utility as a page icon - but I cannot access it.
So, unfortunately for me...my problem still remains and I am now out a hundred bucks!
Please, anybody out there - who can give me some direction - I would greatly appreciate it.
BTW, the data is still all there and the light on the front of the drive keeps flashing indicating something is going on...but drive is not mounted, invisible.
I read on the Maxtor packaging something about a built in Maxtor DriveLock - a password protected security measure against theft and loss...could I have inadvertently activated that and that is causing the problem...please advise.

I have deleted photos from my i phone 4 but when i sync the phone they reappear in my How do i delete these permenantly. I cannot see them anywhere backed up to the computer.

Hello
I have deleted photos from my i phone 4 but when i sync the phone they reappear on my camear roll. How do i delete them permenantly? I cannot see them backed up onthe computer anywhere.

iPhone's Photos app > Photo Stream > select photos and tap the trashcan.

Cannot see ACR 5.3 update in the Camera Profiles on CS4

Similar Messages

Maybe you are looking for