Cannot start J2EE server on Windows 2000 server

Hi..
I installed J2EE 1.3(beta) along with J2SE1.3 that comes with the Java Jump start CDs.
The installation process went fine...I configured the environment variables but when I try to start the J2EE server from command prompt I get the following error.
E:\>j2ee -verbose
Exception in thread "main" java.lang.NoClassDefFoundError: javax/naming/Context at com.sun.enterprise.server.J2EEServer.<clinit>(J2EEServer.java:59)
The same error is encountered with other switches(stop, version etc.) of j2ee.
There is no conflict of port numbers. Can anyone please guide me properly what I have done wrong in the installation process?
Thanks

Well...I removed the CLASSPATH variable all together and reinstalled J2SE 1.3 again(refreshed all the environment variables) and then started j2ee server....and it worked this time...
Thanks alot...

Similar Messages

  • SOS I am in trouble Installing Forms Server on Windows 2000 Server

    I need advice on installation of Forms Server on Windows 2000 Server. Is Forms Server only meant for Windows NT. Since Windows 2000 Server is an extention of Windows NT there could be a way out which I am not aware of. On installation of Forms Server I get message that Forms Server components can work only on Windows NT 4.0 Service pack 5 or higher. Please Help
    Thankyou

    Hi,
    Did not try W2000 Adv Server.
    However...Forms Server 6i runs on W2000 Pro in combination with patch1
    HTH
    Martin

  • Can i change my Exchange 2003 organization to NATIVE MODE if my Front-End Exchange server is Windows 2000 Server

    I am planing to upgrade from exchange server 2003 to exchange server 2010. I understand 2010 can co-exisist with 2003, but my 2003 organization must be in NATIVE MODE, not a problem because i don't have anymore MS Server 2000 domain controllers, they
    were decommisioned a few moths after we moved to AD. However my Front-End exchange server that sits on my DMZ is running Exchange server 2003 on Windows 2000 Server.
    Can i change my Exchange 2003 organization to NATIVE MODE if my Front-End Exchange server is on the Windows 2000 Server OS? If not, will i have to setup a new Front-End Exchange server on at least Windows Server 2003 to replace the 2000 server setup?
    It's been a very long time since these servers were configured so i may need help setting up a new Front-End server if it will be required.
    thanks
    B
    Bobby

    My apologies for the very, very late reply, is have made the change to native mode for my
    Exchange environment, email is working fine, no problems. Thanks Cheng.<o:p></o:p>
    I ran the Exchange 2010 Pre-Deployment Analyzer tool yesterday, and it showed that the
    Active Directoy Forest is not Windows Server 2003 native. The domain forest
    functional level showed the level to be "Windows Server 2003", is
    just wanted to verify this.<o:p></o:p>
    Our corporate AD has one Root domain, (I’ll call it, Corp.com) and one child
    domain, (I’ll call it, na.corp.com). na.corp.com is functioning at Server 2003,
    the Forest of Corp.com, as the analyzer found, shows a functional level of
    Windows 2000. All Windows 2000 PDC have been off the network for almost 9
    years, and were properly demoted and removed. I guess the one place is didn't
    look was at the Forest level.<o:p></o:p>
    I opened the AD Sites and Service mmc plugin on the corp.com server and did find the old
    Windows 2000 PDC listed with the Servers. I drilled down into the containers
    for the old server, deleted everything, and was able to delete the W2K PDC. I
    still cannot raise the Forest level however.<o:p></o:p>
    I also noticed that domain replication has errors, (8614, 1908, 1256, and 8606), so i
    have a bit of a mess, and i am not sure how to fix it. I will post this on the
    Exchange 2010 upgrade, and AD forums for assistance, but i wonder if i need
    paid assistance.<o:p></o:p>
    Thanks again Cheng
    B<o:p></o:p>
    Bobby

  • Cannot start OracleDBConsole service on Windows 2003 Server

    Hello:
    All of a sudden, the above service does not start on a Windows 2003 server. The event log has this message:
    Agent process exited abnormally during initialization.
    Please help!
    Venkat

    One more piece of information. The service starts fine when started in the services control panel

  • How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?

    I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
    Thanks

    Hi,
    This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
    You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
    https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
    http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
    Benoit Lecours | Blog: System Center Dudes

  • Oracle8i on Windows 2000 Server - Oracle Instance don't auto start

    I've installed the Oracle 8.1.7 on a Dell Pentium III server running Windows 2000 Server operational system. During the installation the Oracle Instance was started up, but after I reboot the computer, the Oracle Listener service and the Oracle service was started in automatic mode but the Oracle Instance do not started though.
    My Oracle DBA teacher ask me to run Oradim and edit the Oracle configuration startup parameters. I did, but it didn't solve the problem. The values on Windows registry of the ORA_<SID>_AUTOSTART key is "true". The Dba Studio also gets information form the Oracle server and all the fields seems to be correct with auto-start option, but it didn't work out.
    Can someone point me to any text I can read about installation troubles on Windows 2000 Server ?
    Thanks in advance.
    Jayme.

    Hi
    I don't have an 8i db to test on but I think it works the same as on 9i.
    Check the following parameters in your registry in the key HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0:
    ORA_<YOUR_SID>_AUTOSTART=TRUE
    ORA_<YOUR_SID>_PFILE=<full path and file name of your init file>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Calendar Server and Windows 2000

    Hallo,
    what have I got to do to run the Sun ONE calendar together with the ldap Server of Windows 2000 Server (Active Directory)?
    When installing it says, I will have to update the directory manualy, but I do not know how to do this...
    thanks a lot
    salamander

    I have 2005Q4 calendar, communication express, 2005Q1 messaging server, and outlook connector
    I don't think that this is a supported configuration. Outlook Connector expects all the versions to match. It's not likely to work unless it finds that.

  • Cannot smb to Windows 2000 Server share (works in 10.4)

    After installing a fresh copy of Leopard on my macbook pro I cannot connect to a previously working share on a Windows 2000 Server using smb. I am using Go > Connect to Server to connect.
    I am prompted for a username and password but the connection fails with Error code -43.
    Here is my Console info.
    11/26/07 12:13:08 PM /System/Library/CoreServices/NetAuthAgent.app/Contents/MacOS/NetAuthAgent[459] Enumerate shares failed!: syserr = No such file or directory
    Any help is appreciated!

    I found a work around for this in another thread. Thank you gnaegi.
    Below is what was posted...
    Open Terminal.app from /Applications/Utilities and then enther the following:
    mkdir myshare #(do this only the first time)
    mount -t smbfs //[email protected]/sharename myshare
    When you work this way you should unmount the share before you log out, shutdown or put the computer to sleep. To do this, open the Termina.app and enter:
    umount myshare
    The mounted share is now in your home.

  • Oracle 8i 8.1.7 on Windows 2000 Server

    After I install Oracle 8.1.7 on Windows 2000 Professional, Everything is Good, database and Enterprise Manager Server startup normal.
    But when I install Oracle 8.1.7 on Windows 2000 Server, the Oracle Service startup normal , but the database instance can not startup automatical, I must startup the database instance manual using svrmgrl program and the Enterprise Manager Server can not startup ?

    check it:
    start
    -->program
    -->$oracle_home$
    -->Database Administration
    -->Oracle Administration Assistant for Windows NT
    oracle instance 'startup/shutdown options'

  • Oracle 8.1.7 Server Installation on a P4 Windows 2000 Server

    I am trying to Install Enterprise Oracle 8.1.7 on a P4 Windows 2000 Server Machine. I had a solution regarding the P4 bug, which asked the latest Service Pack for Win 2000 to be installed, the Oracle CD dump copied to hard disk and symcjit.dll to be renamed. This enabled me to start the Installation Process. I chose the Administrator option during installation.
    However I noted that only Oracle Client is Loaded and NOT Server. I do not get any options to install Server. I only have 1 CD for Enterprise Oracle 8.1.7 which should have both Server Programs and Client Programs to Install I believe!
    Any help would be appreciated!!!
    Thanks

    Dear Nandakumar Ananthanarayan,
    I read your posting and I seem to have a similar problem.
    I am trying to install Oracle8i ver 8.1.7 on WINDOWS 2000
    SERVER with service pack 3 on an Intel Xeon Processor at 2.4GHz.
    Raid 5 is used on 3x36GB Hard Drives.
    When the Oracle8i CD is inserted the initial screen comes up.
    From this I choose "Install/Deinstall Products".
    After this nothing at all happens.
    The initial screen closes and the system is as it was.
    I would be obliged if you could help me out.
    Yours Sincerely,
    Chris.

  • Problem installing Oracle 8i(8.1.7) standard edition on windows 2000 server

    I am trying to install Oracle 8i (8.1.7) standard edition on windows 2000 server but the setup program doesn't run.
    It starts up, allocates some ram then closes before a window even pops up.
    I also have MSSQL server installed on this computer, does that conflict?
    Has anyone encountered this problem before? If so, please give a solution if you have one, thanks,
    OPS

    Yes. There is a bug with Pent4, Win2000 & Oracle8i.
    Here is the workaround:
    This is a known bug with Oracle java-based applications and Pentium 4 Use this work-around:
    1) Copy the install directory from the CD to the hard disk.
    2) Edit oraparam.ini and modify it as follows:
    * Edit the "SOURCE=" line to to show the full path to the CD ; SOURCE={CD DRIVE LETTER}:\stage\products.jar)
    * Edit the "JRE_LOCATION" line to show the full path to the CD ;
    JRE_LOCATION={CD DRIVE
    LETTER}:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
    * Edit the "OUI_LOCATION" line to show the full path to the CD ;
    OUI_LOCATION={CD DRIVE
    LETTER}:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
    * Edit the "JRE_MEMORY_OPTIONS" line to include "-nojit" as the first argument ;
    JRE_MEMORY_OPTIONS=-nojit
    -ms16m -mx32m
    3) Start setup.exe from your hard drive
    Choose a Custom install and choose not to create a database during the install.
    This way, the Database
    Configuration Assistant will not be launched during installation. DONT SELECT
    NET8 products for installation.
    You need to put the same java parameters for the DB configurator and the Net8
    Configurator
    to run.
    -nojit -ms16m -mx32m before -classpath on:
    * assistants\dbca\DBAssist.cl
    * network\tools\netca.cl
    ** Run the DataBaseConfigurationAssistant and NetworkConfigurationAssistant after installation.
    Hope it helps!
    Amrit

  • Oracle 8 installation in Windows 2000 Server

    I can't install oracle Enterprise Manager (Oracle 8 product) in a Windows 2000 Server system. The installation program show me this error message:
    "Unable to delete the NT Service for the
    SQL * NT V2 listener"
    Can any body have the solution?

    Supposedly you need to find these 3 files.
    SQLNET,TNSNAMES, LISTENER using your windows find from start. change the names of the dev ones to .bak or something else.
    copy the files from your 8i/network/admin into those 2 other places (forget the/samples directories). restart the database and it should connect (Developer stuff to database) A friend of mine did this on W2K and it wokred fine. I have tried it on win98 with 8i personal edition for win 98 and DEV 6 and it failed. So if anyone knows anything I am missing let me know. SQL+ works fine so I knw the DB is fine.
    Thanks,
    Michael

  • 2 nodes RAC with Oracle 10g on Windows 2000 server

    Hi at all. I want to manage a cluster having 2 nodes on windows 2000 server each of them with Oracle 10g. I have VMWare 5.0. Someone can suggest me a detailed tutorial how to start and built it? Thank you very much for your answers.
    Saverio Sergio Mola

    the cookbooks here:
    http://www.oracle.com/technology/tech/linux/vmware/cookbook/index.html
    will explain how to install.. however the VMware Workstation product doesn't offer in a supportedway the sharing of two nodes of disks.. there are hacks out there, but they are not very stable. We therefor chose to install two instances on one node to showcase RAC, rather than make it complicated and unstable to use and showcase.
    there are also ready made VM's from above page, so u can quickly evaluate it for both Red HAt and SuSE.. when vmware can support such sharing in an easy supported way we might re-evaluate.. until then my personal suggestion is to stick to simple case.. 2 instances on one node.. its easier to copy, snapshot.. etc.
    Enjoy..
    Saar.

  • Install Oracle 10g on Windows 2000 server

    hello
    I have installed Oracle 10.1.0.2 on my server ( Windows 2000 server). The procedure of installation goes suitably but during the creation of the base it posts me:
    instance Created
    Dim-00019: Error of creation of service
    O/S-error OS1387) Impossible to add or remove a member of the local group because this member does not exist
    then, I look that the service OracleDBConsole of Enterprise Manager is not created
    knowing only SqlPlus goes well.
    after the installation, I want to add the console Enterprise Manager while using EMCA then it display this error:
    Failure of the configuration Enterprise Manager because: Job_queue_processes must be equal to or higher than 1
    help Me PLEASE

    First problem: Check the user , which does the installation,
    it must be a Local Administrator in order to install Oracle products on a
    Windows NT/2000 Server (machine not part of a domain) or it must be a Domain Administrator to install Oracle products on a Domain Controller (PDC or BDC) (machine part of a domain).
    Another known issue for this problem is a non-english Windows version,in this case the software should reloaded from OTN, which has a fix.
    Second problem: You cannot run emca, BEFORE you have a running database, DBConsole depends on it.
    Werner

  • Error -36 connecting to Windows 2000 Server

    I'm trying to connect to a windows 2000 server that appears in my Network browser but I can't authenticate using the Network browser or via smb://.
    I have been able to connect in the past no problem and I can login to the server on another machine using my user and password.
    I get two errors:
    If I go via Network browser I can click and get a username and password dialog box. When I enter my details and hit return I get - 'The alias (servername) could not be opened because the original could not be found'
    If I go via Connect to Server i get a "can't connect to server blah blah (-36 error)" and I can cancel or try again.
    I've searched high and low for a solution but can't find anything like this.
    I suspect I need to trash some preference or other, like you could do in OS9, but I have no idea where to start with OS X.
    Can anyone help?
    Al
    G5   Mac OS X (10.3.9)  

    See the following article
    http://docs.info.apple.com/article.html?artnum=301580
    Basically the steps are as follows:
    Follow the steps below to configure your computer to use plain text passwords to make SMB/CIFS connections when the specified Samba or Windows (SMB/CIFS) server does not support encrypted passwords. (You must be an administrator to do these steps.)
    Make sure that you are not currently connected to any Samba or Windows (SMB/CIFS) servers and that you do not have any Samba or Windows-related error messages open.
    Open the Terminal (/Applications/Utilities/).
    At the prompt, type: sudo pico /etc/nsmb.conf
    Press Return.
    Enter your password when prompted, then press Return again.
    You should see an empty file and a "New File" notice at the bottom of the pico window. If you do not see the "New File" notice, this file already exists.
    Enter the following into the file so that it appears as follows:
    [default]
    minauth=none
    Save the file (press Control-O), press Return, then exit pico (Control-X).
    Type: sudo chmod a+r /etc/nsmb.conf
    Press Return.
    Restart your computer.

Maybe you are looking for