Cannot Start Oracle BAM ADC

Hi,
I would appreciate if anyone can help me in solving this issue.
I`m getting an error while starting the ADC Service.
Service cannot be started. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.Exception: DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(Byte[] cipherTextBytes, Byte[] entropyBytes, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText, String entropy, String& description)
at Oracle.BAM.Common.Security.DataProtector.DPAPI.Decrypt(String cipherText)
at
It was working ,suddenly it stopped working and giving this error. Dont know what`s wrong.Need help.
Thanks

Hi Nitin,
Was the password of the account that the ADC service runs as changed?
If so, see "Working with Post-Install Password Changes and Password Expiration Policies" in the BAM Install Guide.
Regards, Stephen

Similar Messages

Cannot access Oracle BAM Start Page

Although Oracle BAM installation completed without any error and I can start BAM related services without any issue, I cannot access Oracle BAM Start Page because of the following error.
You are unable to connect to the Oracle BAM services. Contact your system administrator if the error persists. [ErrorSource="ActiveDataCache", ErrorID="ADCServerConnectionError"] The requested name is valid, but no data of the requested type was found [ErrorSource="mscorlib"] Debugging information: Oracle.BAM.ActiveDataCache.ServerUnavailableException: You are unable to connect to the Oracle BAM services. Contact your system administrator if the error persists. ---> System.Net.Sockets.SocketException: The requested name is valid, but no data of the requested type was found Server stack trace: at System.Net.Dns.GetHostByName(String hostName) at System.Net.Dns.Resolve(String hostName) at System.Runtime.Remoting.Channels.RemoteConnection..ctor(SocketCache socketCache, String machineAndPort) at System.Runtime.Remoting.Channels.SocketCache.GetSocket(String machineAndPort) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.SendRequestWithRetry(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream) at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Oracle.BAM.ActiveDataCache.Common.Core.IDataStore.Exists(String strDatasetID) at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.Exists(String strDatasetID) --- End of inner exception stack trace --- at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.Exists(String strDatasetID) at Oracle.BAM.ActiveDataCache.SystemType.LoadSchema(Boolean bCache) at Oracle.BAM.ActiveDataCache.Context.LoadUser() at Oracle.BAM.ActiveDataCache.Context..ctor(String strDomain) at Oracle.BAM.Web.WebPage.CreateContext(String strUserName) at Oracle.BAM.Common.Threading.SynchedHash.GetObject(String strKey, Object oLock) at Oracle.BAM.Common.Threading.SynchedHash.GetObject(String strKey) at Oracle.BAM.Web.WebPage.GetContext() at Oracle.BAM.StartPage.StartUp.Initialize()
Do you have any idea ?
Although I checked ActiveDataCache.log, it is empty ( looks no problem ).
My environment as below.
OS : Windows 2003 R2 Enterprise Edition Service Pack 1
Oracle version : 10.1.0.2
Oracle BAM version : 10.1.2
Thanks in advance

Hi,
I've installed BAM 10.1.2 on Windows 2000 Professional. I have IIS 5.0 and Microsoft 1.1 .Net Framework installed on my PC. I'm able to use the Design Studio and Admin from Oracle BAM Enterprise Link. The installation completed successfully but I'm still not able to open the BAM start page.
I see the error:
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
Line 263: 
Line 264: 
Line 265: <authentication mode="Windows">
Line 266:
Line 267: </authentication>
Source File: C:\OracleBAM\BAM\web.config Line: 265
I've checked that OracleBAM appears as a virtual directory in IIS (from Personal Web Server) and there were no errors in installation. The Access Permissions is set to 'Read' and Application Permissions to 'Scripts'
Should the authentication mode take any other parameters ?
Let me know what can be done to resolve this issue.
Thanks in advance !

Error in Starting Oracle BAM Active Data Cache

I am not able to start "Oracle BAM Active Data Cache" on my machine.
The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
When I see the event log file of my Computer I could see the details as below:
Event Type: Error
Event Source: Oracle BAM Active Data Cache
Event Category: None
Event ID: 0
Date: 2/7/2007
Time: 3:51:25 PM
User: N/A
Computer: CHNANDA-WXP
Description:
ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Could anyone pls help me?
Thanks and Regards,
Chinmaya Nanda

hi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default is oraclebam or orcl ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter

BAM error - during start oracle BAM

Hi,
I am getting the below mentioned error while starting Oracle BAM, i have installed BAM 10g release (10.3), there were no problems in installation. Any help will be highly appreciated.
Rgds,
Jay
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
Starting "Oracle BAM Active Data Cache"...
System error 1069 has occurred.
The service did not start due to a logon failure.
Starting "Oracle BAM Event Engine"...
System error 1069 has occurred.
The service did not start due to a logon failure.
Starting "Oracle BAM Plan Monitor"...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
Starting "Oracle BAM Report Cache"...
System error 1069 has occurred.
The service did not start due to a logon failure.
Press any key to continue . . .

Hi
Any particular reason , you haven't moved to BAM 11g ( 11.1.1.3.0).
This is the latest release for the product.
Regards
Payal

Error starting Oracle BAM active data cache service

Hi
after installing BAM every thing working fine ,but if restart my system Oracle BAM active data cache service throwing following error
"The Oracle BAM Active Data Cache service on Local computer started and then stopped.Some services stop automatically if they have no work to do,for example the performance logs and alerts service"
Database is running fine
Following is the ADC log file error
2007-12-07 17:19:29,640 [2928] ERROR - ActiveDataCache The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.DllNotFoundException: Unable to load DLL (OraOps10.dll).
at Oracle.DataAccess.Client.OpsTrace.GetRegTraceInfo(UInt32& TrcLevel, UInt32& StmtCacheSize)
at Oracle.DataAccess.Client.OraTrace.GetRegistryTraceInfo()
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleDataFactory.GetConnection()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
2007-12-07 17:24:45,250 [1524] ERROR - ActiveDataCache Unable to load DLL (OraOps10.dll).
2007-12-07 17:24:45,265 [1524] WARN - ActiveDataCache Exception occurred in method Startup
Please help me in resolving this issue .Am getting this issue every time
Thanks
BS

Make sure the path to the ODAC used by BAM (C:\OracleBAM\ClientForBAM\bin) is the first item in the system PATH
environment variable. Restart your computer after fixing this.
If that doesn't fix it, please check the Troubleshooting section in the BAM Install Guide.
Regards, Stephen

SAP cannot start Oracle after Upgrading to 10g

I have upgraded Oracle to 10g (10.2). After upgrading I run startsap but sapstart can start Oracle database but R3trans cannot verify that the database is started.
the following log are in startdb.log. Please give me an idea what to do to solve this problem.
S27adm 22> more startdb.log
Mon Jun 2 13:00:22 GMT: 2008
LOGFILE FOR STARTING ORACLE
Mon Jun 2 13:00:22 GMT: 2008
checking required environment variables
ORACLE_HOME is >/oracle/S27/102_64<
ORACLE_SID   is >S27<
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
checking V2 connect
TNS Ping Utility for HPUX: Version 10.2.0.2.0 - Production on 02-JUN-2008 13:00:22
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/S27/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = er3asu81)(PORT = 1553)) (CONNECT_DATA = (SERVER = DEDICATED) (
SERVICE_NAME = S27.world)))
OK (0 msec)
tnsping: V2 connect to S27
Mon Jun 2 13:00:22 GMT: 2008
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Mon Jun 2 13:00:22 GMT: 2008
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Jun 2 13:00:22 GMT: 2008
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Jun 2 13:00:23 2008
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 2533359616 bytes
Fixed Size                  2199816 bytes
Variable Size            2025713400 bytes
Database Buffers          503316480 bytes
Redo Buffers                2129920 bytes
Database mounted.
SP2-0158: unknown SET option "charwidth"
no rows selected
Not a terminal
Not a terminal
Database altered.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Jun 2 13:00:46 GMT: 2008
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
Mon Jun 2 13:00:46 GMT: 2008
/usr/sap/S27/SYS/exe/run/startdb: Terminating with error code 2

Verify .dbenv* files in your <sid>adm home directory and update them as recommended in 10g upgrade documentation in the SAP Marketplace.
If still not resolved, do R3trans -d from <sid>adm home directory and post the recent trans.log file to review further.
Good Luck
Nag Anthati

Win2k cannot start oracle services

Hi,
Usually, our oracle servers can start up autometically
when the machine start up.
Just now, oracle services cannot start. I try use
start->control panel->administrator tool-> services to
start oracle service, it gets errors as following:
could not start the OracleOraHome90TNSListener service on
local computer.
Error 5: Access is denied.
Then I try to use "lsnrctl start listener"
I got following errors:
Failed to start service, error 5.
TNS-12536: TNS:operation would block
TNS-12560: TNS:protocol adapter error
TNS-00506: Operation would block
32-bit Windows Error: 997: Unknown error
I check listener log file, no new message is add to it.
My OS is window 2000 professional.
Oracle server version: 9.0.1.1.1
Thank you for some advice.
Julie

Hi,
I try to fix it by change log on setting by
setting the oracle service as 'this account' and
fill in account and password with system administrator
account information. Then all oracle services can work
properly. But with this setting the web application which
connect oracle database cannot login to database.
It may be the registry database of the machine get
corrupted.
How can I delete all oracle services and recreate the
them again, then will re-register the service information?
By the way, all other services in system are log on as
localsystem account, only oracle services does not allow
me set up as localsystem account, if I did that way, oracle service will not start and complain "error 5:
access is denied"
Thank you for give me some guide lines.
Julie

Dbstart cannot start Oracle server

The command dbstart cannot start the Oracle 8ir2 (8.1.6) server. It only shows the message "Database "ORCL" warm started.", but the oracle instance did not start nor database was not mounted. I have updated the /etc/oratab file to put Y to my database.
But the command dbshut can shutdown the oracle server.
Any help!!
I am running Redhat 6.2. The hardware is Athlon K7-750, 256MB Ram, ASUS K7V M/B, Voodoo 3.

The program svrmgrl of Oracle 8ir2 shows JServer Release 8.1.6.0.0 instead of PL/SQL (Version|Release) 8.1.? in the screen. Thus, I edit the dbstart script to change the line
/PL\/SQL (Release|Version)/ {substr($3,1,3) ;
to
/JServer (Release|Version)/ {substr($3,1,3) ;
to solve this problem.
Ed Cheng

CANNOT START ORACLE 10G IN OPENSUSE 11.1

Hallo!I managed to install successfully the Oracle 10g on OpenSUSE 11.1.
I have tried to configure the machine so that the Oracle listener and database start up when the computer boots by trying to open the /etc/oratab and trying to change the ‘N’ at the end to a ‘Y’.
Unfortunately,the /etc/oratab does not exist in my system.But I have been able to open YaST and Go to /etc/sysconfig Editor > Productivity > Databases > Tools > Oracle > DB and change the following to “yes”:
- START_ORACLE_DB
- START_ORACLE_DB_LISTENER
- START_ORACLE_DB_EMANAGER
- START_ORACLE_DB_ISQLPLUS
Unluckily,when I type the following commands at the terminal,I get the response that they (the commands) do not exist
a. Start Oracle listener – lsnrctl start
b. Start Enterprise manager services – emctl start dbconsole
c. Start iSQL *Plus – isqlplusctl start
d. Check if sqlplus is working:
sqlplus “connect / as sysdba“
How do I solve this problem?

Hallo!I am using openSUSE 11.1 i586.Moreover I installed Oracle 10g R2 from the zipped file 10201_database_linux32 .These are the steps I followed to install Oracle 10g into my Linux platform.I borrowed them from 2 web pages
Oracle_on_openSUSE || The URL-http://en.opensuse.org/Oracle_on_openSUSE
Installing Oracle 10g on openSUSE 10.3||The URL-http://tianawarner.blogspot.com/2008/08/installing-oracle-10g-on-opensuse-103.html
1)I ensured that the packages below have been installed first
-kernel-source
binutils
gcc
gcc-c++
glibc
libaio
libaio-devel
make
gnome-libs
libstdc++
libstdc++-devel
xscreensaver
sysstat
3)I then installed orarun
4)Log in as super user and go to /etc/profile.d/oracle.sh.Change the variable ORACLE_HOME to /home/JOEY
5) Configure the new oracle user.
a. Type passwd oracle in the terminal. Change the password for the oracle user.
b. Type rcoracle start to set kernel parameters. Ignore any errors.
c. Go to YaST > User Management. To see the oracle user, set the filter to System Users.
- Find the oracle user and click edit.
- Uncheck disable user login.
- Go to the details tab and make sure the login shell is set to /bin/bash.
7)Copy the oracle s/w from CD,unrar it and store unzipped folder as oracle on the Desktop
8)Modify the ‘certified versions’ section of the disk’s /install/oraparam.ini file, to add support for openSUSE 11.1. Just add SuSE-11 to the end of the line.
9)Set the DISPLAY. As administrator type in xhost +. Log in as the oracle user by typing su - oracle and then type export DISPLAY=:0
10)Set updated kernel parameters by executing rcoracle start.
11)Log out as root.Log in as normal user at the shell.Move into the oracle folder in the terminal and run ./runInstaller.
12)The OUI dialog box appeared,I entered the password in the two password entry text boxes.I left the default database as orcl.I never did any other command based configuration.Just used the OUI to proceed installation in the simplistic manner that one uses while installing Oracle in Windows.
13)I did get 2 errors (I cannot remember them)but I ignored them and proceeded to finish the Oracle installation.
14) I tried to Configure the machine so that the Oracle listener and database start up when the computer boots.
a. Type gedit /etc/oratab from root. Change the ‘N’ at the end to a ‘Y’.I tried this but could not find the oratab file.
b. Open YaST. Go to /etc/sysconfig Editor > Productivity > Databases > Tools > Oracle > DB. Change the following to “yes”:
- START_ORACLE_DB
- START_ORACLE_DB_LISTENER
- START_ORACLE_DB_EMANAGER
- START_ORACLE_DB_ISQLPLUS
15)I successfully implemented part b above
When I tried to perform the following checks:
a. Start Oracle listener – lsnrctl start
b. Start Enterprise manager services – emctl start dbconsole
c. Start iSQL *Plus – isqlplusctl start
d. Check if sqlplus is working:
sqlplus “connect / as sysdba“
I received the errors commands do not exist.
Please give me a correct step-by-step guide of how to install the Oracle.If I will need to uninstall my Oracle in order to install it correctly,please give me a step by step uninstallation guide.
Thanks in advance.

Cannot install Oracle BAM with Oracle XE 10.2.0.1

Hi,
I'm trying to install Oracle BAM 10.1.3.3.0 on Windows Server 2003 Enterprise Edition. I've previously installed Oracle DB XE edition (10.2.0.1.0) on another machine and checked all the software requirements.
I have no problem with the first installation step regarding Oracle Client for BAM. When relaunching setup.exe for installing the other components, I have the following error : "Database version at parameter#1, xxx.xxx.xxx.xxx:1521 should be 9.2.0.7 or higher, 10.1.0.5 or higher, 10.2.0.2 or higher."
However, according to the installation's guide:
"Oracle Database 10g Express Edition (Oracle Database XE) version 10.2.0.1.0 may
be used for non-production purposes. See the Oracle Database 10g Express Edition
Web site for more information "
So here is my question: Is Oracle BAM 10.1.3.3.0 really compatible with Oracle XE?
If so, any suggestions to resolve this issue will be most appreciated!
Thanks.

No Oracle XE is not compatible due to its version. Oracle BAM need 10.2.0.2 or higher as it comes in the POP Up while installation.
I also faced the same issue. Unfortuntely I could not find any version upgrade also for Oracle XE.
I hope this help!

Cannot start Oracle BI Scheduler service ---pls help.

Hi all,
I'm new in OBIEE.
I already installed and created some reports and dashboards in OBIEE. I found the problems that they are not updated data when new data loaded into DB.
I tried to start the Oracle BI Scheduler service but it has had the error like the message below;
"The description for Event ID ( 21 ) in Source ( Oracle BI Scheduler ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details.
The following information is part of the event: [68008] Scheduler Error: [nQSError: 67042] The Scheduler Configuration is incorrect.
[nQSError: 67004] Registry value for SchedulerScriptPath not set.."
Could anyone suggest me how would I be able to solve this error ?
Thank you in advance.
NNN

hi
First I do thank you for your answer quickly.
For now, I have tried to follow your suggestion but I found a new error when I start bi scheduler service.
==========================================================================================
The description for Event ID ( 21 ) in Source ( Oracle BI Scheduler ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [68008] Scheduler Error:
Current Table: S_NQ_JOB.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
Current Table: S_NQ_JOB_PARAM.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
Current Table: S_NQ_INSTANCE.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
Current Table: S_NQ_ERR_MSG.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed..
===================================================================
Any concern that I should know and how can I hanle this error ?
Thank you

Cannot start Oracle HTTP Server

Hi,
if I try to start the Oracle HTTP Server I get the following error message on the console:
C:\Oracle\product\11.1.1\as_1\instances\instance1\bin>opmnctl startproc ias-component=ohs1
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=bittest1:6703
0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=366744641,pid=1728)
Starten von verwaltetem Prozess nach der maximalen Anzahl der Wiederholungen
nicht erfolgreich
Log:
C:\oracle\product\11.1.1\as_1\instances\instance1\diagnostics\logs\OHS\ohs1\
console~OHS~1.log
In the log file I found this entry:
09/08/28 13:03:32 Start process
Apache.exe: Syntax error on line 1032 of C:\\oracle\\product\\11.1.1\\as_1\\instances\\instance1\\config\\OHS\\ohs1/httpd.conf: Syntax error on line 3 of C:/Oracle/product/11.1.1/as_1/instances/instance1/config/OHS/ohs1/mod_wl_ohs.conf: Cannot load C:/Oracle/product/11.1.1/as_1/ohs/modules/mod_wl_ohs.so into server: The specified module could not be found
But this module is definitive in this folder. What can I do?
Edited by: user8631539 on 28.08.2009 04:14

I have a workaround - If you are not planning to use mod_wl_ohs then don't load this module.
You can stop it loading by commenting below line from httpd.conf
include "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mod_wl_ohs.conf"
1. Go to
C:\\oracle\\product\\11.1.1\\as_1\\instances\\instance1\\config\\OHS\\ohs1/httpd.conf
2. change
# Include the configuration files needed for mod_weblogic
include "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mod_wl_ohs.conf"
to
# Include the configuration files needed for mod_weblogic
# include "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mod_wl_ohs.conf"
3. Restart HTTP Server
4. $ORACLE_BASE/admin/<instance_name>/bin/opmnctl restartproc ias-component=ohs1
Atul Kumar
http://onlineAppsDBA.com

Cannot start Oracle BI Server Service

I had installed Oracle Bussiness Intelligence 10g Release 2 version on my system....I was able to generate reports properly with the Default Repository(SH)....But When I created an OLAP repository and loaded it....It worked fine for a few minutes....then BI server service was automatically stopped....later when the service was restarted,it worked for 5 min but agin it got automatically stopped....but on attempting to restart the service again I got a error message ERROR 1068: Service cannot be be started because groups or dependencies not loaded....How can I reinstate the server process? I tried changing the repository to the default one but it didn't work....
Edited by: user10422576 on Oct 19, 2008 11:42 PM

I have seen similar errors when the repository is corrupt. Are you able to open the repository in offline mode ? In online mode, when you check consistencies, does it pass or does it throw any errors ? Also check the log files. if you are not getting enough information, try changing the loglevel for that user and then try it. usually this gives a good amount of info to debug.
Good Luck.
Dinesh Veera

Cannot start Oracle, Listener and EnterpriseManager

Hello all!
I am using Oracle 11g an I can't start them after I have installed updates for Windows Server 2003 64bit. Whenever I had rebooted my machiene the database had worked every time after startup. But this time it doesn't start.
When trying to start services OracleService[SID], OracleOraDb11g_home1TNSListener, OracleDBConsole[SID] and Oracle [SID] VSS Writer Service I get the error code 1053. I don't understand what happened.
I have done some research. I trace the startup of the services with Process Monitor. Starting the service
1. OracleService[SID] oracle.exe wants to access a file called oraclient11.dll within d:\oracle\product\11.1.0\db_1\bin. But there is no such file within the Oracle Base Directory.
2. OracleOraDb11g_home1TNSListener tnslsnr.exe wants to acces a file called oran11.dll within d:\oracle\product\11.1.0\db_1\bin. But there is no such file within the Oracle Base Directory.
3. OracleDBConsole[SID] nmesrvc.exe wants to access a file called orauts.dll within d:\oracle\product\11.1.0\db_1\bin. But this file is the directories db_1\bin\ctxhx, db_1\oui\bin and db_1\oui\lib\win64.
4. Oracle [SID] VSS Writer Service oravssw.exe wants to acces a file called oci.dll within d:\oracle\product\11.1.0\db_1\bin. But there is no such file within the Oracle Base Directory.
What went wrong? What can I do witohut re-installing the database in order to get working it?
Yavuz

Hi Hub!
There is no oraclient11.dll file in the d:\oracle directory and its subdirectories and also not in the system32 directoy. So I cannot rename it. The same is right for the other files mentioned in my first post.
I can't acces metalink. metalink.oracle.com forwards me to https://metalink.oracle.com/csp/ui/index.html which is not available (404) at this time.
For the ADR log files I'm not sure if I found the right files. I have extract the part of the files which are written after the reboot.
d:\oracle\diag\rdbms\[SID]\[SID]\alert\log.xml
<msg time='2008-11-03T18:46:14.922+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>
</txt>
</msg>
<msg time='2008-11-03T18:46:15.219+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.1.0.6.0 - Production
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> Time: 03-NOV-2008 18:46:15
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> Tracing not turned on.
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> Tns error struct:
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> ns main err code: 12638
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>TNS-12638: Abrufen der ID-Daten nicht erfolgreich
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> ns secondary err code: 0
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> nt main err code: 0
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> nt secondary err code: 0
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> nt OS err code: 0
</txt>
</msg>
d:\oracle\diag\rdbms\[SID]\[SID]\trace\alert_[SID].log
Mon Nov 03 18:46:14 2008
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.1.0.6.0 - Production
Time: 03-NOV-2008 18:46:15
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Abrufen der ID-Daten nicht erfolgreich
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
d:\oracle\diag\rdbms\[SID]\[SID]\trace\[SID]_ora_2028.trc
Trace file d:\oracle\diag\rdbms\[SID]\[SID]\trace\[SID]_ora_2628.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 2 - type 8664, 1 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:494M/2030M, Ph+PgF:3425M/5981M
Instance name: [SID]
Redo thread mounted by this instance: 1
Oracle process number: 0
Windows thread id: 2628, image: ORACLE.EXE (SHAD)
*** 2008-11-03 18:46:16.953
opiino: Attach failed due to ORA-12638
d:\oracle\diag\tnslsnr\[HOSTNAME]\listener\trace\log.xml
<msg time='2008-11-03T18:45:39.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:39 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:45:42.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:42 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:45:45.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:45 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:45:48.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:48 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:45:51.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:51 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:46:06.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:06 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:46:12.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:12 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:46:23.969+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:23 * service_died * [SID] * 12547
</txt>
</msg>
<msg time='2008-11-03T18:46:23.969+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>TNS-12547: TNS: Verbindung verloren
</txt>
</msg>
<msg time='2008-11-03T18:46:25.969+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:25 * (CONNECT_DATA=(SID=[SID])(CID=(PROGRAM=D:\Oracle\product\11.1.0\db_1\bin\emagent.exe)(HOST=[HOSTNAME])(USER=OraUser))) * (ADDRESS=(PROTOCOL=tcp)(HOST=[IP])(PORT=3260)) * establish * [SID] * 12505
</txt>
</msg>
<msg time='2008-11-03T18:46:26.000+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>TNS-12505: TNS: Listener kann in Connect-Deskriptor angegebene SID aktuell nicht auflösen
</txt>
</msg>
<msg time='2008-11-03T18:46:31.016+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:31 * (CONNECT_DATA=(SID=[SID])(CID=(PROGRAM=D:\Oracle\product\11.1.0\db_1\bin\emagent.exe)(HOST=[HOSTNAME])(USER=OraUser))) * (ADDRESS=(PROTOCOL=tcp)(HOST=[IP])(PORT=3262)) * establish * [SID] * 12505
</txt>
</msg>
<msg time='2008-11-03T18:46:31.016+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>TNS-12505: TNS: Listener kann in Connect-Deskriptor angegebene SID aktuell nicht auflösen
</txt>
</msg>
d:\oracle\diag\tnslsnr\[HOSTNAME]\listener\trace\listener.log
Mon Nov 03 18:46:06 2008
03-NOV-2008 18:46:06 * service_update * [SID] * 0
03-NOV-2008 18:46:12 * service_update * [SID] * 0
Mon Nov 03 18:46:23 2008
03-NOV-2008 18:46:23 * service_died * [SID] * 12547
TNS-12547: TNS: Verbindung verloren
03-NOV-2008 18:46:25 * (CONNECT_DATA=(SID=[SID])(CID=(PROGRAM=D:\Oracle\product\11.1.0\db_1\bin\emagent.exe)(HOST=[HOSTNAME])(USER=OraUser))) * (ADDRESS=(PROTOCOL=tcp)(HOST=[IP])(PORT=3260)) * establish * [SID] * 12505
TNS-12505: TNS: Listener kann in Connect-Deskriptor angegebene SID aktuell nicht auflösen
03-NOV-2008 18:46:31 * (CONNECT_DATA=(SID=[SID])(CID=(PROGRAM=D:\Oracle\product\11.1.0\db_1\bin\emagent.exe)(HOST=[HOSTNAME])(USER=OraUser))) * (ADDRESS=(PROTOCOL=tcp)(HOST=[IP])(PORT=3262)) * establish * [SID] * 12505
TNS-12505: TNS: Listener kann in Connect-Deskriptor angegebene SID aktuell nicht auflösen
I hope you can see what was going wrong.
Yavuz

Cannot start Oracle 8.1.5 on Windows XP Pro

Hi all,
I am facing a hell lot of problem in starting an Oracle 815 ( Enterprise edition ) database installed on WindowsXP Pro.
First problem is that , I am a Unix person and very less familier with Windows servers .
I have successfully ( appearently ) installed Oracle 8.1.5 Enterprise edition on my Laptop with Windows XP Pro.
In the service manager I can see the created services , like for the database , listener etc.
I have set all of them to be started manually .
When I try to start the database service ( instance ) , a progress bar appears as the service is being started .
As the progress bar progresses , its progress becomes slower and slower , at the end it stops saying ,
Could not start the OracleService<sid of db> service on Local Computer
Error 1053: The service did not respond to the start or control request in a timely fashion.
In the service manager the status of the service becomes 'starting' and thats it . It do not allow to start or stop that service after that .
Is there any log or trace I can see for this ?
If I start the listener service , it starts immediatly .
Please advice .

Hi ,
I have just installed the latest OLEDB (OraWin9204) And ODBC (ora9205) Providers on my laptop using Oracle9i Personal Edition on Windows XP Prof. Now im getting this same error message. (service did not start in a timely fasion)
If i try and run the oracle service from the command line i get more of a clue.
\oraHome\bin\oracle.exe <service name>
the following error message appears :
The procedure entry point qmxdCvtXtobToSax could not be located in the dynamic link library orageneric9.dll
this is located in the \oraHome\bin directory
i have unpacked all of the jar files and had a look through them and i definatley have the latest orageneric9.dll that i can find which is :
Date = 08/08/2003 : 12:39
size = 2,638,096
does anyone have a newer version of this file ?

Cannot Start Oracle BAM ADC

Similar Messages

Maybe you are looking for