Cannot stop animaiton in order to put a button

Hi i cannot stop my animaiton in order for me to put a start button to make the animaitoin start when the start button is clicked on. I put the code stop(); into one of the begining frames but it still played . I am using action script 3 on CS4
This is the frames i have and the code i tried to put in
I also uploaded half of my animation in .fla format but its ziped

I downloaded your file and ran it, no problem--it stops, doesn't go anywhere.
There isn't any code other than the stop(); command.
I created a new layer for your actions and put this in:
stop();
stage.addEventListener(MouseEvent.CLICK, driveOff);
function driveOff(event:MouseEvent):void{
stage.removeEventListener(MouseEvent.CLICK, driveOff);
gotoAndPlay(2);
works fine...I attched the file.
HTH
-Ted

Similar Messages

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

Cannot stop playlist shuffling

I cannot stop songs in a playlist from shuffling. I have turned it off on and off again on pc and then updated iPod. Have turned it off on the iPod itself but although there is no shuffle icon showing the songs still randomly select and will not just follow the order 1, 2, 3 etc. What have I done wrong?
iPod nano Windows XP

Welcome to Apple Discussions!
Is it skipping songs and not playing them? Like going from 1 of X to 4 of X? Or is the 4th song listed as 2 of X when playing it, for example.
Have you tried resetting the iPod?
Reset iPod
btabz

Cannot stop looping

Hi
I'm have imported a 30 second clip for the menu screen but I cannot stop it looping after only 10 seconds of play. Menu Info only acknowledges the first 10 seconds of the clip.
Perhaps I'm missing something very obvious....
tia
k

Kinda solved!
I put a 30 second silent sound file which adjusted the movie length to 30 seconds.
An odd workaround for an odd problem.
Still, why didn't it adjust to the movie clip length????

I cannot copy a page that i put on top of the printer

Cannot copy a sheet that I put on top of the printer

Hi I hope you are doing well and welcome to the HP forum;
I wlll love to help you but in order for me or any other member of the fuum to have an opportunity to assist you we need more information in regards your configuration such as, Complete printer model, Operating system and any other information that you feel is useful. This way more people will have a clear idea on how to properly offer you suggestions. Please take the time to read this POST before updating your thread again.
I will do my best ot assist you just need a bit more information;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

IPad 2, iOS 7.0.6, cannot stop music from shuffling

I cannot stop the Music app from shuffling songs. I have tried the suggestions offered in related threads (such as navigating to the Now Playing screen, tapping the album cover, etc.) but those suggestions refer to buttons which do not appear on my screen.
Thank you.

You may ignore my question. I installed iOS 7.1 and the songs reverted to proper order.

HT1689 why is rental movie from itunes taking hours yo download. 5.5 gigabites. cannot stop download

trying to down load a movie on my new expensive I pad. Taking hours. Says 5.5 gb cannot stop the download either

The time it takes is dependent on your internet speed. Check www.speedtest.net
6mbps is required for instant HD (you can switch to SD in the settings)
As said above ATV does not store content. Turning off or accessing other content will indeed flush the rental (requiring reload)
Netflix uses a different system where it streams instantly and adapts based on your connection. iTunes is quality is fixed and will only start once enough has buffered in order to play without inturruption.
The suggestion about renting via the computer is appropriate if on a slow connection or if you wish to store for later viewing.

Yosemite extremely slow. Cannot stop pop up windows

Yosemite extremely slow. Cannot stop pop up windows on any browsers. Considering going back to Maverick My iMack is mid 2011 21.5. I cannot find a solution to this problem

Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
These may be helpful in improving Yosemite's performance.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

Retrieving all values from hashmap in order you put them in

Hi guys,
I want to retrieve all values from a HashMap in the order I put them in.
So I can't use the values() method that gives back a collection and iterate over that.
Do you guys know a good way to do that ?

You can just do something like this:
class OrderedMap
    private final Map m_rep = new HashMap();
    private final List m_keys = new ArrayList();
    public Object get( final Object key )
        return m_rep.get( key );
    public Object put( final Object key, final Object value )
        final Object result = m_rep.put( key, value );
        if ( result != null )
            m_keys.add( key );
        return result;
    public Object remove( final Object key )
        final Object result = m_rep.remove( key );
        if ( result != null )
            m_keys.add( key );
        return result;
    public Iterator keyIterator()
        return m_rep.iterator();
}Then use it like this:
   for ( Iterator it = map.keyIterator(); it.hasNext(); )
       final Object value = map.get( it.next() );
   }This will be in the order you put them in. However, if you want to do this correctly, you should implement the Map interface and add all the methods. Another thing you can do is download the JDK 1.4 source, learn how they did and do it the same way for 1.2.
R.

Cannot stop Adobe Message coming up

Hello
I keep getting a message coming up on my screen from Adobe Flash Player and I cannot stop it !
The message is as follows:
A website wants to open web content using this program on your computer.
This program will open outside of protected mode. Internet Exporer protected mode helps protect your computer.
If you do not trust this website, do not open this program
Adobe Flash Player
Adobe Systems Incorporated
It doesn't matter whether I press yes allow or do not allow - it still keeps coming up - I have had this problem for a few weeks now and I have run my Anti Virus software and Malware etc, but to no joy - it still keeps coming up.
I don't think that it is coming from yourselves - I think it is a virus?
My operating system is Windows 7 64 bit
And I use Internet Explorer
Can anyone please help me get rid of it?
I have done a screen print if there is anyway I can send you it?
Thank you and kind regards

Hi - thanks for your reply. I looked at my 'protected mode' to see if it was enabled in IE's Internet Options and it was already 'checked'
I have been trying to post my screenshot by clicking the camera icon in this toolbar, but when I browse my documents and click on insert image - a message comes up saying 'the content type of this image is not allowed' !
It is a WordDoc2007 (*docx) or a .wps extension which is a Microsoft Works document and no matter which image I try to 'insert' - the message is still the same.
I am desperate now because no matter what website I go on - your message comes up - and everytime the website is loading it comes up quite a few times when a page is loading. Even while I've been doing this reply to you - everytime I click on a link to take me somewhere on the site - it comes up!
Perhaps if I can send you the screenshot by email - it may work? At least then you would be able to see the screenshot?
I have just thought about sending you the screenshot as a picture, but I don't have 'Paint' - any ideas would be appreciated.
Thank you and kind regards

HT204053 Seems my iCloud password is not the same as my iTunes. Where do I go to reset my iCloud password? I cannot access anything when prompted to put in my iCloud password because I do NOT KNOW it. Thanks!

Seems my iCloud password is not the same as my iTunes. Where do I go to reset my iCloud password? I cannot access anything when prompted to put in my iCloud password because I do NOT know it. Thanks! I've used my iTunes password for everything else Apple does and would like to use the same one for my iCloud.

Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

HT1338 I need to update my software in order to download the new version of iTunes in order to put songs on my new iPod. But my software doesn't need updating..or so my computer says. What should I do??

I need to update my software in order to download the new version of iTunes in order to put songs on my new iPod. But my software doesn't need updating..or so my computer says. What should I do??

If your iMac has a PowerPC processor, Leopard OS 10.5.x is the max OS. If your iMac has an Intel processor, it can run Snow Leopard OS 10.6.x or possibly higher.
Once we know your iMac model, we can better recommend what OS X version.
 Cheers, Tom

How to stop the prodution order creating when the product is not valued?

Hi guyes:
How to stop the prodution order creating when the product is not valued using CO01?
I hope that when i create the production order,the system will check the product is valued or not,if not
the system will show an error or warning message!
How to config for this?
Thank you!

Dear Zhao Gang,
Check with this user Exits mentioned in this link,
Prevent Production Order from "Release" if there is no Cost Estimate
Re: User Exit at Production Order Release
Check and revert back.
Regards
Mangalraj.S

HT1925 I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes

I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes. Is there any other way I can accomplish an upgrade without using the Itunes.msi file?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Cannot stop animaiton in order to put a button

Similar Messages

Maybe you are looking for