Cannot store complete internal data error

Hello Diadem gurus,
I have some tdms files that I am post processing. I use diadem for that purpose. Some files cause the error "cannot store complete internal data error in the file."
See the attached picture. I assume it may be caused by my page file or a setting within Diadem. Any suggestions on how to prevent this?
Nasty detail is that the source files were actually lost! (I am saving changes made with diadem back into the same file, but in reality it simply overwrites the file.)
Attachments:
diadem error.JPG ‏17 KB

Hi aartjan,
There were a number of improvements made to the TDMS DataPlugin, which debuted with DIAdem 10.1.  These improvements are available for download at www.ni.com/dataplugins for DIAdem 10.1 users.  However, there was one fix made that was too extensive to backport to the DIAdem 10.1 codebase, and this I believe is the one you need.  This last fix regarded the saving of enormous TDMS files.  The TDMS DataPlugin which shipped with DIAdem 10.1 expected to fit all the data values into memory at one time.  The TDMS DataPlugin which ships with DIAdem 10.2 Beta3 is able to buffer the data values to disk, therefore not requiring the entire file to fit in memory in order to succeed in exporting it to TDMS file.
The good news is that if you install DIAdem 10.2 Beta3 you will get the DIAdem 10.2 USI layer along with the correct TDMS DataPlugin.  Then even if you uninstall DIAdem 10.2 Beta3, the newer USI and TDMS DataPlugin will remain and work correctly with your DIAdem 10.1.  You can get the DIAdem 10.2 Beta3 by visiting the www.ni.com/beta website and requesting to participate in the DIAdem 10.2 Beta program.  Once you have requested this, remind me to activate your Beta profile, after which you will be able to download the installer.
Regards,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

  • Diadem Error: Cannot Store Complete Internal Data

    I am trying to save data in my portal to a TDM, but I get the error: "Cannot store complete internal data in the file "FILENAME.TDM" with the format "TDM".  I'm not sure how to diagnose the problem, since the error does not provide much information.
    I have a script that pulls together two seperate files, a *.dat and an *.atfx file.  It searches through the data to find certain measurments, and then averages a few channels and adds these averages to a new group. I have 16 groups and 257 channels.  The file is fairly large, so maybe I am exceeding some limits? 
    Any ideas? 
    Thanks.

    Perhaps this is related.  While I have the data loaded that cannot be saved in the TDM, and I am browsing he help file.  I get an error claiming that there is not enough memory for this task.  I click ok and diadem abruptly closes.  I have attached a screen shot of the error, also showing available system resources, and it seems like I should have plenty available.  I have 1.5GB of available memory, and 46GB of available disk space.  Why am I getting this error.  Is there some setting that limits how much resources diadem can use? 
    I have also attached a screen shot showing system resources AFTER diadem closed. 
    Attachments:
    Not enough memory error.JPG ‏190 KB
    Not enough memory error - Post diadem close.JPG ‏74 KB

  • Cannot Store Complete Internal Data in the File "blah Bla" with format ""

    Very Unexpected error.
    Not sure what to do with this.
    See attached file.
    I have Diadem Advanced v12
    Tim
    Solved!
    Go to Solution.
    Attachments:
    Untitled2.png ‏7 KB

    I tried saving it in TDMS and TDM.
    I was able to save it in excel so I was able to save my data.
    Tim

  • An FTP error occurred - cannot put [file name.htm]. Dreamweaver encountered an internal data error

    I get the message “Server not responding” whenever trying to add files to my web site via DW. The following message appears: "An FTP error occurred - cannot put [file name.htm]. Dreamweaver encountered an internal data error. Please try the operation again." 
    I called the hosting service provider, and they said they were able to upload a 20 mb document with no problem. I was also able to upload a document using Filezilla.
    Therefore, the problem must be with DW.
    When I go to Manage Sites and choose my site and get to the Test Connection button, the test is successful, which further confuses the issue.
    Any guidance would be greatly appreciated. 

    Does this help?
    http://forums.adobe.com/thread/861606
    Also check the log:
    http://forums.adobe.com/thread/937231
    It is possible it is a host issue but because they use a higher level account to test that they do not see the error.

  • Dreamweaver encountered an internal data error (CS5.5, OSX 10.7.2)

    Sometimes it works perfectly, other times I get an error.  The strange thing is that I'm using the same site setup in both cases.  It doesn't matter which file or files I'm trying to upload to the remote server.  No problem copying the same files from the local directory to the remote server using an independent FTP client with the same site settings.  Can someone tell me what usually causes the following error? I'm new to Dreamweaver (CS5.5, Mac OSX10.7.2) and have no idea how to proceed.
    Started: 12/13/11 10:15 AM
    553 Could not create file. 
    My_Equipment.htm - error occurred - An FTP error occurred - cannot put My_Equipment.htm.  Dreamweaver encountered an internal data error.  Please try the operation again.
    File activity incomplete. 1 file(s) or folder(s) were not completed.
    Files with errors: 1
    My_Equipment.htm
    Finished: 12/13/11 10:15 AM

    Is that from the FTP log?  A 553 FTP error is bad permissions.  You are going to need to explain more about your setup to troubleshoot.
    -FTP connection type you are using (SFTP, FTPS, FTP, etc.)
    -Server type (Win/Linux)
    -Web host (this is a strange one but there is an issue with some larger hosts using invalid SSL certificates like Godaddy)
    Also is it only with the one file or all files/folders?

  • Error message: internal data error

    Dreamweaver CS5 worked perfectly until this morning, when I keep getting error message: An FTP error encountered, cannot link to host. Encountered an internal data error. What's happening?

    The full error message reads: “An FTP error occurred - cannot make connection to host. Dreamweaver encountered an internal data error. Please try the operation again.”
    I called Network Solutions, who is the host. I opened the Site/Manage site/hiddengardensteps/edit and found the material. I then clicked the “servers” which gave me a box with FTP server and password. The Network Solutions techies told me to change the password, which I did, and the second NS person told me to wait 15 min - 4 hours for the syncing to work.
    I get the same error massage now for bikenfly.org which is hosted by Earthlink. What to do?
    Thanks for the quick comeback.
    Liz

  • Cannot copy 2010NT_Disk1[1]: Data error (cyclic redunancy check).

    Hi,
    I have now twice tried to dl the Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP. With the file 92010NT_Disk1.zip I get the Error message as indicated below. The dl itself takes about 3hrs with my connection, so I rather not try it again unless I know for sure it is going to work.
    - Server name: http://otn.oracle.com/software/products/oracle9i/htdocs/winsoft.html
    - Filename: 92010NT_Disk1.zip
    - Date/Time: June 27, ~6am CET
    - Browser + Version: IE5
    - O/S + Version: Win 2000
    - Error Msg: Cannot copy 2010NT_Disk1[1]: Data error (cyclic redunancy check).
    What to do?
    /Claes

    That is what I am doing in effect. I downloaded the Collection from the trial page on the Adobe site. Then created DVDs from that download. It is when copying the files from the DVD that I get the error message. Could there be a problem with my download? If so how do I check?

  • Internal data error when uploading images

    I have had no problem uploading files and images. Now, I can
    upload files, but when I try to upload an image I get FTP error -
    internal data error. I also connected directly to my server and
    tried to transfer images, but that didn't work either. Does anybody
    know what could be causing this?

    On Sun, 15 Oct 2006 18:26:07 +0000 (UTC),
    "nolonger_marchetti"
    <[email protected]> wrote:
    >I have had no problem uploading files and images. Now, I
    can upload files, but
    >when I try to upload an image I get FTP error - internal
    data error. I also
    >connected directly to my server and tried to transfer
    images, but that didn't
    >work either. Does anybody know what could be causing
    this?
    I've never heard of this, but two things come to mind.
    1) Is a file in question opening being edited in another
    application?
    2) Have you tried passive FTP?
    hth

  • Uploading pages to FTP - Get error of internal data error

    I had malware on my computer and had to redo the whole computer and reinstall Dreamweaver CS5. I have not had to redo this for 4 years and in the process ..none of my pages will upload with Dreamweaver as before. All I did was update my pictures like I do every month. I got some of the text updated on the web using Filezilla, but the Dreamweaver upload will not work..I get the Dreamweaver internal data error sign.
    What am I doing wrong?
    My web site is www.williamshomesteadranch.com
    The index page, contact us page, well done page, and infor links pages uploaded ok with Filezilla, but the none will  upload with Dreamweaver. Filezilla uploaded all but the new pictures on the other pages.
    Please help!
    Sue

    > I'd like to know if there is a fix out there
    We haven't identified the source of the problem yet. I have
    no trouble
    uploading PDFs with any version of DW, so I would be
    profoundly surprised if
    this were a DW problem.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Mustang151" <[email protected]> wrote in
    message
    news:eggkcj$gpt$[email protected]..
    > I've just recently encountered a similar problem with
    uploading PDF's
    > through
    > Dreamweaver. All other file types upload just fine, but
    the PDF's give an
    > 'internal data error'. I'd like to know if there is a
    fix out there, or
    > pending, as I really would like to avoid having to use a
    different FTP
    > client
    > to upload one file type. I have the most recent
    Dreamweaver MX2004 update,
    > which doesn't seem to have fixed the problem. Any
    further suggestions?
    >

  • "dreamweaver encountered an internal data error" - can't connect to server (CS6)

    Since last week I can't connect to all of my websites using Dreamweaver. When I click on connect or switch to the server view I instantly get the error message "dreamweaver encountered an internal data error".
    The websites are on different servers and I can connect to each of them using another FTP Software like SmartFTP.
    I already used google and found some "solutions" like checking the "FTP timeout time". But even a timeout time of 60 seconds instantly brings the error message.
    Also I tried a fresh install of Dreamweaver yesterday but this doesn't help.
    OS is Windows 8 Pro x64
    Any advice would be great because I can't work without Dreamweaver.

    Which Anti-virus and Firewall are you using?
    When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
    http://forums.adobe.com/thread/494811
    If that doesn't help, try Restore Preferences
    http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
    If all else fails, use the CC Cleaner Tools below followed by a software re-install.
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Nancy O.

  • Internal data error possibly because of failure to start the upload

    This happens when i try and PUT a new file to the remote server.
    If i PUT an existing file it works??
    Please help!!

    Hi PNM,
    Copying from the document http://helpx.adobe.com/dreamweaver/kb/troubleshoot-ftp-problems-dreamweaver-cs4.html
    If you're receiving an "Internal Data Error" message when trying to connect in Dreamweaver, it's likely that the server is down. A good way to determine if the server is down is to see if you can connect with a different FTP client. If no client can connect, then there's probably something wrong with the server.

  • Internal data error

    i keep getting an internal data error on dreamweaver mx when
    i try to ftp. Anyone any ideas?

    That error usually means the server has a problem. Verify and
    see if
    another FTP client can connect.
    Troubleshooting FTP issues
    http://www.adobe.com/go/tn_14834
    David Alcala
    Adobe Product Support

  • Ipod cannot be synced internal device error

    This has been very aggravating for me for a while now. I've been trying to sync music on my ipod touch, but I keep getting a message that says "ipod cannot be synced internal device error". I tried to restore my touch and I even downloaded the latest updates ..but no use. Every time i try to sync.. I get the same message..I'm starting to give up hope. I've searched everywhere and can't find a solution. My ipod touch syncs on my desktop.. but not on my laptop(contains all my music). If I can get a solution, it would be much appreciated. Thanks.

    Welcome to the discussions,
    did you check your security software settings? http://support.apple.com/kb/TS3125
    Did you restore "as new ipod" without using the backup to restore afterwards?

  • Dreamweaver CS6 - internal data error - PLEASE HELP!

    Hi,
    I'm experiencing an internal data error on Dreamweaver CS6.
    I've tried all the things on the forums like deleting your cache, if that's not working deleting the whole cs6 folder, I've reinstalled and still its happening.
    Very frustrating, need to update clients websites and I can not connect.
    Please help!!!!
    Regards Stephanie

    Which operating system?
    Is DW installed on your primary hard drive?
    When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
    http://forums.adobe.com/thread/494811
    If that doesn't help, try Restore Preferences
    http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
    If all else fails, use the CS Cleaner Tools below to wipe CS6 off your hard drive followed by a software re-install.
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Nancy O.

  • Ftp error - internal data error

    Can anyone help me???
    I have several computers. On the primary computer I use,
    Dreamweaver says when I am trying to connect to a server that there
    is an internal data error. What does that mean and what can I do
    about it. I have no problems connecting through ftp on other
    computers.
    Thanks,
    JESAMPL

    When you go to the Remote site definition (Advanced tab) and
    click on the
    Test button, what happens?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "jesampl" <[email protected]> wrote in
    message
    news:e2drgp$g2i$[email protected]..
    > Can anyone help me???
    >
    > I have several computers. On the primary computer I use,
    Dreamweaver says
    > when
    > I am trying to connect to a server that there is an
    internal data error.
    > What
    > does that mean and what can I do about it. I have no
    problems connecting
    > through ftp on other computers.
    >
    > Thanks,
    > JESAMPL
    >

Maybe you are looking for

  • Slow wechat on iphone6p

    updated latest iphone6p os, then my wechat app become very slow, barely usable. please help. thank you very much

  • IPhone 4 no sound, what to do ?

    Hi there, I have a problem with my iphone 4. i bought it some month ago (last november) and this problem happened many time but now i'm sick of it... The problem is that my iphone lost all sound (and it not the switch on the left side). When i try to

  • Data Replication Basics missing

    Hi Experts, Im on MDG 6.1. when i go through the blogs and forums i understood that data replication can be configured by Step 1) Perform ALE settings. step 2) in DRFIMG - define o/b implementation -define replication model (attach the o/b implementa

  • How to switch database

    Hello Friends, I am new to Oracle & I am using oracle Enterprise Manager Console for creating a new database.While creating new database it asks for Hostname & SID.The Hostname of my system is neha & SID is also neha.So The name of new database is ap

  • Old versions of arch?

    Right to the point, I'm looking for old versions of arch linux for download. I have a pentium 3 system I'm trying to get it to load onto, and for whatever reason, the most recent version doesn't seem to like some of my hardware and I wondered if an o